selinux_inode_init_security computes transitions sids even for filesystems
that use mount point labeling.  It shouldn't do that.  It should just use
the mount point label always and no matter what.

This causes 2 problems.  1) it makes file creation slower than it needs to be
since we calculate the transition sid and 2) it allows files to be created
with a different label than the mount point!

# id -Z
staff_u:sysadm_r:sysadm_t:s0-s0:c0.c1023
# sesearch --type --class file --source sysadm_t --target tmp_t
Found 1 semantic te rules:
   type_transition sysadm_t tmp_t : file user_tmp_t;

# mount -o loop,context="system_u:object_r:tmp_t:s0"  /tmp/fs /mnt/tmp

# ls -lZ /mnt/tmp
drwx------. root root system_u:object_r:tmp_t:s0       lost+found
# touch /mnt/tmp/file1
# ls -lZ /mnt/tmp
-rw-r--r--. root root staff_u:object_r:user_tmp_t:s0   file1
drwx------. root root system_u:object_r:tmp_t:s0       lost+found

Whoops, we have a mount point labeled filesystem tmp_t with a user_tmp_t
labeled file!
Signed-off-by: NEric Paris <eparis@redhat.com>
Reviewed-by: NReviewed-by: James Morris <jmorris@namei.org>

We duplicate functionality in policydb_index_classes() and
policydb_index_others().  This patch merges those functions just to make it
clear there is nothing special happening here.
Signed-off-by: NEric Paris <eparis@redhat.com>

The sym_val_to_name type array can be quite large as it grows linearly with
the number of types.  With known policies having over 5k types these
allocations are growing large enough that they are likely to fail.  Convert
those to flex_array so no allocation is larger than PAGE_SIZE
Signed-off-by: NEric Paris <eparis@redhat.com>

In rawhide type_val_to_struct will allocate 26848 bytes, an order 3
allocations.  While this hasn't been seen to fail it isn't outside the
realm of possibiliy on systems with severe memory fragmentation.  Convert
to flex_array so no allocation will ever be bigger than PAGE_SIZE.
Signed-off-by: NEric Paris <eparis@redhat.com>

selinuxfs carefully uses i_ino to figure out what the inode refers to.  The
VFS used to generically set this value and we would reset it to something
useable.  After 85fe4025 each filesystem sets this value to a default
if needed.  Since selinuxfs doesn't use the default value and it can only
lead to problems (I'd rather have 2 inodes with i_ino == 0 than one
pointing to the wrong data) lets just stop setting a default.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NJames Morris <jmorris@namei.org>

security_netlbl_secattr_to_sid is difficult to follow, especially the
return codes.  Try to make the function obvious.
Signed-off-by: NEric Paris <eparis@redhat.com>

selinuxfs.c has lots of different standards on how to handle return paths on
error.  For the most part transition to

	rc=errno
	if (failure)
		goto out;
[...]
out:
	cleanup()
	return rc;

Instead of doing cleanup mid function, or having multiple returns or other
options.  This doesn't do that for every function, but most of the complex
functions which have cleanup routines on error.
Signed-off-by: NEric Paris <eparis@redhat.com>

selinuxfs.c has lots of different standards on how to handle return paths on
error.  For the most part transition to

	rc=errno
	if (failure)
		goto out;
[...]
out:
	cleanup()
	return rc;

Instead of doing cleanup mid function, or having multiple returns or other
options.  This doesn't do that for every function, but most of the complex
functions which have cleanup routines on error.
Signed-off-by: NEric Paris <eparis@redhat.com>

policydb.c has lots of different standards on how to handle return paths on
error.  For the most part transition to

	rc=errno
	if (failure)
		goto out;
[...]
out:
	cleanup()
	return rc;

Instead of doing cleanup mid function, or having multiple returns or other
options.  This doesn't do that for every function, but most of the complex
functions which have cleanup routines on error.
Signed-off-by: NEric Paris <eparis@redhat.com>

The addition of CONFIG_SECURITY_DMESG_RESTRICT resulted in a build
failure when CONFIG_PRINTK=n.  This is because the capabilities code
which used the new option was built even though the variable in question
didn't exist.

The patch here fixes this by moving the capabilities checks out of the
LSM and into the caller.  All (known) LSMs should have been calling the
capabilities hook already so it actually makes the code organization
better to eliminate the hook altogether.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves.  For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Include vmalloc.h for vmalloc_user (fixes ppc build warning).
Acked-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

/selinux/policy allows a user to copy the policy back out of the kernel.
This patch allows userspace to actually mmap that file and use it directly.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

There is interest in being able to see what the actual policy is that was
loaded into the kernel.  The patch creates a new selinuxfs file
/selinux/policy which can be read by userspace.  The actual policy that is
loaded into the kernel will be written back out to userspace.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

AVTAB_MAX_SIZE was a define which was supposed to be used in userspace to
define a maximally sized avtab when userspace wasn't sure how big of a table
it needed.  It doesn't make sense in the kernel since we always know our table
sizes.  The only place it is used we have a more appropiately named define
called AVTAB_MAX_HASH_BUCKETS, use that instead.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Range transition rules are placed in the hash table in an (almost)
arbitrary order.  This patch inserts them in a fixed order to make policy
retrival more predictable.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

With the (long ago) interface change to have the secid_to_secctx functions
do the string allocation instead of having the caller do the allocation we
lost the ability to query the security server for the length of the
upcoming string.  The SECMARK code would like to allocate a netlink skb
with enough length to hold the string but it is just too unclean to do the
string allocation twice or to do the allocation the first time and hold
onto the string and slen.  This patch adds the ability to call
security_secid_to_secctx() with a NULL data pointer and it will just set
the slen pointer.
Signed-off-by: NEric Paris <eparis@redhat.com>
Reviewed-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Right now secmark has lots of direct selinux calls.  Use all LSM calls and
remove all SELinux specific knowledge.  The only SELinux specific knowledge
we leave is the mode.  The only point is to make sure that other LSMs at
least test this generic code before they assume it works.  (They may also
have to make changes if they do not represent labels as strings)
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NPaul Moore <paul.moore@hp.com>
Acked-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NJames Morris <jmorris@namei.org>

All security modules shouldn't change sched_param parameter of
security_task_setscheduler().  This is not only meaningless, but also
make a harmful result if caller pass a static variable.

This patch remove policy and sched_param parameter from
security_task_setscheduler() becuase none of security module is
using it.

Cc: James Morris <jmorris@namei.org>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

This patch fixes up coding-style problem at this commit:

 4f27a7d49789b04404eca26ccde5f527231d01d5
 selinux: fast status update interface (/selinux/status)
Signed-off-by: NKaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Replace EXTRA_CFLAGS with ccflags-y.
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

While the previous change to the selinux Makefile reduced the window
significantly for this failure, it is still possible to see a compile
failure where cpp starts processing selinux files before the auto
generated flask.h file is completed.  This is easily reproduced by
adding the following temporary change to expose the issue everytime:

-      cmd_flask = scripts/selinux/genheaders/genheaders ...
+      cmd_flask = sleep 30 ; scripts/selinux/genheaders/genheaders ...

This failure happens because the creation of the object files in the ss
subdir also depends on flask.h.  So simply incorporate them into the
parent Makefile, as the ss/Makefile really doesn't do anything unique.

With this change, compiling of all selinux files is dependent on
completion of the header file generation, and this test case with
the "sleep 30" now confirms it is functioning as expected.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Selinux has an autogenerated file, "flask.h" which is included by
two other selinux files.  The current makefile has a single dependency
on the first object file in the selinux-y list, assuming that will get
flask.h generated before anyone looks for it, but that assumption breaks
down in a "make -jN" situation and you get:

   selinux/selinuxfs.c:35: fatal error: flask.h: No such file or directory
   compilation terminated.
   remake[9]: *** [security/selinux/selinuxfs.o] Error 1

Since flask.h is included by security.h which in turn is included
nearly everywhere, make the dependency apply to all of the selinux-y
list of objs.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

This patch provides a new /selinux/status entry which allows applications
read-only mmap(2).
This region reflects selinux_kernel_status structure in kernel space.
  struct selinux_kernel_status
  {
          u32     length;         /* length of this structure */
          u32     sequence;       /* sequence number of seqlock logic */
          u32     enforcing;      /* current setting of enforcing mode */
          u32     policyload;     /* times of policy reloaded */
          u32     deny_unknown;   /* current setting of deny_unknown */
  };

When userspace object manager caches access control decisions provided
by SELinux, it needs to invalidate the cache on policy reload and setenforce
to keep consistency.
However, the applications need to check the kernel state for each accesses
on userspace avc, or launch a background worker process.
In heuristic, frequency of invalidation is much less than frequency of
making access control decision, so it is annoying to invoke a system call
to check we don't need to invalidate the userspace cache.
If we can use a background worker thread, it allows to receive invalidation
messages from the kernel. But it requires us an invasive coding toward the
base application in some cases; E.g, when we provide a feature performing
with SELinux as a plugin module, it is unwelcome manner to launch its own
worker thread from the module.

If we could map /selinux/status to process memory space, application can
know updates of selinux status; policy reload or setenforce.

A typical application checks selinux_kernel_status::sequence when it tries
to reference userspace avc. If it was changed from the last time when it
checked userspace avc, it means something was updated in the kernel space.
Then, the application can reset userspace avc or update current enforcing
mode, without any system call invocations.
This sequence number is updated according to the seqlock logic, so we need
to wait for a while if it is odd number.
Signed-off-by: NKaiGai Kohei <kaigai@ak.jp.nec.com>
Acked-by: NEric Paris <eparis@redhat.com>
--
 security/selinux/include/security.h |   21 ++++++
 security/selinux/selinuxfs.c        |   56 +++++++++++++++
 security/selinux/ss/Makefile        |    2 +-
 security/selinux/ss/services.c      |    3 +
 security/selinux/ss/status.c        |  129 +++++++++++++++++++++++++++++++++++
 5 files changed, 210 insertions(+), 1 deletions(-)
Signed-off-by: NJames Morris <jmorris@namei.org>

type is not used at all, stop declaring and assigning it.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

tty: fix fu_list abuse

tty code abuses fu_list, which causes a bug in remount,ro handling.

If a tty device node is opened on a filesystem, then the last link to the inode
removed, the filesystem will be allowed to be remounted readonly. This is
because fs_may_remount_ro does not find the 0 link tty inode on the file sb
list (because the tty code incorrectly removed it to use for its own purpose).
This can result in a filesystem with errors after it is marked "clean".

Taking idea from Christoph's initial patch, allocate a tty private struct
at file->private_data and put our required list fields in there, linking
file and tty. This makes tty nodes behave the same way as other device nodes
and avoid meddling with the vfs, and avoids this bug.

The error handling is not trivial in the tty code, so for this bugfix, I take
the simple approach of using __GFP_NOFAIL and don't worry about memory errors.
This is not a problem because our allocator doesn't fail small allocs as a rule
anyway. So proper error handling is left as an exercise for tty hackers.

[ Arguably filesystem's device inode would ideally be divorced from the
driver's pseudo inode when it is opened, but in practice it's not clear whether
that will ever be worth implementing. ]

Cc: linux-kernel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

fs: cleanup files_lock locking

Lock tty_files with a new spinlock, tty_files_lock; provide helpers to
manipulate the per-sb files list; unexport the files_lock spinlock.

Cc: linux-kernel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Fix build error caused by a stale security/selinux/av_permissions.h in the $(src)
directory which will override a more recent version in $(obj) that is it
appears to strike only when building with a separate object directory.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Current selinux policy can have over 3000 types.  The type_attr_map in
policy is an array sized by the number of types times sizeof(struct ebitmap)
(12 on x86_64).  Basic math tells us the array is going to be of length
3000 x 12 = 36,000 bytes.  The largest 'safe' allocation on a long running
system is 16k.  Most of the time a 32k allocation will work.  But on long
running systems a 64k allocation (what we need) can fail quite regularly.
In order to deal with this I am converting the type_attr_map to use
flex_arrays.  Let the library code deal with breaking this into PAGE_SIZE
pieces.

-v2
rework some of the if(!obj) BUG() to be BUG_ON(!obj)
drop flex_array_put() calls and just use a _get() object directly

-v3
make apply to James' tree (drop the policydb_write changes)
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

execmod "could" show up on non regular files and non chr files.  The current
implementation would actually make these checks against non-existant bits
since the code assumes the execmod permission is same for all file types.
To make this line up for chr files we had to define execute_no_trans and
entrypoint permissions.  These permissions are unreachable and only existed
to to make FILE__EXECMOD and CHR_FILE__EXECMOD the same.  This patch drops
those needless perms as well.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

kernel can dynamically remap perms.  Drop the open lookup table and put open
in the common file perms.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

Currently there are a number of applications (nautilus being the main one) which
calls access() on files in order to determine how they should be displayed.  It
is normal and expected that nautilus will want to see if files are executable
or if they are really read/write-able.  access() should return the real
permission.  SELinux policy checks are done in access() and can result in lots
of AVC denials as policy denies RWX on files which DAC allows.  Currently
SELinux must dontaudit actual attempts to read/write/execute a file in
order to silence these messages (and not flood the logs.)  But dontaudit rules
like that can hide real attacks.  This patch addes a new common file
permission audit_access.  This permission is special in that it is meaningless
and should never show up in an allow rule.  Instead the only place this
permission has meaning is in a dontaudit rule like so:

dontaudit nautilus_t sbin_t:file audit_access

With such a rule if nautilus just checks access() we will still get denied and
thus userspace will still get the correct answer but we will not log the denial.
If nautilus attempted to actually perform one of the forbidden actions
(rather than just querying access(2) about it) we would still log a denial.
This type of dontaudit rule should be used sparingly, as it could be a
method for an attacker to probe the system permissions without detection.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

SELinux needs to pass the MAY_ACCESS flag so it can handle auditting
correctly.  Presently the masking of MAY_* flags is done in the VFS.  In
order to allow LSMs to decide what flags they care about and what flags
they don't just pass them all and the each LSM mask off what they don't
need.  This patch should contain no functional changes to either the VFS or
any LSM.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

Move the reading of ocontext type data out of policydb_read() in a separate
function ocontext_read()
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

move genfs read functionality out of policydb_read() and into a new
function called genfs_read()
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

hashtab_create() only returns NULL on allocation failures to -ENOMEM is
appropriate here.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

The original code always returned -1 (-EPERM) on error.  The new code
returns either -ENOMEM, or -EINVAL or it propagates the error codes from
lower level functions next_entry() or hashtab_insert().

next_entry() returns -EINVAL.
hashtab_insert() returns -EINVAL, -EEXIST, or -ENOMEM.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

It's better to propagate the error code from avtab_init() instead of
returning -1 (-EPERM).  It turns out that avtab_init() never fails so
this patch doesn't change how the code runs but it's still a clean up.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

Originally cond_read_node() returned -1 (-EPERM) on errors which was
incorrect.  Now it either propagates the error codes from lower level
functions next_entry() or cond_read_av_list() or it returns -ENOMEM or
-EINVAL.

next_entry() returns -EINVAL.
cond_read_av_list() returns -EINVAL or -ENOMEM.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>