- 25 8月, 2005 3 次提交
-
-
由 Keith Owens 提交于
pcibios_bus_to_resource is exported on all architectures except ia64 and sparc. Add exports for the two missing architectures. Needed when Yenta socket support is compiled as a module. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
I mistakedly disabled fusion support in an earlier update. Fusion is commonly used on many x86-64 systems, so this was a problem. This patch fixes that. Signed-off-by: NAnd Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
This patch puts back the export of machine_power_off() that was removed by some janitor as it's used for emergency shutdown by the G5 thermal control driver. Wether that driver should use kernel_power_off() instead is debatable and a post-2.6.13 decision. In the meantime, please commit that patch that fixes the driver for now. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 8月, 2005 18 次提交
-
-
由 Andi Kleen 提交于
The code to detect IO links on Opteron would not check if the node had actually memory. This could lead to pci_bus_to_node returning an invalid node, which might cause crashes later when dma_alloc_coherent passes it to page_alloc_node(). The bug has been there forever but for some reason it is causing now crashes. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
i386 floating-point exception handling has a bug that can cause error code 0 to be sent instead of the proper code during signal delivery. This is caused by unconditionally checking the IS and c1 bits from the FPU status word when they are not always relevant. The IS bit tells whether an exception is a stack fault and is only relevant when the exception is IE (invalid operation.) The C1 bit determines whether a stack fault is overflow or underflow and is only relevant when IS and IE are set. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
missing exports on m32r Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
a bunch of functions switched from volatile to __attribute__((noreturn)) and from const to __attribute_pure__ Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
use of explicit labels in inline asm is a Bad Idea(tm), since gcc can decide to inline the function in several places. Fixed by use of 1f/f: instead of .Lfitsin/.Lfitsin: Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
either icu_data declaration for SMP case should be taken out of m32102.h, or its declarations for m32700ut and opsput should not be static for SMP. Patch does the latter - judging by comments in m32102.h it is intended to be non-static. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
extern on physid_2_cpu[] does not belong in smp.h - the thing is static. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
"=m" (lock->lock) / "1" (lock->lock) makes gcc4 unhappy; fixed by s/1/m/, same as in case of i386 rwsem.h where such variant had been accepted by both Linus and rth. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
on UP smp_call_function() is expanded to expression. Alpha oprofile calls that puppy and ignores the return value. And has -Werror for arch/*... Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
CONFIG_PM is broken on 44x; removed duplicate entry for CONFIG_PM, made the inclusion of generic one conditional on BROKEN || !44x. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
a bunch of ppc 4xx variants unconditionally calls early_serial_setup() and therefore needs SERIAL_8250 Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
MV64360 does not support IRQ_ALL_CPUS - see arch/ppc/kernel/mv64360_pic.c. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
ppc SMP is supported only for 6xx/POWER3/POWER4 - i.e. ones that have PPC_STD_MMU. Dependency fixed. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
DEBUG_PAGEALLOC is broken on m32r - the option had been blindly copied from i386; kernel_map_pages() had not and that's what is needed for DEBUG_PAGEALLOC to work (or link, while we are at it). Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
PCI support is broken on m32r (pci_map_... missing, etc.); marked as such Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
NUMA is broken on m32r; marked as such Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
SMP is broken on arm; marked as such Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
NUMA is broken on alpha; marked as such Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 8月, 2005 2 次提交
-
-
由 Peter Chubb 提交于
Thanks to Stephane, we've now worked out the real cause of the `Linux will not boot on simulator' problem. Turns out it's a stack overflow because the stack pointer wasn't being initialised properly in boot_head.S (it was being initialised to the lowest instead of the highest address of the stack, so the first push started to overwrite data in the BSS). Signed-off-by: NPeter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Tony Luck 提交于
Earlier fix in 4aec0fb1 just masked the real problem. Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 20 8月, 2005 5 次提交
-
-
由 Andi Kleen 提交于
Plug a race in TSC synchronization We need to do tsc_sync_wait() before the CPU is set online to prevent multiple CPUs from doing it in parallel - which won't work because TSC sync has global unprotected state. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Don't printk exceptions for ltrace Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Steven Rostedt 提交于
I'm trying to get the nmi working with my laptop (IBM ThinkPad G41) and after debugging it a while, I found that the nmi code doesn't want to set it up for this particular CPU. Here I have: $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Mobile Intel(R) Pentium(R) 4 CPU 3.33GHz stepping : 1 cpu MHz : 3320.084 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 3 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pni monitor ds_cpl est tm2 cid xtpr bogomips : 6642.39 processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Mobile Intel(R) Pentium(R) 4 CPU 3.33GHz stepping : 1 cpu MHz : 3320.084 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 3 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pni monitor ds_cpl est tm2 cid xtpr bogomips : 6637.46 And the following code shows: $ cat linux-2.6.13-rc6/arch/i386/kernel/nmi.c [...] void setup_apic_nmi_watchdog (void) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15) return; setup_k7_watchdog(); break; case X86_VENDOR_INTEL: switch (boot_cpu_data.x86) { case 6: if (boot_cpu_data.x86_model > 0xd) return; setup_p6_watchdog(); break; case 15: if (boot_cpu_data.x86_model > 0x3) return; Here I get boot_cpu_data.x86_model == 0x4. So I decided to change it and reboot. I now seem to have a working NMI. So, unless there's something know to be bad about this processor and the NMI. I'm submitting the following patch. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NZwane Mwaikambo <zwane@arm.linux.org.uk> Acked-by: NMikael Pettersson <mikpe@csd.uu.se> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
sparc_ksyms.c used to declare weak alias to several gcc intrinsics. It doesn't work with gcc4 anymore - it wants a declaration for the thing we are aliasing to and that's not going to happen for something like .mul, etc. Replaced with direct injection of weak alias on the assembler level - .weak <alias> followed by <alias> = <aliased>; that works on all gcc versions. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
GCC 4.x really dislikes the games we are playing in unaligned.c, and the cleanest way to fix this is to move things into assembler. Noted by Al Viro. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 8月, 2005 8 次提交
-
-
由 David S. Miller 提交于
1) cpufreq wants frequenceis in KHZ not MHZ 2) provide ->get() method so curfreq node is created Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Wienand 提交于
After building a fresh tree with gcc 4 I can't boot the simulator as the bootloader loader dies with loading /home/ianw/kerntest/kerncomp//build/sim_defconfig/vmlinux... failed to read phdr After some investigation I believe this is do with differences between the alignment of variables on the stack between gcc 3 and 4 and the ski simulator. If you trace through with the simulator you can see that the disk_stat structure value returned from the SSC_WAIT_COMPLETION call seems to be only half loaded. I guess it doesn't like the alignment of the input. Signed-off-by: NIan Wienand <ianw@gelato.unsw.edu.au> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Andi Kleen 提交于
Since early CPU identify is in this information is already available Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matt Porter 提交于
Fixes build on 4xx stb03xxx when general purpose dma engine support is enabled. Signed-off-by: NMatt Porter <mporter@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Running UML inside a detached screen delivers SIGWINCH when UML is not expecting it. This patch ignores them. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
asm/elf.h breaks the x86_64 build. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Robert Love 提交于
Add inotify and ioprio syscall stubs to SH64. Signed-off-by: NRobert Love <rml@novell.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Robert Love 提交于
Add inotify and ioprio syscall stubs to SH. Signed-off-by: NRobert Love <rml@novell.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 18 8月, 2005 2 次提交
-
-
由 Brian King 提交于
This fixes a bug in the PPC64 iommu vmerge code which results in the potential for iommu_unmap_sg to go off unmapping more than it should. This was found on a test system which resulted in PCI bus errors due to PCI memory being unmapped while DMAs were still in progress. Signed-off-by: NBrian King <brking@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tony Luck 提交于
Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 17 8月, 2005 2 次提交
-
-
由 Dimitry Andric 提交于
Patch from Dimitry Andric This patch removes the initial UART I/O mapping from s3c2410_iodesc, since the same mapping is already done in the function s3c24xx_init_io in the file arch/arm/mach-s3c2410/cpu.c, through the s3c_iodesc array. I'm not sure if duplicate mappings do any harm, but it's simply redundant. Also, in s3c2440.c the UART I/O mapping is NOT done. Additionally, I put a comma behind the last mapping, to ease copy/pasting stuff around, and make the style consistent with s3c2440.c and other files. Signed-off-by: NDimitry Andric <dimitry@andric.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Sean Lee 提交于
Patch from Sean Lee In the arch/arm/mm/Kconfig file, the CPU_DCACHE_WRITETHROUGH option is depend on the CPU_DISABLE_DCACHE, but the "Disable D-Cache" option is configured as CPU_DCACHE_DISABLE. The CPU_DISABLE_DCACHE should be CPU_DCACHE_DISABLE Signed-off-by: NSean Lee <beginner2arm@eyou.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-