Analog to git commit 0c8c0f03
"x86/fpu, sched: Dynamically allocate 'struct fpu'"
move the struct fpu to the end of the struct thread_struct,
set CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and add the
setup_task_size() function to calculate the correct size
fo the task struct.

For the performance_defconfig this increases the size of
struct task_struct from 7424 bytes to 7936 bytes (MACHINE_HAS_VX==1)
or 7552 bytes (MACHINE_HAS_VX==0). The dynamic allocation of the
struct fpu is removed. The slab cache uses an 8KB block for the
task struct in all cases, there is enough room for the struct fpu.
For MACHINE_HAS_VX==1 each task now needs 512 bytes less memory.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We have four different stack tracers of which three had bugs. So it's
time to merge them to a single stack tracer which allows to specify a
call back function which will be called for each step.

This patch changes behavior a bit:

- the "nosched" and "in_sched_functions" check within
  save_stack_trace_tsk did work only for the last stack frame within a
  context. Now it considers the check for each stack frame like it
  should.

- both the oprofile variant and the perf_events variant did save a
  return address twice if a zero back chain was detected, which
  indicates an interrupt frame. The new dump_trace function will call
  the oprofile and perf_events backends with the psw address that is
  contained within the corresponding pt_regs structure instead.

- the original show_trace and save_context_stack functions did already
  use the psw address of the pt_regs structure if a zero back chain
  was detected. However now we ignore the psw address if it is a user
  space address. After all we trace the kernel stack and not the user
  space stack. This way we also get rid of the garbage user space
  address in case of warnings and / or panic call traces.

So this should make life easier since now there is only one stack
tracer left which we can break.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Implement current_stack_pointer() helper function and use it
everywhere, instead of having several different inline assembly
variants.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This is a leftover from the 31 bit area. For CONFIG_64BIT the usual
operation "y = x | PSW_ADDR_AMODE" is a nop. Therefore remove all
usages of PSW_ADDR_AMODE and make the code a bit less confusing.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>

Finally get rid of the leading underscore. I tried this already two or
three years ago, however Michael Holzheu objected since this would
break the crash utility (again).

However Michael integrated support for the new name into the crash
utility back then, so it doesn't break if the name will be changed
now.  So finally get rid of the ever confusing leading underscore.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

It does not make sense to try to relinquish the time slice with diag 0x9c
to a CPU in a state that does not allow to schedule the CPU. The scenario
where this can happen is a CPU waiting in udelay/mdelay while holding a
spin-lock.

Add a CIF bit to tag a CPU in enabled wait and use it to detect that the
yield of a CPU will not be successful and skip the diagnose call.
Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The external interrupts for runtime instrumentation buffer-full
and runtime instrumentation halted are unused and have no current
user. Remove the support and ignore the second parameter of the
s390_runtime_instr system call from now on.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The current disabled wait code stores register contents into their
save areas, however it is (at least) missing the new vector registers.

Given the fact that the whole exercise seems to be rather pointless
simply don't save any registers anymore.

In a "live" system it is always possible to inspect register contents,
and in case of a dump the register contents will be stored by the
dump mechanism.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

With the removal of 31 bit code we can always assume that the epsw
instruction is available. Therefore use the __extract_psw() function
to disable and enable machine checks.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Split the API and FPU type definitions into separate header files
similar to "x86/fpu: Rename fpu-internal.h to fpu/internal.h" (78f7f1e5).

The new header files and their meaning are:

asm/fpu/types.h:
	FPU related data types, needed for 'struct thread_struct' and
	'struct task_struct'.

asm/fpu/api.h:
	FPU related 'public' functions for other subsystems and device
	drivers.

asm/fpu/internal.h:
	FPU internal functions mainly used to convert
	FPU register contents in signal handling.
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The defines that are used in entry.S have been partially converted to
use the _BITUL macro (setup.h). This patch converts the rest.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The cpu flags and pt_regs flags fields are each 64 bits in size. A flag can
be set with helper functions like set_cpu_flags().

These functions create a mask using "1U << flag". This doesn't work if flag
is larger than 31, since 1U << 32 == 0.

So fix this in case we ever will have such flag numbers.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

When using systemtap it was observed that our udelay implementation is
rather suboptimal if being called from a kprobe handler installed by
systemtap.

The problem observed when a kprobe was installed on lock_acquired().
When the probe was hit the kprobe handler did call udelay, which set
up an (internal) timer and reenabled interrupts (only the clock comparator
interrupt) and waited for the interrupt.
This is an optimization to avoid that the cpu is busy looping while waiting
that enough time passes. The problem is that the interrupt handler still
does call irq_enter()/irq_exit() which then again can lead to a deadlock,
since some accounting functions may take locks as well.

If one of these locks is the same, which caused lock_acquired() to be
called, we have a nice deadlock.

This patch reworks the udelay code for the interrupts disabled case to
immediately leave the low level interrupt handler when the clock
comparator interrupt happens. That way no C code is being called and the
deadlock cannot happen anymore.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Previously, the init task did not have an allocated FPU save area and
saving an FPU state was not possible.  Now if the vector extension is
always enabled, provide a static FPU save area to save FPU states of
vector instructions that can be executed quite early.
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The 31-bit assembler code for the early sclp console is error
prone as git commit fde24b54d976cc123506695c17db01438a11b673
"s390/sclp: clear upper register halves in _sclp_print_early"
has shown.

Convert the assembler code to C.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Improve the save and restore behavior of FPU register contents to use the
vector extension within the kernel.

The kernel does not use floating-point or vector registers and, therefore,
saving and restoring the FPU register contents are performed for handling
signals or switching processes only.  To prepare for using vector
instructions and vector registers within the kernel, enhance the save
behavior and implement a lazy restore at return to user space from a
system call or interrupt.

To implement the lazy restore, the save_fpu_regs() sets a CPU information
flag, CIF_FPU, to indicate that the FPU registers must be restored.
Saving and setting CIF_FPU is performed in an atomic fashion to be
interrupt-safe.  When the kernel wants to use the vector extension or
wants to change the FPU register state for a task during signal handling,
the save_fpu_regs() must be called first.  The CIF_FPU flag is also set at
process switch.  At return to user space, the FPU state is restored.  In
particular, the FPU state includes the floating-point or vector register
contents, as well as, vector-enablement and floating-point control.  The
FPU state restore and clearing CIF_FPU is also performed in an atomic
fashion.

For KVM, the restore of the FPU register state is performed when restoring
the general-purpose guest registers before the SIE instructions is started.
Because the path towards the SIE instruction is interruptible, the CIF_FPU
flag must be checked again right before going into SIE.  If set, the guest
registers must be reloaded again by re-entering the outer SIE loop.  This
is the same behavior as if the SIE critical section is interrupted.
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Introduce a new structure to manage FP and VX registers. Refactor the
save and restore of floating point and vector registers with a set
of helper functions in fpu-internal.h.
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Move the EX_TABLE macro definitions from the processor.h to the linkage.h
header file.  It helps to reduce circular header file dependencies.
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Remove the 31 bit support in order to reduce maintenance cost and
effectively remove dead code. Since a couple of years there is no
distribution left that comes with a 31 bit kernel.

The 31 bit kernel also has been broken since more than a year before
anybody noticed. In addition I added a removal warning to the kernel
shown at ipl for 5 minutes: a960062e ("s390: add 31 bit warning
message") which let everybody know about the plan to remove 31 bit
code. We didn't get any response.

Given that the last 31 bit only machine was introduced in 1999 let's
remove the code.
Anybody with 31 bit user space code can still use the compat mode.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Christian Borntraeger reported that the now missing diag 44 calls (voluntary
time slice end) does cause a performance regression for stop_machine() calls
if a machine has more virtual cpus than the host has physical cpus.

This patch mainly reverts 57f2ffe1 ("s390: remove diag 44 calls from
cpu_relax()") with the exception that we still do not issue diag 44 calls if
running with smt enabled. Due to group scheduling algorithms when running in
LPAR this would lead to significant latencies.
However, when running in LPAR we do not have more virtual than physical cpus.
Reported-and-tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Simplify cpu_relax() to a simple barrier(). Performance wise this doesn't
seem to make any big difference anymore, since nearly all lock variants
have directed yield semantics in the meantime.
Also this makes s390 behave like all other architectures.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The vector extension introduces 32 128-bit vector registers and a set of
instruction to operate on the vector registers.

The kernel can control the use of vector registers for the problem state
program with a bit in control register 0. Once enabled for a process the
kernel needs to retain the content of the vector registers on context
switch. The signal frame is extended to include the vector registers.
Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added
to the regset interface for the debugger and core dumps.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Move the C functions and definitions related to the idle state handling
to arch/s390/include/asm/idle.h and arch/s390/kernel/idle.c. The function
s390_get_idle_time is renamed to arch_cpu_idle_time and vtime_stop_cpu to
enabled_wait.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Move the nohz_delay bit from the s390_idle data structure to the
per-cpu flags. Clear the nohz delay flag in __cpu_disable and
remove the cpu hotplug notifier that used to do this.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The arch_mutex_cpu_relax() function, introduced by 34b133f8, is
hacky and ugly. It was added a few years ago to address the fact
that common cpu_relax() calls include yielding on s390, and thus
impact the optimistic spinning functionality of mutexes. Nowadays
we use this function well beyond mutexes: rwsem, qrwlock, mcs and
lockref. Since the macro that defines the call is in the mutex header,
any users must include mutex.h and the naming is misleading as well.

This patch (i) renames the call to cpu_relax_lowlatency  ("relax, but
only if you can do it with very low latency") and (ii) defines it in
each arch's asm/processor.h local header, just like for regular cpu_relax
functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax,
and thus we can take it out of mutex.h. While this can seem redundant,
I believe it is a good choice as it allows us to move out arch specific
logic from generic locking primitives and enables future(?) archs to
transparently define it, similarly to System Z.
Signed-off-by: NDavidlohr Bueso <davidlohr@hp.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharat Bhushan <r65777@freescale.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Stratos Karafotis <stratosk@semaphore.gr>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: adi-buildroot-devel@lists.sourceforge.net
Cc: linux390@de.ibm.com
Cc: linux-alpha@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-cris-kernel@axis.com
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux@lists.openrisc.net
Cc: linux-m32r-ja@ml.linux-m32r.org
Cc: linux-m32r@ml.linux-m32r.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-metag@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

The oi and ni instructions used in entry[64].S to set and clear bits
in the thread-flags are not guaranteed to be atomic in regard to other
CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific
bits. Updates on the TIF bits are done with atomic instructions,
updates on CPU and pt_regs bits are done with non-atomic instructions.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

In the case of a fault, we will retry to exit sie64 but with gmap fault
indication for this thread set. This makes it possible to handle async
page faults.

Based on a patch from Martin Schwidefsky.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The IDTE instruction used to flush TLB entries for a specific address
space uses the address-space-control element (ASCE) to identify
affected TLB entries. The upgrade of a page table adds a new top
level page table which changes the ASCE. The TLB entries associated
with the old ASCE need to be flushed and the ASCE for the address space
needs to be replaced synchronously on all CPUs which currently use it.
The concept of a lazy ASCE update with an exception handler is broken.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Fix the following bugs:
- When returning from a signal the signal handler copies the saved psw mask
  from user space and uses parts of it. Especially it restores the RI bit
  unconditionally. If however the machine doesn't support RI, or RI is
  disabled for the task, the last lpswe instruction which returns to user
  space will generate a specification exception.
  To fix this check if the RI bit is allowed to be set and kill the task
  if not.
- In the compat mode signal handler code the RI bit of the psw mask gets
  propagated to the mask of the return psw: if user space enables RI in the
  signal handler, RI will also be enabled after the signal handler is
  finished.
  This is a different behaviour than with 64 bit tasks. So change this to
  match the 64 bit semantics, which restores the original RI bit value.
- Fix similar oddities within the ptrace code as well.
Reviewed-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Simplify the uaccess code by removing the user_mode=home option.
The kernel will now always run in the home space mode.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Now that the in-kernel disassembler has an own header file move the
disassembler related function prototypes to that header file.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Linus suggested to replace

 #ifndef CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX
 #define arch_mutex_cpu_relax() cpu_relax()
 #endif

with just a simple

  #ifndef arch_mutex_cpu_relax
  # define arch_mutex_cpu_relax() cpu_relax()
  #endif

to get rid of CONFIG_HAVE_CPU_RELAX_SIMPLE. So architectures can
simply define arch_mutex_cpu_relax if they want an architecture
specific function instead of having to add a select statement in
their Kconfig in addition.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

The gmap_map_segment function uses PGDIR_SIZE in the check for the
maximum address in the tasks address space. This incorrectly limits
the amount of memory usable for a kvm guest to 4TB. The correct limit
is (1UL << 53). As the TASK_SIZE has different values (4TB vs 8PB)
dependent on the existance of the fourth page table level, create
a new define 'TASK_MAX_SIZE' for (1UL << 53).
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The patch implements a s390 specific ptrace request
PTRACE_TE_ABORT_RAND to modify the randomness of spontaneous
aborts of memory transactions of the transaction execution
facility. The data argument of the ptrace request is used to
specify the levels of randomness, 0 for normal operation, 1 to
abort every transaction at a random instruction, and 2 to abort
a random transaction at a random instruction. The default is 0
for normal operation.
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Pass buffer length in extra parameter.
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This is the s390 port of 70627654 "x86, extable: Switch to relative
exception table entries".
Reduces the size of our exception tables by 50% on 64 bit builds.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add a line for each cpu cache to /proc/cpuinfo.
Since we only have information of private cpu caches in sysfs we
add a line for each cpu cache in /proc/cpuinfo which will also
contain information about shared caches.

For a z196 machine /proc/cpuinfo now looks like:

vendor_id       : IBM/S390
bogomips per cpu: 14367.00
features        : esan3 zarch stfle msa ldisp eimm dfp etf3eh highgprs
cache0          : level=1 type=Data scope=Private size=64K line_size=256 associativity=4
cache1          : level=1 type=Instruction scope=Private size=128K line_size=256 associativity=8
cache2          : level=2 type=Unified scope=Private size=1536K line_size=256 associativity=12
cache3          : level=3 type=Unified scope=Shared size=24576K line_size=256 associativity=12
cache4          : level=4 type=Unified scope=Shared size=196608K line_size=256 associativity=24
processor 0: version = FF,  identification = 000123,  machine = 2817
processor 1: version = FF,  identification = 100123,  machine = 2817
processor 2: version = FF,  identification = 200123,  machine = 2817
processor 3: version = FF,  identification = 200123,  machine = 2817
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Allow user-space processes to use transactional execution (TX).
If the TX facility is available user space programs can use
transactions for fine-grained serialization based on the data
objects that are referenced during a transaction. This is
useful for lockless data structures and speculative compiler
optimizations.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>