We currently have an explicit "needs_post" vtable method which
returns a stack variable for whether we should later run
post-schedule.  This leads to an awkward exchange of the
variable as it bubbles back up out of the context switch. Peter
Zijlstra observed that this information could be stored in the
run-queue itself instead of handled on the stack.

Therefore, we revert to the method of having context_switch
return void, and update an internal rq->post_schedule variable
when we require further processing.

In addition, we fix a race condition where we try to access
current->sched_class without holding the rq->lock.  This is
technically racy, as the sched-class could change out from
under us.  Instead, we reference the per-rq post_schedule
variable with the runqueue unlocked, but with preemption
disabled to see if we need to reacquire the rq->lock.

Finally, we clean the code up slightly by removing the #ifdef
CONFIG_SMP conditionals from the schedule() call, and implement
some inline helper functions instead.

This patch passes checkpatch, and rt-migrate.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090729150422.17691.55590.stgit@dev.haskins.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The might_sleep() test inside cond_resched_lock() assumes the
spinlock is held and then preemption is disabled. This is true
with CONFIG_PREEMPT but the preempt_count() doesn't change
otherwise.

Check by starting from the appropriate preempt offset depending
on the config.
Reported-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1248458723-12146-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

To fix the common case where ->enable() does not set up
mult, make sure mult_orig is saved in mult on disable.

Also add comments to explain why we do this.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Cc: johnstul@us.ibm.com
Cc: lethal@linux-sh.org
Cc: akpm@linux-foundation.org
LKML-Reference: <20090618152432.10136.9932.sendpatchset@rx1.opensource.se>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

the code allready uses flush_kernel_dcache_page(). This patch updates the
driver to the recent sg API changes which require that either SG_MITER_TO_SG
or SG_MITER_FROM_SG is set. SG_MITER_TO_SG calls flush_kernel_dcache_page()
in sg_mitter_stop()
Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

sg_miter_start() is currently unaware of the direction of the copy
process (to or from the scatter list). It is important to know the
direction because the page has to be flushed in case the data written
is seen on a different mapping in user land on cache incoherent
architectures.
Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

Commit d9c7d394
("block: prevent possible io_context->refcount overflow") mistakenly
changed atomic_inc(&ioc->nr_tasks) to atomic_long_inc(&ioc->refcount).
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NNikanth Karthikesan <knikanth@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

I've been doing this for years, and akpm picked me up on it about 12
months ago.  lguest partly serves as example code, so let's do it Right.

Also, remove two unused fields in struct vblk_info in the example launcher.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>

I don't really notice it (except to begrudge the extra vertical
space), but Ingo does.  And he pointed out that one excuse of lguest
is as a teaching tool, it should set a good example.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>

To avoid userspace build failures such as:

.../linux/uio.h:37: error: expected `=', `,', `;', `asm' or `__attribute__' before `iov_length'
.../linux/uio.h:47: error: expected declaration specifiers or `...' before `size_t'

move uio functions inside a __KERNEL__ block.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Once a structure goes over PAGE_SIZE*2, we see occasional allocation
failures.  Some people have chosen to switch over to things like vmalloc()
that will let them keep array-like access to such a large structures.
But, vmalloc() has plenty of downsides.

Here's an alternative.  I think it's what Andrew was suggesting here:

	http://lkml.org/lkml/2009/7/2/518

I call it a flexible array.  It does all of its work in PAGE_SIZE bits, so
never does an order>0 allocation.  The base level has
PAGE_SIZE-2*sizeof(int) bytes of storage for pointers to the second level.
 So, with a 32-bit arch, you get about 4MB (4183112 bytes) of total
storage when the objects pack nicely into a page.  It is half that on
64-bit because the pointers are twice the size.  There's a table detailing
this in the code.

There are kerneldocs for the functions, but here's an
overview:

flex_array_alloc() - dynamically allocate a base structure
flex_array_free() - free the array and all of the
		    second-level pages
flex_array_free_parts() - free the second-level pages, but
			  not the base (for static bases)
flex_array_put() - copy into the array at the given index
flex_array_get() - copy out of the array at the given index
flex_array_prealloc() - preallocate the second-level pages
			between the given indexes to
			guarantee no allocs will occur at
			put() time.

We could also potentially just pass the "element_size" into each of the
API functions instead of storing it internally.  That would get us one
more base pointer on 32-bit.

I've been testing this by running it in userspace.  The header and patch
that I've been using are here, as well as the little script I'm using to
generate the size table which goes in the kerneldocs.

	http://sr71.net/~dave/linux/flexarray/

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Found with make headers_check

/usr/include/linux/pps.h:52: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: NDave Jones <davej@redhat.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After commit ec64f515 ("cgroup: fix
frequent -EBUSY at rmdir"), cgroup's rmdir (especially against memcg)
doesn't return -EBUSY by temporary ref counts.  That commit expects all
refs after pre_destroy() is temporary but...it wasn't.  Then, rmdir can
wait permanently.  This patch tries to fix that and change followings.

 - set CGRP_WAIT_ON_RMDIR flag before pre_destroy().
 - clear CGRP_WAIT_ON_RMDIR flag when the subsys finds racy case.
   if there are sleeping ones, wakes them up.
 - rmdir() sleeps only when CGRP_WAIT_ON_RMDIR flag is set.
Tested-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reported-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: NPaul Menage <menage@google.com>
Acked-by: NBalbir Sigh <balbir@linux.vnet.ibm.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The bug was introduced by commit cc31edce
("cgroups: convert tasks file to use a seq_file with shared pid array").

We cache a pid array for all threads that are opening the same "tasks"
file, but the pids in the array are always from the namespace of the
last process that opened the file, so all other threads will read pids
from that namespace instead of their own namespaces.

To fix it, we maintain a list of pid arrays, which is keyed by pid_ns.
The list will be of length 1 at most time.
Reported-by: NPaul Menage <menage@google.com>
Idea-by: NPaul Menage <menage@google.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Reviewed-by: NSerge Hallyn <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We really don't want to mark the pty as a low-latency device, because as
Alan points out, the ->write method can be called from an IRQ (ppp?),
and that means we can't use ->low_latency=1 as we take mutexes in the
low_latency case.

So rather than using low_latency to force the written data to be pushed
to the ldisc handling at 'write()' time, just make the reader side (or
the poll function) do the flush when it checks whether there is data to
be had.

This also fixes the problem with lost data in an emacs compile buffer
(bugzilla 13815), and we can thus revert the low_latency pty hack
(commit 3a542974: "pty: quickfix for the
pty ENXIO timing problems").
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Tested-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ Modified to do the tty_flush_to_ldisc() inside input_available_p() so
  that it triggers for both read and poll()  - Linus]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Create bdgrab().  This function copies an existing reference to a
block_device.  It is safe to call from any context.

Hibernation code wishes to copy a reference to the active swap device.
Right now it calls bdget() under a spinlock, but this is wrong because
bdget() can sleep.  It doesn't need a full bdget() because we already
hold a reference to active swap devices (and the spinlock protects
against swapoff).

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13827Signed-off-by: NAlan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This adds new set/get tiling interfaces where the pitch
and macro/micro tiling enables can be set. Along with
a flag to decide if this object should have a surface when mapped.

The only thing we need to allocate with a mapped surface should be
the frontbuffer. Note rotate scanout shouldn't require one, and
back/depth shouldn't either, though mesa needs some fixes.

It fixes the TTM interfaces along Thomas's suggestions, and I've tested
the surface stealing code with two X servers and not seen any lockdep issues.

I've stopped tiling the fbcon frontbuffer, as I don't see there being
any advantage other than testing, I've left the testing commands in there,
just flip the fb_tiled to true in radeon_fb.c

Open: Can we integrate endian swapping in with this?

Future features:
texture tiling - need to relocate texture registers TXOFFSET* with tiling info.

This also merges Michel's cleanup surfaces regs at init time patch
even though it makes sense on its own, this patch really relies on it.

Some PowerMac firmwares set up a tiling surface at the beginning of VRAM
which messes us up otherwise.
that patch is:
Signed-off-by: NMichel Dänzer <daenzer@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On certain configurations, HPA isn't or can't be unlocked during
probing but it somehow ends up unlocked afterwards.  In the following
thread, the problem can be reliably reproduced after resuming from
STR.  The BIOS turns on HPA during boot but forgets to do it during
resume.

  http://thread.gmane.org/gmane.linux.kernel/858310

This patch updates libata revalidation such that it considers native
n_sectors.  If the device size has increased to match native
n_sectors, it's assumed that HPA has been unlocked involuntarily and
the device is recognized as the same one.  This should be fairly safe
while nicely working around the problem.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NChristof Warlich <christof@warlich.name>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

mm: Pass virtual address to [__]p{te,ud,md}_free_tlb()

Upcoming paches to support the new 64-bit "BookE" powerpc architecture
will need to have the virtual address corresponding to PTE page when
freeing it, due to the way the HW table walker works.

Basically, the TLB can be loaded with "large" pages that cover the whole
virtual space (well, sort-of, half of it actually) represented by a PTE
page, and which contain an "indirect" bit indicating that this TLB entry
RPN points to an array of PTEs from which the TLB can then create direct
entries. Thus, in order to invalidate those when PTE pages are deleted,
we need the virtual address to pass to tlbilx or tlbivax instructions.

The old trick of sticking it somewhere in the PTE page struct page sucks
too much, the address is almost readily available in all call sites and
almost everybody implemets these as macros, so we may as well add the
argument everywhere. I added it to the pmd and pud variants for consistency.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Howells <dhowells@redhat.com> [MN10300 & FRV]
Acked-by: NNick Piggin <npiggin@suse.de>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The use of a static buffer in rose2asc() to return its result is not
threadproof and can result in corruption if multiple threads are trying
to use one of the procfs files based on rose2asc().
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBrian Johnson <brijohn@gmail.com>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Incorrect device area lengths are being passed to device_area_is_valid().

The regression appeared in 2.6.31-rc1 through commit
754c5fc7.

With the dm-stripe target, the size of the target (ti->len) was used
instead of the stripe_width (ti->len/#stripes).  An example of a
consequent incorrect error message is:

  device-mapper: table: 254:0: sdb too small for target
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Fixed-link support is broken for the ucc_eth, gianfar, and fs_enet
device drivers.  The "OF MDIO rework" patches removed most of the
support. Instead of re-adding fixed-link stuff to the drivers, this
patch adds a support function for parsing the fixed-link property
and obtaining a dummy phy to match.

Note: the dummy phy handling in arch/powerpc is a bit of a hack and
needs to be reworked.  This function is being added now to solve the
regression in the Ethernet drivers, but it should be considered a
temporary measure until the fixed link handling can be reworked.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Anton noted that for inherited counters the counter-id as provided by
PERF_SAMPLE_ID isn't mappable to the id found through PERF_RECORD_ID
because each inherited counter gets its own id.

His suggestion was to always return the parent counter id, since that
is the primary counter id as exposed. However, these inherited
counters have a unique identifier so that events like
PERF_EVENT_PERIOD and PERF_EVENT_THROTTLE can be specific about which
counter gets modified, which is important when trying to normalize the
sample streams.

This patch removes PERF_EVENT_PERIOD in favour of PERF_SAMPLE_PERIOD,
which is more useful anyway, since changing periods became a lot more
common than initially thought -- rendering PERF_EVENT_PERIOD the less
useful solution (also, PERF_SAMPLE_PERIOD reports the more accurate
value, since it reports the value used to trigger the overflow,
whereas PERF_EVENT_PERIOD simply reports the requested period changed,
which might only take effect on the next cycle).

This still leaves us PERF_EVENT_THROTTLE to consider, but since that
_should_ be a rare occurrence, and linking it to a primary id is the
most useful bit to diagnose the problem, we introduce a
PERF_SAMPLE_STREAM_ID, for those few cases where the full
reconstruction is important.

[Does change the ABI a little, but I see no other way out]
Suggested-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1248095846.15751.8781.camel@twins>

commit ca109491 (hrtimer: removing all ur callback modes) moved all
hrtimer callbacks into hard interrupt context when high resolution
timers are active. That breaks code which relied on the assumption
that the callback happens in softirq context.

Provide a generic infrastructure which combines tasklets and hrtimers
together to provide an in-softirq hrtimer experience.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: torvalds@linux-foundation.org
Cc: kaber@trash.net
Cc: David Miller <davem@davemloft.net>
LKML-Reference: <1248265724.27058.1366.camel@twins>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

inotify can have a watchs removed under filesystem reclaim.

=================================
[ INFO: inconsistent lock state ]
2.6.31-rc2 #16
---------------------------------
inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage.
khubd/217 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (iprune_mutex){+.+.?.}, at: [<c10ba899>] invalidate_inodes+0x20/0xe3
{IN-RECLAIM_FS-W} state was registered at:
  [<c10536ab>] __lock_acquire+0x2c9/0xac4
  [<c1053f45>] lock_acquire+0x9f/0xc2
  [<c1308872>] __mutex_lock_common+0x2d/0x323
  [<c1308c00>] mutex_lock_nested+0x2e/0x36
  [<c10ba6ff>] shrink_icache_memory+0x38/0x1b2
  [<c108bfb6>] shrink_slab+0xe2/0x13c
  [<c108c3e1>] kswapd+0x3d1/0x55d
  [<c10449b5>] kthread+0x66/0x6b
  [<c1003fdf>] kernel_thread_helper+0x7/0x10
  [<ffffffff>] 0xffffffff

Two things are needed to fix this.  First we need a method to tell
fsnotify_create_event() to use GFP_NOFS and second we need to stop using
one global IN_IGNORED event and allocate them one at a time.  This solves
current issues with multiple IN_IGNORED on a queue having tail drop
problems and simplifies the allocations since we don't have to worry about
two tasks opperating on the IGNORED event concurrently.
Signed-off-by: NEric Paris <eparis@redhat.com>

Some drivers don't need the return value of rfkill_set_hw_state(),
so it should not be marked as __must_check.
Signed-off-by: NAlan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

irq_set_thread_affinity() calls set_cpus_allowed_ptr() which might
sleep, but irq_set_thread_affinity() is called with desc->lock held
and can be called from hard interrupt context as well. The code has
another bug as it does not hold a ref on the task struct as required
by set_cpus_allowed_ptr().

Just set the IRQTF_AFFINITY bit in action->thread_flags. The next time
the thread runs it migrates itself. Solves all of the above problems
nicely.

Add kerneldoc to irq_set_thread_affinity() while at it.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>

Fix MD5 signature checking so that an IPv4 active open
to an IPv6 socket can succeed.  In particular, use the
correct address family's signature generation function
for the SYN/ACK.
Reported-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NJohn Dykstra <john.dykstra1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fs/locks.c:flock_lock_file() is the only user of
cond_resched_bkl()

This helper doesn't do anything more than cond_resched(). The
latter naming is enough to explain that we are rescheduling if
needed.

The bkl suffix suggests another semantics but it's actually a
synonym of cond_resched().
Reported-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1247725694-6082-7-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

might_sleep() is called late-ish in cond_resched(), after the
need_resched()/preempt enabled/system running tests are
checked.

It's better to check the sleeps while atomic earlier and not
depend on some environment datas that reduce the chances to
detect a problem.

Also define cond_resched_*() helpers as macros, so that the
FILE/LINE reported in the sleeping while atomic warning
displays the real origin and not sched.h

Changes in v2:

 - Call __might_sleep() directly instead of might_sleep() which
   may call cond_resched()

 - Turn cond_resched() into a macro so that the file:line
   couple reported refers to the caller of cond_resched() and
   not __cond_resched() itself.

Changes in v3:

 - Also propagate this __might_sleep() pull up to
   cond_resched_lock() and cond_resched_softirq()
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1247725694-6082-6-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

CONFIG_PREEMPT_BKL doesn't exist anymore. So remove this
config-on case definition of cond_resched().
Reported-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1247725694-6082-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a preempt count base offset to compare against the current
preempt level count. It prepares to pull up the might_sleep
check from cond_resched() to cond_resched_lock() and
cond_resched_bh().

For these two helpers, we need to respectively ensure that once
we'll unlock the given spinlock / reenable local softirqs, we
will reach a sleepable state.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
[ Move and rename preempt_count_equals() ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1247725694-6082-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Cover the off case for __might_sleep(), so that we avoid
#ifdefs in files that make use of it. Especially, this prepares
for the __might_sleep() pull up on cond_resched().
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1247725694-6082-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

commit e3c8ca83 (sched: do not count frozen tasks toward load) broke
the nr_uninterruptible accounting on freeze/thaw. On freeze the task
is excluded from accounting with a check for (task->flags &
PF_FROZEN), but that flag is cleared before the task is thawed. So
while we prevent that the task with state TASK_UNINTERRUPTIBLE
is accounted to nr_uninterruptible on freeze we decrement
nr_uninterruptible on thaw.

Use a separate flag which is handled by the freezing task itself. Set
it before calling the scheduler with TASK_UNINTERRUPTIBLE state and
clear it after we return from frozen state.

Cc: <stable@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The BSS section macros in vmlinux.lds.h currently place the .sbss
input section outside the bounds of [__bss_start, __bss_end].  On all
architectures except for microblaze that handle both .sbss and
__bss_start/__bss_end, this is wrong: the .sbss input section is
within the range [__bss_start, __bss_end].  Relatedly, the example
code at the top of the file actually has __bss_start/__bss_end defined
twice; I believe the right fix here is to define them in the
BSS_SECTION macro but not in the BSS macro.

Another problem with the current macros is that several
architectures have an ALIGN(4) or some other small number just before
__bss_stop in their linker scripts.  The BSS_SECTION macro currently
hardcodes this to 4; while it should really be an argument.  It also
ignores its sbss_align argument; fix that.

mn10300 is the only user at present of any of the macros touched by
this patch.  It looks like mn10300 actually was incorrectly converted
to use the new BSS() macro (the alignment of 4 prior to conversion was
a __bss_stop alignment, but the argument to the BSS macro is a start
alignment).  So fix this as well.

I'd like acks from Sam and David on this one.  Also CCing Paul, since
he has a patch from me which will need to be updated to use
BSS_SECTION(0, PAGE_SIZE, 4) once this gets merged.
Signed-off-by: NTim Abbott <tabbott@ksplice.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Qemu added support for a few extra RX modes that Linux doesn't
currently make use of.  Sync the headers to maintain consistency.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

fix: "make Guest" was complaining about duplicated G:032
Signed-off-by: NMatias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Commit e912b114
(net: sk_prot_alloc() should not blindly overwrite memory)
took care of not zeroing whole new socket at allocation time.

sock_copy() is another spot where we should be very careful.
We should not set refcnt to a non null value, until
we are sure other fields are correctly setup, or
a lockless reader could catch this socket by mistake,
while not fully (re)initialized.

This patch puts sk_node & sk_refcnt to the very beginning
of struct sock to ease sock_copy() & sk_prot_alloc() job.

We add appropriate smp_wmb() before sk_refcnt initializations
to match our RCU requirements (changes to sock keys should
be committed to memory before sk_refcnt setting)
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bootmem is not used for the vt screen buffer anymore as slab is now
available at the time the console is initialized.

Get rid of the now superfluous distinction between slab and bootmem,
it's always slab.

This also fixes a kmalloc leak which Catalin described thusly:

Commit a5f4f52e ("vt: use kzalloc() instead of the bootmem allocator")
replaced the alloc_bootmem() with kzalloc() but didn't set vc_kmalloced to
1 and the memory block is later leaked.  The corresponding kmemleak trace:

unreferenced object 0xdf828000 (size 8192):
  comm "swapper", pid 0, jiffies 4294937296
  backtrace:
    [<c006d473>] __save_stack_trace+0x17/0x1c
    [<c000d869>] log_early+0x55/0x84
    [<c01cfa4b>] kmemleak_alloc+0x33/0x3c
    [<c006c013>] __kmalloc+0xd7/0xe4
    [<c00108c7>] con_init+0xbf/0x1b8
    [<c0010149>] console_init+0x11/0x20
    [<c0008797>] start_kernel+0x137/0x1e4
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi>
Tested-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Get rid of extenddisksize parameter of ext3_get_blocks_handle(). This seems to
be a relict from some old days and setting disksize in this function does not
make much sence. Currently it was set only by ext3_getblk().  Since the
parameter has some effect only if create == 1, it is easy to check that the
three callers which end up calling ext3_getblk() with create == 1 (ext3_append,
ext3_quota_write, ext3_mkdir) do the right thing and set disksize themselves.
Signed-off-by: NJan Kara <jack@suse.cz>