Helpful for debugging GPUVM errors as we can see what
hw block and page generated the fault in the log.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Helpful for debugging GPUVM errors as we can see what
hw block and page generated the fault in the log.

v2: simplify fault decoding
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Helpful for debugging GPUVM errors as we can see what
hw block and page generated the fault in the log.

v2: simplify fault decoding
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Avoid creating temporary platform device that will lead to issue
when several radeon gpu are in same computer. Instead directly use
the radeon device for requesting firmware.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Op 10-07-13 12:03, Markus Trippelsdorf schreef:
> On 2013.07.10 at 11:56 +0200, Maarten Lankhorst wrote:
>> Op 10-07-13 11:46, Markus Trippelsdorf schreef:
>>> On 2013.07.10 at 11:29 +0200, Maarten Lankhorst wrote:
>>>> Op 10-07-13 11:22, Markus Trippelsdorf schreef:
>>>>> By simply copy/pasting a big document under LibreOffice my system hangs
>>>>> itself up. Only a hard reset gets it working again.
>>>>> see also: https://bugs.freedesktop.org/show_bug.cgi?id=66551
>>>>>
>>>>> I've bisected the issue to:
>>>>>
>>>>> commit ecff665f
>>>>> Author: Maarten Lankhorst <m.b.lankhorst@gmail.com>
>>>>> Date:   Thu Jun 27 13:48:17 2013 +0200
>>>>>
>>>>>     drm/ttm: make ttm reservation calls behave like reservation calls
>>>>>
>>>>>     This commit converts the source of the val_seq counter to
>>>>>     the ww_mutex api. The reservation objects are converted later,
>>>>>     because there is still a lockdep splat in nouveau that has to
>>>>>     resolved first.
>>>>>
>>>>>     Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
>>>>>     Reviewed-by: Jerome Glisse <jglisse@redhat.com>
>>>>>     Signed-off-by: Dave Airlie <airlied@redhat.com>
>>>> Hey,
>>>>
>>>> Can you try current head with CONFIG_PROVE_LOCKING set and post the
>>>> lockdep splat from dmesg, if any? If there is any locking issue
>>>> lockdep should warn about it.  Lockdep will turn itself off after the
>>>> first splat, so if the lockdep splat happens before running the
>>>> affected parts those will have to be fixed first.
>>> There was an unrelated EDAC lockdep splat, so I simply disabled it.

> >>> This is what I get:

>>> Jul 10 11:40:44 x4 kernel: ================================================
>>> Jul 10 11:40:44 x4 kernel: [ BUG: lock held when returning to user space! ]
>>> Jul 10 11:40:44 x4 kernel: 3.10.0-08587-g496322bc #35 Not tainted
>>> Jul 10 11:40:44 x4 kernel: ------------------------------------------------
>>> Jul 10 11:40:44 x4 kernel: X/211 is leaving the kernel with locks still held!
>>> Jul 10 11:40:44 x4 kernel: 2 locks held by X/211:
>>> Jul 10 11:40:44 x4 kernel: #0:  (reservation_ww_class_acquire){+.+.+.}, at: [<ffffffff813279f0>] radeon_bo_list_validate+0x20/0xd0
>>> Jul 10 11:40:44 x4 kernel: #1:  (reservation_ww_class_mutex){+.+.+.}, at: [<ffffffff81309306>] ttm_eu_reserve_buffers+0x126/0x4b0
>>> Jul 10 11:40:52 x4 kernel: SysRq : Emergency Sync
>>> Jul 10 11:40:53 x4 kernel: Emergency Sync complete
>>>
>> Thanks, exactly what I thought. I missed a backoff somewhere..
>>
>> Does the below patch fix it?
> Yes. Thank you for your quick reply.

8<------
If radeon_cs_parser_relocs fails ttm_eu_backoff_reservation doesn't get called.
This left open a bug where ttm_eu_reserve_buffers succeeded but the bo's were
not unlocked afterwards:

Jul 10 11:40:44 x4 kernel: ================================================
Jul 10 11:40:44 x4 kernel: [ BUG: lock held when returning to user space! ]
Jul 10 11:40:44 x4 kernel: 3.10.0-08587-g496322bc #35 Not tainted
Jul 10 11:40:44 x4 kernel: ------------------------------------------------
Jul 10 11:40:44 x4 kernel: X/211 is leaving the kernel with locks still held!
Jul 10 11:40:44 x4 kernel: 2 locks held by X/211:
Jul 10 11:40:44 x4 kernel: #0:  (reservation_ww_class_acquire){+.+.+.}, at: [<ffffffff813279f0>] radeon_bo_list_validate+0x20/0xd0
Jul 10 11:40:44 x4 kernel: #1:  (reservation_ww_class_mutex){+.+.+.}, at: [<ffffffff81309306>] ttm_eu_reserve_buffers+0x126/0x4b0
Jul 10 11:40:52 x4 kernel: SysRq : Emergency Sync
Jul 10 11:40:53 x4 kernel: Emergency Sync complete

This is a regression caused by commit ecff665f.
"drm/ttm: make ttm reservation calls behave like reservation calls"
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Tested-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Lighter weight than using the 3D engine.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Lighter weight than using the 3D engine.

v2: fix ring count
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

They still seem to cause instability on some r6xx parts.
As a follow up, we can switch to using CP DMA for bo
moves on r6xx as a lighter weight alternative to using
the 3D engine.

A version of this patch should also go to stable kernels.
Tested-by: NJ.N. <golden.fleeced@gmail.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Gfx PG doesn't seem to work properly when UVD is initialized
on certain PALM boards.  Disable gfx PG for now until we sort
out a proper fix.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Prevents a segfault if an afmt block is not assigned to the
encoder such as in the LVDS or eDP case.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=66714Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the vblank time is too short to adjust mclk,
assume multiple displays (no mclk adjustments).
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Required for checking vblank time for mclk changes.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Looks like a remnant from an old rebase.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check the driver state rather than the register as the
crtc registers may not be enabled yet.

Should fix:
https://bugzilla.kernel.org/show_bug.cgi?id=60510
https://bugs.freedesktop.org/show_bug.cgi?id=66651Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows you to force the selected performance level via sysfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows you to force the selected performance level via sysfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows you to force the selected performance level via sysfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows you to force a performance level via sysfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows you to limit the selected power levels via sysfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows you to force specific power levels within a power
state.  Due to hardware restrictions between generations, the
interface is limited to the following 3 selections:

auto: all levels enabled
low: forced to the lowest power level
high: forced to the highest power level
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

r1xx asics have a slightly different surface register
setup compared to newer asics.  There is no specific
enable bit for macro tiling, rather, to disable macro
tiling, you need to set the surface pitch to 0.

With this fixed, the special rn50 handling can go.
Noticed-by: NMark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Certain older rv770 asics have both a performance and
a 3D performance state rather than just multiple performance
levels in the state power state.  The current code would
select the performance state rather than the 3D performance
state when the "performance" profile was selected.  This change
switches to the "balanced" profile by default which ends up being
the internal performance profile.  When the user selects the
"performance" profile, it selects the internal 3D performance
state so the user can select the higher performance modes.

For most asics this changes nothing.  For certain rv770 asics
with static performance and 3D performance states, this allows
you to select between then using by selecting the "balanced"
and "performance" dpm profiles.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix patching of vddc values for SI and enable manually forcing
clocks to default levels as per NI.

This improves the out of the box performance with SI asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some asic revisions need to disable PG when UVD is active.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Causes hangs for some people.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Causes hangs for some people.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

They cause problems with dynamic clocking.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add #include <linux/seq_file.h> to *_dpm.c files
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For chips without debugfs dpm support say that it's not
implemented rather than not supported to avoid confusion
about DPM support in general.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows you to look at the current DPM state via
debugfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows you to look at the current DPM state via
debugfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows you to look at the current DPM state via
debugfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows you to look at the current DPM state via
debugfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows you to look at the current DPM state via
debugfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>