- Recognise Hauppauge card #34519
Signed-off-by: NIan Pickworth <ian@pickworth.me.uk>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Add PCI ID for DigitalNow DVB-T Dual,
rebranded DViCO FusionHDTV DVB-T Dual.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Add PCI ID for UltraView DVB-T Plus,rebranded DViCO FusionHDTV DVB-T Plus
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- Clean up a recently introduced spaces vs tabs whitespace problem.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Support for DVB reception on the PCI half of the DViCO DVB-T Dual Digital.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Add Kworld/Vstream Xpert DVB-T card with cx22702 tuner.
Signed-off-by: NManenti Marco <marco_manenti@colman.it>
Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Added support for VP-3054 (aka DigitalNow DNTV Live! DVB-T Pro!).
- This board has a secondary I2C bus and remote control.
- Added a new module to handle secondary I2C bus on this board.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Corrected Thomson DTT 7611 tuner programming, based on spec sheet
- renamed to Thomson DTT 761x
- applies to DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A
(DTT 7610 is similar, but slightly different programming)
- corrected frequency ranges for analog and digital modes
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- This patch adds eeprom awareness for the Roslyn. In effect, the
blackbird will query the tuner V4L2_STD_xxxx definitions to determine
whether it's connected to a NTSC or PAL tuner. Based on that, various
default values will change for blackbird encoding.
- Fixes back panel SVIDEO/COMPOSITE with audio, work properly.
- Fixes a problem with lip sync issues, due to bad framerate vs
audio rate assumptions.
- Fixed a problem with the GPIO configuration in cx88-cards.
- Removed the comments in cx88-cards that made no sense.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Add support for another Nova-T-PCI PCI subdevice 0x9001
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Add support for the Hauppauge HVR1100 and HVR1100-LP products.
- Add i2c_gate_ctrl callback function to dvb_frontend_ops struct.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Add support for KWorld DVB-S 100, based on the same chips as Hauppauge
Nova-S Plus (CX23883/CX24123/CX24109), without the Intersil ISL6421,
which is used for LNB control.
- LNB voltage and tone are controled by LNBDC and LNBTone bits from
register 0x29 of the CX24123 demodulator.
- The MO_GP0_IO register from CX23883 is used to turn LNB power on and off.
Signed-off-by: NVadim Catana <skystar@moldova.cc>
Acked-by: NJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Enable IR support for the Nova-S-Plus.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Added V4L support for the Nova-S-Plus and Nova-SE2 DVB-S products.
- Basic DVB-S support is working, analog video inputs work.
- It has one or two fixme comments, primarily analog GPIOs (audio) and eeprom parsing.
- CX24123 code (in cx88-dvb.c) disabled until the
- cx24123 module is added to dvb-kernel cvs.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- fix analog NTSC for pcHDTV 3000
- Fix regression: broken analog NTSC for DViCO FusionHDTV3 Gold-T
- add tda9887 to card struct, required for both cards.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Fixed code handling for eeprom on cx88 boards.

- Hauppauge released a new version of the Nova-T-PCI (9002) a few months ago
  with a different (compatible) tuner (but lacking RF passthru).  The official
  model# is 90003.  All features are working.

- Adding entry to the known model list after testing.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Added a mac address field to the tveeprom structure.

- allow callers to query the MAC address.

- removed some redundant eeprom parsing code in cx88-cards.c (specific to
  Hauppauge DVB products) Instead, placed calls directly to the single eeprom
  parsing function in tveeprom.c
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Include comments for DVB models and includes missing ones
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- New Avermedia 303 card (without radio).
Signed-off-by: NLubomir Bulej <bulej@nenya.ms.mff.cuni.cz>
Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Added support for NXT200X based cards (ATI HDTV Wonder)
Signed-off-by: NKirk Lapray <kirk.lapray@gmail.com>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Whitespace Cleanups.
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- New config option for tda9887 to specifically set intercarrier
Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Add DVB card WinFast DTV1000-T
Signed-off-by: NDavid Shirley <David.Shirley@team.telstra.com>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Added analog support for ATI HDTV Wonder
Signed-off-by: NKirk Lapray <kirk.lapray@gmail.com>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Added Kworld Vstream ExpertDVD.
Signed-off-by: NAlexander Wold <awold@bigfoot.com>
Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Capitalized hex A-F changed to lowercase in pci subsystem id constants
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Added new Avermedia card 550
Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- tveeprom improved and updated to reflect newer Hauppage cards.
- CodingStyle fixes.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Remove $Id CVS logs for V4L files
- add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to
  cx88-blackbird.c.
- declare the indirection hooks from cx88-blackbird.c.
- dcprintk macro which uses core instead of dev->core on cx88-video.c.
- replace dev->core occurances with core on cx88-video.c.
- CodingStyle fixes.
- MaxInput replaced by a define.
- cx8801 structures moved from cx88.h.
- The output_mode needs to be set for the Hauppauge Nova-T DVB-T
  for versions after 2.6.12.
- Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite.
- Updated DViCO FusionHDTV5 Gold & added DVB support.
- Fixed DViCO FusionHDTV 3 Gold-Q GPIO.
- Some clean up in cx88-tvaudio.c
- replaced hex values when writing to AUD_CTL to EN_xx for better reading.
- Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC.
- Support for stereo NICAM and BTSC improved.
- Broken stereo check removed.
- Added support for remote control to Cinergy DVBT-1400.
- local var renamed from rc5 to a better name (ircode).
- LGDT330X QAM lock bug fixes.
- Some reorg: move some bits to struct cx88_core, factor out common ioctl's
  to cx88_do_ioctl.
- Get rid of '//' comments, replace them with #if 0 and /**/.
- Minor clean-ups: remove dcprintk and replace all instances of "dev->core"
  with "core".
- Added some registers to control PCI controller at CX2388x chips.
- New tuner standby API.
- Small mpeg fixes and cleanups for blackbird.
- fix mpeg packet size & count
- add VIDIOC_QUERYCAP ioctl for the mpeg stream
- return more information in struct v4l2_format
- fix default window height
- small cleanups
Signed-off-by: NUli Luckas <luckas@musoft.de>
Signed-off-by: NTorsten Seeboth <Torsten.Seeboth@t-online.de>
Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NPatrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: NCatalin Climov <catalin@climov.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Peter Missel:
- Add support for the SVideo input on the GDI Black Gold.

Mauro Carvalho Chehab:
- Linux/version.h removed. Replaced by linux/utsname.h

Michael Krufky:
- Added analog support for DViCO FusionHDTV5 Gold.

CC: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Fixed some bttv card numbers.

- BTTV and SAA7134 version numbers incremented to reflect changes.

- pci_dma_supported() is called after pci_set_dma_mask() which
  already did check that for us. This patch removes the unneeded call to
  pci_dma_supported() at bttv-driver.c

- Ensure a sufficient I2C bus idle time between 2 messages for
  saa7134-i2c.c

- It is important to write at first to MO_GP3_IO for cx88-tvaudio.c

- Use try_to_freeze() instead of refrigerator at msp3400.c

- Recognizing the MFPE05-2 Tuner at tveeprom.c

- Add new parameter to help identify radio chipsets at tuner module:
  show_i2c=1 will show 16 reading bytes from detected tuners.

- BTTV does generate some Unimplemented IOCTL log at tuner module:
  0x40046d11(dir=1,tp=0x6d,nr=17,sz=4) means that it is sending
  MSP3400 calls to non-msp3400 tuners. Warning eliminated.
  VIDIOSAUDIO is also called, so debug messages updated. It is still
  requiring IOCTL implementation.

- Added two more tuners.

- Add support for the SVideo input on the GDI Black Gold.
Signed-off-by: NPeter Missel <peter.missel@onlinehome.de>
Signed-off-by: NGraham Bevan <graham.bevan@ntlworld.com>
Signed-off-by: NTorsten Seeboth <Torsten.Seeboth@t-online.de>
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t.online.de>
Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- In CX88 code, some cards needs to have audio reprogramed after changing
  video channel;

- Tuner autodetection code seems not to work on some cards.  Now,
  no_autodetect insmod option allows disabling autodetection code;

- Minor fixes in tea5767 to reduce integer trunc;

- There are some new Pixelview Ultra Pro cards that doesn't use TEA5767
  for radio.  As autodetection is capable of checking for tea, radio tuners
  and addresses removed.

- CX88 version number incremented.
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Correct sync byte for MPEG-2 transport stream packets.
- Add lgdt3302 as dependency of cx88-dvb in Kconfig.
- Add dvb support in v4l for DViCO FusionHDTV3 Gold-T using lgdt3302 frontend.
  This adds support for a different board from the previous (Gold-Q) patch.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for TerraTec Cinergy 1400 DVB-T.
Signed-off-by: NUli Luckas <luckas@musoft.de>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add dvb support in v4l for DViCO FusionHDTV3 Gold-Q using lgdt3302 frontend.
Signed-off-by: NMac Michaels <wmichaels1@earthlink.net>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Add support for ADS Tech Instant TV DVB-T PCI.
- Remove obsoleted config options.
- Fix DViCO Board names
- Remove CABLE type setting from DViCO FusionHDTV3 Gold-T.
- Fix compilation with gcc4.0.
- V4L2_TUNER_CAP_LOW implemented according with V4L2 API for Radio.
- radio range is now defined on tuner-core.c. Cleaning up.
- Fix a bug on frequency report for cx88 based cards.
- Added support for changing radio mode stereo/mono.
- Add remove for MSI TV@nywhere.

Signed-off-by: Jorik Jonker <jorik@dnd.utwente.nl>.
Signed-off-by: NDidier Caillaud <mailing.cld@free.fr>
Signed-off-by: Benoit Laniel <benoit.laniel@gmail.com>.
Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds support for various CX88 cards and allows specifying
card addresses.
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: Ncybercide@f2s.com <cybercide@f2s.com>
Signed-off-by: NCatalin Climov <catalin@climov.com>
Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for tuner#60: Thomson DDT 7611 (ATSC/NTSC) Change tuner in
card#28 (DViCO FusionHDTV3 Gold-T) from tuner=52 (Tuner Thomson DDT 7610)
to tuner=60 (Tuner Thomson DDT 7611)
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Even though it says DViCO FusionHDTV3 Gold-Q on the box, Gold-T is printed
on the card.  This fix corrects the error in all places, and corrects the
tuner name Thomson DDT 7611 (ATSC/NTSC) in the documentation.

This applies against 2.6.12-rc5-mm2 after applying Manueal Capinha's
patch "Add support for PixelView Ultra Pro in v4l" (because of the
change from card=27 to card=28)
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch adds support for the PixelView Ultra Pro video capture
card in v4l.

- It removes the remote control key definitions from ir-kbd-gpio.c and
  moves them to ir-common.c so that they can be shared between bt878 and
  cx88 based cards.

- The patch also moves the FUSIONHDTV_3_GOLD_Q card from number 27 to 28
  to regain compatibility with the V4L cvs.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>