Saving -EINVAL as unsigned char truncates the high bits and changes it
into 234 instead of -22.  This breaks the test for "if (ret == -EINVAL)"
in parse_opts().
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

dcache prune happen on umount. So we cannot mark the client
satus disconnect. That will prevent a 9p call to the server
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This patch changes the name of the new 9P protocol from 9p2010.L to
9p2000.u. This is because we learnt that the name 9p2010 is already
being used by others.
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This patch adds 9P2010.L protocol negotiation with the server
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Removes 'dotu' variable and make everything dependent
on 'proto_version' field.
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Add new mount V9FS mount option to specify protocol version

This patch adds a new mount option to specify protocol version.
With this option it is possible to use "-o version=" switch to
specify 9P protocol version to use. Valid options for version
are:
9p2000
9p2000.u
9p2010.L
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

restructure client create code to handle error cases better and
only cleanup initialized portions of the stack.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@us.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Options pointer is being moved before calling kfree() which seems
to cause problems.  This uses a separate pointer to track and free
original allocation.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@us.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>w

stat structures contain a size prefix.  In our twstat messages
we were including the size of the size prefix in the prefix, which is not
what the protocol wants, and Inferno servers would complain.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

If the user specifies a transport and we can't find it, we failed back
to the default trainsport silently.  This patch will make the code
complain more loudly and return an error code.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

The patch below also addresses a couple of other corner cases in readdir
seen with a large (e.g. 64k) msize.  I'm not sure what people think of
my co-opting of fid->aux here.  I'd be happy to rework if there's a better
way.

When the size of the user supplied buffer passed to readdir is smaller
than the data returned in one go by the 9P read request, v9fs_dir_readdir()
currently discards extra data so that, on the next call, a 9P read
request will be issued with offset < previous offset + bytes returned,
which voilates the constraint described in paragraph 3 of read(5) description.
This patch preseves the leftover data in fid->aux for use in the next call.
Signed-off-by: NJim Garlick <garlick@llnl.gov>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

A looney tunes server sending an invalid error code (which is !IS_ERR_VALUE)
can result in a client oops. So fix it by adding a check and converting unknown
or invalid error codes to -ESERVERFAULT.
Signed-off-by: NAbhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Fix the comments -- mostly the improper and/or missing descriptions
of function parameters.
Signed-off-by: NAbhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Fix a possible regression with p9_client_stat where it can try to kfree 
an ERR_PTR after an erroneous p9pdu_readf. Also remove an unnecessary data 
buffer increment in p9_client_read.
Signed-off-by: NAbhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

The default 9p transport module is not chosen unless an option parameter (any)
is passed to mount, which thus returns a ENOPROTOSUPPORT. This fix moves the
check out of parse_opts into p9_client_create.
Signed-off-by: NAbhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Currently the 9p code crashes when a operation is interrupted, i.e. for
example when the user presses ^C while reading from a file.

This patch fixes the code that is responsible for interruption and flushing
of 9P operations.
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>

p9_client_stat function doesn't return correct value if it fails.
p9_client_stat should return ERR_PTR of the error value when it fails.
Instead, it always returns a value to the allocated p9_wstat struct even
when it is not populated correctly.

This patch makes p9_client_stat to handle failure correctly.
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>
Reviewed-by: NEric Van Hensbergen <ericvh@gmail.com>

The 9P2000 Twstat message requires the size of the stat structure to be
specified. Currently the 9p code writes zero instead of the actual size.
This behavior confuses some of the file servers that check if the size is
correct.

This patch adds a new function that calculcates the stat size and puts the
value in the appropriate place in the 9P message.
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>
Reviewed-by: NEric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NJames Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Reviewed-by: NEric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: v9fs-developer@lists.sourceforge.net
Signed-off-by: NJames Morris <jmorris@namei.org>

Fix printk format warnings in net/9p.
Built cleanly on 7 arches.

net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64'
net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

If a T or R fcall cannot be allocated, the function returns an error
but neglects to free the wait queue that was successfully allocated.

If it comes through again a second time this wq will be overwritten
with a new allocation and the old allocation will be leaked.

Also, if the client is subsequently closed, the close path will
attempt to clean up these allocations, so set the req fields to
NULL to avoid duplicate free.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

T and R fcall are reused until the client is destroyed. There does
not need to be a special case for Flush
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

The client lock must be IRQ safe. Some of the lock acquisition paths
took regular spin locks.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Fix printk format warnings in net/9p.
Built cleanly on 7 arches.

net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64'
net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several sparse warnings were introduced by patches accepted during the merge
window which weren't caught.  This patch fixes those warnings.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

The new debug support lacks some of the information that the previous fcprint
code provided -- this patch focuses on better presentation of debug data along
with more helpful debug along error paths.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Now that the new protocol functions are in place, this patch switches
the client code to using the new support code.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

One of the current debug options allows users to get a verbose dump of fcalls.
This isn't really necessary as correctly parsed protocol frames can be printed
as part of the code in the client functions.  The consolidated printfcalls
structure would require new entries to be added for every extension.  This
patch removes the debug print methods and their use.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Alsmot all 9P client wire functions have their own (set of) functions.
Tversion is an exception as its encapsulated into the client_create code.

This patch moves the protocol specifics of this to a function to match the
rest of the code.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Currently reading a directory is implemented in the client code.
This function is not actually a wire operation, but a meta operation 
which calls read operations and processes the results.

This patch moves this functionality to the fs layer and calls component
wire operations instead of constructing their packets.  This provides a 
cleaner separation and will help when we reorganize the client functions
and protocol processing methods.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

There are a couple of methods in the client code which aren't actually
wire operations.  To keep things organized cleaner, these operations are
being moved to the fs layer.

This patch moves the readn meta-function (which executes multiple wire
reads until a buffer is full) to the fs layer.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Currently there are two separate versions of read and write.  One for
dealing with user buffers and the other for dealing with kernel buffers.
There is a tremendous amount of code duplication in the otherwise
identical versions of these functions.  This patch adds an additional
user buffer parameter to read and write and conditionalizes handling of
the buffer on whether the kernel buffer or the user buffer is populated.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This code moves the rpc function to the common client base,
reorganizes the flush code to be more simple and stable, and
makes the necessary adjustments to the underlying transports
to adapt to the new structure.

This reduces the overall amount of code duplication between the
transports and should make adding new transports more straightforward.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Apply the now common p9_req_t structure to the fd transport.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

The virtio transport uses a simplified request management system
that I want to use for all transports.  This patch adapts and moves the
exisiting code for managing requests to the client common code.
Later patches will apply these mechanisms to the other transports.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Cleanup files by reordering functions in order to remove need for
unnecessary function prototypes.

There are no code changes here, just functions being moved around and
prototypes being eliminated.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Right now there is a transport module structure which provides per-transport
type functions and data and a transport structure which contains per-instance
public data as well as function pointers to instance specific functions.

This patch moves public transport visible instance data to the client
structure (which in some cases had duplicate data) and consolidates the
functions into the transport module structure.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.

This was posted for review some time ago and I believe its been in -mm
since then.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>