When dynamic ftrace is not configured, the ops->flags still needs
to have its FTRACE_OPS_FL_ENABLED bit set in ftrace_startup().
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The register_ftrace_function() returns an error code on failure
except if the call to ftrace_startup() fails. Add a error return to
ftrace_startup() if it fails to start, allowing register_ftrace_funtion()
to return a proper error value.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Since users of the function tracer can now pick and choose which
functions they want to trace agnostically from other users of the
function tracer, we need to pass the ops struct to the ftrace_set_filter()
functions.

The functions ftrace_set_global_filter() and ftrace_set_global_notrace()
is added to keep the old filter functions which are used to modify
the generic function tracers.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Now that functions may be selected individually, it only makes sense
that we should allow dynamically allocated trace structures to
be traced. This will allow perf to allocate a ftrace_ops structure
at runtime and use it to pick and choose which functions that
structure will trace.

Note, a dynamically allocated ftrace_ops will always be called
indirectly instead of being called directly from the mcount in
entry.S. This is because there's no safe way to prevent mcount
from being preempted before calling the function, unless we
modify every entry.S to do so (not likely). Thus, dynamically allocated
functions will now be called by the ftrace_ops_list_func() that
loops through the ops that are allocated if there are more than
one op allocated at a time. This loop is protected with a
preempt_disable.

To determine if an ftrace_ops structure is allocated or not, a new
util function was added to the kernel/extable.c called
core_kernel_data(), which returns 1 if the address is between
_sdata and _edata.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_ops that are registered to trace functions can now be
agnostic to each other in respect to what functions they trace.
Each ops has their own hash of the functions they want to trace
and a hash to what they do not want to trace. A empty hash for
the functions they want to trace denotes all functions should
be traced that are not in the notrace hash.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When a hash is modified and might be in use, we need to perform
a schedule RCU operation on it, as the hashes will soon be used
directly in the function tracer callback.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This is a step towards each ops structure defining its own set
of functions to trace. As the current code with pid's and such
are specific to the global_ops, it is restructured to be used
with the global ops.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In order to allow different ops to enable different functions,
the ftrace_startup() and ftrace_shutdown() functions need the
ops parameter passed to them.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add the enabled_functions file that is used to show all the
functions that have been enabled for tracing as well as their
ref counts. This helps seeing if any function has been registered
and what functions are being traced.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Every function has its own record that stores the instruction
pointer and flags for the function to be traced. There are only
two flags: enabled and free. The enabled flag states that tracing
for the function has been enabled (actively traced), and the free
flag states that the record no longer points to a function and can
be used by new functions (loaded modules).

These flags are now moved to the MSB of the flags (actually just
the top 32bits). The rest of the bits (30 bits) are now used as
a ref counter. Everytime a tracer register functions to trace,
those functions will have its counter incremented.

When tracing is enabled, to determine if a function should be traced,
the counter is examined, and if it is non-zero it is set to trace.

When a ftrace_ops is registered to trace functions, its hashes
are examined. If the ftrace_ops filter_hash count is zero, then
all functions are set to be traced, otherwise only the functions
in the hash are to be traced. The exception to this is if a function
is also in the ftrace_ops notrace_hash. Then that function's counter
is not incremented for this ftrace_ops.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When filtering, allocate a hash to insert the function records.
After the filtering is complete, assign it to the ftrace_ops structure.

This allows the ftrace_ops structure to have a much smaller array of
hash buckets instead of wasting a lot of memory.

A read only empty_hash is created to be the minimum size that any ftrace_ops
can point to.

When a new hash is created, it has the following steps:

o Allocate a default hash.
o Walk the function records assigning the filtered records to the hash
o Allocate a new hash with the appropriate size buckets
o Move the entries from the default hash to the new hash.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Combine the filter and notrace hashes to be accessed by a single entity,
the global_ops. The global_ops is a ftrace_ops structure that is passed
to different functions that can read or modify the filtering of the
function tracer.

The ftrace_ops structure was modified to hold a filter and notrace
hashes so that later patches may allow each ftrace_ops to have its own
set of rules to what functions may be filtered.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When multiple users are allowed to have their own set of functions
to trace, having the FTRACE_FL_FILTER flag will not be enough to
handle the accounting of those users. Each user will need their own
set of functions.

Replace the FTRACE_FL_FILTER with a filter_hash instead. This is
temporary until the rest of the function filtering accounting
gets in.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

To prepare for the accounting system that will allow multiple users of
the function tracer, having the FTRACE_FL_NOTRACE as a flag in the
dyn_trace record does not make sense.

All ftrace_ops will soon have a hash of functions they should trace
and not trace. By making a global hash of functions not to trace makes
this easier for the transition.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The code used for matching functions is almost identical between normal
selecting of functions and using the :mod: feature of set_ftrace_notrace.

Consolidate the two users into one function.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are three locations that perform almost identical functions in order
to update the ftrace_trace_function (the ftrace function variable that gets
called by mcount).

Consolidate these into a single function called update_ftrace_function().
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The updating of a function record is moved to a single function. This will allow
us to add specific changes in one location for both modules and kernel
functions.

Later patches will determine if the function record itself needs to be updated
(which enables the mcount caller), or just the ftrace_ops needs the update.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Since we disable all function tracer processing if we detect
that a modification of a instruction had failed, we do not need
to track that the record has failed. No more ftrace processing
is allowed, and the FTRACE_FL_CONVERTED flag is pointless.

The FTRACE_FL_CONVERTED flag was used to denote records that were
successfully converted from mcount calls into nops. But if a single
record fails, all of ftrace is disabled.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Since we disable all function tracer processing if we detect
that a modification of a instruction had failed, we do not need
to track that the record has failed. No more ftrace processing
is allowed, and the FTRACE_FL_FAILED flag is pointless.

Removing this flag simplifies some of the code, but some ftrace_disabled
checks needed to be added or move around a little.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The failures file in the debugfs tracing directory would list the
functions that failed to convert when the old dead ftrace daemon
tried to update code but failed. Since this code is now dead along
with the daemon the failures file is useless. Remove it.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The disabling of interrupts around ftrace_update_code() was used
to protect against the evil ftrace daemon from years past. But that
daemon has long been killed. It is safe to keep interrupts enabled
while updating the initial mcount into nops.

The ftrace_mutex is also held which keeps other users at bay.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Let FTRACE_WARN_ON() be used as a stand alone statement or
inside a conditional: if (FTRACE_WARN_ON(x))
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If function tracing is enabled, a read of the filter files will
cause the call to stop_machine to update the function trace sites.
It should only call stop_machine on write.

Cc: stable@kernel.org
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

If one or more function probes (like traceon) are enabled,
and there's no other function filter, the first probe
func is skipped (which one depends on the position in the hash).

$ echo sys_open:traceon sys_close:traceon > ./set_ftrace_filter
$ cat set_ftrace_filter
#### all functions enabled ####
sys_close:traceon:unlimited
$

The reason was, that in the case of no other function filter,
the func_pos was not properly updated before calling t_hash_start.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
LKML-Reference: <1297874134-7008-1-git-send-email-jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When the fuction graph tracer starts, it needs to make a special
stack for each task to save the real return values of the tasks.
All running tasks have this stack created, as well as any new
tasks.

On CPU hot plug, the new idle task will allocate a stack as well
when init_idle() is called. The problem is that cpu hotplug does
not create a new idle_task. Instead it uses the idle task that
existed when the cpu went down.

ftrace_graph_init_task() will add a new ret_stack to the task
that is given to it. Because a clone will make the task
have a stack of its parent it does not check if the task's
ret_stack is already NULL or not. When the CPU hotplug code
starts a CPU up again, it will allocate a new stack even
though one already existed for it.

The solution is to treat the idle_task specially. In fact, the
function_graph code already does, just not at init_idle().
Instead of using the ftrace_graph_init_task() for the idle task,
which that function expects the task to be a clone, have a
separate ftrace_graph_init_idle_task(). Also, we will create a
per_cpu ret_stack that is used by the idle task. When we call
ftrace_graph_init_idle_task() it will check if the idle task's
ret_stack is NULL, if it is, then it will assign it the per_cpu
ret_stack.
Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Unnecessary cast from void* in assignment.
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>

The enums for FTRACE_ENABLE_MCOUNT and FTRACE_DISABLE_MCOUNT were
used as commands to ftrace_run_update_code(). But these commands
were used by the old nasty ftrace daemon that has long been slain.

This is a clean up patch to remove the references to these enums
and simplify the code a little.
Reported-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If we do:

 # cd /sys/kernel/debug
 # echo 'do_IRQ:traceon schedule:traceon sys_write:traceon' > \
    set_ftrace_filter
 # cat set_ftrace_filter

We get the following output:

 #### all functions enabled ####
 sys_write:traceon:unlimited
 schedule:traceon:unlimited
 do_IRQ:traceon:unlimited

This outputs two lists. One is the fact that all functions are
currently enabled for function tracing, the other has three probed
functions, which happen to have 'traceon' as their commands.

Currently, when reading the first list (functions enabled) the
seq_file code will receive a "NULL" from the t_next() function
causing it to exit early. This makes "read()" from userspace stop
reading the code at this boarder. Although read is allowed to do this,
some (broken) applications might consider this an end of file and
stop early.

This patch adds the start of the second list to t_next() when it
finishes the first list. It is a simple change and gives the
set_ftrace_filter file nicer reading ability.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch keeps track of the index within the elements of
set_ftrace_filter and if the position goes backwards, it nicely
resets and starts from the beginning again.

This allows for lseek and pread to work properly now.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The set_ftrace_filter uses seq_file and reads from two lists. The
pointer returned by t_next() can either be of type struct dyn_ftrace
or struct ftrace_func_probe. If there is a bug (there was one)
the wrong pointer may be used and the reference can cause an oops.

This patch makes t_next() and friends only return the iterator structure
which now has a pointer of type struct dyn_ftrace and struct
ftrace_func_probe. The t_show() can now test if the pointer is NULL or
not and if the pointer exists, it is guaranteed to be of the correct type.

Now if there's a bug, only wrong data will be shown but not an oops.

Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

After the filtered functions are read, the probed functions are read
from the hash in set_ftrace_filter. When the hashed probed functions
are read, the *pos passed in is reset. Instead of modifying the pos
given to the read function, just record the pos where the filtered
functions ended and subtract from that.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Be sure to avoid entering t_show() with FTRACE_ITER_HASH set without
having properly started the iterator to iterate the hash.  This case is
degenerate and, as discovered by Robert Swiecki, can cause t_hash_show()
to misuse a pointer.  This causes a NULL ptr deref with possible security
implications.  Tracked as CVE-2010-3079.

Cc: Robert Swiecki <swiecki@google.com>
Cc: Eugene Teo <eugene@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Reading the file set_ftrace_filter does three things.

1) shows whether or not filters are set for the function tracer
2) shows what functions are set for the function tracer
3) shows what triggers are set on any functions

3 is independent from 1 and 2.

The way this file currently works is that it is a state machine,
and as you read it, it may change state. But this assumption breaks
when you use lseek() on the file. The state machine gets out of sync
and the t_show() may use the wrong pointer and cause a kernel oops.

Luckily, this will only kill the app that does the lseek, but the app
dies while holding a mutex. This prevents anyone else from using the
set_ftrace_filter file (or any other function tracing file for that matter).

A real fix for this is to rewrite the code, but that is too much for
a -rc release or stable. This patch simply disables llseek on the
set_ftrace_filter() file for now, and we can do the proper fix for the
next major release.
Reported-by: NRobert Swiecki <swiecki@google.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Eugene Teo <eugene@redhat.com>
Cc: vendor-sec@lst.de
Cc: <stable@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

While we are reading trace_stat/functionX and someone just
disabled function_profile at that time, we can trigger this:

	divide error: 0000 [#1] PREEMPT SMP
	...
	EIP is at function_stat_show+0x90/0x230
	...

This fix just takes the ftrace_profile_lock and checks if
rec->counter is 0. If it's 0, we know the profile buffer
has been reset.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: stable@kernel.org
LKML-Reference: <4C723644.4040708@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ftrace_preempt_disable/enable functions were to address a
recursive race caused by the function tracer. The function tracer
traces all functions which makes it easily susceptible to recursion.
One area was preempt_enable(). This would call the scheduler and
the schedulre would call the function tracer and loop.
(So was it thought).

The ftrace_preempt_disable/enable was made to protect against recursion
inside the scheduler by storing the NEED_RESCHED flag. If it was
set before the ftrace_preempt_disable() it would not call schedule
on ftrace_preempt_enable(), thinking that if it was set before then
it would have already scheduled unless it was already in the scheduler.

This worked fine except in the case of SMP, where another task would set
the NEED_RESCHED flag for a task on another CPU, and then kick off an
IPI to trigger it. This could cause the NEED_RESCHED to be saved at
ftrace_preempt_disable() but the IPI to arrive in the the preempt
disabled section. The ftrace_preempt_enable() would not call the scheduler
because the flag was already set before entring the section.

This bug would cause a missed preemption check and cause lower latencies.

Investigating further, I found that the recusion caused by the function
tracer was not due to schedule(), but due to preempt_schedule(). Now
that preempt_schedule is completely annotated with notrace, the recusion
no longer is an issue.
Reported-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch adds data to be passed to tracepoint callbacks.

The created functions from DECLARE_TRACE() now need a mandatory data
parameter. For example:

DECLARE_TRACE(mytracepoint, int value, value)

Will create the register function:

int register_trace_mytracepoint((void(*)(void *data, int value))probe,
                                void *data);

As the first argument, all callbacks (probes) must take a (void *data)
parameter. So a callback for the above tracepoint will look like:

void myprobe(void *data, int value)
{
}

The callback may choose to ignore the data parameter.

This change allows callbacks to register a private data pointer along
with the function probe.

	void mycallback(void *data, int value);

	register_trace_mytracepoint(mycallback, mydata);

Then the mycallback() will receive the "mydata" as the first parameter
before the args.

A more detailed example:

  DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  /* In the C file */

  DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  [...]

       trace_mytracepoint(status);

  /* In a file registering this tracepoint */

  int my_callback(void *data, int status)
  {
	struct my_struct my_data = data;
	[...]
  }

  [...]
	my_data = kmalloc(sizeof(*my_data), GFP_KERNEL);
	init_my_data(my_data);
	register_trace_mytracepoint(my_callback, my_data);

The same callback can also be registered to the same tracepoint as long
as the data registered is different. Note, the data must also be used
to unregister the callback:

	unregister_trace_mytracepoint(my_callback, my_data);

Because of the data parameter, tracepoints declared this way can not have
no args. That is:

  DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS());

will cause an error.

If no arguments are needed, a new macro can be used instead:

  DECLARE_TRACE_NOARGS(mytracepoint);

Since there are no arguments, the proto and args fields are left out.

This is part of a series to make the tracepoint footprint smaller:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class
4918492	1084612	 861512	6864616	 68bee8	vmlinux.tracepoint

Again, this patch also increases the size of the kernel, but
lays the ground work for decreasing it.

 v5: Fixed net/core/drop_monitor.c to handle these updates.

 v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the
     #ifdef CONFIG_TRACE_POINTS, since the two are the same in both
     cases. The __DECLARE_TRACE() is what changes.
     Thanks to Frederic Weisbecker for pointing this out.

 v3: Made all register_* functions require data to be passed and
     all callbacks to take a void * parameter as its first argument.
     This makes the calling functions comply with C standards.

     Also added more comments to the modifications of DECLARE_TRACE().

 v2: Made the DECLARE_TRACE() have the ability to pass arguments
     and added a new DECLARE_TRACE_NOARGS() for tracepoints that
     do not need any arguments.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

struct rq isn't visible outside of sched.o so its near useless to
expose the pointer, also there are no users of it, so remove it.
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272997616.1642.207.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When sleep_time is off the function profiler ignores the time that a task
is scheduled out. When the task is scheduled out a timestamp is taken.
When the task is scheduled back in, the timestamp is compared to the
current time and the saved calltimes are adjusted accordingly.

But when stopping the function profiler, the sched switch hook that
does this adjustment was stopped before shutting down the tracer.
This allowed some tasks to not get their timestamps set when they
scheduled out. When the function profiler started again, this would
skew the times of the scheduler functions.

This patch moves the stopping of the sched switch to after the function
profiler is stopped. It also ignores zero set calltimes, which may
happen on start up.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>