This patch adds the set-tai test which ensures the tai offset
can be set properly from adjtimex.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This change adds the leapcrash test which tests to see if a
leapsecond deadlock which was observed from 2.6.26 to 3.3
is present on this system.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This change adds the leap-a-day test which sets STA_INS and
STA_DEL each day to trigger leapseconds each day. It also
has a mode to jump the time to right before the end of the
day each iteration.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Adds the clocksource-switch tests which continually switches the
current clocksource between all the available ones, watching for
any timekeeping inconsistencies.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This change adds the skew_consistency test, which twists the
ADJ_FREQUENCY knob back and forth and watches for timekeeping
inconsistencies.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This patch adds the change_skew test which validates the
adjtimex freq can be set to various values and then using
the inconsistency-check, raw_skew, and nanosleep tests
ensures time behaves properly.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This adds the alarmtimer-suspend test from the timetests suite,
which tests that the alarmtimers wake the system up from suspend
shortly after the time they were set to fire.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This adds a adjtimex validation test which checks the behavior
for a set of valida and invalid inputs. So far this only tests
ADJ_FREQUENCY, but hopefully will grow.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add test to validate mqueue timeout latency from the timetest suite

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add the threaded time inconsistency test from the timetest suite.
This checks for time inconsistencies between cpus, usually associated
with clock skew as sometimes found w/ TSCs.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add my set-timer-lat test from the timetest suite. This
test checks the latency from set_timer and reports if
any are unreasonable (>40ms).

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This adds my clock skew estimation test from the timetest suite.
It measures the drift between CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW
and compares it with the current frequency value from adjtimex.

It sometimes can trigger false failures when ntpd isn't in a
steady state, but its a useful too when doing adjtimex testing.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Adds my nanosleep latency test from the timetest suite.
This checks to make sure we don't see "unreasonable"
latencies (> 40ms) when calling nanosleep.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This adds my inconsistency-test from my timetests suite,
which checks for (single threaded) time inconsistencies
across the various clockids.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add my basic nanosleep test from my timetest suite.
This test validates that nanosleep doesn't return early
against a number of clockids.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

The posix_timers.c test has a loop that tries to keep it in
kernel space, repeatedly calling brk(). However, it doesn't
check the return value, which causes warnings.

This patch adds a err value which captures the return value
and modifies the test so it will quit if a failure occurs.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Try to streamline the makefile so its easier to add timer/timekeeping
tests.

Also adds support for the CROSS_COMPILE variable.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Seems that some of the new console logic causes doprint to possibly
get evaluated. When printing a commit message that contains parenthesis,
it fails with a shell parsing error.

This gets fixed when we add quotes around the $item variable, and prevent
it from being evaluated by any shell commands.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If dodie() is called with the console open, restore the terminal's
original settings before dying.

Link: http://lkml.kernel.org/r/20150130025453.GB20952@treble.redhat.comSigned-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Since both success and failure may shortcut and exit ktest, it is better
to print the status times there too. Once times are printed, the values
for the times are reset, so they will not print more than once.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Allow the user to send input to the console by putting the terminal in
cbreak mode (to allow reading stdin one character at a time) and copying
all stdin data to the console's pty.

Link: http://lkml.kernel.org/r/bb1bbe7d202c95a3ce7894cfffdd8c725875978e.1422473610.git.jpoimboe@redhat.comSigned-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Create a pseudoterminal (pty pair) to give the console a dedicated tty
so it doesn't mess with ktest's terminal settings.

Link: http://lkml.kernel.org/r/37b0127f9efad09ff4fc994334db998141e4f6ca.1422473610.git.jpoimboe@redhat.comSigned-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The function start_monitor_and_boot is a misnomer. It use to, but
now it starts the monitor and installs. It does not boot. Rename it
before I get confused by it again.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Seeing the times for how long a build, install, reboot and the
test takes is helpful for analyzing the test process. Seeing
how different changes affect the timings.

Show the build, install, boot and test times when at the end of
the test, or between each interval for tests that do those
mulitple times (like bisect and patchcheck).
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When ktest runs the console program as a child process, the parent and
child share the same tty for stdin and stderr.  This is problematic when
using a libvirt target.  The "virsh console" program makes a lot of
changes to the tty settings, making ktest's output hard to read
(carriage returns don't work).  After ktest exits, the terminal is
unusable (CRs broken, stdin isn't echoed).

I think the best way to fix this issue would be to create a
pseudoterminal (pty pair) so the child process would have a dedicated
tty, and then use pipes to connect the two ttys.  I'm not sure if that's
overkill, but it's far beyond my current Perl abilities.

This patch is a much easier way to (partially) fix this issue.  It saves
the tty settings before opening the console and restores them after
closing it.  There are still a few places where ktest prints mangled
output while the console is open, but the output is much more legible
overall, and the terminal works just fine after ktest exits.

Link: http://lkml.kernel.org/r/1bb89abc0025cf1d6da657c7ba58bbeb4381a515.1422382008.git.jpoimboe@redhat.comSigned-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

I find that I usually like to see how long a make or other command takes,
and adding a start and end time and reporting how long each command runs
(in seconds) is helpful.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a testcase for the new ppc64 memcmp.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

mpe: Fix compile errors and formatting. Add tempfile logic to Makefile.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch includes all of the powerpc test binaries into the .gitignore
file listing in their respective directories. This will make sure that
git ignores all of these test binaries when displaying status.
Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

A system misconfiguration that prevents qemu from running at all (for
example, a missing dynamically linked library) will keep the console.log
file from the previous run.  This can fool the developer into thinking
that this failed run actually completed correctly.  This commit therefore
overwrites the console.log file just before launching qemu.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

More recent qemu implementations really want "-enable-kvm", and the
"-soundhw pcspk" makes the script a bit less dependent on odd audio
libraries being installed.  This commit therefore adds both to the
default qemu command line.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The mpstat command recently added the %gnice column, which messes up
the cpu2use.sh script's idle-CPU calculations.  This commit therefore
uses $NF instead of $12 to select the last (%idle) column.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Normal rcutorture checking overestimates grace periods somewhat due to
the fact that there is a delay from a grace-period request until the
start of the corresponding grace period and another delay from the end
of that grace period to notification of the requestor.  This means that
rcutorture's detection of RCU bugs is less sensitive than it might be.

It turns out that rcutorture also checks the underlying grace-period
"completed" counter (displayed in Reader Batch output), which in theory
allows rcutorture to do exact checks.  In practice, memory misordering
(by both compiler and CPU) can result in false positives.  However,
experience on x86 shows that these false positives are quite rare,
occurring less than one time per 1,000 hours of testing.  This commit
therefore does the exact checking, giving a warning if any Reader Batch
blows happen, and flagging an error if they happen more often than
once every three hours in long tests.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

add -lrt to fix undefined reference to `clock_gettime'
error seen when the test is compiled using gcc 4.6.4.
Signed-off-by: NAndrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

We can't use a char type to check for a negative return value since char
isn't guaranteed to be signed. Indeed, the char type tends to be unsigned on
ARM.
Signed-off-by: Ndann frazier <dann.frazier@canonical.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

When the shell fails to invoke a script because its path name
is too long (ENAMETOOLONG), most shells return 127 to indicate
command not found.  However, some systems report 126 (which POSIX
suggests should indicate a non-executable file) for this case,
so allow that too.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid Drysdale <drysdale@google.com>
Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

The current rcutorture scripting checks for actual stalls (via the "Call
Trace:" check), but fails to spot the case where a stall ends just as it
is being detected.  This commit therefore adds a check for this case.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

On 32-bit:

execveat.c: In function 'check_execveat_pathmax':
execveat.c:183: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t'
execveat.c:187: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'size_t'
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This list is supposed to be sorted, to reduce patch collisions.

Cc: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>