- 24 8月, 2017 1 次提交
-
-
由 Arnd Bergmann 提交于
Merge tag 'samsung-drivers-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Pull "Samsung soc drivers changes for v4.14" from Krzysztof Kozłowski: Conversion to kbasename from Rob Herring. * tag 'samsung-drivers-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: Use kbasename instead of open coding
-
- 23 8月, 2017 2 次提交
-
-
由 Thierry Reding 提交于
Commit 8a46828e623c ("soc/tegra: Register SoC device") added a new initcall, but forgot to terminate the line with a semi-colon. Some recent versions of GCC seem to report this as an error. Fixes: 8a46828e623c ("soc/tegra: Register SoC device") Reported-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> -
由 Thierry Reding 提交于
Commit 8a46828e623c ("soc/tegra: Register SoC device") added an initcall to register the SoC device on Tegra. However, that code is unrestricted and will run on all platforms, causing unwanted warnings. Fix this by first checking that we're running on hardware that supports the fuses block that we use to provide SoC information. Fixes: 8a46828e623c ("soc/tegra: Register SoC device") Reported-by: NSudeep Holla <sudeep.holla@arm.com> Tested-by: NSudeep Holla <sudeep.holla@arm.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 21 8月, 2017 1 次提交
-
-
由 Arnd Bergmann 提交于
Merge tag 'sunxi-drivers-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers Pull "Allwinner driver changes for 4.14" from Chen-Yu Tsai: Usual driver changes: - SUNXI_RSB bus driver enabled by default for ARM64 - Support for SRAM controller and SRAM C block on the A64 added * tag 'sunxi-drivers-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64
-
- 19 8月, 2017 4 次提交
-
-
git://git.pengutronix.de/git/pza/linux由 Arnd Bergmann 提交于
Pull "Reset controller changes for v4.14" from Philipp Zabel: - constify zx2967 reset_ops - add a convenience API to manage an array of resets - let deassert report success and let assert report success for shared resets if the reset controller driver does not implement (de)assert. - add HSDKv1 reset driver - remove Gemini reset controller, the driver is made obsolete by a combined clock/reset driver in drivers/clk - fix the total number of reset lines in the sunxi driver - various uniphier updates and fixes: - remove sLD3 SoC support - simplify system reset register and bit definitions - add audio systems, video input subsystem, and analog amplifiers reset controls * tag 'reset-for-4.14' of git://git.pengutronix.de/git/pza/linux: reset: uniphier: add analog amplifiers reset control reset: uniphier: add video input subsystem reset control reset: uniphier: add audio systems reset control reset: sunxi: fix number of reset lines reset: uniphier: do not use per-SoC macro for system reset block reset: uniphier: remove sLD3 SoC support Revert "reset: Add a Gemini reset controller" ARC: reset: introduce HSDKv1 reset driver reset: make (de)assert report success for self-deasserting reset drivers reset: Add APIs to manage array of resets reset: zx2967: constify zx2967_reset_ops. -
由 Arnd Bergmann 提交于
Merge tag 'tegra-for-4.14-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Pull "firmare: Changes for v4.14-rc1" from Thierry Reding: This contains a single bug fix that can lead to a crash in some rare situations. Since this has never been reported to happen with the level of support that exists upstream, this isn't considered critical. * tag 'tegra-for-4.14-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: firmware: tegra: set drvdata earlier
-
由 Arnd Bergmann 提交于
Merge tag 'tegra-for-4.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Pull "soc/tegra: Changes for v4.14-rc1" from Thierry Reding: Contains a fix for unbalanced reference counting of device tree nodes in the PMC-based generic power domains code. A second change moves the SoC device registration code from its old location in arch/arm/mach-tegra to drivers/soc/tegra so that it can be shared between 32-bit and 64-bit ARM Tegra SoCs. * tag 'tegra-for-4.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: Register SoC device soc/tegra: Fix bad of_node_put() in powergate init
-
https://github.com/mbgg/linux-mediatek由 Arnd Bergmann 提交于
Pull "arm: mediatek: soc updates for v4.14" from Matthias Brugger: - add mt7623a smp support - scpsys: reduce code duplication - scpsys: add mt7622 support - pmic wrapper: make of_device_ids constant * tag 'v4.13-next-soc' of https://github.com/mbgg/linux-mediatek: soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC soc: mtk-pmic-wrap: make of_device_ids const. ARM: mediatek: add MT7623a smp bringup code
-
- 18 8月, 2017 5 次提交
-
-
由 Icenowy Zheng 提交于
Allwinner A64's display engine claims the SRAM C section to work. Add support for the A64 SRAM controller and the SRAM C section of it. Signed-off-by: NIcenowy Zheng <icenowy@aosc.io> Signed-off-by: NChen-Yu Tsai <wens@csie.org>
-
由 Icenowy Zheng 提交于
On some Allwinner SoCs, sometimes the value needed to write into the register to claim SRAM is not equal to the value specified in the device tree. The device tree binding defines 0 as "mapped to CPU" and 1 as "mapped to X device". This matches the value written to the configuration register for the SRAM blocks currently supported. However, the not yet supported VE SRAM block is claimed for the device by writing 0x7fffffff, which is vastly different from the other blocks. On the A64, SRAM C is claimed by the device by writing a 0, which is the opposite of the current design. Add a value remapping in sunxi_sram_func structure, and let the sunxi_sram_of_parse function set the remapped register value. This allows us to keep the convention currently used in the device tree binding. Signed-off-by: NIcenowy Zheng <icenowy@aosc.io> [wens@csie.org: Clarified commit message] Signed-off-by: NChen-Yu Tsai <wens@csie.org>
-
由 Icenowy Zheng 提交于
When claiming SRAM, if the base is set to an error, it means that the SRAM controller has been probed, but failed to remap the controller memory zone. If the base is zero, thus the SRAM controller should be not probed at all, and it should return -EPROBE_DEFER. However, currently we returned -EPROBE_DEFER in the former situation, and ignored the latter situation (which will lead to the kernel to panic). Fix the behavior on abnormal base address processing when claiming. Signed-off-by: NIcenowy Zheng <icenowy@aosc.io> Fixes: 4af34b57 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs") Signed-off-by: NChen-Yu Tsai <wens@csie.org>
-
由 Icenowy Zheng 提交于
The display engine on Allwinner A64 wants to claim the SRAM C section. Add a SRAM controller compatible for A64, and a SRAM section compatible for its SRAM C. Signed-off-by: NIcenowy Zheng <icenowy@aosc.io> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NChen-Yu Tsai <wens@csie.org>
-
由 Jagan Teki 提交于
Allwinner's A64 SoC uses the "Reduced Serial Bus" to communicate with its companion PMIC. Since arm64 does not have separate defconfigs for each platform or processor family, enable this driver by default for ARM64 as well. Note that the Kconfig symbol already depends on ARCH_SUNXI. Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> [wens@csie.org: Refined commit message] Signed-off-by: NChen-Yu Tsai <wens@csie.org>
-
- 17 8月, 2017 9 次提交
-
-
由 Thierry Reding 提交于
Move this code from arch/arm/mach-tegra and make it common among 32-bit and 64-bit Tegra SoCs. This is slightly complicated by the fact that on 32-bit Tegra, the SoC device is used as the parent for all devices that are instantiated from device tree. Signed-off-by: NThierry Reding <treding@nvidia.com> -
由 Timo Alho 提交于
Subdevices of bpmp, such as bpmp-i2c, require the bpmp device's drvdata to be set during their probe. Currently this is not always the case. Fix this by calling platform_set_drvdata() earlier during bpmp's probe. Signed-off-by: NTimo Alho <talho@nvidia.com> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
由 Arnd Bergmann 提交于
Merge tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/drivers Pull "Amlogic driver updates for v4.14" from Kevin Hilman: - add SoC info driver * tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: soc: Add Amlogic SoC Information driver dt-bindings: arm: amlogic: Add SoC information bindings
-
由 Arnd Bergmann 提交于
Merge tag 'renesas-drivers-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Pull "Renesas ARM Based SoC Drivers Updates for v4.14" from Simon Horman: Add R-Car D3 (r8a77995) support to the Renesas-specific SoC drivers - SoC identification - System controller - Reset controller * tag 'renesas-drivers-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: rcar-rst: Add support for R-Car D3 soc: renesas: rcar-sysc: Add support for R-Car D3 power areas soc: renesas: Add r8a77995 SYSC PM Domain Binding Definitions soc: renesas: Identify R-Car D3
-
由 Arnd Bergmann 提交于
Merge tag 'qcom-drivers-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Pull "Qualcomm ARM Based Driver Updates for v4.14" from Andy Gross: * Minor fixes for SMSM and WCNSS_CTRL * Move Qcom SoC drivers to submenu * Fix mdt_loader to use request_firmware_into_buf() * tag 'qcom-drivers-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: soc: qcom: mdt_loader: Use request_firmware_into_buf() soc: qcom: bring all qcom drivers into a submenu soc: qcom: wcnss_ctrl: add missing MODULE_DEVICE_TABLE() soc: qcom: smsm: fix of_node refcnting problem
-
由 Arnd Bergmann 提交于
Merge tag 'v4.14-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers Pull "Rockchip driver changes for 4.14" from Heiko Stübner: Powerdomain support for rk3366 and disabling of the automatic jtag/sdmmc switching for rk3328. * tag 'v4.14-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: power-domain: add power domain support for rk3366 dt-bindings: add binding for rk3366 power domains dt-bindings: power: add RK3366 SoCs header for power-domain soc: rockchip: disable jtag switching for RK3328 Soc
-
由 Arnd Bergmann 提交于
Merge tag 'tee-drv-for-4.14' of http://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers Pull "Small fixes and enhancements for the TEE subsystem" from Jens Wiklander: * tag 'tee-drv-for-4.14' of http://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: sync with new naming of interrupts tee: indicate privileged dev in gen_caps tee: optee: interruptible RPC sleep tee: optee: add const to tee_driver_ops and tee_desc structures tee: tee_shm: Constify dma_buf_ops structures. tee: add forward declaration for struct device tee: optee: fix uninitialized symbol 'parg'
-
由 Rob Herring 提交于
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: NRob Herring <robh@kernel.org> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NRoger Quadros <rogerq@ti.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Rob Herring 提交于
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: NRob Herring <robh@kernel.org> Acked-by: NKrzysztof Kozlowski <krzk@kernel.org> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NMatthias Brugger <matthias.bgg@gmail.com> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Cc: Scott Wood <oss@buserror.net> Cc: Qiang Zhao <qiang.zhao@nxp.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 16 8月, 2017 2 次提交
-
-
由 Rob Herring 提交于
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: NRob Herring <robh@kernel.org> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Rob Herring 提交于
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: NRob Herring <robh@kernel.org> Acked-by: NSudeep Holla <sudeep.holla@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 14 8月, 2017 7 次提交
-
-
由 Sean Wang 提交于
Add SCPSYS power domain driver for MT7622 SoC having four power domains which are respectively ETHSYS for Ethernet including embedded switch, WBSYS for WIFI and Bluetooth, HIF0SYS for PCI-E and SATA, and HIF1SYS for USB. Those functions could be selectively powered gated when the corresponding function is no longer to use in order to reach more minimal power dissipation. Signed-off-by: NChen Zhong <chen.zhong@mediatek.com> Signed-off-by: NSean Wang <sean.wang@mediatek.com> Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
-
由 Chen Zhong 提交于
Add relevant header files required for dt-bindings of SCPSYS power domain control for all subsystems found on MT7622 SoC. Signed-off-by: NChen Zhong <chen.zhong@mediatek.com> Signed-off-by: NSean Wang <sean.wang@mediatek.com> Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
-
由 Sean Wang 提交于
Reduce code duplication of scpsys_probe_mtXXXX across all SoCs using the more generic scpsys_probe all covering all cases to avoid starting to bloat the driver when more MediaTek SoCs supported are added. Suggested-by: NMatthias Brugger <matthias.bgg@gmail.com> Signed-off-by: NSean Wang <sean.wang@mediatek.com> Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
-
由 Sean Wang 提交于
Update the binding document for enabling SCPSYS on MediaTek MT7622 SoC. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NChen Zhong <chen.zhong@mediatek.com> Acked-by: NRob Herring <robh@kernel.org> Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
-
由 Katsuhiro Suzuki 提交于
Add a reset line for analog signal amplifier core (ADAMV) on UniPhier LD11/LD20 SoCs. Signed-off-by: NKatsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Katsuhiro Suzuki 提交于
Add a reset line for video input subsystem (EXIV) on UniPhier LD11/LD20 SoCs. Signed-off-by: NKatsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Katsuhiro Suzuki 提交于
Add reset lines for audio subsystem (AIO) and SoC internal audio codec (EVEA) on UniPhier LD11/LD20 SoCs. Signed-off-by: NKatsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 11 8月, 2017 3 次提交
-
-
由 Philipp Zabel 提交于
The Allwinner reset controller has 32-bit registers, but resource_size is measured in bytes, not number of registers. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Acked-by: NChen-Yu Tsai <wens@csie.org>
-
由 Masahiro Yamada 提交于
This macro turned out not so useful as I had expected. Hardware engineers said they would change reset bit assignments for every SoC going forward. This means we can not share the macros among SoCs. Just use primitive macros. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Masahiro Yamada 提交于
This SoC is too old. It is difficult to maintain any longer. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 09 8月, 2017 4 次提交
-
-
由 Bjorn Andersson 提交于
By switching to the request_firmware_into_buf() we load the segment data straight into the preallocated buffers, reducing the need for allocating scratch buffers for these. In particular the modem firmware consists of multiple segments in the range 5-15MB, making this worth while. Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
由 Srinivas Kandagatla 提交于
As the number of qcom drivers increase, entries in SOC menu looks scattered with other SOC drivers. Make a submenu for Qcom drivers to make it visibly clear while selecting qcom SOC specific drivers. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
由 Rob Clark 提交于
This fixes a problem of wifi module not loading on db410c. Signed-off-by: NRob Clark <robdclark@gmail.com> Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
由 Rob Clark 提交于
of_find_node_with_property() drops the reference to the 'from' node, which eventually (after enough -EPROBE_DEFERs) drops the last reference to the node causing all sorts of fun problems, and this nice splat. BUG: sleeping function called from invalid context at ../kernel/locking/mutex.c:747 in_atomic(): 1, irqs_disabled(): 128, pid: 33, name: kworker/0:1 4 locks held by kworker/0:1/33: #0: ("events"){.+.+.+}, at: [<ffff0000080fa91c>] process_one_work+0x1a4/0x728 #1: (deferred_probe_work){+.+.+.}, at: [<ffff0000080fa91c>] process_one_work+0x1a4/0x728 #2: (&dev->mutex){......}, at: [<ffff000008676078>] __device_attach+0x30/0x168 #3: (devtree_lock){......}, at: [<ffff000008828fd0>] of_find_node_with_property+0x30/0xe0 irq event stamp: 18976 hardirqs last enabled at (18975): [<ffff00000815794c>] __down_trylock_console_sem+0x74/0xb8 hardirqs last disabled at (18976): [<ffff0000089e26d4>] _raw_spin_lock_irqsave+0x2c/0x78 softirqs last enabled at (16880): [<ffff0000080e0f00>] __do_softirq+0x580/0x640 softirqs last disabled at (16871): [<ffff0000080e13a4>] irq_exit+0xe4/0x138 CPU: 0 PID: 33 Comm: kworker/0:1 Tainted: G E 4.12.0-rc5+ #1455 Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc1-00234-g22fa70a-dirty 06/26/2017 Workqueue: events deferred_probe_work_func Call trace: [<ffff000008089ee0>] dump_backtrace+0x0/0x230 [<ffff00000808a134>] show_stack+0x24/0x30 [<ffff0000084e1944>] dump_stack+0xac/0xe8 [<ffff00000810d7e0>] ___might_sleep+0x150/0x230 [<ffff00000810d918>] __might_sleep+0x58/0x90 [<ffff0000089dde18>] __mutex_lock+0x50/0x870 [<ffff0000089de674>] mutex_lock_nested+0x3c/0x50 [<ffff000008388ae0>] kernfs_remove+0x30/0x50 [<ffff00000838b720>] sysfs_remove_dir+0x58/0x70 [<ffff0000084e393c>] kobject_del+0x1c/0x58 [<ffff0000084e374c>] kobject_put+0xb4/0x208 [<ffff00000882c364>] of_node_put+0x24/0x30 [<ffff000008829018>] of_find_node_with_property+0x78/0xe0 [<ffff000000aff5f4>] qcom_smsm_probe+0x194/0x720 [smsm] [<ffff0000086793b4>] platform_drv_probe+0x74/0x110 [<ffff0000086765bc>] driver_probe_device+0x2b4/0x420 [<ffff000008676920>] __device_attach_driver+0xd0/0x150 [<ffff000008673e78>] bus_for_each_drv+0x68/0xa8 [<ffff00000867611c>] __device_attach+0xd4/0x168 [<ffff000008676a1c>] device_initial_probe+0x24/0x30 [<ffff000008675380>] bus_probe_device+0xa0/0xa8 [<ffff000008675948>] deferred_probe_work_func+0xb8/0xf8 [<ffff0000080fa9d4>] process_one_work+0x25c/0x728 [<ffff0000080faef4>] worker_thread+0x54/0x3d8 [<ffff0000081031d8>] kthread+0x110/0x140 [<ffff000008082d90>] ret_from_fork+0x10/0x40 OF: ERROR: Bad of_node_put() on /smsm CPU: 0 PID: 33 Comm: kworker/0:1 Tainted: G W E 4.12.0-rc5+ #1455 Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc1-00234-g22fa70a-dirty 06/26/2017 Workqueue: events deferred_probe_work_func Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
- 07 8月, 2017 2 次提交
-
-
由 Linus Walleij 提交于
This reverts commit 2acb037f. We ended up merging the reset controller into the clock controller so we can now get rid of this stand-alone implementation. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Linus Torvalds 提交于
-