SH/R-Mobile fixes for 3.3-rc5

* tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh:
  arch/arm/mach-shmobile/board-ag5evm.c: included linux/dma-mapping.h twice
  ARM: mach-shmobile: r8a7779 PFC IPSR4 fix
  ARM: mach-shmobile: sh73a0 PSTR 32-bit access fix
  ARM: mach-shmobile: add GPIO-to-IRQ translation to sh7372
  ARM: mach-shmobile: clock-sh73a0: add DSIxPHY clock support
  arm: fix compile failure in mach-shmobile/board-ag5evm.c
  ARM: mach-shmobile: mackerel: add ak4642 amixer settings on comment
  ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd
  ARM: mach-shmobile: simplify MMCIF DMA configuration
  ARM: mach-shmobile: IRQ driven GPIO key support for Kota2
  ARM: mach-shmobile: sh73a0 IRQ sparse alloc fix
  ARM: mach-shmobile: sh73a0 PINT IRQ base fix

SuperH fixes for 3.3-rc5

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: Fix sh2a build error for CONFIG_CACHE_WRITETHROUGH
  sh: modify a resource of sh_eth_giga1_resources in board-sh7757lcr
  arch/sh: remove references to cpu_*_map.
  sh: Fix typo in pci-sh7780.c
  sh: add platform_device for SPI1 in setup-sh7757
  sh: modify resource for SPI0 in setup-sh7757
  sh: se7724: fix compile breakage
  sh: clkfwk: bugfix: use clk_reparent() for div6 clocks
  sh: clock-sh7724: fixup sh_fsi clock settings
  sh: sh7757lcr: update to the new MMCIF DMA configuration
  sh: fix the sh_mmcif_plat_data in board-sh7757lcr
  video: pvr2fb: Fix up spurious section mismatch warnings.
  sh: Defer to asm-generic/device.h.

There is an issue when memcg unregisters events that were attached to
the same eventfd:

- On the first call mem_cgroup_usage_unregister_event() removes all
  events attached to a given eventfd, and if there were no events left,
  thresholds->primary would become NULL;

- Since there were several events registered, cgroups core will call
  mem_cgroup_usage_unregister_event() again, but now kernel will oops,
  as the function doesn't expect that threshold->primary may be NULL.

That's a good question whether mem_cgroup_usage_unregister_event()
should actually remove all events in one go, but nowadays it can't
do any better as cftype->unregister_event callback doesn't pass
any private event-associated cookie. So, let's fix the issue by
simply checking for threshold->primary.

FWIW, w/o the patch the following oops may be observed:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
 IP: [<ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0
 Pid: 574, comm: kworker/0:2 Not tainted 3.3.0-rc4+ #9 Bochs Bochs
 RIP: 0010:[<ffffffff810be32c>]  [<ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0
 RSP: 0018:ffff88001d0b9d60  EFLAGS: 00010246
 Process kworker/0:2 (pid: 574, threadinfo ffff88001d0b8000, task ffff88001de91cc0)
 Call Trace:
  [<ffffffff8107092b>] cgroup_event_remove+0x2b/0x60
  [<ffffffff8103db94>] process_one_work+0x174/0x450
  [<ffffffff8103e413>] worker_thread+0x123/0x2d0

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

arch/arm/mach-shmobile/board-ag5evm.c: included 'linux/dma-mapping.h'
twice, remove the duplicate.
Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Fix the bit field width information for the IPSR4 register
in the r8a7779 pin function controller (PFC).

Without this fix the Marzen board fails to receive data
over the serial console due to misconfigured pin function
for the RX pin.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Tested-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Convert the sh73a0 SMP code to use 32-bit PSTR access.

This fixes wakeup from deep sleep for sh73a0 secondary CPUs.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The latest sh_eth driver needs a resource of TSU in the channel 1,
if the controller has TSU registers. So, this patch adds the resource.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This has been obsolescent for a while; time for the final push.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Correct spelling "erorr" to "error" in
arch/sh/drivers/pci/pci-sh7780.c
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

With kernel 3.1, Christoph removed i_alloc_sem and replaced it with
calls (namely inode_dio_wait() and inode_dio_done()) which are
EXPORT_SYMBOL_GPL() thus they cannot be used by non-GPL file systems and
further inode_dio_wait() was pushed from notify_change() into the file
system ->setattr() method but no non-GPL file system can make this call.

That means non-GPL file systems cannot exist any more unless they do not
use any VFS functionality related to reading/writing as far as I can
tell or at least as long as they want to implement direct i/o.

Both Linus and Al (and others) have said on LKML that this breakage of
the VFS API should not have happened and that the change was simply
missed as it was not documented in the change logs of the patches that
did those changes.

This patch changes the two function exports in question to be
EXPORT_SYMBOL() thus restoring the VFS API as it used to be - accessible
for all modules.

Christoph, who introduced the two functions and exported them GPL-only
is CC-ed on this patch to give him the opportunity to object to the
symbols being changed in this manner if he did indeed intend them to be
GPL-only and does not want them to become available to all modules.
Signed-off-by: NAnton Altaparmakov <anton@tuxera.com>
CC: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A fix from Jesper Juhl removes an assignment in an ASSERT when a compare
is intended.  Two fixes from Mitsuo Hayasaka address off-by-ones in XFS
quota enforcement.

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: make inode quota check more general
  xfs: change available ranges of softlimit and hardlimit in quota check
  XFS: xfs_trans_add_item() - don't assign in ASSERT() when compare is intended

BenH says:
 'Here are a few more powerpc bits for you.  A stupid regression I
  introduced with my previous commit to "fix" program check exceptions
  (brown paper bag for me), fix the cpuidle default, a bug fix for
  something that isn't strictly speaking a regression but some upstream
  changes causes it to show in lockdep now while it didn't before, and
  finally a trivial one for rusty to make his life easier later on
  removing the old cpumask cruft. '

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix various issues with return to userspace
  cpuidle: Default y on powerpc pSeries
  powerpc: Fix program check handling when lockdep is enabled
  powerpc: Remove references to cpu_*_map

sound fixes for 3.3-rc5

Just a collection of boring small fixes for ASoC, HD-audio Realtek
and USB-audio drivers.

* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: snd-usb-caiaq: Fix the return of XRUN
  ASoC: ak4642: fixup HeadPhone L/R dapm settings
  ALSA: hda/realtek - Fix surround output regression on Acer Aspire 5935
  ALSA: hda/realtek - Fix overflow of vol/sw check bitmap
  ALSA: usb-audio: avoid integer overflow in create_fixed_stream_quirk()
  ASoC: wm8962: Fix sidetone enumeration texts

USB bugfixes for 3.3-rc4

A number of new device ids, and a cleanup/fix for some of the option
device ids that shouldn't have been added in the first place.

There's also a few USB 3 fixes for problems that people have reported,
and a usb-storage bugfix to round it out.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

* tag 'usb-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: Added Kamstrup VID/PIDs to cp210x serial driver.
  USB: Serial: ti_usb_3410_5052: Add Abbot Diabetes Care cable id
  usb-storage: fix freezing of the scanning thread
  xhci: Fix encoding for HS bulk/control NAK rate.
  USB: Set hub depth after USB3 hub reset
  USB: Fix handoff when BIOS disables host PCI device.
  USB: option: cleanup zte 3g-dongle's pid in option.c
  USB: Don't fail USB3 probe on missing legacy PCI IRQ.
  xhci: Fix oops caused by more USB2 ports than USB3 ports.
  USB: Remove duplicate USB 3.0 hub feature #defines.

Intel, radeon, exynos fixes.

Intel: fixes a few Ivybridge hangs, along with fixing RC6 on SNB (still
not on, but at least allows for distros to patch it on easily).

radeon: oops reading some files in debugfs that weren't meant to appear,
a fix that touches a lot of files, so looks worse than it is, it fixes
an oops if a GPU reset fails and userspace keeps submitting more data,
along with a minor BIOS fix for newer boards.

exynos: a group of fixes for exynos, they've sent me a few more but
these were all I got through, and its no hw vanilla kernel users see a
lot off yet.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms/atom: dpms bios scratch reg updates
  drm/radeon/kms: properly set accel working flag and bailout when false
  drm/radeon: Only create additional ring debugfs files on Cayman or newer.
  drm/exynos: added postclose to release resource.
  drm/exynos: removed exynos_drm_fbdev_recreate function.
  drm/exynos: fixed page flip issue.
  drm/exynos: added possible_clones setup function.
  drm/exynos: removed pageflip_event_list init code when closed.
  drm/exynos: changed priority of mixer layers.
  drm/exynos: Fix typo in exynos_mixer.c
  drm/i915: do not enable RC6p on Sandy Bridge
  drm/i915: gen7: Disable the RHWO optimization as it can cause GPU hangs.
  drm/i915: gen7: work around a system hang on IVB
  drm/i915: gen7: Implement an L3 caching workaround.
  drm/i915: gen7: implement rczunit workaround

It contains 3 important fixes for ColdFire based machines:
 - fix processes getting stuck when running from strace
 - fix kernel vmalloced pages not being visible in all kernel contexts
 - fix shared user pages sometimes being visible in another process
   context

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: Do not set global share for non-kernel shared pages
  m68k: Add shared bit to Coldfire kernel page entries
  m68knommu: fix syscall tracing stuck process

Bugfixes for the NFS client.

Fix a nasty Oops in the NFSv4 getacl code, another source of infinite
loops in the NFSv4 state recovery code, and a regression in NFSv4.1
session initialisation.

Also deal with an NFSv4.1 memory leak.

* tag 'nfs-for-3.3-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: fix server_scope memory leak
  NFSv4.1: Fix a NFSv4.1 session initialisation regression
  NFSv4: Ensure we throw out bad delegation stateids on NFS4ERR_BAD_STATEID
  NFSv4: Fix an Oops in the NFSv4 getacl code

dpms bits not used on DCE4+
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If accel is not working many subsystem such as the ib pool might not be
initialized properly that can lead to segfault inside kernel when cs
ioctl is call with non working acceleration. To avoid this make sure
the accel working flag is false when an error in GPU startup happen and
return EBUSY from cs ioctl if accel is not working.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46274

Tested with a Cayman card in a Llano system: The additional files are created
and working for the Cayman card but not created for the CPU's built-in GPU.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel into drm-fixes

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel:
  drm/i915: do not enable RC6p on Sandy Bridge
  drm/i915: gen7: Disable the RHWO optimization as it can cause GPU hangs.
  drm/i915: gen7: work around a system hang on IVB
  drm/i915: gen7: Implement an L3 caching workaround.
  drm/i915: gen7: implement rczunit workaround

Commit 3702b082 added a lock, but did not account for the case of
SNDRV_PCM_POS_XRUN, which would get immediately overwritten.

This could be bundled into one if-else-if statement, but the goto
helps to clarify the 'exceptional' case.

Thanks to Andreas Pape for spotting this.
Signed-off-by: NMark Hills <mark@pogo.org.uk>
Acked-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We have a few problems when returning to userspace. This is a
quick set of fixes for 3.3, I'll look into a more comprehensive
rework for 3.4. This fixes:

 - We kept interrupts soft-disabled when schedule'ing or calling
do_signal when returning to userspace as a result of a hardware
interrupt.

 - Rename do_signal to do_notify_resume like all other archs (and
do_signal_pending back to do_signal, which it was before Roland
changed it).

 - Add the missing call to key_replace_session_keyring() to
do_notify_resume().
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
---

We moved all our pSeries idle loops to the cpu idle framework
so we really want it to come up by default.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In commit 54321242 ("Disable interrupts early in Program Check"), we
switched from enabling to disabling interrupts in program_check_common.

Whereas ENABLE_INTS leaves r3 untouched, if lockdep is enabled DISABLE_INTS
calls into lockdep code and will clobber r3. That means we pass a bogus
struct pt_regs* into program_check_exception() and all hell breaks loose.

So load our regs pointer into r3 after we call DISABLE_INTS.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This has been obsolescent for a while; time for the final push.

In adjacent context, replaced old cpus_* with cpumask_*.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  maintainers: update my email address

A few more things this time around.  The only thing warranting some
commentry is the modpost change, which allows folk building a Thumb2
enabled kernel to see section mismatch warnings.  This is why many
weren't noticed with OMAP.

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM/audit: include audit header and fix audit arch
  ARM: OMAP: fix voltage domain build errors with PM_OPP disabled
  ARM/PCI: Remove ARM's duplicate definition of 'pcibios_max_latency'
  ARM: 7336/1: smp_twd: Don't register CPUFREQ notifiers if local timers are not initialised
  ARM: 7327/1: need to include asm/system.h in asm/processor.h
  ARM: 7326/2: PL330: fix null pointer dereference in pl330_chan_ctrl()
  ARM: 7164/3: PL330: Fix the size of the dst_cache_ctrl field
  ARM: 7325/1: fix v7 boot with lockdep enabled
  ARM: 7324/1: modpost: Fix section warnings for ARM for many compilers
  ARM: 7323/1: Do not allow ARM_LPAE on pre-ARMv7 architectures

Update my email address.
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

The 'poll()' system call timeout parameter is supposed to be 'int', not
'long'.

Now, the reason this matters is that right now 32-bit compat mode is
broken on at least x86-64, because the 32-bit code just calls
'sys_poll()' directly on x86-64, and the 32-bit argument will have been
zero-extended, turning a signed 'int' into a large unsigned 'long'
value.

We could just introduce a 'compat_sys_poll()' function for this, and
that may eventually be what we have to do, but since the actual standard
poll() semantics is *supposed* to be 'int', and since at least on x86-64
glibc sign-extends the argument before invocing the system call (so
nobody can actually use a 64-bit timeout value in user space _anyway_,
even in 64-bit binaries), the simpler solution would seem to be to just
fix the definition of the system call to match what it should have been
from the very start.

If it turns out that somebody somehow circumvents the user-level libc
64-bit sign extension and actually uses a large unsigned 64-bit timeout
despite that not being how poll() is supposed to work, we will need to
do the compat_sys_poll() approach.
Reported-by: NThomas Meyer <thomas@m3y3r.de>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This provides unified readq()/writeq() helper functions for 32-bit
drivers.

For some cases, readq/writeq without atomicity is harmful, and order of
io access has to be specified explicitly.  So in this patch, new two
header files which contain non-atomic readq/writeq are added.

 - <asm-generic/io-64-nonatomic-lo-hi.h> provides non-atomic readq/
   writeq with the order of lower address -> higher address

 - <asm-generic/io-64-nonatomic-hi-lo.h> provides non-atomic readq/
   writeq with reversed order

This allows us to remove some readq()s that were added drivers when the
default non-atomic ones were removed in commit dbee8a0a ("x86:
remove 32-bit versions of readq()/writeq()")

The drivers which need readq/writeq but can do with the non-atomic ones
must add the line:

  #include <asm-generic/io-64-nonatomic-lo-hi.h> /* or hi-lo.h */

But this will be nop in 64-bit environments, and no other #ifdefs are
required.  So I believe that this patch can solve the problem of
 1. driver-specific readq/writeq
 2. atomicity and order of io access

This patch is tested with building allyesconfig and allmodconfig as
ARCH=x86 and ARCH=i386 on top of tip/master.

Cc: Kashyap Desai <Kashyap.Desai@lsi.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NHitoshi Mitake <h.mitake@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NBruno Thomsen <bruno.thomsen@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This USB-serial cable with mini stereo jack enumerates as:
Bus 001 Device 004: ID 1a61:3410 Abbott Diabetes Care

It is a TI3410 inside.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1521b) fixes the interaction between usb-storage's
scanning thread and the freezer.  The current implementation has a
race: If the device is unplugged shortly after being plugged in and
just as a system sleep begins, the scanning thread may get frozen
before the khubd task.  Khubd won't be able to freeze until the
disconnect processing is complete, and the disconnect processing can't
proceed until the scanning thread finishes, so the sleep transition
will fail.

The implementation in the 3.2 kernel suffers from an additional
problem.  There the scanning thread calls set_freezable_with_signal(),
and the signals sent by the freezer will mess up the thread's I/O
delays, which are all interruptible.

The solution to both problems is the same: Replace the kernel thread
used for scanning with a delayed-work routine on the system freezable
work queue.  Freezable work queues have the nice property that you can
cancel a work item even while the work queue is frozen, and no signals
are needed.

The 3.2 version of this patch solves the problem in Bugzilla #42730.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NSeth Forshee <seth.forshee@canonical.com>
CC: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'for-usb-linus-2012-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus

Hi Greg,

Here's three bug fixes that should be queued for 3.3.

The first fixes an issue we saw with an Intel Panther Point xHCI host,
where a certain OSV's custom BIOS would disable the PCI device during
boot.  It changes the generic PCI quirks handler for all USB host
controllers, but in a way both Jesse Barnes and Oliver Neukum have
agreed is safe.

The second patch is Elric Fu's first kernel patch!  Congrats!  It fixes
a bug in the USB 3.0 hub reset handling.

The last patch fixes a bug in the xHCI driver that feeds invalid input
to the xHC host.  Only the VIA host controller seems to have issues with
it.  Thanks to Felipe Contreras for testing this patch on his VIA host,
and Andiry Xu for suggesting the fix.

All three patches are marked for stable.

Sarah Sharp

The xHCI 0.96 spec says that HS bulk and control endpoint NAK rate must
be encoded as an exponent of two number of microframes.  The endpoint
descriptor has the NAK rate encoded in number of microframes.  We were
just copying the value from the endpoint descriptor into the endpoint
context interval field, which was not correct.  This lead to the VIA
host rejecting the add of a bulk OUT endpoint from any USB 2.0 mass
storage device.

The fix is to use the correct encoding.  Refactor the code to convert
number of frames to an exponential number of microframes, and make sure
we convert the number of microframes in HS bulk and control endpoints to
an exponent.

This should be back ported to kernels as old as 2.6.31, that contain the
commit dfa49c4a "USB: xhci - fix math
in xhci_get_endpoint_interval"
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: NFelipe Contreras <felipe.contreras@gmail.com>
Suggested-by: NAndiry Xu <andiry.xu@amd.com>
Cc: stable@vger.kernel.org

The superspeed device attached to a USB 3.0 hub(such as VIA's)
doesn't respond the address device command after resume. The
root cause is the superspeed hub will miss the Hub Depth value
that is used as an offset into the route string to locate the
bits it uses to determine the downstream port number after
reset, and all packets can't be routed to the device attached
to the superspeed hub.

Hub driver sends a Set Hub Depth request to the superspeed hub
except for USB 3.0 root hub when the hub is initialized and
doesn't send the request again after reset due to the resume
process. So moving the code that sends the Set Hub Depth request
to the superspeed hub from hub_configure() to hub_activate()
is to cover those situations include initialization and reset.

The patch should be backported to kernels as old as 2.6.39.
Signed-off-by: NElric Fu <elricfu1@gmail.com>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org

On some systems with an Intel Panther Point xHCI host controller, the
BIOS disables the xHCI PCI device during boot, and switches the xHCI
ports over to EHCI.  This allows the BIOS to access USB devices without
having xHCI support.

The downside is that the xHCI BIOS handoff mechanism will fail because
memory mapped I/O is not enabled for the disabled PCI device.
Jesse Barnes says this is expected behavior.  The PCI core will enable
BARs before quirks run, but it will leave it in an undefined state, and
it may not have memory mapped I/O enabled.

Make the generic USB quirk handler call pci_enable_device() to re-enable
MMIO, and call pci_disable_device() once the host-specific BIOS handoff
is finished.  This will balance the ref counts in the PCI core.  When
the PCI probe function is called, usb_hcd_pci_probe() will call
pci_enable_device() again.

This should be back ported to kernels as old as 2.6.31.  That was the
first kernel with xHCI support, and no one has complained about BIOS
handoffs failing due to memory mapped I/O being disabled on other hosts
(EHCI, UHCI, or OHCI).
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: NOliver Neukum <oneukum@suse.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org