The hda_bus ops callback take struct hda_bus pointer.
Also, the command callback takes the composed command word, instead of
each small bits in arguments.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current snd-hda-intel driver seems blocking the power-off on some
devices like eeepc.  Although this is likely a BIOS problem, we can add
a workaround by disabling IRQ lines before power-off operation.
This patch adds the reboot notifier to achieve it.

The detailed problem description is found in bug#11889:
    http://bugme.linux-foundation.org/show_bug.cgi?id=11889Tested-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Cc: stable@kernel.org
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Removed the old workaround to avoid the non-existing codec slot.
The current code should work without that workaround.  If any,
we can add a quirk table.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the infrastructure for dynamic stream allocation on HD-audio.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When read RIRB buffer immediately after RIRB interrupt received,
sometimes the data will be "0x0". If we wait for some time, the data
in buffer will be correct. This issue only occurred with AMD Phenom cpu.
So we set this "needs_damn_long_delay" flag.
Signed-off-by: NWei Ni <wni@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Allow probing of 4 codecs on known good situations.
On some known bad situations, it should be avoided.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Add a workaround for bad DMA-position reporting on VIA chipset.
Signed-off-by: NJoseph Chan <josephchan@via.com.tw>
[modified and cleaned up by tiwai]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Check the continuity of allocated pages to reduce the BDL size as much
as possible so that it can use more than 1MB buffers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Clean up SG-buffer helper functions and macros.  Helpers take substream
as arguments now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

When bdl_pos_adj=0 is given, disable the position-check and the delayed
period update mechanism.  Usually bdl_pos_adj=0 is set only for the
debugging purpose on really broken hardwares.  It's better to disable
the extra complexity in such a case.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Kill snd_assert() in sound/pci/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Enable the snoop for nvidia hda controller to avoid data coherence issue.
Signed-off-by: NPeer Chen <peerchen@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLibin Yang <libin.yang@amd.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the Intel Ibex Peak (PCH) HD Audio Controller DeviceIDs.

Signed-off by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It seems NVidia and other hardwares require the alignment for period
update timing.  For satisfying this condition, align the position
adjustment for delayed wake-up to the initial bdl_pos_adj value.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use the standard upper_32_bits() instead of own macro.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use bdl_pos_adj=32 as default except for Intel hardwares confirmed
to work with bdl_pos_adj=1.  Looks like ATI and NVidia require this
higher value.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The pending IRQ handling is a very hackish workaround and should be
avoided as much as possible via a larger bdl_pos_adj option value.
Put a warning message if this situation occurs so that the user may have
a chance to notice that something is wrong.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

ATI SB controllers seem to report the DMA ahead in the amount of FIFO.
Thus bdl_pos_adj should be 32 for them as default.

Also, the default value is set to -1, which means to make the driver
to choose the appropriate value.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The option bdl_pos_adj should be provided for each card instance instead of
a global one because the value depends rather on each controller-chip.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

position_fix=3 is the option to correct the DMA position with the
FIFO size.  But, it never worked correctly, and we have now more other
workarounds for the DMA position fixes.  Thus better to remove it.

Also, change POS_FIX_NONE to POS_FIX_LPIB to represent its real role
better.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added a new option, bdl_pos_adj, to adjust the delay of IRQ-wakeup
timing.

Most HD-audio hardwares have a problem that a BDL IRQ is issued before
actually the data and the DMA pointer are updated.
We have already a mechanism to force to delay snd_pcm_period_elapsed()
calls via workq, but this costs much CPU, and typically the delay is
within one sample.  Thus, it's more clever to adjust the BDL entries
instead.

The new option adds the size of the delay in frames.  As default,
it's set to 1 -- that is, one sample delay.  Even the hardware is
really correct, one sample delay is relatively harmless in comparison
with reporting wrong positions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

It turned out that some ICH9-based boards use SD3 for the audio codec
where the current driver code doesn't probe.  Since we have a better
codec slot check now, it must be safe to increase this to 4.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the missing PCI ID for ICH9 controller (8086:2911)
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the new PCI ID 0x6549 0x1200 Teradici controller.
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Many HD-audio controllers seem inaccurate about the IRQ timing of
PCM period updates.  This has caused problems on audio quality; e.g.
JACK doesn't work with two periods.

This patch fixes the problem by checking the current DMA position
at IRQ handler and delays the period-update via a workq if it's
inaccurate.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

free_irq() calls synchronize_irq() for you, so there is no need for
drivers to manually do the same thing (again).  Thus, calls where
sync-irq immediately precedes free-irq can be simplified.

However, during this audit several bugs were noticed, where free-irq is
preceded by a "irq >= 0" check... but the sync-irq call is not covered
by the same check.

So, where sync-irq could not be eliminated completely, the missing check
was added.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Addded the support of sync streams to hda-intel driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add proper barriers in the RIRB communication code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The hda-intel driver has a problem at power-off on ASUS P5AD2.
It's caused when the position-buffer is enabled -- most likely a
hardware-specific problem.

This patch adds a quirk to avoid the unnecessary enablement of
position-buffer.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the Device IDs of nvidia MCP79 HD audio controller to hda_intel.c
Signed-off-by: NPeer Chen <peerchen@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sparc32:

sound/pci/hda/hda_intel.c: In function 'azx_create':
sound/pci/hda/hda_intel.c:1838: error: 'DMA_64BIT_MASK' undeclared (first use in this function)
sound/pci/hda/hda_intel.c:1838: error: (Each undeclared identifier is reported only once
sound/pci/hda/hda_intel.c:1838: error: for each function it appears in.)
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clean up the pci id table using PCI_DEVICE() macro.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clean up the code to define playback/capture streams.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch is to add R7xx HDMI audio support.
Signed-off-by: NLibin Yang <Libin.yang@amd.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Forgot to get rid of the obsolete fragsize field from a debug print.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The HD-audio hardware usually supports 64bit address for DMA and other
buffers.  The patch enables the feature if supported.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use SG buffers for the HD-audio instead of linear buffers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the current scheme, PCM device numbers are assigned incrementally
in the order of codecs.  This causes problems when the codec number
is irregular, e.g. codec #0 for HDMI and codec #1 for analog.  Then
the HDMI becomes the first PCM, which is picked up as the default
output device.  Unfortuantely this doesn't work well with normal
setups.

This patch introduced the fixed device numbers for the PCM types,
namely, analog, SPDIF, HDMI and modem.  The PCM devices are assigned
according to the corresponding PCM type.  After this patch, HDMI will
be always assigned to PCM #3, SPDIF to PCM #1, and the first analog
to PCM #0, etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver gets Oops with ATI HDMI devices due to the wrong calculation
of index for playback streams.  This patch fixes it.  Reference:
	https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3746Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>