Some DS13XX devices have "trickle chargers".  Introduce a device tree
binding for specifying the trickle charger configuration for ds1339.

Only ds1339 dt binding is supported because this is the only chip I have.
I _assume_ the code would have worked on other allready supported chips.
However I cannot check the resistor values for the other chips or test
them.  For other chips the driver code works as earlier Eg.  it does not
check the dt bindings at all
Signed-off-by: NMatti Vaittinen <matti.vaittinen@nsn.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pavel Machek <pavel@denx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the initial version of the RK808 PMIC.  This is a power management
IC for multimedia products.  It provides regulators that are able to
supply power to processor cores and other components.  The chip provides
other modules including RTC, Clockout.

Add RTC driver for supporting RTC device present inside RK808 PMIC.

[akpm@linux-foundation.org: make tm_def static]
Signed-off-by: NChris Zhong <zyw@rock-chips.com>
Signed-off-by: NZhang Qing <zhangqing@rock-chips.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Tested-by: NDoug Anderson <dianders@chromium.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Samuel Ortiz <sameo@linux.intel.com> says:
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Olof Johansson <olof@lixom.net>
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

of_device_ids (i.e. compatible strings and the respective data) are not
supposed to change at runtime.  All functions working with of_device_ids
provided by <linux/of.h> work with const of_device_ids.  This allows to
mark all struct of_device_id below drivers/rtc const, too.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for RTC of Exynos3250 SoC.  The Exynos3250 needs source
clock(32.768KHz) for RTC block.  If source clock of RTC is registerd on
clock list of common clk framework, Exynos RTC drvier have to control
this clock.

Clock list for s3c-rtc device:
- rtc : CLK_RTC of CLK_GATE_IP_PERIR is gate clock for RTC.
- rtc_src : XrtcXTI is 32.768.kHz source clock for RTC.
 (XRTCXTI: Specifies a clock from 32.768 kHz crystal pad with XRTCXTI and
 XRTCXTO pins. RTC uses this clock as the source of a real-time clock.)
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add s3c_rtc_data structure to variant data according to SoC type.  The
s3c_rtc_data structure includes some functions to control RTC operation
and specific data dependent on SoC type.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove warning message when checking codeing style with checkpatch script
and reduce un-necessary i2c read operation on s3c_rtc_enable.

    WARNING: line over 80 characters
    #406: FILE: drivers/rtc/rtc-s3c.c:406:
    +		if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0) {

    WARNING: line over 80 characters
    #414: FILE: drivers/rtc/rtc-s3c.c:414:
    +		if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)) {

    WARNING: line over 80 characters
    #422: FILE: drivers/rtc/rtc-s3c.c:422:
    +		if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)) {

    WARNING: Missing a blank line after declarations
    #451: FILE: drivers/rtc/rtc-s3c.c:451:
    +	struct s3c_rtc_drv_data *data;
    +	if (pdev->dev.of_node) {

    WARNING: Missing a blank line after declarations
    #453: FILE: drivers/rtc/rtc-s3c.c:453:
    +		const struct of_device_id *match;
    +		match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node);

    WARNING: DT compatible string "samsung,s3c2416-rtc" appears un-documented -- check ./Documentation/devicetree/bindings/
    #650: FILE: drivers/rtc/rtc-s3c.c:650:
    +		.compatible = "samsung,s3c2416-rtc",

    WARNING: DT compatible string "samsung,s3c2443-rtc" appears un-documented -- check ./Documentation/devicetree/bindings/
    #653: FILE: drivers/rtc/rtc-s3c.c:653:
    +		.compatible = "samsung,s3c2443-rtc",
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Define s3c_rtc structure including necessary variables for S3C RTC device
instead of global variables.  This patch improves the readability by
removing global variables.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use c99 initializers for structures.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@decl@
identifier i1,fld;
type T;
field list[n] fs;
@@

struct i1 {
 fs
 T fld;
 ...};

@bad@
identifier decl.i1,i2;
expression e;
initializer list[decl.n] is;
@@

struct i1 i2 = { is,
+ .fld = e
- e
 ,...};
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Without proper alias kernel module is not loaded for rtc-efi driver.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Cc: dann frazier <dannf@dannf.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that we have Kconfig options for individual sunxi platforms, let
the rtc-sunxi driver depend on the platforms that actually have this
hardware, sun4i and sun7i.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

This patch introduces the driver for the RTC in the Allwinner A31 and
A23 SoCs.

Unlike the RTC found in A10/A20 SoCs, which was part of the timer, the
RTC in A31/A23 are a separate hardware block, which also contain a few
controls for the RTC block hardware (a regulator and RTC block GPIO pin
latches), while also having separate interrupts for the alarms.

The hardware is different enough to make a different driver for it.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Reviewed-by: NVarka Bhadram <varkabhadram@gmail.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu.
ARCH_MVEBU is sufficient.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com
Link: https://lkml.kernel.org/r/1409417172-6846-6-git-send-email-andrew@lunn.chSigned-off-by: NJason Cooper <jason@lakedaemon.net>

The rtc-s5m driver used to support devices without irq specified in the
past.  Re-add this support.

The patch fixes boot for Insignal's Exynos4412 based Origen board.

Error messages before the patch:

  ...
  Unable to handle kernel NULL pointer dereference at virtual address 00000094
  pgd = c0004000
  [00000094] *pgd=00000000
  Internal error: Oops: 5 [#1] PREEMPT SMP ARM
  Modules linked in:
  CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-next-20140804-00008-ga59480f-dirty #701
  task: ea80f000 ti: ea882000 task.ti: ea882000
  PC is at regmap_irq_get_virq+0x0/0x28
  LR is at s5m_rtc_probe+0xdc/0x310
  pc : [<c02574fc>]    lr : [<c02de75c>]    psr: 80000153
  sp : ea883e48  ip : 00000000  fp : 00000000
  r10: 0000000c  r9 : c05de7ac  r8 : eaabc600
  r7 : eaa6b4d0  r6 : c0439e8c  r5 : eaabc610  r4 : eab30e50
  r3 : 00000000  r2 : 00000000  r1 : 0000000c  r0 : 00000000
  Flags: Nzcv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
  Control: 10c5387d  Table: 4000404a  DAC: 00000015
  Process swapper/0 (pid: 1, stack limit = 0xea882240)
  Backtrace:
    regmap_irq_get_virq
    s5m_rtc_probe
    platform_drv_probe
    driver_probe_device
    __driver_attach
    bus_for_each_dev
    bus_add_driver
    driver_register
    do_one_initcall
    kernel_init_freeable
    kernel_init
  ---[ end trace a954d7f019122700 ]---
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  ...
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The interrupt handler gets the driver data associated with the RTC
device and doesn't check it for validity.  This can cause a NULL pointer
being dereferenced when and interrupt fires before the driver data was
properly set up.

Fix this by setting the driver data earlier (before the interrupt is
requested).
Signed-off-by: NThierry Reding <treding@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In rtc_suspend() and rtc_resume(), the error after rtc_read_time() is not
checked.  If rtc device fail to read time, we cannot guarantee the
following process.

Add the verification code for returned rtc_read_time() error.
Signed-off-by: NHyogi Gim <hyogi.gim@lge.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the pcf85063 rtc chip.

[akpm@linux-foundation.org: fix comment typo, tweak conding style]
Signed-off-by: NSoeren Andersen <san@rosetechnology.dk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for configuring the ISL12022 real-time clock via the Device
tree framework.  This is based on what I've seen in the related ISL12057
driver, it has been tested and works on a Technologic Systems TS-7670
device which uses a ISL12020 RTC device, my device tree looks like this:

	apbx@80040000 {
		i2c0: i2c@80058000 {
			pinctrl-names = "default";
			pinctrl-0 = <&i2c0_pins_a>;
			clock-frequency = <400000>;
			status = "okay";

			isl12022@0x6f {
				compatible = "isl,isl12022";
				reg = <0x6f>;
			};
		};
		... etc
	};
Signed-off-by: NStuart Longland <stuartl@vrt.com.au>
Cc: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds alarm support for the NXP PCF8563 chip.
Signed-off-by: NVincent Donnefort <vdonnefort@gmail.com>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This functions allow to factorize I2C I/O operations.
Signed-off-by: NVincent Donnefort <vdonnefort@gmail.com>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, the rtc-efi driver is restricted to ia64 only.  Newer
architectures with EFI support may want to also use that driver.  This
patch moves the platform device setup from ia64 into drivers/rtc and
allow any architecture with CONFIG_EFI=y to use the rtc-efi driver.
Signed-off-by: NMark Salter <msalter@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In __rtc_set_alarm(), the error after __rtc_read_time() is not checked.
If rtc device fail to read time, we cannot guarantee the following
process.

Add the verification code for returned __rtc_read_time() error.
Signed-off-by: NHyogi Gim <hyogi.gim@lge.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In particular seeing zero in eft->month is problematic, as it results in
-1 (converted to unsigned int, i.e.  yielding 0xffffffff) getting passed
to rtc_year_days(), where the value gets used as an array index
(normally resulting in a crash).  This was observed with the driver
enabled on x86 on some Fujitsu system (with possibly not up to date
firmware, but anyway).

Perhaps efi_read_alarm() should not fail if neither enabled nor pending
are set, but the returned time is invalid?
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Reported-by: NRaymund Will <rw@suse.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jingoo Han <jg1.han@samsung.com>
Acked-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 5516f097 ("drivers/rtc/rtc-ds1742.c: remove redundant
of_match_ptr() helper") has description as: "'ds1742_rtc_of_match' is
always compiled in.  Hence the helper macro is not needed".

It is not true, of_match_ptr() macro makes of_device_id parameter unused
and this constant is declared with __maybe_unused attribute, so normally
this variable should be discarded by linker.  This patch revers this
commit, since there are no reason to compile of_device_id constant for
non-DT systems.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The rtc-moxart driver is only useful on MOXA ART systems so it should
depend on ARCH_MOXART as all other MOXA ART drivers already do.  Add
COMPILE_TEST as an alternative to allow for build testing on other
systems.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the DS2404 entry together with the other Dallas entries, and add
Maxim so that it looks nicer (and more correct, too.)
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Sven Schnelle <svens@stackframe.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a patch to add support of nvram for maxim dallas rtc ds1343.
Signed-off-by: NRaghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch changes all absolute SYS_XY registers to offsets from the
SYS block base, prefixes them with AU1000 to avoid silent failures due
to changed addresses, and introduces helper functions to read/write
them.

No functional changes, comparing assembly of a few select functions shows
no differences.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7464/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add register definitions for DA9063 AD (0x3) silicon variant ID
the ability to choose the silicon variant at run-time using regmap
configuration. This patch also adds RTC support for the AD silicon
changes.

It adds both BB and AD support as regmap ranges and then makes the
distinction between the two tables at run-time. This allows both AD
and BB silicon variants to be supported at the same time.
Suggested-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NOpensource [Steve Twiss] <stwiss.opensource@diasemi.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

By using the generic IRQ support in the Register map API, it
is possible to get rid max77686-irq.c and simplify the code.
Suggested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Tested-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

It is only a typo issue, the related commit:

  "1fbc4c4d drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()"

The related error (for unicore32 with allmodconfig):

    CC [M]  drivers/rtc/rtc-puv3.o
  drivers/rtc/rtc-puv3.c: In function 'puv3_rtc_setalarm':
  drivers/rtc/rtc-puv3.c:143: error: 'struct device' has no member named 'dev'
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Acked-by: NXuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: NXuetao Guan <gxt@mprc.pku.edu.cn>

It is only a typo issue, the related commit:

  "1fbc4c4d drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()"

The related error (unicore32 with allmodconfig):

    CC [M]  drivers/rtc/rtc-puv3.o
  drivers/rtc/rtc-puv3.c: In function 'puv3_rtc_setpie':
  drivers/rtc/rtc-puv3.c:74: error: implicit declaration of function 'dev_debug'
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Acked-by: NXuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: NXuetao Guan <gxt@mprc.pku.edu.cn>

In probe the configuration of driver for different chipsets was done in
two switch (pdata->device_type) statements.  Consolidate them into one
switch statement to increase code readability.

Additionally check the return value of regmap_irq_get_virq and exit
probe on error.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for S2MPS14 to the rtc-s5m driver.  Differences in S2MPS14
(in comparison to S5M8767):

 - Layout of registers
 - Lack of century support for time and alarms (7 registers used for
   storing time/alarm)
 - Two buffer control registers: WUDR and RUDR
 - No register for enabling writing time
 - RTC interrupts are reported in main PMIC I2C device
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver:

1. Add a map of registers used by the driver which differ between
   the chipsets (S5M876X and S2MPS14).

2. Move code of checking for alarm pending to separate function.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Set the time needed for updating alarm and time registers to 0.45 ms.
The default is 7.32 ms which is too long and leads to warnings when
setting alarm or time:

	s5m-rtc: waiting for UDR update, reached max number of retries
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the code for initializing time if this is first boot.

The code for detecting first boot uses undocumented field RTC_TCON in
RTC_UDR_CON register.  According to S5M8767's datasheet this field is
reserved.  On S2MPS14 it is not documented at all.

On device first boot the registers will be initialized with reset value
(2000-01-01 00:00:00).

The code might work on S5M8763 but still this does not look like a task
for RTC driver.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver:

1. Rename SEC* symbols to S5M.
2. Add S5M prefix to some of defines which are different between S5M876X
   and S2MPS14.

This is only a rename-like patch, new code is not added.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make of_device_id array const, because all OF functions handle
it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make of_device_id array const, because all OF functions handle
it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When RTC CLKTRCTRL bit is configured in HW_AUTO, module goes to sleep in
IDLE state.

The Alarm SWakeup event can be used to wakeup the RTC when it is in IDLE
state.  In order to do so, the alarm needs to be set and enabled before
RTC enters the IDLE state.  Also the wakeup generation for alarm/timer
event needs to be set (bits [1:0] in RTC_IRQWAKEEN register).

Currently RTC_IRQWAKEEN bits are set only in suspend/resume paths.  With
this ALARM interrupts are not generated when it enters IDLE state.  So
programming the RTC_IRQWAKEEN bits when ever ALARM is set.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>