The current metadata file code skips disk address lookup for its data
block if the buffer has a mapped flag.

This has a potential risk to cause read request to be performed
against the stale block address that GC moved, and it may lead to meta
data corruption.  The mapped flag is safe if the buffer has an
uptodate flag, otherwise it may prevent necessary update of disk
address in the next read.

This will avoid the potential problem by ensuring disk address lookup
before reading metadata block even for buffers with the mapped flag.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

will get rid of nilfs_get_writer() and nilfs_put_writer() pair used to
retain a writable FS-instance for a period.

The pair functions were making up some kind of recursive lock with a
mutex, but they became overkill since the commit
201913ed.  Furthermore, they caused
the following lockdep warning because the mutex can be released by a
task which didn't lock it:

 =====================================
 [ BUG: bad unlock balance detected! ]
 -------------------------------------
 kswapd0/422 is trying to release lock (&nilfs->ns_writer_mutex) at:
 [<c1359ff5>] mutex_unlock+0x8/0xa
 but there are no more locks to release!

 other info that might help us debug this:
 no locks held by kswapd0/422.

 stack backtrace:
 Pid: 422, comm: kswapd0 Not tainted 2.6.31-rc4-nilfs #51
 Call Trace:
  [<c1358f97>] ? printk+0xf/0x18
  [<c104fea7>] print_unlock_inbalance_bug+0xcc/0xd7
  [<c11578de>] ? prop_put_global+0x3/0x35
  [<c1050195>] lock_release+0xed/0x1dc
  [<c1359ff5>] ? mutex_unlock+0x8/0xa
  [<c1359f83>] __mutex_unlock_slowpath+0xaf/0x119
  [<c1359ff5>] mutex_unlock+0x8/0xa
  [<d1284add>] nilfs_mdt_write_page+0xd8/0xe1 [nilfs2]
  [<c1092653>] shrink_page_list+0x379/0x68d
  [<c109171b>] ? isolate_pages_global+0xb4/0x18c
  [<c1092bd2>] shrink_list+0x26b/0x54b
  [<c10930be>] shrink_zone+0x20c/0x2a2
  [<c10936b7>] kswapd+0x407/0x591
  [<c1091667>] ? isolate_pages_global+0x0/0x18c
  [<c1040603>] ? autoremove_wake_function+0x0/0x33
  [<c10932b0>] ? kswapd+0x0/0x591
  [<c104033b>] kthread+0x69/0x6e
  [<c10402d2>] ? kthread+0x0/0x6e
  [<c1003e33>] kernel_thread_helper+0x7/0x1a

This patch uses a reader/writer semaphore instead of the own lock and
kills this warning.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This adds a missing unlock of nilfs->ns_writer_mutex in
nilfs_mdt_write_page() function.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This applies block_sync_page() function to the sync_page method of
page caches for meta data files, gc page caches, and btree node
buffers.  This is a companion patch of ("nilfs2: enable sync_page
mothod") which applied the function for data pages.

This allows lock_page() for those meta data to unplug pending bio
requests.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Previously, default_backing_dev_info was used for the mapping of btree
node caches.  This uses device dependent backing_dev_info to allow
detailed control of the device for the btree node pages.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This would fix the following failure during GC:

 nilfs_cpfile_delete_checkpoints: cannot delete block
 NILFS: GC failed during preparation: cannot delete checkpoints: err=-2

The problem was caused by a break in state consistency between page
cache and btree; the above block was removed from the btree but the
page buffering the block was remaining in the page cache in dirty
state.

This resolves the inconsistency by ensuring to clear dirty state of
the page buffering the deleted block.
Reported-by: NDavid Arendt <admin@prnet.org>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This fixes the following circular locking dependency problem:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3 #5
 -------------------------------------------------------
 segctord/3895 is trying to acquire lock:
  (&nilfs->ns_writer_mutex){+.+...}, at: [<d0d02172>]
   nilfs_mdt_get_block+0x89/0x20f [nilfs2]

 but task is already holding lock:
  (&bmap->b_sem){++++..}, at: [<d0d02d99>]
   nilfs_bmap_propagate+0x14/0x2e [nilfs2]

 which lock already depends on the new lock.

The bugfix is done by replacing call sites of nilfs_get_writer() which
are never called from read-only context with direct dereferencing of
pointer to a writable FS-instance.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Pekka Enberg advised me:
> It would be nice if BUG(), BUG_ON(), and panic() calls would be
> converted to proper error handling using WARN_ON() calls. The BUG()
> call in nilfs_cpfile_delete_checkpoints(), for example, looks to be
> triggerable from user-space via the ioctl() system call.

This will follow the comment and keep them to a minimum.
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pekka Enberg pointed out that double error handlings found after
nilfs_transaction_end() can be avoided by separating abort operation:

 OK, I don't understand this. The only way nilfs_transaction_end() can
 fail is if we have NILFS_TI_SYNC set and we fail to construct the
 segment. But why do we want to construct a segment if we don't commit?

 I guess what I'm asking is why don't we have a separate
 nilfs_transaction_abort() function that can't fail for the erroneous
 case to avoid this double error value tracking thing?

This does the separation and renames nilfs_transaction_end() to
nilfs_transaction_commit() for clarification.

Since, some calls of these functions were used just for exclusion control
against the segment constructor, they are replaced with semaphore
operations.
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds the meta data file, which serves common buffer functions to the
DAT, sufile, cpfile, ifile, and so forth.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>