For hash we create vmemmap mapping using bolted hash page table entries.
For radix we fill the radix page table. The next patch will add the
radix details for creating vmemmap mappings.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds routines for early setup for radix. We use device tree
property "ibm,processor-radix-AP-encodings" to find supported page
sizes. If we don't find the above we consider 64K and 4K as supported
page sizes.

We do map vmemap using 2M page size if we can. The linear mapping is
done such that we use required page size for that range. For example
memory of 3.5G is mapped such that we use 1G mapping till 3G range and
use 2M mapping for the rest.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This only does 64K Linux page support for now. 64K hash Linux config
THP needs to differentiate it from hugetlb huge page because with THP we
need to track hash pte slot information with respect to each subpage.
This is not needed with hugetlb hugepage, because we don't do MPSS with
hugetlb.

Radix doesn't have any such restrictions.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Here we create pgtable-64/4k.h and move pmd accessors that are common
between hash and radix there. We can't do much sharing with 4K Linux
page size because 4K Linux page size with hash config doesn't support
THP. So for now it is empty. In later patches we will add functions that
does conditional hash/radix accessors there.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

For those pte accessors, that operate on a different set of pte bits
between hash/radix, we add a generic variant that does a conditional
to hash linux or radix variant.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In this patch we add the radix Kconfig and conditional check.
radix_enabled() is written to always return 0 here. Once we have all
needed radix changes added, we will update this to an mmu_feature check.

We need to add this early so that we can get it all build in the early
stage.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds Power ISA 3.0 specific pte defines. We share most of the
details with hash Linux page table format. This patch indicates only
things where we differ.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Only code movement. No functionality change.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that the page table size is a variable, we can move these to
generic pgtable.h.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Radix and hash MMU models support different page table sizes. Make
the #defines a variable so that existing code can work with variable
sizes.

Slice related code is only used by hash, so use hash constants there. We
will replicate some of the boundary conditions with resepct to TASK_SIZE
using radix values too. Right now we do boundary condition check using
hash constants.

Swapper pgdir size is initialized in asm code. We select the max pgd
size to keep it simple. For now we select hash pgdir. When adding radix
we will switch that to radix pgdir which is 64K.

BUILD_BUG_ON check which is removed is already done in hugepage_init()
using MAYBE_BUILD_BUG_ON().
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

These pte functions will remain the same between radix and hash. Move
them to pgtable.h.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that we have moved book3s hash64 Linux pte bits to match Power ISA
3.0 radix pte bit positions, we move the matching pte bits to a common
header.

Only code movement in this patch. No functionality change.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

I am splitting this as a separate patch to get better review. If ok
we should merge this with previous patch.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This helps to make following hash only pte bits easier.

We have kept _PAGE_CHG_MASK, _HPAGE_CHG_MASK and _PAGE_PROT_BITS as it
is in this patch eventhough they use hash specific bits. Using them in
radix as it is should be ok, because with radix we expect those bit
positions to be zero.

Only renames in this patch, no change in functionality.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

PowerISA 3.0 adds a parition table indexed by LPID. Parition table
allows us to specify the MMU model that will be used for guest and host
translation.

This patch adds support with SLB based hash model (UPRT = 0). What is
required with this model is to support the new hash page table entry
format and also setup partition table such that we use hash table for
address translation.

We don't have segment table support yet.

In order to make sure we don't load KVM module on Power9 (since we don't
have kvm support yet) this patch also disables KVM on Power9.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add structs and #defines related to the radix MMU partition table
format. We also add a ppc_md callback for updating a partition table
entry.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Start moving code that is generic between radix and hash to book3s64
specific headers from the book3s64 hash specific one.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The radix variant is going to require a flush_tlb_range(). With
flush_tlb_range() added, ptep_clear_flush_young() is the same as the
generic version. So drop the powerpc specific variant.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The radix variant is going to require a flush_pmd_tlb_range(). With
flush_pmd_tlb_range() added, pmdp_clear_flush_young() is the same as the
generic version. So drop the powerpc specific variant.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

PowerISA 3.0 introduces two pte bits with the below meaning for radix:
  00 -> Normal Memory
  01 -> Strong Access Order (SAO)
  10 -> Non idempotent I/O (Cache inhibited and guarded)
  11 -> Tolerant I/O (Cache inhibited)

We drop the existing WIMG bits in the Linux page table in favour of the
above constants. We loose _PAGE_WRITETHRU with this conversion. We only
use writethru via pgprot_cached_wthru() which is used by
fbdev/controlfb.c which is Apple control display and also PPC32.

With respect to _PAGE_COHERENCE, we have been marking hpte always
coherent for some time now. htab_convert_pte_flags() always added
HPTE_R_M.

NOTE: KVM changes need closer review.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

PS3 had used a PPP bit hack to implement a read only mapping in the
kernel area. Since we are bolting the ioremap area, it used the pte
flags _PAGE_PRESENT | _PAGE_USER to get a PPP value of 0x3 there by
resulting in a read only mapping. This means the area can be accessed by
user space, but kernel will never return such an address to user space.

But we can do better by implementing a read only kernel mapping using
PPP bits 0b110.

This also allows us to do read only kernel mapping for radix in later
patches.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

PTE_RPN_SHIFT is actually page size dependent. Even though PowerISA 3.0
expects only the lower 12 bits to be zero, we will always find the pages
to be PAGE_SHIFT aligned. In case of hash config, this also allows us to
use the additional 3 bits to track pte specific information. We need
to make sure we use these bits only for hash specific pte flags.

For both 4K and 64K config, pte now can hold 57 bits address.

Inorder to keep things simpler, drop PTE_RPN_SHIFT and PTE_RPN_SIZE and
specify the 57 bit detail explicitly.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

_PAGE_PRIVILEGED means the page can be accessed only by the kernel. This
is done to keep pte bits similar to PowerISA 3.0 Radix PTE format. User
pages are now marked by clearing _PAGE_PRIVILEGED bit.

Previously we allowed the kernel to have a privileged page in the lower
address range (USER_REGION). With this patch such access is denied.

We also prevent a kernel access to a non-privileged page in higher
address range (ie, REGION_ID != 0).

Both the above access scenarios should never happen.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We have a common declaration in pte-common.h Add a book3s specific one
and switch to pte_user() in callchain.c. In a subsequent patch we will
switch _PAGE_USER to _PAGE_PRIVILEGED in the book3s version only.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This splits the _PAGE_RW bit into _PAGE_READ and _PAGE_WRITE. It also
removes the dependency on _PAGE_USER for implying read only. Few things
to note here is that, we have read implied with write and execute
permission. Hence we should always find _PAGE_READ set on hash pte
fault.

We still can't switch PROT_NONE to !(_PAGE_RWX). Auto numa depends on
marking a prot none pte _PAGE_WRITE. (For more details look at
b191f9b1 "mm: numa: preserve PTE write permissions across a NUMA
hinting fault")

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We can avoid doing endian conversions by using pte_raw() in pxx_same().
The swap of the constant (_PAGE_HPTEFLAGS) should be done at compile
time by the compiler.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Traditionally Power server machines have used the Hashed Page Table MMU
mode. In this mode Linux manages its own tree of nested page tables,
aka. "the Linux page tables", which are not used by the hardware
directly, and software loads translations into the hash page table for
use by the hardware.

Power ISA 3.0 defines a new MMU mode, known as Radix Tree Translation,
where the hardware can directly operate on the Linux page tables.
However the hardware requires that the page tables be in big endian
format.

To accommodate this, switch the pgtable types to __be64 and add
appropriate endian conversions.

Because we will be supporting a single kernel binary that boots using
either radix or hash mode, we always store the Linux page tables big
endian, even in hash mode where they are not actually used by the
hardware.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Fix sparse errors, flesh out change log]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

pmd_hugepage_update() is inside #ifdef CONFIG_TRANSPARENT_HUGEPAGE. THP
can only be enabled if PPC_BOOK3S_64=y && PPC_64K_PAGES=y, aka. hash64.

On hash64 we always define PTE_ATOMIC_UPDATES to 1, meaning the #ifdef
in pmd_hugepage_update() is unnecessary, so drop it.

That is also the only use of PTE_ATOMIC_UPDATES in any of the hash code,
meaning we no longer need to #define it at all in the hash headers.

Note it's still #defined and used in the nohash code.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

No code changes.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

No code changes.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This is needed so that we can support both hash and radix page table
using single kernel. Radix kernel uses a 4 level table.

We now use physical address in upper page table tree levels. Even though
they are aligned to their size, for the masked bits we use the
bit positions as per PowerISA 3.0.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We remove real_pte_t out of STRICT_MM_TYPESCHECK.
Reviewed-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that other PTE fields have been moved out of the way, we can
expand the RPN field of the PTE on 64-bit Book 3S systems and align
it with the RPN field in the radix PTE format used by PowerISA v3.0
CPUs in radix mode.  For 64k page size, this means we need to move
the _PAGE_COMBO and _PAGE_4K_PFN bits.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This moves the _PAGE_SPECIAL and _PAGE_SOFT_DIRTY bits in the Linux
PTE on 64-bit Book 3S systems to bit positions which are designated
for software use in the radix PTE format used by PowerISA v3.0 CPUs
in radix mode.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This moves the _PAGE_EXEC, _PAGE_RW and _PAGE_USER bits around in
the Linux PTE on 64-bit Book 3S systems to correspond with the bit
positions used in radix mode by PowerISA v3.0 CPUs.  This also adds
a _PAGE_READ bit corresponding to the read permission bit in the
radix PTE.  _PAGE_READ is currently unused but could possibly be used
in future to improve pte_protnone().
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This moves the _PAGE_HASHPTE, _PAGE_F_GIX and _PAGE_F_SECOND fields in
the Linux PTE on 64-bit Book 3S systems to the most significant byte.
Of the 5 bits, one is a software-use bit and the other four are
reserved bit positions in the PowerISA v3.0 radix PTE format.
Using these bits is OK because these bits are all to do with tracking
the HPTE(s) associated with the Linux PTE, and therefore won't be
needed in radix mode.  This frees up bit positions in the lower two
bytes.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This changes _PAGE_PTE for 64-bit Book 3S processors from 0x1 to
0x4000_0000_0000_0000, because that bit is used as the L (leaf)
bit by PowerISA v3.0 CPUs in radix mode.  The "leaf" bit indicates
that the PTE points to a page directly rather than another radix
level, which is what the _PAGE_PTE bit means.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This changes _PAGE_PRESENT for 64-bit Book 3S processors from 0x2 to
0x8000_0000_0000_0000, because that is where PowerISA v3.0 CPUs in
radix mode will expect to find it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This changes the Linux page tables to store physical addresses
rather than kernel virtual addresses in the upper levels of the
tree (pgd, pud and pmd) for 64-bit Book 3S machines.

This also changes the hugepd pointers used to implement hugepages
when the base page size is 4k to store physical addresses rather than
virtual addresses (again just for 64-bit Book3S machines).

This frees up some high order bits, and will be needed with
PowerISA v3.0 machines which read the page table tree in hardware
in radix mode.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>