Use the right device to determine if redirect should be sent especially
when using vrf. Same as well as when sending the redirect.
Signed-off-by: NStephen Suryaputra <ssuryaextr@gmail.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ncsi_rsp_handler_gc() allocates the filter arrays using GFP_KERNEL in
softirq context, causing the below backtrace. This allocation is only a
few dozen bytes during probing so allocate with GFP_ATOMIC instead.

[   42.813372] BUG: sleeping function called from invalid context at mm/slab.h:416
[   42.820900] in_atomic(): 1, irqs_disabled(): 0, pid: 213, name: kworker/0:1
[   42.827893] INFO: lockdep is turned off.
[   42.832023] CPU: 0 PID: 213 Comm: kworker/0:1 Tainted: G        W       4.13.16-01441-gad99b38 #65
[   42.841007] Hardware name: Generic DT based system
[   42.845966] Workqueue: events ncsi_dev_work
[   42.850251] [<8010a494>] (unwind_backtrace) from [<80107510>] (show_stack+0x20/0x24)
[   42.858046] [<80107510>] (show_stack) from [<80612770>] (dump_stack+0x20/0x28)
[   42.865309] [<80612770>] (dump_stack) from [<80148248>] (___might_sleep+0x230/0x2b0)
[   42.873241] [<80148248>] (___might_sleep) from [<80148334>] (__might_sleep+0x6c/0xac)
[   42.881129] [<80148334>] (__might_sleep) from [<80240d6c>] (__kmalloc+0x210/0x2fc)
[   42.888737] [<80240d6c>] (__kmalloc) from [<8060ad54>] (ncsi_rsp_handler_gc+0xd0/0x170)
[   42.896770] [<8060ad54>] (ncsi_rsp_handler_gc) from [<8060b454>] (ncsi_rcv_rsp+0x16c/0x1d4)
[   42.905314] [<8060b454>] (ncsi_rcv_rsp) from [<804d86c8>] (__netif_receive_skb_core+0x3c8/0xb50)
[   42.914158] [<804d86c8>] (__netif_receive_skb_core) from [<804d96cc>] (__netif_receive_skb+0x20/0x7c)
[   42.923420] [<804d96cc>] (__netif_receive_skb) from [<804de4b0>] (netif_receive_skb_internal+0x78/0x6a4)
[   42.932931] [<804de4b0>] (netif_receive_skb_internal) from [<804df980>] (netif_receive_skb+0x78/0x158)
[   42.942292] [<804df980>] (netif_receive_skb) from [<8042f204>] (ftgmac100_poll+0x43c/0x4e8)
[   42.950855] [<8042f204>] (ftgmac100_poll) from [<804e094c>] (net_rx_action+0x278/0x4c4)
[   42.958918] [<804e094c>] (net_rx_action) from [<801016a8>] (__do_softirq+0xe0/0x4c4)
[   42.966716] [<801016a8>] (__do_softirq) from [<8011cd9c>] (do_softirq.part.4+0x50/0x78)
[   42.974756] [<8011cd9c>] (do_softirq.part.4) from [<8011cebc>] (__local_bh_enable_ip+0xf8/0x11c)
[   42.983579] [<8011cebc>] (__local_bh_enable_ip) from [<804dde08>] (__dev_queue_xmit+0x260/0x890)
[   42.992392] [<804dde08>] (__dev_queue_xmit) from [<804df1f0>] (dev_queue_xmit+0x1c/0x20)
[   43.000689] [<804df1f0>] (dev_queue_xmit) from [<806099c0>] (ncsi_xmit_cmd+0x1c0/0x244)
[   43.008763] [<806099c0>] (ncsi_xmit_cmd) from [<8060dc14>] (ncsi_dev_work+0x2e0/0x4c8)
[   43.016725] [<8060dc14>] (ncsi_dev_work) from [<80133dfc>] (process_one_work+0x214/0x6f8)
[   43.024940] [<80133dfc>] (process_one_work) from [<80134328>] (worker_thread+0x48/0x558)
[   43.033070] [<80134328>] (worker_thread) from [<8013ba80>] (kthread+0x130/0x174)
[   43.040506] [<8013ba80>] (kthread) from [<80102950>] (ret_from_fork+0x14/0x24)

Fixes: 062b3e1b ("net/ncsi: Refactor MAC, VLAN filters")
Signed-off-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix to return error code -EINVAL instead of 0 if optlen is invalid.

Fixes: 01d2f7e2 ("net/smc: sockopts TCP_NODELAY and TCP_CORK")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If there is a significant amount of chains list search is too slow, so
add an rhlist table for this.

This speeds up ruleset loading: for every new rule we have to check if
the name already exists in current generation.

We need to be able to cope with duplicate chain names in case a transaction
drops the nfnl mutex (for request_module) and the abort of this old
transaction is still pending.

The list is kept -- we need a way to iterate chains even if hash resize is
in progress without missing an entry.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This features which allows you to limit the maximum number of
connections per arbitrary key. The connlimit expression is stateful,
therefore it can be used from meters to dynamically populate a set, this
provides a mapping to the iptables' connlimit match. This patch also
comes that allows you define static connlimit policies.

This extension depends on the nf_conncount infrastructure.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Before this patch, cloned expressions are released via ->destroy. This
is a problem for the new connlimit expression since the ->destroy path
drop a reference on the conntrack modules and it unregisters hooks. The
new ->destroy_clone provides context that this expression is being
released from the packet path, so it is mirroring ->clone(), where
neither module reference is dropped nor hooks need to be unregistered -
because this done from the control plane path from the ->init() path.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Use garbage collector to schedule removal of elements based of feedback
from expression that this element comes with. Therefore, the garbage
collector is not guided by timeout expirations in this new mode.

The new connlimit expression sets on the NFT_EXPR_GC flag to enable this
behaviour, the dynset expression needs to explicitly enable the garbage
collector via set->ops->gc_init call.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

nft_set_elem_destroy() can be called from call_rcu context. Annotate
netns and table in set object so we can populate the context object.
Moreover, pass context object to nf_tables_set_elem_destroy() from the
commit phase, since it is already available from there.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch provides an interface to maintain the list of connections and
the lookup function to obtain the number of connections in the list.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The new connlimit object needs this to properly deal with conntrack
dependencies.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The extracted functions will likely be usefull to implement tproxy
support in nf_tables.

Extrancted functions:
	- nf_tproxy_sk_is_transparent
	- nf_tproxy_laddr4
	- nf_tproxy_handle_time_wait4
	- nf_tproxy_get_sock_v4
	- nf_tproxy_laddr6
	- nf_tproxy_handle_time_wait6
	- nf_tproxy_get_sock_v6

(nf_)tproxy_handle_time_wait6 also needed some refactor as its current
implementation was xtables-specific.
Signed-off-by: NMáté Eckl <ecklm94@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

There is a function in include/net/netfilter/nf_socket.h to decide if a
socket has IP(V6)_TRANSPARENT socket option set or not. However this
does the same as inet_sk_transparent() in include/net/tcp.h

include/net/tcp.h:1733
/* This helper checks if socket has IP_TRANSPARENT set */
static inline bool inet_sk_transparent(const struct sock *sk)
{
	switch (sk->sk_state) {
	case TCP_TIME_WAIT:
		return inet_twsk(sk)->tw_transparent;
	case TCP_NEW_SYN_RECV:
		return inet_rsk(inet_reqsk(sk))->no_srccheck;
	}
	return inet_sk(sk)->transparent;
}

tproxy_sk_is_transparent has also been refactored to use this function
instead of reimplementing it.
Signed-off-by: NMáté Eckl <ecklm94@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

I don't know where this value comes from (probably a copy and paste and
paste and paste ...).
Let's use standard values which are a bit greater.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/netdev-vger-cvs.git/commit/?id=e5afd356a411aSigned-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit f6cc9c05, the following conf is broken (note that the
default loopback mtu is 65536, ie IP_MAX_MTU + 1):

$ ip tunnel add gre1 mode gre local 10.125.0.1 remote 10.125.0.2 dev lo
add tunnel "gre0" failed: Invalid argument
$ ip l a type dummy
$ ip l s dummy1 up
$ ip l s dummy1 mtu 65535
$ ip tunnel add gre1 mode gre local 10.125.0.1 remote 10.125.0.2 dev dummy1
add tunnel "gre0" failed: Invalid argument

dev_set_mtu() doesn't allow to set a mtu which is too large.
First, let's cap the mtu returned by ip_tunnel_bind_dev(). Second, remove
the magic value 0xFFF8 and use IP_MAX_MTU instead.
0xFFF8 seems to be there for ages, I don't know why this value was used.

With a recent kernel, it's also possible to set a mtu > IP_MAX_MTU:
$ ip l s dummy1 mtu 66000
After that patch, it's also possible to bind an ip tunnel on that kind of
interface.

CC: Petr Machata <petrm@mellanox.com>
CC: Ido Schimmel <idosch@mellanox.com>
Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/netdev-vger-cvs.git/commit/?id=e5afd356a411a
Fixes: f6cc9c05 ("ip_tunnel: Emit events for post-register MTU changes")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tc_ctl_tfilter handles three netlink message types: RTM_NEWTFILTER,
RTM_DELTFILTER, RTM_GETTFILTER. However, implementation of this function
involves a lot of branching on specific message type because most of the
code is message-specific. This significantly complicates adding new
functionality and doesn't provide much benefit of code reuse.

Split tc_ctl_tfilter to three standalone functions that handle filter new,
delete and get requests.

The only truly protocol independent part of tc_ctl_tfilter is code that
looks up queue, class, and block. Refactor this code to standalone
tcf_block_find function that is used by all three new handlers.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In rtnl_newlink(), NULL check is performed on m_ops however member of
ops is accessed. Fixed by accessing member of m_ops instead of ops.

[  345.432629] BUG: KASAN: null-ptr-deref in rtnl_newlink+0x400/0x1110
[  345.432629] Read of size 4 at addr 0000000000000088 by task ip/986
[  345.432629]
[  345.432629] CPU: 1 PID: 986 Comm: ip Not tainted 4.17.0-rc6+ #9
[  345.432629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[  345.432629] Call Trace:
[  345.432629]  dump_stack+0xc6/0x150
[  345.432629]  ? dump_stack_print_info.cold.0+0x1b/0x1b
[  345.432629]  ? kasan_report+0xb4/0x410
[  345.432629]  kasan_report.cold.4+0x8f/0x91
[  345.432629]  ? rtnl_newlink+0x400/0x1110
[  345.432629]  rtnl_newlink+0x400/0x1110
[...]

Fixes: ccf8dbcd ("rtnetlink: Remove VLA usage")
Signed-off-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Tested-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

(resend for properly queueing in patchwork)

kcm_clone() creates kernel socket, which does not take net counter.
Thus, the net may die before the socket is completely destructed,
i.e. kcm_exit_net() is executed before kcm_done().

Reported-by: syzbot+5f1a04e374a635efc426@syzkaller.appspotmail.com
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for FTP commands with extended format (RFC 2428):

- FTP EPRT: IPv4 and IPv6, active mode, similar to PORT
- FTP EPSV: IPv4 and IPv6, passive mode, similar to PASV.
EPSV response usually contains only port but we allow real
server to provide different address

We restrict control and data connection to be from same
address family.

Allow the "(" and ")" to be optional in PASV response.

Also, add ipvsh argument to the pkt_in/pkt_out handlers to better
access the payload after transport header.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Prepare NFCT to support IPv6 for FTP:

- Do not restrict the expectation callback to PF_INET

- Split the debug messages, so that the 160-byte limitation
in IP_VS_DBG_BUF is not exceeded when printing many IPv6
addresses. This means no more than 3 addresses in one message,
i.e. 1 tuple with 2 addresses or 1 connection with 3 addresses.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This allows us to forward packets from the netdev family via neighbour
layer, so you don't need an explicit link-layer destination when using
this expression from rules. The ttl/hop_limit field is decremented.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

In the quest to remove all stack VLA usage from the kernel[1], this
allocates the maximum size expected for all possible attrs and adds
sanity-checks at both registration and usage to make sure nothing
gets out of sync.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Some drivers, such as vxlan and wireguard, use the skb's dst in order to
determine things like PMTU. They therefore loose functionality when flow
offloading is enabled. So, we ensure the skb has it before xmit'ing it
in the offloading path.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The following ruleset:

 add table ip filter
 add chain ip filter input { type filter hook input priority 4; }
 add chain ip filter ap
 add rule ip filter input jump ap
 add rule ip filter ap masquerade

results in a panic, because the masquerade extension should be rejected
from the filter chain. The existing validation is missing a chain
dependency check when the rule is added to the non-base chain.

This patch fixes the problem by walking down the rules from the
basechains, searching for either immediate or lookup expressions, then
jumping to non-base chains and again walking down the rules to perform
the expression validation, so we make sure the full ruleset graph is
validated. This is done only once from the commit phase, in case of
problem, we abort the transaction and perform fine grain validation for
error reporting. This patch requires 00308791 ("netfilter:
nfnetlink: allow commit to fail") to achieve this behaviour.

This patch also adds a cleanup callback to nfnl batch interface to reset
the validate state from the exit path.

As a result of this patch, nf_tables_check_loops() doesn't use
->validate to check for loops, instead it just checks for immediate
expressions.
Reported-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This extends log statement to support the behaviour achieved with
AUDIT target in iptables.

Audit logging is enabled via a pseudo log level 8. In this case any
other settings like log prefix are ignored since audit log format is
fixed.
Signed-off-by: NPhil Sutter <phil@nwl.cc>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Now it can only match the transparent flag of an ip/ipv6 socket.
Signed-off-by: NMáté Eckl <ecklm94@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

net/netfilter/nft_numgen.c:117:1-3: WARNING: PTR_ERR_OR_ZERO can be used
net/netfilter/nft_hash.c:180:1-3: WARNING: PTR_ERR_OR_ZERO can be used
net/netfilter/nft_hash.c:223:1-3: WARNING: PTR_ERR_OR_ZERO can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Fixes: b9ccc07e ("netfilter: nft_hash: add map lookups for hashing operations")
Fixes: d734a288 ("netfilter: nft_numgen: add map lookups for numgen statements")
CC: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Nkbuild test robot <fengguang.wu@intel.com>
Acked-by: NLaura Garcia Liebana <nevola@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch reorders the error cases in showing the XPS configuration so
that we hold off on memory allocation until after we have verified that we
can support XPS on a given ring.

Fixes: 184c449f ("net: Add support for XPS with QoS via traffic classes")
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the quest to remove all stack VLA usage from the kernel[1], this
allocates the maximum size expected for all possible types and adds
sanity-checks at both registration and usage to make sure nothing gets
out of sync. This matches the proposed VLA solution for nfnetlink[2]. The
values chosen here were based on finding assignments for .maxtype and
.slave_maxtype and manually counting the enums:

slave_maxtype (max 33):
	IFLA_BRPORT_MAX     33
	IFLA_BOND_SLAVE_MAX  9

maxtype (max 45):
	IFLA_BOND_MAX       28
	IFLA_BR_MAX         45
	__IFLA_CAIF_HSI_MAX  8
	IFLA_CAIF_MAX        4
	IFLA_CAN_MAX        16
	IFLA_GENEVE_MAX     12
	IFLA_GRE_MAX        25
	IFLA_GTP_MAX         5
	IFLA_HSR_MAX         7
	IFLA_IPOIB_MAX       4
	IFLA_IPTUN_MAX      21
	IFLA_IPVLAN_MAX      3
	IFLA_MACSEC_MAX     15
	IFLA_MACVLAN_MAX     7
	IFLA_PPP_MAX         2
	__IFLA_RMNET_MAX     4
	IFLA_VLAN_MAX        6
	IFLA_VRF_MAX         2
	IFLA_VTI_MAX         7
	IFLA_VXLAN_MAX      28
	VETH_INFO_MAX        2
	VXCAN_INFO_MAX       2

This additionally changes maxtype and slave_maxtype fields to unsigned,
since they're only ever using positive values.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
[2] https://patchwork.kernel.org/patch/10439647/Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With CONFIG_CC_STACKPROTECTOR enabled the kernel panics as below when
parsing a NCSI_CMD_PKG_INFO command:

[  150.149711] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 805cff08
[  150.149711]
[  150.159919] CPU: 0 PID: 1301 Comm: ncsi-netlink Not tainted 4.13.16-468cbec6d2c91239332cb91b1f0a73aafcb6f0c6 #1
[  150.170004] Hardware name: Generic DT based system
[  150.174852] [<80109930>] (unwind_backtrace) from [<80106bc4>] (show_stack+0x20/0x24)
[  150.182641] [<80106bc4>] (show_stack) from [<805d36e4>] (dump_stack+0x20/0x28)
[  150.189888] [<805d36e4>] (dump_stack) from [<801163ac>] (panic+0xdc/0x278)
[  150.196780] [<801163ac>] (panic) from [<801162cc>] (__stack_chk_fail+0x20/0x24)
[  150.204111] [<801162cc>] (__stack_chk_fail) from [<805cff08>] (ncsi_pkg_info_all_nl+0x244/0x258)
[  150.212912] [<805cff08>] (ncsi_pkg_info_all_nl) from [<804f939c>] (genl_lock_dumpit+0x3c/0x54)
[  150.221535] [<804f939c>] (genl_lock_dumpit) from [<804f873c>] (netlink_dump+0xf8/0x284)
[  150.229550] [<804f873c>] (netlink_dump) from [<804f8d44>] (__netlink_dump_start+0x124/0x17c)
[  150.237992] [<804f8d44>] (__netlink_dump_start) from [<804f9880>] (genl_rcv_msg+0x1c8/0x3d4)
[  150.246440] [<804f9880>] (genl_rcv_msg) from [<804f9174>] (netlink_rcv_skb+0xd8/0x134)
[  150.254361] [<804f9174>] (netlink_rcv_skb) from [<804f96a4>] (genl_rcv+0x30/0x44)
[  150.261850] [<804f96a4>] (genl_rcv) from [<804f7790>] (netlink_unicast+0x198/0x234)
[  150.269511] [<804f7790>] (netlink_unicast) from [<804f7ffc>] (netlink_sendmsg+0x368/0x3b0)
[  150.277783] [<804f7ffc>] (netlink_sendmsg) from [<804abea4>] (sock_sendmsg+0x24/0x34)
[  150.285625] [<804abea4>] (sock_sendmsg) from [<804ac1dc>] (___sys_sendmsg+0x244/0x260)
[  150.293556] [<804ac1dc>] (___sys_sendmsg) from [<804ad98c>] (__sys_sendmsg+0x5c/0x9c)
[  150.301400] [<804ad98c>] (__sys_sendmsg) from [<804ad9e4>] (SyS_sendmsg+0x18/0x1c)
[  150.308984] [<804ad9e4>] (SyS_sendmsg) from [<80102640>] (ret_fast_syscall+0x0/0x3c)
[  150.316743] ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 805cff08

This turns out to be because the attrs array in ncsi_pkg_info_all_nl()
is initialised to a length of NCSI_ATTR_MAX which is the maximum
attribute number, not the number of attributes.

Fixes: 955dc68c ("net/ncsi: Add generic netlink family")
Signed-off-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we fail to modify a rule, we incorrectly release the idr handle
of the unmodified old rule.

Fix that by checking if we need to release it.

Fixes: fe2502e4 ("net_sched: remove cls_flower idr on failure")
Reported-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A driver might need to react to changes in settings of brentry VLANs.
Therefore send switchdev port notifications for these as well. Reuse
SWITCHDEV_OBJ_ID_PORT_VLAN for this purpose. Listeners should use
netif_is_bridge_master() on orig_dev to determine whether the
notification is about a bridge port or a bridge.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A follow-up patch enables emitting VLAN notifications for the bridge CPU
port in addition to the existing slave port notifications. These
notifications have orig_dev set to the bridge in question.

Because there's no specific support for these VLANs, just ignore the
notifications to maintain the current behavior.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extract the code that deals with adding a preexisting VLAN to bridge CPU
port to a separate function. A follow-up patch introduces a need to roll
back operations in this block due to an error, and this split will make
the error-handling code clearer.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A call to switchdev_port_obj_add() or switchdev_port_obj_del() involves
initializing a struct switchdev_obj_port_vlan, a piece of code that
repeats on each call site almost verbatim. While in the current codebase
there is just one duplicated add call, the follow-up patches add more of
both add and del calls.

Thus to remove the duplication, extract the repetition into named
functions and reuse.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Checking netif_xmit_frozen_or_stopped() at the end of sch_direct_xmit()
is being bypassed. This is because "ret" from sch_direct_xmit() will be
either NETDEV_TX_OK or NETDEV_TX_BUSY, and only ret == NETDEV_TX_OK == 0
will reach the condition:

    if (ret && netif_xmit_frozen_or_stopped(txq))
        return false;

This patch cleans up the code by removing the whole condition.

For more discussion about this, please refer to
   https://marc.info/?t=152727195700008Signed-off-by: NSong Liu <songliubraving@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is additional to the
commit ea1627c2 ("tcp: minor optimizations around tcp_hdr() usage").
At this point, skb->data is same with tcp_hdr() as tcp header has not
been pulled yet. So use the less expensive one to get the tcp header.

Remove the third parameter of tcp_rcv_established() and put it into
the function body.

Furthermore, the local variables are listed as a reverse christmas tree :)

Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NYafang Shao <laoar.shao@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We may derference an invalid pointer in the error path of
xfrm_bundle_create(). Fix this by returning this error
pointer directly instead of assigning it to xdst0.

Fixes: 45b018be ("ipsec: Create and use new helpers for dst child access.")
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

gcc-7.3.0 report following err:

  HOSTCC  net/bpfilter/main.o
In file included from net/bpfilter/main.c:9:0:
./include/uapi/linux/bpf.h:12:10: fatal error: linux/bpf_common.h: No such file or directory
 #include <linux/bpf_common.h>

remove it by adding a include path.
Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for IFA_RT_PRIORITY to ipv6 addresses.

If the metric is changed on an existing address then the new route
is inserted before removing the old one. Since the metric is one
of the route keys, the prefix route can not be atomically replaced.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for IFA_RT_PRIORITY to ipv4 addresses.

If the metric is changed on an existing address then the new route
is inserted before removing the old one. Since the metric is one
of the route keys, the prefix route can not be replaced.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>