- 22 5月, 2014 1 次提交
-
-
由 Jeff Layton 提交于
In later patches, we'll need to have a bitlock, so go ahead and convert these bools to use atomic bitops instead. Also, clean up the initialization of the flags field. There's no need to unset each bit individually just after it was zeroed on allocation. Signed-off-by: NJeff Layton <jlayton@poochiereds.net> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 17 4月, 2014 1 次提交
-
-
由 Sachin Prabhu 提交于
Problem reported in Red Hat bz 1040329 for strict writes where we cache only when we hold oplock and write direct to the server when we don't. When we receive an oplock break, we first change the oplock value for the inode in cifsInodeInfo->oplock to indicate that we no longer hold the oplock before we enqueue a task to flush changes to the backing device. Once we have completed flushing the changes, we return the oplock to the server. There are 2 ways here where we can have data corruption 1) While we flush changes to the backing device as part of the oplock break, we can have processes write to the file. These writes check for the oplock, find none and attempt to write directly to the server. These direct writes made while we are flushing from cache could be overwritten by data being flushed from the cache causing data corruption. 2) While a thread runs in cifs_strict_writev, the machine could receive and process an oplock break after the thread has checked the oplock and found that it allows us to cache and before we have made changes to the cache. In that case, we end up with a dirty page in cache when we shouldn't have any. This will be flushed later and will overwrite all subsequent writes to the part of the file represented by this page. Before making any writes to the server, we need to confirm that we are not in the process of flushing data to the server and if we are, we should wait until the process is complete before we attempt the write. We should also wait for existing writes to complete before we process an oplock break request which changes oplock values. We add a version specific downgrade_oplock() operation to allow for differences in the oplock values set for the different smb versions. Cc: stable@vger.kernel.org Signed-off-by: NSachin Prabhu <sprabhu@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 04 4月, 2014 2 次提交
-
-
由 Johannes Weiner 提交于
Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NRik van Riel <riel@redhat.com> Reviewed-by: NMinchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fabian Frederick 提交于
cifs_init_inodecache is only called by __init init_cifs. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 4月, 2014 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 13 3月, 2014 1 次提交
-
-
由 Theodore Ts'o 提交于
Previously, the no-op "mount -o mount /dev/xxx" operation when the file system is already mounted read-write causes an implied, unconditional syncfs(). This seems pretty stupid, and it's certainly documented or guaraunteed to do this, nor is it particularly useful, except in the case where the file system was mounted rw and is getting remounted read-only. However, it's possible that there might be some file systems that are actually depending on this behavior. In most file systems, it's probably fine to only call sync_filesystem() when transitioning from read-write to read-only, and there are some file systems where this is not needed at all (for example, for a pseudo-filesystem or something like romfs). Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Jan Kara <jack@suse.cz> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Anders Larsen <al@alarsen.net> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: fuse-devel@lists.sourceforge.net Cc: cluster-devel@redhat.com Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: linux-nilfs@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: reiserfs-devel@vger.kernel.org
-
- 25 10月, 2013 1 次提交
-
-
由 Al Viro 提交于
duplicated to hell and back... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 07 10月, 2013 1 次提交
-
-
由 Jan Klos 提交于
When connecting to SMB2/3 shares, maximum file size is set to non-LFS maximum in superblock. This is due to cap_large_files bit being different for SMB1 and SMB2/3 (where it is just an internal flag that is not negotiated and the SMB1 one corresponds to multichannel capability, so maybe LFS works correctly if server sends 0x08 flag) while capabilities are checked always for the SMB1 bit in cifs_read_super(). The patch fixes this by checking for the correct bit according to the protocol version. CC: Stable <stable@kernel.org> Signed-off-by: NJan Klos <honza.klos@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 10 9月, 2013 1 次提交
-
-
由 Pavel Shilovsky 提交于
that force a client to purge cache pages when a server requests it. Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 09 9月, 2013 2 次提交
-
-
由 Pavel Shilovsky 提交于
that prepare the code to handle different types of SMB2 leases. Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
...but only if it's not the default charset. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 01 8月, 2013 1 次提交
-
-
由 Jeff Layton 提交于
Currently, the s_root dentry doesn't get its d_op pointer set to anything. This breaks lookups in the root of case-insensitive mounts since that relies on having d_hash and d_compare routines that know to treat the filename as case-insensitive. cifs.ko has been broken this way for a long time, but commit 1c929cfe ("switch cifs"), added a cryptic comment which is removed in the patch below, which makes me wonder if this was done deliberately for some reason. It's not clear to me why we'd want the s_root not to have d_op set properly. It may have something to do with d_automount or d_revalidate on the root, but my suspicion in looking over the code is that Al was just trying to preserve the existing behavior when changing this code over to use s_d_op. This patch changes it so that we set s_d_op before calling d_make_root and removes the comment. I tested mounting, accessing and unmounting several types of shares (including DFS referrals) and everything still seemed to work OK afterward. I could be missing something however, so please do let me know if I am. Reported-by: NJan-Marek Glogowski <glogow@fbihome.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Ian Kent <raven@themaw.net> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 29 6月, 2013 2 次提交
-
-
由 Jeff Layton 提交于
Having a global lock that protects all of this code is a clear scalability problem. Instead of doing that, move most of the code to be protected by the i_lock instead. The exceptions are the global lists that the ->fl_link sits on, and the ->fl_block list. ->fl_link is what connects these structures to the global lists, so we must ensure that we hold those locks when iterating over or updating these lists. Furthermore, sound deadlock detection requires that we hold the blocked_list state steady while checking for loops. We also must ensure that the search and update to the list are atomic. For the checking and insertion side of the blocked_list, push the acquisition of the global lock into __posix_lock_file and ensure that checking and update of the blocked_list is done without dropping the lock in between. On the removal side, when waking up blocked lock waiters, take the global lock before walking the blocked list and dequeue the waiters from the global list prior to removal from the fl_block list. With this, deadlock detection should be race free while we minimize excessive file_lock_lock thrashing. Finally, in order to avoid a lock inversion problem when handling /proc/locks output we must ensure that manipulations of the fl_block list are also protected by the file_lock_lock. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 24 6月, 2013 1 次提交
-
-
由 Jeff Layton 提交于
Currently we have the overrideSecFlg field, but it's quite cumbersome to work with. Add some new fields that will eventually supercede it. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 25 5月, 2013 1 次提交
-
-
由 Jeff Layton 提交于
Since we no longer recognize that option, stop printing it out. The devicename is now the canonical source for this info. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 05 5月, 2013 1 次提交
-
-
由 Joe Perches 提交于
It's not obvious from reading the macro names that these macros are for debugging. Convert the names to a single more typical kernel style cifs_dbg macro. cERROR(1, ...) -> cifs_dbg(VFS, ...) cFYI(1, ...) -> cifs_dbg(FYI, ...) cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...) Move the terminating format newline from the macro to the call site. Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the "CIFS VFS: " prefix for VFS messages. Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y) $ size fs/cifs/cifs.ko* text data bss dec hex filename 265245 2525 132 267902 4167e fs/cifs/cifs.ko.new 268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old Other miscellaneous changes around these conversions: o Miscellaneous typo fixes o Add terminating \n's to almost all formats and remove them from the macros to be more kernel style like. A few formats previously had defective \n's o Remove unnecessary OOM messages as kmalloc() calls dump_stack o Coalesce formats to make grep easier, added missing spaces when coalescing formats o Use %s, __func__ instead of embedded function name o Removed unnecessary "cifs: " prefixes o Convert kzalloc with multiply to kcalloc o Remove unused cifswarn macro Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 14 3月, 2013 1 次提交
-
-
由 Mateusz Guzik 提交于
cifsFileInfo objects hold references to dentries and it is possible that these will still be around in workqueues when VFS decides to kill super block during unmount. This results in panics like this one: BUG: Dentry ffff88001f5e76c0{i=66b4a,n=1M-2} still in use (1) [unmount of cifs cifs] ------------[ cut here ]------------ kernel BUG at fs/dcache.c:943! [..] Process umount (pid: 1781, threadinfo ffff88003d6e8000, task ffff880035eeaec0) [..] Call Trace: [<ffffffff811b44f3>] shrink_dcache_for_umount+0x33/0x60 [<ffffffff8119f7fc>] generic_shutdown_super+0x2c/0xe0 [<ffffffff8119f946>] kill_anon_super+0x16/0x30 [<ffffffffa036623a>] cifs_kill_sb+0x1a/0x30 [cifs] [<ffffffff8119fcc7>] deactivate_locked_super+0x57/0x80 [<ffffffff811a085e>] deactivate_super+0x4e/0x70 [<ffffffff811bb417>] mntput_no_expire+0xd7/0x130 [<ffffffff811bc30c>] sys_umount+0x9c/0x3c0 [<ffffffff81657c19>] system_call_fastpath+0x16/0x1b Fix this by making each cifsFileInfo object hold a reference to cifs super block, which implicitly keeps VFS super block around as well. Signed-off-by: NMateusz Guzik <mguzik@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Cc: <stable@vger.kernel.org> Reported-and-Tested-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 11 3月, 2013 1 次提交
-
-
由 Eric W. Biederman 提交于
Somehow I failed to add the MODULE_ALIAS_FS for cifs, hostfs, hpfs, squashfs, and udf despite what I thought were my careful checks :( Add them now. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 28 2月, 2013 1 次提交
-
-
由 Jeff Layton 提交于
Kjell Braden reported this oops: [ 833.211970] BUG: unable to handle kernel NULL pointer dereference at (null) [ 833.212816] IP: [< (null)>] (null) [ 833.213280] PGD 1b9b2067 PUD e9f7067 PMD 0 [ 833.213874] Oops: 0010 [#1] SMP [ 833.214344] CPU 0 [ 833.214458] Modules linked in: des_generic md4 nls_utf8 cifs vboxvideo drm snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq bnep rfcomm snd_timer bluetooth snd_seq_device ppdev snd vboxguest parport_pc joydev mac_hid soundcore snd_page_alloc psmouse i2c_piix4 serio_raw lp parport usbhid hid e1000 [ 833.215629] [ 833.215629] Pid: 1752, comm: mount.cifs Not tainted 3.0.0-rc7-bisectcifs-fec11dd9+ #18 innotek GmbH VirtualBox/VirtualBox [ 833.215629] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 833.215629] RSP: 0018:ffff8800119c9c50 EFLAGS: 00010282 [ 833.215629] RAX: ffffffffa02186c0 RBX: ffff88000c427780 RCX: 0000000000000000 [ 833.215629] RDX: 0000000000000000 RSI: ffff88000c427780 RDI: ffff88000c4362e8 [ 833.215629] RBP: ffff8800119c9c88 R08: ffff88001fc15e30 R09: 00000000d69515c7 [ 833.215629] R10: ffffffffa0201972 R11: ffff88000e8f6a28 R12: ffff88000c4362e8 [ 833.215629] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88001181aaa6 [ 833.215629] FS: 00007f2986171700(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 [ 833.215629] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 833.215629] CR2: 0000000000000000 CR3: 000000001b982000 CR4: 00000000000006f0 [ 833.215629] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 833.215629] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 833.215629] Process mount.cifs (pid: 1752, threadinfo ffff8800119c8000, task ffff88001c1c16f0) [ 833.215629] Stack: [ 833.215629] ffffffff8116a9b5 ffff8800119c9c88 ffffffff81178075 0000000000000286 [ 833.215629] 0000000000000000 ffff88000c4276c0 ffff8800119c9ce8 ffff8800119c9cc8 [ 833.215629] ffffffff8116b06e ffff88001bc6fc00 ffff88000c4276c0 ffff88000c4276c0 [ 833.215629] Call Trace: [ 833.215629] [<ffffffff8116a9b5>] ? d_alloc_and_lookup+0x45/0x90 [ 833.215629] [<ffffffff81178075>] ? d_lookup+0x35/0x60 [ 833.215629] [<ffffffff8116b06e>] __lookup_hash.part.14+0x9e/0xc0 [ 833.215629] [<ffffffff8116b1d6>] lookup_one_len+0x146/0x1e0 [ 833.215629] [<ffffffff815e4f7e>] ? _raw_spin_lock+0xe/0x20 [ 833.215629] [<ffffffffa01eef0d>] cifs_do_mount+0x26d/0x500 [cifs] [ 833.215629] [<ffffffff81163bd3>] mount_fs+0x43/0x1b0 [ 833.215629] [<ffffffff8117d41a>] vfs_kern_mount+0x6a/0xd0 [ 833.215629] [<ffffffff8117e584>] do_kern_mount+0x54/0x110 [ 833.215629] [<ffffffff8117fdc2>] do_mount+0x262/0x840 [ 833.215629] [<ffffffff81108a0e>] ? __get_free_pages+0xe/0x50 [ 833.215629] [<ffffffff8117f9ca>] ? copy_mount_options+0x3a/0x180 [ 833.215629] [<ffffffff8118075d>] sys_mount+0x8d/0xe0 [ 833.215629] [<ffffffff815ece82>] system_call_fastpath+0x16/0x1b [ 833.215629] Code: Bad RIP value. [ 833.215629] RIP [< (null)>] (null) [ 833.215629] RSP <ffff8800119c9c50> [ 833.215629] CR2: 0000000000000000 [ 833.238525] ---[ end trace ec00758b8d44f529 ]--- When walking down the path on the server, it's possible to hit a symlink. The path walking code assumes that the caller will handle that situation properly, but cifs_get_root() isn't set up for it. This patch prevents the oops by simply returning an error. A better solution would be to try and chase the symlinks here, but that's fairly complicated to handle. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=53221Reported-and-tested-by: NKjell Braden <afflux@pentabarf.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 23 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 13 2月, 2013 1 次提交
-
-
由 Eric W. Biederman 提交于
Cc: Steve French <smfrench@gmail.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 02 1月, 2013 1 次提交
-
-
由 Pavel Shilovsky 提交于
that solution has data races and can end up two identical writes to the server: when clientCanCacheAll value can be changed during the execution of __generic_file_aio_write. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 21 12月, 2012 1 次提交
-
-
由 Jeff Layton 提交于
It's always set to "1" and there's no way to change it to anything else. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 18 12月, 2012 1 次提交
-
-
由 Andrew Morton 提交于
But the kernel decided to call it "origin" instead. Fix most of the sites. Acked-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 12月, 2012 1 次提交
-
-
由 Pavel Shilovsky 提交于
If we have a read oplock and set a read lock in it, we can't write to the locked area - so, filemap_fdatawrite may fail with a no information for a userspace application even if we request a write to non-locked area. Fix this by populating the page cache without marking affected pages dirty after a successful write directly to the server. Also remove CONFIG_CIFS_SMB2 ifdefs because it's suitable for both CIFS and SMB2 protocols. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 09 12月, 2012 1 次提交
-
-
由 Jeff Layton 提交于
The cifs.idmap handling code currently causes the kernel to cache the data from userspace twice. It first looks in a rbtree to see if there is a matching entry for the given id. If there isn't then it calls request_key which then checks its cache and then calls out to userland if it doesn't have one. If the userland program establishes a mapping and downcalls with that info, it then gets cached in the keyring and in this rbtree. Aside from the double memory usage and the performance penalty in doing all of these extra copies, there are some nasty bugs in here too. The code declares four rbtrees and spinlocks to protect them, but only seems to use two of them. The upshot is that the same tree is used to hold (eg) uid:sid and sid:uid mappings. The comparitors aren't equipped to deal with that. I think we'd be best off to remove a layer of caching in this code. If this was originally done for performance reasons, then that really seems like a premature optimization. This patch does that -- it removes the rbtrees and the locks that protect them and simply has the code do a request_key call on each call into sid_to_id and id_to_sid. This greatly simplifies this code and should roughly halve the memory utilization from using the idmapping code. Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 06 12月, 2012 2 次提交
-
-
由 Steve French 提交于
because the is no difference here. This also adds support of prefixpath mount option for SMB2. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Jeff Layton 提交于
Most of these are unsigned ints, so we should be passing "uint" to module_param. Also, get rid of the extra "(bool)" in the description of enable_oplocks. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 03 10月, 2012 1 次提交
-
-
由 Kirill A. Shutemov 提交于
There's no reason to call rcu_barrier() on every deactivate_locked_super(). We only need to make sure that all delayed rcu free inodes are flushed before we destroy related cache. Removing rcu_barrier() from deactivate_locked_super() affects some fast paths. E.g. on my machine exit_group() of a last process in IPC namespace takes 0.07538s. rcu_barrier() takes 0.05188s of that time. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 25 9月, 2012 7 次提交
-
-
由 Sachin Prabhu 提交于
The string for "unc=" in /proc/mounts needs to be escaped. The current behaviour can create problems in cases when mounting a share starting with a number. example: >mount -t cifs -o username=test,password=x vm140-31:/17000-test /mnt >mount -o remount,password=x /mnt mount error: could not resolve address for vm140-31x00-test: Unknown error The sub-string "\170" which is part of the unc for the mount above in /proc/mounts is interpreted as character'x' in the case above. Escaping the string fixes the problem. Signed-off-by: NSachin Prabhu <sprabhu@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
if server supports them and we need oplocks. Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
and allow several processes to walk through the lock list and read can_cache_brlcks value if they are not going to modify them. Signed-off-by: NPavel Shilovsky <pshilovsky@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Pavel Shilovsky 提交于
Now we need to lock/unlock a spinlock while processing brlock ops on the inode. Move brlocks of a fid to a separate list and attach all such lists to the inode. This let us not hold a spinlock. Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
-
由 Jeff Layton 提交于
Now that we aren't abusing the kmap address space, there's no need for this lock or to impose a limit on the rsize. Signed-off-by: NJeff Layton <jlayton@redhat.com>
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 25 7月, 2012 2 次提交
-
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Use SMB2 header size values for allocation and memset because they are bigger and suitable for both CIFS and SMB2. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 24 7月, 2012 1 次提交
-
-
由 Pavel Shilovsky 提交于
Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-