- 11 10月, 2013 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kbuild fix from Michal Marek: "Here is an ARM Makefile fix that you even acked. After nobody wanted to take it, it ended up in the kbuild tree" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: arm, kbuild: make "make install" not depend on vmlinux
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog fix from Wim Van Sebroeck: "Make sure that the hpwdt driver will not load auxilary iLO devices" * git://www.linux-watchdog.org/linux-watchdog: watchdog: hpwdt: Patch to ignore auxilary iLO devices
-
由 Fengguang Wu 提交于
Useful for locating buggy drivers on kernel oops. It may add dozens of new lines to boot dmesg. DEBUG_KOBJECT_RELEASE is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one, or at developers), so being a bit more verbose is likely ok. Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mingarelli, Thomas 提交于
This patch is to prevent hpwdt from loading on any auxilary iLO devices defined after the initial (or main) iLO device. All auxilary iLO devices will have a subsystem device ID set to 0x1979 in order for hpwdt to differentiate between the two types. Signed-off-by: NThomas Mingarelli <thomas.mingarelli@hp.com> Tested-by: NLisa Mitchell <lisa.mitchell@hp.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random由 Linus Torvalds 提交于
Pull /dev/random changes from Ted Ts'o: "These patches are designed to enable improvements to /dev/random for non-x86 platforms, in particular MIPS and ARM" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: allow architectures to optionally define random_get_entropy() random: run random_int_secret_init() run after all late_initcalls
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm fixes from Paolo Bonzini: "Fixes for 3.12-rc5: two old PPC bugs and one new (3.12-rc2) x86 bug" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: ppc: booke: check range page invalidation progress on page setup KVM: PPC: Book3S HV: Fix typo in saving DSCR KVM: nVMX: fix shadow on EPT
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi fixes from Mark Brown: "This is all driver updates, mostly fixes for error handling paths except for the s3c64xx and hspi fixes for trying to use runtime PM before it is enabled and the pxa2xx fix for interactions between power management and interrupt handling" * tag 'spi-v3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: atmel: Fix incorrect error path spi/hspi: fixup Runtime PM enable timing spi/s3c64xx: Ensure runtime PM is enabled prior to registration spi/clps711x: drop clk_put for devm_clk_get in spi_clps711x_probe() spi: fix return value check in dspi_probe() spi: mpc512x: fix error return code in mpc512x_psc_spi_do_probe() spi: clps711x: Don't call kfree() after spi_master_put/spi_unregister_master spi/pxa2xx: check status register as well to determine if the device is off
-
由 Theodore Ts'o 提交于
Allow architectures which have a disabled get_cycles() function to provide a random_get_entropy() function which provides a fine-grained, rapidly changing counter that can be used by the /dev/random driver. For example, an architecture might have a rapidly changing register used to control random TLB cache eviction, or DRAM refresh that doesn't meet the requirements of get_cycles(), but which is good enough for the needs of the random driver. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD fixes from Brian Norris: - fix a small memory leak in some new ONFI code - account for additional odd variations of Micron SPI flash Acked by David Woodhouse. * tag 'for-linus-20131008' of git://git.infradead.org/linux-mtd: mtd: m25p80: Fix 4 byte addressing mode for Micron devices. mtd: nand: fix memory leak in ONFI extended parameter page
-
- 10 10月, 2013 3 次提交
-
-
由 Bharat Bhushan 提交于
When the MM code is invalidating a range of pages, it calls the KVM kvm_mmu_notifier_invalidate_range_start() notifier function, which calls kvm_unmap_hva_range(), which arranges to flush all the TLBs for guest pages. However, the Linux PTEs for the range being flushed are still valid at that point. We are not supposed to establish any new references to pages in the range until the ...range_end() notifier gets called. The PPC-specific KVM code doesn't get any explicit notification of that; instead, we are supposed to use mmu_notifier_retry() to test whether we are or have been inside a range flush notifier pair while we have been referencing a page. This patch calls the mmu_notifier_retry() while mapping the guest page to ensure we are not referencing a page when in range invalidation. This call is inside a region locked with kvm->mmu_lock, which is the same lock that is called by the KVM MMU notifier functions, thus ensuring that no new notification can proceed while we are in the locked region. Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Acked-by: NAlexander Graf <agraf@suse.de> [Backported to 3.12 - Paolo] Reviewed-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paul Mackerras 提交于
This fixes a typo in the code that saves the guest DSCR (Data Stream Control Register) into the kvm_vcpu_arch struct on guest exit. The effect of the typo was that the DSCR value was saved in the wrong place, so changes to the DSCR by the guest didn't persist across guest exit and entry, and some host kernel memory got corrupted. Cc: stable@vger.kernel.org [v3.1+] Signed-off-by: NPaul Mackerras <paulus@samba.org> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Gleb Natapov 提交于
72f85795 broke shadow on EPT. This patch reverts it and fixes PAE on nEPT (which reverted commit fixed) in other way. Shadow on EPT is now broken because while L1 builds shadow page table for L2 (which is PAE while L2 is in real mode) it never loads L2's GUEST_PDPTR[0-3]. They do not need to be loaded because without nested virtualization HW does this during guest entry if EPT is disabled, but in our case L0 emulates L2's vmentry while EPT is enables, so we cannot rely on vmcs12->guest_pdptr[0-3] to contain up-to-date values and need to re-read PDPTEs from L2 memory. This is what kvm_set_cr3() is doing, but by clearing cache bits during L2 vmentry we drop values that kvm_set_cr3() read from memory. So why the same code does not work for PAE on nEPT? kvm_set_cr3() reads pdptes into vcpu->arch.walk_mmu->pdptrs[]. walk_mmu points to vcpu->arch.nested_mmu while nested guest is running, but ept_load_pdptrs() uses vcpu->arch.mmu which contain incorrect values. Fix that by using walk_mmu in ept_(load|save)_pdptrs. Signed-off-by: NGleb Natapov <gleb@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Tested-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 09 10月, 2013 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Various fixlets: On the kernel side: - fix a race - fix a bug in the handling of the perf ring-buffer data page On the tooling side: - fix the handling of certain corrupted perf.data files - fix a bug in 'perf probe' - fix a bug in 'perf record + perf sched' - fix a bug in 'make install' - fix a bug in libaudit feature-detection on certain distros" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf session: Fix infinite loop on invalid perf.data file perf tools: Fix installation of libexec components perf probe: Fix to find line information for probe list perf tools: Fix libaudit test perf stat: Set child_pid after perf_evlist__prepare_workload() perf tools: Add default handler for mmap2 events perf/x86: Clean up cap_user_time* setting perf: Fix perf_pmu_migrate_context
-
- 08 10月, 2013 4 次提交
-
-
由 Ingo Molnar 提交于
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: * The libaudit test was failing in some systems due to a unescaped newline, fix it so that the 'trace' tool can be built in such systems. * Fix installation of libexec components. * Add default handler for mmap2 events so that tools that don't explicitely define an MMAP2 handler don't crash, fix from David Ahern. * Fix to find line information for probe list, from Masami Hiramatsu. * Set child_pid after perf_evlist__prepare_workload(), fix from Namhyung Kim. * Fix infinite loop on invalid perf.data file, from Namhyung Kim. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Benjamin Herrenschmidt 提交于
irq_exit() is now called on the irq stack, which can trigger a switch to the softirq stack from the irq stack. If an interrupt happens at that point, we will not properly detect the re-entrancy and clobber the original return context on the irq stack. This fixes it. The side effect is to prevent all nesting from softirq stack to irq stack even in the "safe" case but it's simpler that way and matches what x86_64 does. Reported-by: NCédric Le Goater <clg@fr.ibm.com> Tested-by: NCédric Le Goater <clg@fr.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID fixes from Jiri Kosina: - fix for hidraw reference counting regression, by Manoj Chourasia - fix for minor number allocation for uhid, by David Herrmann - other small unsorted fixes / device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wiimote: fix FF deadlock HID: add Holtek USB ID 04d9:a081 SHARKOON DarkGlider HID: hidraw: close underlying device at removal of last reader HID: roccat: Fix "cannot create duplicate filename" problems HID: uhid: allocate static minor
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull Tile bugfixes from Chris Metcalf: "This fixes some serious issues with PREEMPT support, and a couple of smaller corner-case issues fixed in the last couple of weeks" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch: tile: re-use kbasename() helper tile: use a more conservative __my_cpu_offset in CONFIG_PREEMPT tile: ensure interrupts disabled for preempt_schedule_irq() tile: change lock initalization in hardwall tile: include: asm: use 'long long' instead of 'u64' for atomic64_t and its related functions
-
- 07 10月, 2013 13 次提交
-
-
由 David Herrmann 提交于
The input core has an internal spinlock that is acquired during event injection via input_event() and friends but also held during FF callbacks. That means, there is no way to share a lock between event-injection and FF handling. Unfortunately, this is what is required for wiimote state tracking and what we do with state.lock and input->lock. This deadlock can be triggered when using continuous data reporting and FF on a wiimote device at the same time. I takes me at least 30m of stress-testing to trigger it but users reported considerably shorter times (http://bpaste.net/show/132504/) when using some gaming-console emulators. The real problem is that we have two copies of internal state, one in the wiimote objects and the other in the input device. As the input-lock is not supposed to be accessed from outside of input-core, we have no other chance than offloading FF handling into a worker. This actually works pretty nice and also allows to implictly merge fast rumble changes into a single request. Due to the 3-layered workers (rumble+queue+l2cap) this might reduce FF responsiveness. Initial tests were fine so lets fix the race first and if it turns out to be too slow we can always handle FF out-of-band and skip the queue-worker. Cc: <stable@vger.kernel.org> # 3.11+ Reported-by: Thomas Schneider Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Sachin Kamat 提交于
'irq' was not released when clk_prepare_enable failed. Fix it. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "A couple of bux fixes, notable are the regression with ptrace vs restarting system calls and the patch for kdump to be able to copy from virtual memory" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix system call restart after inferior call s390: Allow vmalloc target buffers for copy_from_oldmem() s390/sclp: properly detect line mode console s390/kprobes: add exrl to list of prohibited opcodes s390/3270: fix return value check in tty3270_resize_work()
-
由 Linus Torvalds 提交于
-
由 Eric W. Biederman 提交于
Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: stable@vger.kernel.org Reviewed-by: NEric Sandeen <sandeen@redhat.com> Reported-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target fixes queued up for v3.12-rc4 code. The highlights include: - Make vhost/scsi tag percpu_ida_alloc() use GFP_ATOMIC - Allow sess_cmd_map allocation failure fallback to use vzalloc - Fix COMPARE_AND_WRITE se_cmd->data_length bug with FILEIO backends - Fixes for COMPARE_AND_WRITE callback recursive failure OOPs + non zero scsi_status bug - Make iscsi-target do acknowledgement tag release from RX context - Setup iscsi-target with extra (cmdsn_depth / 2) percpu_ida tags Also included is a iscsi-target patch CC'ed for v3.10+ that avoids legacy wait_for_task=true release during fast-past StatSN acknowledgement, and two other SRP target related patches that address long-standing issues that are CC'ed for v3.3+. Extra thanks to Thomas Glanzmann for his testing feedback with COMPARE_AND_WRITE + EXTENDED_COPY VAAI logic" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags iscsi-target: Perform release of acknowledged tags from RX context iscsi-target: Only perform wait_for_tasks when performing shutdown target: Fail on non zero scsi_status in compare_and_write_callback target: Fix recursive COMPARE_AND_WRITE callback failure target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size ib_srpt: always set response for task management target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failure vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tag ib_srpt: Destroy cm_id before destroying QP. target: Fix xop->dbl assignment in target_xcopy_parse_segdesc_02
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "Here is the slave dmanegine fixes. We have the fix for deadlock issue on imx-dma by Michael and Josh's edma config fix along with author change" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: imx-dma: fix callback path in tasklet dmaengine: imx-dma: fix lockdep issue between irqhandler and tasklet dmaengine: imx-dma: fix slow path issue in prep_dma_cyclic dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMA edma: Update author email address
-
- 06 10月, 2013 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "This is a small collection of fixes, including a regression fix from Liu Bo that solves rare crashes with compression on. I've merged my for-linus up to 3.12-rc3 because the top commit is only meant for 3.12. The rest of the fixes are also available in my master branch on top of my last 3.11 based pull" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: Fix crash due to not allocating integrity data for a bioset Btrfs: fix a use-after-free bug in btrfs_dev_replace_finishing Btrfs: eliminate races in worker stopping code Btrfs: fix crash of compressed writes Btrfs: fix transid verify errors when recovering log tree
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO fixes from Linus Walleij: "Two patches for the OMAP driver, dealing with setting up IRQs properly on the device tree boot path" * tag 'gpio-v3.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio/omap: auto-setup a GPIO when used as an IRQ gpio/omap: maintain GPIO and IRQ usage separately
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are none fixes for various USB driver problems. The majority are gadget/musb fixes, but there are some new device ids in here as well" * tag 'usb-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: add Intel Clovertrail pci id usb: gadget: s3c-hsotg: fix can_write limit for non-periodic endpoints usb: gadget: f_fs: fix error handling usb: musb: dsps: do not bind to "musb-hdrc" USB: serial: option: Ignore card reader interface on Huawei E1750 usb: musb: gadget: fix otg active status flag usb: phy: gpio-vbus: fix deferred probe from __init usb: gadget: pxa25x_udc: fix deferred probe from __init usb: musb: fix otg default state
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty fixes from Greg KH: "Here are two tty driver fixes for 3.12-rc4. One fixes the reported regression in the n_tty code that a number of people found recently, and the other one fixes an issue with xen consoles that broke in 3.10" * tag 'tty-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: xen/hvc: allow xenboot console to be used again tty: Fix pty master read() after slave closes
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging fixes from Greg KH: "Here are 4 tiny staging and iio driver fixes for 3.12-rc4. Nothing major, just some small fixes for reported issues" * tag 'staging-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: ni_65xx: (bug fix) confine insn_bits to one subdevice iio:magnetometer: Bugfix magnetometer default output registers iio: Remove debugfs entries in iio_device_unregister() iio: amplifiers: ad8366: Remove regulator_put
-
- 05 10月, 2013 5 次提交
-
-
由 Darrick J. Wong 提交于
When btrfs creates a bioset, we must also allocate the integrity data pool. Otherwise btrfs will crash when it tries to submit a bio to a checksumming disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 PGD 2305e4067 PUD 23063d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: btrfs scsi_debug xfs ext4 jbd2 ext3 jbd mbcache sch_fq_codel eeprom lpc_ich mfd_core nfsd exportfs auth_rpcgss af_packet raid6_pq xor zlib_deflate libcrc32c [last unloaded: scsi_debug] CPU: 1 PID: 4486 Comm: mount Not tainted 3.12.0-rc1-mcsum #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8802451c9720 ti: ffff880230698000 task.ti: ffff880230698000 RIP: 0010:[<ffffffff8111e28a>] [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 RSP: 0018:ffff880230699688 EFLAGS: 00010286 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000005f8445 RDX: 0000000000000001 RSI: 0000000000000010 RDI: 0000000000000000 RBP: ffff8802306996f8 R08: 0000000000011200 R09: 0000000000000008 R10: 0000000000000020 R11: ffff88009d6e8000 R12: 0000000000011210 R13: 0000000000000030 R14: ffff8802306996b8 R15: ffff8802451c9720 FS: 00007f25b8a16800(0000) GS:ffff88024fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000230576000 CR4: 00000000000007e0 Stack: ffff8802451c9720 0000000000000002 ffffffff81a97100 0000000000281250 ffffffff81a96480 ffff88024fc99150 ffff880228d18200 0000000000000000 0000000000000000 0000000000000040 ffff880230e8c2e8 ffff8802459dc900 Call Trace: [<ffffffff811b2208>] bio_integrity_alloc+0x48/0x1b0 [<ffffffff811b26fc>] bio_integrity_prep+0xac/0x360 [<ffffffff8111e298>] ? mempool_alloc+0x58/0x150 [<ffffffffa03e8041>] ? alloc_extent_state+0x31/0x110 [btrfs] [<ffffffff81241579>] blk_queue_bio+0x1c9/0x460 [<ffffffff8123e58a>] generic_make_request+0xca/0x100 [<ffffffff8123e639>] submit_bio+0x79/0x160 [<ffffffffa03f865e>] btrfs_map_bio+0x48e/0x5b0 [btrfs] [<ffffffffa03c821a>] btree_submit_bio_hook+0xda/0x110 [btrfs] [<ffffffffa03e7eba>] submit_one_bio+0x6a/0xa0 [btrfs] [<ffffffffa03ef450>] read_extent_buffer_pages+0x250/0x310 [btrfs] [<ffffffff8125eef6>] ? __radix_tree_preload+0x66/0xf0 [<ffffffff8125f1c5>] ? radix_tree_insert+0x95/0x260 [<ffffffffa03c66f6>] btree_read_extent_buffer_pages.constprop.128+0xb6/0x120 [btrfs] [<ffffffffa03c8c1a>] read_tree_block+0x3a/0x60 [btrfs] [<ffffffffa03caefd>] open_ctree+0x139d/0x2030 [btrfs] [<ffffffffa03a282a>] btrfs_mount+0x53a/0x7d0 [btrfs] [<ffffffff8113ab0b>] ? pcpu_alloc+0x8eb/0x9f0 [<ffffffff81167305>] ? __kmalloc_track_caller+0x35/0x1e0 [<ffffffff81176ba0>] mount_fs+0x20/0xd0 [<ffffffff81191096>] vfs_kern_mount+0x76/0x120 [<ffffffff81193320>] do_mount+0x200/0xa40 [<ffffffff81135cdb>] ? strndup_user+0x5b/0x80 [<ffffffff81193bf0>] SyS_mount+0x90/0xe0 [<ffffffff8156d31d>] system_call_fastpath+0x1a/0x1f Code: 4c 8d 75 a8 4c 89 6d e8 45 89 e0 4c 8d 6f 30 48 89 5d d8 41 83 e0 af 48 89 fb 49 83 c6 18 4c 89 7d f8 65 4c 8b 3c 25 c0 b8 00 00 <48> 8b 73 18 44 89 c7 44 89 45 98 ff 53 20 48 85 c0 48 89 c2 74 RIP [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 RSP <ffff880230699688> CR2: 0000000000000018 ---[ end trace 7a96042017ed21e2 ]--- Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Chris Mason 提交于
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French: "Small set of cifs fixes. Most important is Jeff's fix that works around disconnection problems which can be caused by simultaneous use of user space tools (starting a long running smbclient backup then doing a cifs kernel mount) or multiple cifs mounts through a NAT, and Jim's fix to deal with reexport of cifs share. I expect to send two more cifs fixes next week (being tested now) - fixes to address an SMB2 unmount hang when server dies and a fix for cifs symlink handling of Windows "NFS" symlinks" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] update cifs.ko version [CIFS] Remove ext2 flags that have been moved to fs.h [CIFS] Provide sane values for nlink cifs: stop trying to use virtual circuits CIFS: FS-Cache: Uncache unread pages in cifs_readpages() before freeing them
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fix from Bjorn Helgaas: "We merged what was intended to be an MMCONFIG cleanup, but in fact, for systems without _CBA (which is almost everything), it broke extended config space for domain 0 and it broke all config space for other domains. This reverts the change" * tag 'pci-v3.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at address zero"
-
由 Bjorn Helgaas 提交于
This reverts commit 07f9b61c. 07f9b61c was intended to be a cleanup that didn't change anything, but in fact, for systems without _CBA (which is almost everything), it broke extended config space for domain 0 and all config space for other domains. Reference: http://lkml.kernel.org/r/20131004011806.GE20450@dangermouse.emea.sgi.comReported-by: NHedi Berriche <hedi@sgi.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-