Introduce a new field into struct pcmcia_device named "resource" and of
type struct resource *, which contains the IO port ranges allocated for
this device. Memory window ranges and registration with the resource
trees will follow at a later date.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use pcmcia_read_config_byte and pcmcia_write_config_byte instead
of pcmcia_access_configuration_register.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Split up the central event handler for 16bit cards into three individual
functions.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Clean up the alloc_io_space() function by moving most of it to
the actual resource_ops. This allows for a bit less re-directions.
Future cleanups will follow, and will make up for the code
duplication currently present between rsrc_iodyn and rsrc_nonstatic
(which are hardly ever built at the same time anyway, therefore no
increase in built size).
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Setup the IRQ to be used by PCMCIA drivers already during the device
registration stage, making use of a new function pcmcia_setup_irq().
This will allow us to get rid of quite a lot of indirection in the
future.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

After a CIS update -- or the finalization of the resource database --,
proceed with the re-scanning or re-querying of PCMCIA cards only in
a separate thread to avoid deadlocks.
Tested-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

This avoids any sysfs-related deadlock (or lockdep warning), such
as reported at http://lkml.org/lkml/2010/1/17/88 .
Reported-by: NMing Lei <tom.leiming@gmail.com>
Tested-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

replace pcmcia_socket->lock and pcmcia_dev_list_lock by using the
per-socket "ops_mutex", as we do neither need different locks
nor a spinlock here.
Tested-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Move rsrc_mgr indirections only used by the pcmcia module to the
pcmcia module.
Tested-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

As PCMCIA is the only real user of CIS access functions, include
cistpl.c in the PCMCIA module, not in the PCMCIA & CardBus core
module.
Tested-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove rsrc_mgr indirections only used by pcmcia_resource.c
Tested-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

As release_resoure_db() used to be called only from one place, and
it's a two-line function, remove it.
Tested-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Do not lock the socket driver module on card insert, as
the PCMCIA core can handle a socket module removal, at least
if we add a call to socket_remove() on pccardd()'s shutdown.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

pcmcia_get_window() and pcmcia_get_mem_page() were only called from
pcmcia_ioctl.c. Therefore, move these functions to that file, and
remove the useless EXPORTs.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Logic changes based on top of the other patches:

This set of patches changed window_handle_t from being a pointer to an
unsigned long. The unsigned long is now a simple index into socket->win[].
Going from a pointer to unsigned long should leave the user space interface
unchanged unless I'm mistaken.

This change results in code that is less error prone and a user space
interface which is much cleaner and safer. A nice side effect is that we
are also are able to remove all members except one from window_t.

[ linux@dominikbrodowski.net:
	Update to 2.6.31. Also, a plain "index" to socket->win[] does not
	work, as several codepaths rely on "window_handle_t" being
	non-zero if used. Therefore, set the window_handle_t to the
	socket->win[] index + 1. ]

CC: netdev@vger.kernel.org
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

No logic changes, just pass struct pcmcia_socket to pcmcia_get_mem_page()

[linux@dominikbrodowski.net: update to 2.6.31]
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use the generic "dynamic debug" infrastructure instead of
CONIG_PCMCIA_DEBUG in the PCMCIA core (pcmcia.ko and pcmcia_core.ko). To
enable debugging, enable CONFIG_DYNAMIC_DEBUG, mount debugfs and

$ echo -n 'module pcmcia_core +p' > /sys/kernel/debug/dynamic_debug/control

for the complete module "pcmcia_core", for example. For more detailled
instructions, please see Documentation/dynamic-debug-howto.txt
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove the pcmcia_get_{first,next}_tuple() calls no longer needed by
(current) pcmcia device drivers.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

As a replacement to pcmcia_get_{first,next}_tuple() and
pcmcia_get_tuple_data(), three new -- and easier to use --
functions are added:

- pcmcia_get_tuple() to get the very first CIS entry of one
  type.

- pcmcia_loop_tuple() to loop over all CIS entries of one type.

- pcmcia_get_mac_from_cis() to read out the hardware MAC address
  from CISTPL_FUNCE.

Only a handful of drivers need these functions anyway, as most
CIS access is already handled by pcmcia_loop_config(), which
now shares the same backed (pccard_loop_tuple()) with
pcmcia_loop_tuple().

A pcmcia_get_mac_from_cis() bug noted by Komuro
<komurojun-mbn@nifty.com> has been fixed in this revision.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

pccard_read_tuple(), which is only used by the PCMCIA core, should
handle TUPLE_RETURN_COMMON more sensibly: If a specific function (which
may be 0) is requested, set tuple.Attributes = 0 as was done in all
PCMCIA drivers. If, however, BIND_FN_ALL is requested, return the
"common" tuple. As to the callers of pccard_read_tuple():

- All calls to pcmcia_validate_cis() had set the "function" parameter to
  BIND_FN_ALL. Therefore, remove the "function" parameter and make the
  parameter to pccard_read_tuple explicit.

- Calls to CISTPL_VERS_1 and CISTPL_MANFID now set BIND_FN_ALL. This was
  already the case for calls to CISTPL_LONGLINK_MFC.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Since we're just parsing the tuple being passed to this function, we don't
need any device-specific information.

Also, remove the call to pcmcia_validate_cis() from pcmciamtd.c, since it
is already called by the PCMCIA core.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

16-bit PCMCIA device handling function definitions are moved to ds.h,
internal definitions to cs_internal.h.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

The header file for use by (in-kernel) PCMCIA sockets deserved a major
cleanup. Some stuff only used by the pcmcia core modules was moved to
cs_internal.h
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Merge ds_internal.c into cs_internal.h.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Small cleanup to cs_internal.h.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

CS_BAD_TUPLE was used to denote a bad tuple being passed to the parse
function. Therefore, replace it with -EINVAL and a verbose message.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

With the PCMCIA ioctl being the only remaining user of
_get_configuration_info, move the function to pcmcia_ioctl.c
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use CONFIG_PCMCIA_DEBUG instead of DEBUG so that dev_dbg() and other tricks
work properly.

(includes bugfixes from and
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
)
Signed-off-by: NDominik Broodwski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Except for one debug message in a driver marked BROKEN, pcmcia_get_status is
only used by the ioctl. Therefore, move it to pcmcia_ioctl.c and unexport it.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

The code in include/pcmcia/bulkmem.h was only kept for compatibility reasons.
Therefore, move the remaining region_info_t definition to ds.h

[linux@dominikbrodowski.net: do not modify the IOCTL, move definition to
 ds.h, and update changelog]
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Make the PCMCIA core stop using class_interface to hide socket attribute
registration.  This removes the associated section mismatch warnings, and
helps get to the point where that mechanism can finally be removed.

Simplify that attribute registration by using an attribute_group.
This is a net shrink in object size.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.

Cc: <linux-pcmcia@lists.infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When overriding the CIS, re-start the configuration of the card from
scratch. Reported and debugged by Fabrice Bellet <fabrice@bellet.info>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Instead of the two status values struct pcmcia_device->p_state and state,
use descriptive bitfields. Most value-checking in drivers was invalid, as
the core now only calls the ->remove() (a.k.a. detach) function in case the
attachement _and_ configuration was successful.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

dev_link_t * and client_handle_t both mean struct pcmcai_device * by now.
Therefore, remove all such indirections.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove the inclusion of include/config.h as it isn't needed any longer.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>