- 23 5月, 2008 1 次提交
-
-
由 Roland McGrath 提交于
This works around bugs in older binutils' objcopy. The placement of these sections does not really matter, but it confused the buggy old BFD libraries. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 16 5月, 2008 3 次提交
-
-
由 Stephen Rothwell 提交于
Commit 140b932f ("Create modalias file in sysfs for of_platform bus") needs this to avoid breaking the sparc builds. Just move the code and add whitespace around some binary operators. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Scott Wood 提交于
This adds a function to put a 6xx/7xx/7xxx/83xx family CPU into sleep mode, and return after an interrupt has occurred. It expects to be called with interrupts disabled, and returns with interrupts disabled. Interrupts are enabled while the processor is asleep, but the interrupt that wakes the processor is not handled; it is still pending when this function returns. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This provides a way to defer processing of an interrupt that wakes the processor out of sleep mode. On 32-bit platforms that use an interrupt to wake the processor, we have to have interrupts enabled in hardware at the point where we go to sleep, otherwise the processor will never wake up. However, because interrupts are logically disabled at this point, we don't want to process the interrupt straight away. This is handled by setting the _TLF_SLEEPING flag. When we get an interrupt and _TLF_SLEEPING is set, we firstly clear the MSR_EE (external interrupt enable) bit in the saved MSR value, and secondly we then return to the address in the link register, like we do for _TLF_NAPPING, but without actually handling the interrupt. Note that this is handled somewhat differently on powerbooks, so this new code will only be used on non-Apple machines. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 15 5月, 2008 4 次提交
-
-
由 Ishizaki Kou 提交于
Fix following warnings: WARNING: arch/powerpc/platforms/cell/built-in.o(.devinit.text+0x9c): Section mismatch in reference from the function .cell_setup_phb() to the function .init.text:.iowa_register_bus() WARNING: arch/powerpc/platforms/cell/built-in.o(.devinit.text+0xa4): Section mismatch in reference from the function .cell_setup_phb() to the function .init.text:.io_workaround_init() Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 FUJITA Tomonori 提交于
With CONFIG_VIRT_CPU_ACCOUNTING disabled, I got the following error: linux-2.6/arch/powerpc/platforms/cell/spufs/file.c: In function 'spu_switch_log_notify': linux-2.6/arch/powerpc/platforms/cell/spufs/file.c:2542: error: implicit declaration of function 'get_tb' make[4]: *** [arch/powerpc/platforms/cell/spufs/file.o] Error 1 Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This changes vmemmap to use a different region (region 0xf) of the address space, and to configure the page size of that region dynamically at boot. The problem with the current approach of always using 16M pages is that it's not well suited to machines that have small amounts of memory such as small partitions on pseries, or PS3's. In fact, on the PS3, failure to allocate the 16M page backing vmmemmap tends to prevent hotplugging the HV's "additional" memory, thus limiting the available memory even more, from my experience down to something like 80M total, which makes it really not very useable. The logic used by my match to choose the vmemmap page size is: - If 16M pages are available and there's 1G or more RAM at boot, use that size. - Else if 64K pages are available, use that - Else use 4K pages I've tested on a POWER6 (16M pages) and on an iSeries POWER3 (4K pages) and it seems to work fine. Note that I intend to change the way we organize the kernel regions & SLBs so the actual region will change from 0xf back to something else at one point, as I simplify the SLB miss handler, but that will be for a later patch. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Luke Browning 提交于
If victim (not ctx) is in spu_run, add victim to rq. Signed-off-by: NLuke Browning <lukebrowning@us.ibm.com> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 14 5月, 2008 16 次提交
-
-
由 Michael Ellerman 提交于
Don't return void in pseries/iommu.c Make mce_data_buf static in pseries/ras.c Make things static in pseries/rtasd.c Make things static in pseries/setup.c vtermno may as well be static in platforms/pseries/lpar.c Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
The declaration for fw_feature_init() is in pseries.h and implemented in firmware.c, so the latter should include the former. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Make a few things static in lparcfg.c Make init and exit routines static in rtas_flash.c Make things static in rtas_pci.c Make some functions static in rtas.c Make fops static in rtas-proc.c Remove unneeded extern for do_gtod in smp.c Make clocksource_init() static in time.c Make last_tick_len and ticklen_to_xs static in time.c Move the declaration of the pvr per-cpu into smp.h Make kexec_smp_down() and kexec_stack static in machine_kexec_64.c Don't return void in arch_teardown_msi_irqs() in msi.c Move declaration of GregorianDay()into asm/time.h Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
This is a little messier than I'd like because xmon.h only exists on powerpc and we can't have a static inline and an extern declaration visible at the same time. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
The typdef for irqreturn_t was moved into its own header a while back, so there's no reason we can't move xmon_irq() into xmon.h now. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Some of the routines defined in mpic_msi.c are declared mpic.h, so the former should include the latter. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Somewhere along the way (e28f7faf, "Four level pagetables for ppc64") we ended up with duplicate definitions for pte_freelist_cur and pte_freelist_force_free. Somehow this compiles, but it would be better to just have one definition for each. The two definitions we end up with can be static too! Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
... instead of having extern declarations in a .c file. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Make two vmemmap helpers static in init_64.c Make stab variables static in stab.c Make psize defs static in hash_utils_64.c Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
... instead of having an extern declaration in a .c file. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Remi Machet 提交于
For each mv64360 entry in the OpenFirmware database, add the registration of an of_bus to take care of devices connected to the MV64x60 asynchronous devices controller. This change makes it possible for those devices to be detected by drivers that support the of_platform without having a custom call for each of them in the board file. Signed-off-by: NRemi Machet <rmachet@slac.stanford.edu> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kumar Gala 提交于
We use the low bits of regs->trap as flag bits. We already indicate critical and machine check level exceptions via this mechanism. Extend it to indicate debug level exceptions. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Roland McGrath 提交于
Replace TIF_RESTORE_SIGMASK with TLF_RESTORE_SIGMASK and define our own set_restore_sigmask() function. This saves the costly SMP-safe set_bit operation, which we do not need for the sigmask flag since TIF_SIGPENDING always has to be set too. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Roel Kluin 提交于
bitmap_find_free_region(), called by mpic_msi_alloc_hwirqs() may return signed, but hwirq is unsigned. A failed allocation remains unnoticed. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Roel Kluin 提交于
bitmap_find_free_region(), called by mpic_msi_alloc_hwirqs() may return signed, but hwirq is unsigned. A failed allocation remains unnoticed. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 13 5月, 2008 7 次提交
-
-
由 Jeremy McNicoll 提交于
The following adds local bus, flash and MTD partition nodes for sbc8548. As well, a compatible field for the soc node, so that of_platform_bus_probe() will pick it up. Something that is provided through this newly added epld node is the Hardware Revision which is now being utilized. Signed-off-by: NJeremy McNicoll <jeremy.mcnicoll@windriver.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Andy Fleming 提交于
Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Zhang Wei 提交于
Signed-off-by: NZhang Wei <wei.zhang@freescale.com> Cc: "Nelson, Shannon" <shannon.nelson@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
DIU platform code should not just write to the PIXIS' BRDCFG0 register, it should set and clear its own bits only, otherwise it will break firmware setup (in fact it breaks second uart). Also get rid of magic numbers in the related code. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
This patch adds device tree nodes for NOR and NAND flashes and places board-control node inside the localbus. defconfig and board file updated appropriately. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Andy Fleming 提交于
The 8568 MDS needs some configuration changes to the PHY in order to work properly. These are done in the firmware, normally, but Linux shouldn't need to rely on the firmware running such things (someone could disable the PHY support in the firmware to save space, for instance). Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
As of current mainline tree, TULIP driver is unusable on MPC8610HPCD boards. There is a patch[1] floating around (and also included in the BSP), which tries to heal the situation, though the ethernet is still unusable. Practically it takes ages to mount NFS filesystem: VFS: Mounted root (nfs filesystem). Freeing unused kernel memory: 180k init nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 OK nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 OK nfs: server 10.0.0.2 not responding, still trying So, instead of trying to add uli526x functionality into TULIP driver (which is already bloated enough), I fixed existing ULI526X driver and now it works perfectly well here. [1] http://www.bitshrine.org/gpp/0024-MPC8610-ETH-Lyra-native-ethernet.txtSigned-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 12 5月, 2008 3 次提交
-
-
由 Paul Mackerras 提交于
This fixes a few more miscellaneous compile problems with ARCH=ppc. 1. Don't compile devres.c on ARCH=ppc, it doesn't have ioremap_flags. 2. Include <asm/irq.h> in setup.c for the __DO_IRQ_CANON definition. 3. Include <linux/proc_fs.h> in residual.c for the definition of create_proc_read_entry. 4. Fix xchg_ptr to be a static inline to eliminate a compiler warning. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Segher Boessenkool 提交于
arch/ppc doesn't have prom_init.o (anymore). Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
Commit 76bc080e ("POWERPC] Make default cputable entries reflect selected CPU family") added default entries for the e200 and e500 families, but missed a closing brace on those entries, as pointed out by David Gibson. This adds the closing braces. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 5月, 2008 6 次提交
-
-
由 Nate Case 提交于
This printk() appears twice in the same function. Only the latter one in the inval_range: section appears to be legitimate. Signed-off-by: NNate Case <ncase@xes-inc.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Huang Weiyi 提交于
Remove duplicate #include of <asm/prom.h> in arch/powerpc/kernel/btext.c. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This moves lockdep_init() to before udbg_early_init() as the later can call things that acquire spinlocks etc... This also makes printk safer to use earlier. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
When debugging early boot problems, it's common to sprinkle printk's all over the place. However, on 64-bit powerpc, this can lead to memory corruption if done too early due to the PACA pointer and lockdep core not being initialized. This adds some comments to early_setup() that document when it is safe to do so in order to save time for whoever has to debug that stuff next. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
When doing lockdep, I had two patches to initialize paca->_current early, one bogus, and one correct. Unfortunately both got merged as the bad one ended up being part of the main lockdep patch by mistake. This causes memory corruption at boot. This removes the offending code. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
Changes the cputable so that various CPU families that have an exclusive CONFIG_ option have a more sensible default entry to use if the specific processor hasn't been identified. This makes the kernel more generally useful when booted on an unknown PVR for things like new 4xx variants. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-