Optimize the space and leave plenty of room for further flags.
Signed-off-by: NFrederic Weisbecker <frederic@kernel.org>
[ rjw: Do not use __this_cpu_read() to access tick_stopped and add
       got_idle_tick to avoid overloading inidle ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

If the tick isn't stopped, the target residency of the state selected
by the menu governor may be greater than the actual time to the next
tick and that means lost energy.

To avoid that, make tick_nohz_get_sleep_length() return the current
time to the next event (before stopping the tick) in addition to the
estimated one via an extra pointer argument and make menu_select()
use that value to refine the state selection when necessary.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>

In order to address the issue with short idle duration predictions
by the idle governor after the scheduler tick has been stopped,
reorder the code in cpuidle_idle_call() so that the governor idle
state selection runs before tick_nohz_idle_go_idle() and use the
"nohz" hint returned by cpuidle_select() to decide whether or not
to stop the tick.

This isn't straightforward, because menu_select() invokes
tick_nohz_get_sleep_length() to get the time to the next timer
event and the number returned by the latter comes from
__tick_nohz_idle_stop_tick().  Fortunately, however, it is possible
to compute that number without actually stopping the tick and with
the help of the existing code.

Namely, tick_nohz_get_sleep_length() can be made call
tick_nohz_next_event(), introduced earlier, to get the time to the
next non-highres timer event.  If that happens, tick_nohz_next_event()
need not be called by __tick_nohz_idle_stop_tick() again.

If it turns out that the scheduler tick cannot be stopped going
forward or the next timer event is too close for the tick to be
stopped, tick_nohz_get_sleep_length() can simply return the time to
the next event currently programmed into the corresponding clock
event device.

In addition to knowing the return value of tick_nohz_next_event(),
however, tick_nohz_get_sleep_length() needs to know the time to the
next highres timer event, but with the scheduler tick timer excluded,
which can be computed with the help of hrtimer_get_next_event().

That minimum of that number and the tick_nohz_next_event() return
value is the total time to the next timer event with the assumption
that the tick will be stopped.  It can be returned to the idle
governor which can use it for predicting idle duration (under the
assumption that the tick will be stopped) and deciding whether or
not it makes sense to stop the tick before putting the CPU into the
selected idle state.

With the above, the sleep_length field in struct tick_sched is not
necessary any more, so drop it.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=199227Reported-by: NDoug Smythies <dsmythies@telus.net>
Reported-by: NThomas Ilsche <thomas.ilsche@tu-dresden.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NFrederic Weisbecker <frederic@kernel.org>

The next set of changes will need to compute the time to the next
hrtimer event over all hrtimers except for the scheduler tick one.

To that end introduce a new helper function,
hrtimer_next_event_without(), for computing the time until the next
hrtimer event over all timers except for one and modify the underlying
code in __hrtimer_next_event_base() to prepare it for being called by
that new function.

No intentional changes in functionality.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NFrederic Weisbecker <frederic@kernel.org>

In order to address the issue with short idle duration predictions
by the idle governor after the scheduler tick has been stopped, split
tick_nohz_stop_sched_tick() into two separate routines, one computing
the time to the next timer event and the other simply stopping the
tick when the time to the next timer event is known.

Prepare these two routines to be called separately, as one of them
will be called by the idle governor in the cpuidle_select() code
path after subsequent changes.

Update the former callers of tick_nohz_stop_sched_tick() to use
the new routines, tick_nohz_next_event() and tick_nohz_stop_tick(),
instead of it and move the updates of the sleep_length field in
struct tick_sched into __tick_nohz_idle_stop_tick() as it doesn't
need to be updated anywhere else.

There should be no intentional visible changes in functionality
resulting from this change.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NFrederic Weisbecker <frederic@kernel.org>

Add a new pointer argument to cpuidle_select() and to the ->select
cpuidle governor callback to allow a boolean value indicating
whether or not the tick should be stopped before entering the
selected state to be returned from there.

Make the ladder governor ignore that pointer (to preserve its
current behavior) and make the menu governor return 'false" through
it if:
 (1) the idle exit latency is constrained at 0, or
 (2) the selected state is a polling one, or
 (3) the expected idle period duration is within the tick period
     range.

In addition to that, the correction factor computations in the menu
governor need to take the possibility that the tick may not be
stopped into account to avoid artificially small correction factor
values.  To that end, add a mechanism to record tick wakeups, as
suggested by Peter Zijlstra, and use it to modify the menu_update()
behavior when tick wakeup occurs.  Namely, if the CPU is woken up by
the tick and the return value of tick_nohz_get_sleep_length() is not
within the tick boundary, the predicted idle duration is likely too
short, so make menu_update() try to compensate for that by updating
the governor statistics as though the CPU was idle for a long time.

Since the value returned through the new argument pointer of
cpuidle_select() is not used by its caller yet, this change by
itself is not expected to alter the functionality of the code.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>

Since the subsequent changes will need a TICK_USEC definition
analogous to TICK_NSEC, rename the existing TICK_USEC as
USER_TICK_USEC, update its users and redefine TICK_USEC
accordingly.
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NFrederic Weisbecker <frederic@kernel.org>

Make cpuidle_idle_call() decide whether or not to stop the tick.

First, the cpuidle_enter_s2idle() path deals with the tick (and with
the entire timekeeping for that matter) by itself and it doesn't need
the tick to be stopped beforehand.

Second, to address the issue with short idle duration predictions
by the idle governor after the tick has been stopped, it will be
necessary to change the ordering of cpuidle_select() with respect
to tick_nohz_idle_stop_tick().  To prepare for that, put a
tick_nohz_idle_stop_tick() call in the same branch in which
cpuidle_select() is called.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NFrederic Weisbecker <frederic@kernel.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>

Push the decision whether or not to stop the tick somewhat deeper
into the idle loop.

Stopping the tick upfront leads to unpleasant outcomes in case the
idle governor doesn't agree with the nohz code on the duration of the
upcoming idle period.  Specifically, if the tick has been stopped and
the idle governor predicts short idle, the situation is bad regardless
of whether or not the prediction is accurate.  If it is accurate, the
tick has been stopped unnecessarily which means excessive overhead.
If it is not accurate, the CPU is likely to spend too much time in
the (shallow, because short idle has been predicted) idle state
selected by the governor [1].

As the first step towards addressing this problem, change the code
to make the tick stopping decision inside of the loop in do_idle().
In particular, do not stop the tick in the cpu_idle_poll() code path.
Also don't do that in tick_nohz_irq_exit() which doesn't really have
enough information on whether or not to stop the tick.

Link: https://marc.info/?l=linux-pm&m=150116085925208&w=2 # [1]
Link: https://tu-dresden.de/zih/forschung/ressourcen/dateien/projekte/haec/powernightmares.pdfSuggested-by: NFrederic Weisbecker <frederic@kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NFrederic Weisbecker <frederic@kernel.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>

Prepare the scheduler tick code for reworking the idle loop to
avoid stopping the tick in some cases.

The idea is to split the nohz idle entry call to decouple the idle
time stats accounting and preparatory work from the actual tick stop
code, in order to later be able to delay the tick stop once we reach
more power-knowledgeable callers.

Move away the tick_nohz_start_idle() invocation from
__tick_nohz_idle_enter(), rename the latter to
__tick_nohz_idle_stop_tick() and define tick_nohz_idle_stop_tick()
as a wrapper around it for calling it from the outside.

Make tick_nohz_idle_enter() only call tick_nohz_start_idle() instead
of calling the entire __tick_nohz_idle_enter(), add another wrapper
disabling and enabling interrupts around tick_nohz_idle_stop_tick()
and make the current callers of tick_nohz_idle_enter() call it too
to retain their current functionality.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NFrederic Weisbecker <frederic@kernel.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>

This keeps it in line with the SYSCALL_DEFINEx() / COMPAT_SYSCALL_DEFINEx()
calling convention.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Shuffle the cond_syscall() entries in kernel/sys_ni.c around so that they
are kept in the same order as in include/uapi/asm-generic/unistd.h. For
better structuring, add the same comments as in that file, but keep a few
additional comments and extend the commentary where it seems useful.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Using this helper allows us to avoid the in-kernel call to the
sys_setsid() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it
uses the same calling convention as sys_setsid().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Using this helper allows us to avoid the in-kernel calls to the
sys_unshare() syscall. The ksys_ prefix denotes that this function is meant
as a drop-in replacement for the syscall. In particular, it uses the same
calling convention as sys_unshare().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Using this helper allows us to avoid the in-kernel calls to the
sys_sync() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it
uses the same calling convention as sys_sync().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Using the fs-interal do_fchownat() wrapper allows us to get rid of
fs-internal calls to the sys_fchownat() syscall.

Introducing the ksys_fchown() helper and the ksys_{,}chown() wrappers
allows us to avoid the in-kernel calls to the sys_{,l,f}chown() syscalls.
The ksys_ prefix denotes that these functions are meant as a drop-in
replacement for the syscalls. In particular, they use the same calling
convention as sys_{,l,f}chown().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

While sys32_quotactl() is only needed on x86, it can use the recommended
COMPAT_SYSCALL_DEFINEx() machinery for its setup.
Acked-by: NJan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Move compat_sys_move_pages() to mm/migrate.c and make it call a newly
introduced helper -- kernel_move_pages() -- instead of the syscall.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Move compat_sys_migrate_pages() to mm/mempolicy.c and make it call a newly
introduced helper -- kernel_migrate_pages() -- instead of the syscall.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Using the sched-internal do_sched_yield() helper allows us to get rid of
the sched-internal call to the sys_sched_yield() syscall.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Using these helpers allows us to avoid the in-kernel calls to these
syscalls: sys_setregid(), sys_setgid(), sys_setreuid(), sys_setuid(),
sys_setresuid(), sys_setresgid(), sys_setfsuid(), and sys_setfsgid().

The ksys_ prefix denotes that these function are meant as a drop-in
replacement for the syscall. In particular, they use the same calling
convention.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Using this helper allows us to avoid the in-kernel call to the
compat_sys_sigaltstack() syscall.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Using the do_getpgid() helper removes an in-kernel call to the
sys_getpgid() syscall.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

sys_futex() is a wrapper to do_futex() which does not modify any
values here:

- uaddr, val and val3 are kept the same

- op is masked with FUTEX_CMD_MASK, but is always set to FUTEX_WAKE.
  Therefore, val2 is always 0.

- as utime is set to NULL, *timeout is NULL

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

do_kexec_load() can be called directly by compat_sys_kexec() as long as
the same parameters checks are completed which are currently handled
(also) by sys_kexec(). Therefore, move those to kexec_load_check(),
call that newly introduced helper function from both sys_kexec() and
compat_sys_kexec(), and duplicate the remaining code from sys_kexec()
in compat_sys_kexec().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Eric Biederman <ebiederm@xmission.com>
Cc: kexec@lists.infradead.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

A similar but not fully equivalent code path is already open-coded
three times (in sys_rt_sigpending and in the two compat stubs), so
do it a fourth time here.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

All call sites of sys_wait4() set *rusage to NULL. Therefore, there is
no need for the copy_to_user() handling of *rusage, and we can use
kernel_wait4() directly.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.netAcked-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

For a rwsem, locking can either be exclusive or shared. The corresponding
exclusive or shared unlock must be used. Otherwise, the protected data
structures may get corrupted or the lock may be in an inconsistent state.

In order to detect such anomaly, a new configuration option DEBUG_RWSEMS
is added which can be enabled to look for such mismatches and print
warnings that that happens.
Signed-off-by: NWaiman Long <longman@redhat.com>
Acked-by: NDavidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1522445280-7767-2-git-send-email-longman@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This file is used both for setting the wakeup device without kernel
command line as well as for actually waking the system (when appropriate
swap header is in place).

To avoid confusion on incorrect logs in system log downgrade the
message to debug and make it clearer.
Signed-off-by: NMario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently the only way to specify a hibernate offset for a
swap file is on the kernel command line.

Add a new /sys/power/resume_offset that lets userspace
specify the offset and disk to use when initiating a hibernate
cycle.
Signed-off-by: NMario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This is a cosmetic patch that deals with the address filter structure's
ambiguous fields 'filter' and 'range'. The former stands to mean that the
filter's *action* should be to filter the traces to its address range if
it's set or stop tracing if it's unset. This is confusing and hard on the
eyes, so this patch replaces it with 'action' enum. The 'range' field is
completely redundant (meaning that the filter is an address range as
opposed to a single address trigger), as we can use zero size to mean the
same thing.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180329120648.11902-1-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The lock debug output in print_lock() has a few shortcomings:

 - It prints the hlock->acquire_ip field in %px and %pS format. That's
   redundant information.

 - It lacks information about the lock object itself. The lock class is
   not helpful to identify a particular instance of a lock.

Change the output so it prints:

 - hlock->instance to allow identification of a particular lock instance.

 - only the %pS format of hlock->ip_acquire which is sufficient to decode
   the actual code line with faddr2line.

The resulting output is:

3 locks held by a.out/31106:
#0: 00000000b0f753ba (&mm->mmap_sem){++++}, at: copy_process.part.41+0x10d5/0x1fe0
#1: 00000000ef64d539 (&mm->mmap_sem/1){+.+.}, at: copy_process.part.41+0x10fe/0x1fe0
#2: 00000000b41a282e (&mapping->i_mmap_rwsem){++++}, at: copy_process.part.41+0x12f2/0x1fe0

[ tglx: Massaged changelog ]
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: linux-mm@kvack.org
Cc: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/201803271941.GBE57310.tVSOJLQOFFOHFM@I-love.SAKURA.ne.jp

In -RT task_blocks_on_rt_mutex() may return with -EAGAIN due to
(->pi_blocked_on == PI_WAKEUP_INPROGRESS) before it added itself as a
waiter. In such a case remove_waiter() must not be called because without a
waiter it will trigger the BUG_ON() statement.

This was initially reported by Yimin Deng. Thomas Gleixner fixed it then
with an explicit check for waiters before calling remove_waiter().

Instead of an explicit NULL check before calling rt_mutex_top_waiter() make
the function return NULL if there are no waiters. With that fixed the now
pointless NULL check is removed from rt_mutex_slowlock().
Reported-and-debugged-by: NYimin Deng <yimin11.deng@gmail.com>
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/CAAh1qt=DCL9aUXNxanP5BKtiPp3m+qj4yB+gDohhXPVFCxWwzg@mail.gmail.com
Link: https://lkml.kernel.org/r/20180327121438.sss7hxg3crqy4ecd@linutronix.de

Annoyingly, modify_user_hw_breakpoint() unnecessarily complicates the
modification of a breakpoint - simplify it and remove the pointless
local variables.

Also update the stale Docbook while at it.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

No changes in refcount semantics, use DEFINE_STATIC_KEY_FALSE()
for initialization and replace:

  static_key_slow_inc|dec()   =>   static_branch_inc|dec()
  static_key_false()          =>   static_branch_unlikely()
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Link: http://lkml.kernel.org/r/20180326210929.5244-4-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

When the SCHED_DEADLINE scheduling class increases the CPU utilization, it
should not wait for the rate limit, otherwise it may miss some deadline.

Tests using rt-app on Exynos5422 with up to 10 SCHED_DEADLINE tasks have
shown reductions of even 10% of deadline misses with a negligible
increase of energy consumption (measured through Baylibre Cape).
Signed-off-by: NClaudio Scordino <claudio@evidence.eu.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/1520937340-2755-1-git-send-email-claudio@evidence.eu.com

In Documentation/trace/kprobetrace.txt, it says

 @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)

However, the parser doesn't parse minus offset correctly, since
commit 2fba0c88 ("tracing/kprobes: Fix probe offset to be
unsigned") drops minus ("-") offset support for kprobe probe
address usage.

This fixes the traceprobe_split_symbol_offset() to parse minus
offset again with checking the offset range, and add a minus
offset check in kprobe probe address usage.

Link: http://lkml.kernel.org/r/152129028983.31874.13419301530285775521.stgit@devbox

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 2fba0c88 ("tracing/kprobes: Fix probe offset to be unsigned")
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The clockid argument of clockid_to_kclock() comes straight from user space
via various syscalls and is used as index into the posix_clocks array.

Protect it against spectre v1 array out of bounds speculation. Remove the
redundant check for !posix_clock[id] as this is another source for
speculation and does not provide any advantage over the return
posix_clock[id] path which returns NULL in that case anyway.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802151718320.1296@nanos.tec.linutronix.de

The current check statement in BPF syscall will do a capability check
for CAP_SYS_ADMIN before checking sysctl_unprivileged_bpf_disabled. This
code path will trigger unnecessary security hooks on capability checking
and cause false alarms on unprivileged process trying to get CAP_SYS_ADMIN
access. This can be resolved by simply switch the order of the statement
and CAP_SYS_ADMIN is not required anyway if unprivileged bpf syscall is
allowed.
Signed-off-by: NChenbo Feng <fengc@google.com>
Acked-by: NLorenzo Colitti <lorenzo@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Commit 4bebdc7a ("bpf: add helper bpf_perf_prog_read_value")
added helper bpf_perf_prog_read_value so that perf_event type program
can read event counter and enabled/running time.
This commit, however, introduced a bug which allows this helper
for tracepoint type programs. This is incorrect as bpf_perf_prog_read_value
needs to access perf_event through its bpf_perf_event_data_kern type context,
which is not available for tracepoint type program.

This patch fixed the issue by separating bpf_func_proto between tracepoint
and perf_event type programs and removed bpf_perf_prog_read_value
from tracepoint func prototype.

Fixes: 4bebdc7a ("bpf: add helper bpf_perf_prog_read_value")
Reported-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>