If the kernel is relocated at boot time, kallsyms will not match data
recorded previously.

That does not matter for modules because they are corrected anyway.  It
also does not matter if vmlinux is being used for symbols. But if perf
tools has only kallsyms then the symbols will not match.

Fix by applying the delta gained by comparing the old and current
addresses of the relocation reference symbol.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Tested-by: NJiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1391004884-10334-9-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Use of kcore is predicated upon it matching the recorded data.  If the
kernel has been relocated at boot time (i.e. since the data was
recorded) then do not use kcore.

Note that it is possible to make a copy of kcore at the time the data is
recorded using 'perf buildid-cache'.  Then the perf tools will use the
copy because it does match the data.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Tested-by: NJiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1391004884-10334-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Several areas already used this technique, so do some audit to
consistently use it elsewhere.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9sbere0kkplwe45ak6rk4a1f@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For the frequent idiom of:

   free(ptr);
   ptr = NULL;

Make it expect a pointer to the pointer being freed, so that it becomes
clear at first sight that the variable being freed is being modified.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pfw02ezuab37kha18wlut7ir@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It was called "data_type", but in this context "data" is way too vague,
it could mean the "data" ELF segment, or something else.

Since we have dso__read_binary_type_filename() and the values this field
receives are all DSO__BINARY_TYPE_<FOO> we may as well call it
"binary_type" for consistency sake.

It also seems more appropriate since it determines if we can do
operations like annotation and DWARF unwinding, that needs more than
just the symtab, requiring access to ELF text segments, CFI ELF
sections, etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2lkbqrn23uc2uvnn9w9in379@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Using dso__binary_type_file() make it look like this function will
return a file, not just its filename, so rename it to:

	dso__read_binary_type_filename()

to make its purpose clear, just like we have:

	dso__read_running_kernel_build_id()

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vkf3upzrfrxtr01wueej4xw4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Eventually this should be useful to other tools/ living utilities.

For now don't try to build any .a, just trying the minimal approach of
separating existing code into multiple .c files that can then be
included wherever they are needed, using whatever build machinery
already in place.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pfa8i5zpf4bf9rcccryi0lt3@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Same reason as for dso->short_name, it may point to a const string, and
in most places it is treated as const, i.e. it is just accessed for
using its contents as a key or to show it on reports.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nf7mxf33zt5qw207pbxxryot@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instead of expecting callers to set this member accodingly so that later
at dso destruction it can, if needed, be correctly free()d, make it a
requirement by passing it as a parameter to dso__set_long_name.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-na7t1tqim22vuqkt4zq5n4ri@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is a preparatory patch to do with dso__set_long_name what was done
with the short name variant.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mb7eqhkyejq1qcf3p22wz2x7@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So we now have:

   dso->short_name
   dso->short_name_len
   dso->short_name_allocated

Ditto for the 'long  variants. To more quickly grasp what they refer to.
Suggested-by: NIngo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nu228f8vlp9w0lr7c0q77dqi@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently, lookup of an ip's source file name and line number is done
using the dso file name.

Instead retain the file name used to lookup the dso's symbols and use
that.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-6-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The logic was not looking in the buildid cache for kcore if the host
kernel buildid did not match the recorded kernel buildid.

This affects the non-live case i.e. the kernel has changed and we are
looking at a special copy of kcore that we placed in the buildid cache
(using "perf buildid-cache -v -k /proc/kcore") when the data was
recorded.

After this fix kernel symbols get resolved/annotated correctly.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1385471964-4037-1-git-send-email-adrian.hunter@intel.com
[ Added further explanation extracted from conversation between Ingo & Adrian on lkml ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Used in upcoming patches (perf sched timehist command).
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384806771-2945-6-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allows list of idle symbols to be leveraged by other commands, such as
the upcoming timehist command.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384806771-2945-3-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In function symbols__fixup_duplicate(), while duplicated symbols are
found, only the rb_node is removed from the tree. The symbol structures
themself are ignored.  Then, these memory areas are lost.
Signed-off-by: NChenggang Qin <chenggang.qcg@taobao.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Yanmin Zhang <yanmin.zhang@intel.com>
Link: http://lkml.kernel.org/r/1381451279-4109-3-git-send-email-chenggang.qin@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

kcore can be used to view the running kernel object code.  However,
kcore changes as modules are loaded and unloaded, and when the kernel
decides to modify its own code.  Consequently it is useful to create a
copy of kcore at a particular time.  Unlike vmlinux, kcore is not unique
for a given build-id.  And in addition, the kallsyms and modules files
are also needed.  The tool therefore creates a directory:

	~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh>

which contains: kcore, kallsyms and modules.

Note that the copied kcore contains only code sections.  See the
kcore_copy() function for how that is determined.

The tool will not make additional copies of kcore if there is already
one with the same modules at the same addresses.

Currently, perf tools will not look for kcore in the cache.  That is
addressed in another patch.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com
[ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12,
  use at least one member initializer when initializing a struct to
  zeros, also to fix the build on f12 ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When no vmlinux is found, tools will use kallsyms and, if possible,
kcore.  Add the ability to find kcore in the build-id cache.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before using kcore we need to check that modules are in memory at the
same addresses that they were when data was recorded.

This is done because, while we could remap symbols to different
addresses, the object code linkages would still be different which would
provide an erroneous view of the object code.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381320078-16497-2-git-send-email-adrian.hunter@intel.com
[ Rename basename to base_name to avoid shadowing libgen's basename in fedora 12 ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Make a separate function to parse /proc/modules so that it can be
reused.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381221956-16699-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Running "perf top" on a machine with possibly invalid or non-matching
vmlinux at the various places results in no symbol resolving despite
/proc/kallsyms being present and valid.

Add a new option --ignore-vmlinux to explicitly indicate that we do not
want to use these kernels and just use what we have (kallsyms).
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/20130914083259.GA3418@1wt.euSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

On OpenEmbedded the symbol files are located under a .debug folder on
the same folder as the binary file.

This patch adds support for such files.

Without this patch on perf top you can see:

no symbols found in /usr/lib/gstreamer-1.0/libtheoraenc.so.1.1.2, maybe
install a debug package?

84.56%  libtheoraenc.so.1.1.2       [.] 0x000000000000b346

With this patch symbols are shown:

19.06%  libtheoraenc.so.1.1.2       [.] oc_int_frag_satd_thresh_mmxext
9.76%   libtheoraenc.so.1.1.2       [.] oc_analyze_mb_mode_luma
5.58%   libtheoraenc.so.1.1.2       [.] oc_qii_state_advance
4.84%   libtheoraenc.so.1.1.2       [.] oc_enc_tokenize_ac
...
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1379512574-25912-1-git-send-email-ricardo.ribalda@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For some dsos (e.g., libc, libpthread, kernel modules) the symbol offset
is huge. e.g.,

qemu-kvm 17238/17242 [007] 762235.640311:
    ffffffff816288a1 __schedule+0x451 ([kernel.kallsyms])
    ffffffff81629609 schedule+0x29 ([kernel.kallsyms])
    ffffffffa00a6ded kvm_vcpu_block+0xffffffffa00a106d (/lib/modules/3.11.0-rc1+/kernel/arch/x86/kvm/kvm.ko)
    ffffffffa00bae6b kvm_arch_vcpu_ioctl_run+0xffffffffa00a118b (/lib/modules/3.11.0-rc1+/kernel/arch/x86/kvm/kvm.ko)
    ffffffffa00a4d7a kvm_vcpu_ioctl+0xffffffffa00a141a (/lib/modules/3.11.0-rc1+/kernel/arch/x86/kvm/kvm.ko)
    ffffffff811a7bdb do_vfs_ioctl+0x8b ([kernel.kallsyms])
    ffffffff811a80c1 sys_ioctl+0x91 ([kernel.kallsyms])
    ffffffff81633182 system_call+0x72 ([kernel.kallsyms])
        7f882a97af27 __GI___ioctl+0x7f882a891007 (/lib64/libc-2.14.90.so)
           100000002 [unknown] ([unknown])

It seems to be maps with a non-0 start. Taking that into account the
offsets are correct:

qemu-kvm 17238/17242 [007] 762235.640311:
    ffffffff816288a1 __schedule+0x451 ([kernel.kallsyms])
    ffffffff81629609 schedule+0x29 ([kernel.kallsyms])
    ffffffffa00a6ded kvm_vcpu_block+0x6d (/lib/modules/3.11.0-rc1+/kernel/arch/x86/kvm/kvm.ko)
    ffffffffa00bae6b kvm_arch_vcpu_ioctl_run+0x18b (/lib/modules/3.11.0-rc1+/kernel/arch/x86/kvm/kvm.ko)
    ffffffffa00a4d7a kvm_vcpu_ioctl+0x41a (/lib/modules/3.11.0-rc1+/kernel/arch/x86/kvm/kvm.ko)
    ffffffff811a7bdb do_vfs_ioctl+0x8b ([kernel.kallsyms])
    ffffffff811a80c1 sys_ioctl+0x91 ([kernel.kallsyms])
    ffffffff81633182 system_call+0x72 ([kernel.kallsyms])
        7f882a97af27 __GI___ioctl+0x7 (/lib64/libc-2.14.90.so)
           100000002 [unknown] ([unknown])
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1375026512-45826-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In the absence of vmlinux, perf tools uses kallsyms for symbols.  If the
user has access, now also map to /proc/kcore.

The dso data_type is now set to either DSO_BINARY_TYPE__KCORE or
DSO_BINARY_TYPE__GUEST_KCORE as approprite.

This patch breaks the "vmlinux symtab matches kallsyms" test.  That is
fixed in a following patch.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-8-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The new "object code reading" test shows that it is not possible to read
object code from kernel modules.  That is because the mappings do not
map to the dsos.  This patch fixes that.

This involves identifying and flagging relocatable (ELF type ET_REL)
files (e.g. kernel modules) for symbol adjustment and updating
map__rip_2objdump() accordingly.  The kmodule parameter of
dso__load_sym() is taken into use and the module map altered to map to
the dso.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The new "object code reading" test shows that it is not possible to read
object code from vmlinux.  That is because the mappings do not map to
the dso.  This patch fixes that.

A side-effect of changing the kernel map is that the "reloc" offset must
be taken into account.  As a result of that separate map functions for
relocation are no longer needed.

Also fixing up the maps to match the symbols no longer makes sense and
so is not done.

The vmlinux dso data_type is now set to either DSO_BINARY_TYPE__VMLINUX
or DSO_BINARY_TYPE__GUEST_VMLINUX as approprite, which enables the
correct file name to be determined by dso__binary_type_file().

This patch breaks the "vmlinux symtab matches kallsyms" test.  That is
fixed in a following patch.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When removing duplicate symbols, prefer to remove syscall aliases
starting with SyS or compat_SyS.

A side-effect of that is that it results in slightly improved results
for the "vmlinux symtab matches kallsyms" test.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-6-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If an user gives both of --symfs and --vmlinux option, the vmlinux will
be searched under the symfs directory.  This is somewhat confusing since
vmlinux often lives in kernel build directory or somewhere other than
user space binaries.

So it'd be better not adding symfs prefix for a vmlinux if it has an
absolute pathname.
Reported-by: NKwanghyun Yoo <ykh815.yoo@lge.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374048495-3643-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently we have symbol_conf.exclude_other being set as true every time
so the -x/--exclude-other has nothing to do.

Also we have no way to see the data with symbol_conf.exclude_other being
false which is useful sometimes.

Fixing it by making symbol_conf.exclude_other false by default.

1) Example without -x option:

  $ perf report -i perf.data.delete -p perf_session__delete -s parent

  +  99.91%  [other]
  +   0.08%  perf_session__delete
  +   0.00%  perf_session__delete_dead_threads
  +   0.00%  perf_session__delete_threads

2) Example with -x option:

  $ ./perf report -i perf.data.delete -p perf_session__delete -s parent -x

  +  96.22%  perf_session__delete
  +   1.89%  perf_session__delete_dead_threads
  +   1.89%  perf_session__delete_threads

In Example 1) we get the sorted out data together with the rest
"[other]". This could help us estimate how much time we spent in the
sorted data.

In Example 2) the total is just the sorted data.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-sg8fvu0fyqohf9ur9l38lhkw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's sometimes useful to see undemangled raw symbol name for example
other tools using the perf output to do manipulation of binaries.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Suggested-by: NWilliam Cohen <wcohen@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=55571
Link: http://lkml.kernel.org/r/1364203098-17741-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Needs to be marked allocated so memory can be freed when dso is deleted.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1358185650-90848-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Memory is currently leaked on some paths.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1358185607-90799-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Mechanical, no functional changes.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9ib6qtqge1jmms2luwu4udbx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We had that 'with_hits' filter to show just the build ids for DSOs that
had samples, make that generic so that we can use it in the upcoming
buildid-cache --missing feature, to show just the build ids that are not
in the cache.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9nfesdfpnx7zp96yn3tmfbx0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This time out of map.[ch] mostly, just code move plus a buch of 'self'
removal, using machine or machines instead.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j1vtux3vnu6wzmrjutpxnjcz@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving dso_* related functions into dso object.

Keeping symbol loading related functions still in the symbol object as
it seems more convenient.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-6-git-send-email-jolsa@redhat.com
[ committer note: Use "symbol.h" instead of <symbol.h> to make it build with O= ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving strxfrchar function into string object.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-5-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving hex2u64 function into util object.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-4-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving build_id__sprintf function into build-id object.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-2-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored

__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.

The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05d in builtin-sched.c ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>