Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 大约 4 年

通知 14
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 08 5月, 2015 1 次提交
  3. 21 4月, 2015 1 次提交
    • P
      KVM: PPC: Book3S HV: Create debugfs file for each guest's HPT · e23a808b
      由 Paul Mackerras 提交于 
      This creates a debugfs directory for each HV guest (assuming debugfs
is enabled in the kernel config), and within that directory, a file
by which the contents of the guest's HPT (hashed page table) can be
read.  The directory is named vmnnnn, where nnnn is the PID of the
process that created the guest.  The file is named "htab".  This is
intended to help in debugging problems in the host's management
of guest memory.

The contents of the file consist of a series of lines like this:

  3f48 4000d032bf003505 0000000bd7ff1196 00000003b5c71196

The first field is the index of the entry in the HPT, the second and
third are the HPT entry, so the third entry contains the real page
number that is mapped by the entry if the entry's valid bit is set.
The fourth field is the guest's view of the second doubleword of the
entry, so it contains the guest physical address.  (The format of the
second through fourth fields are described in the Power ISA and also
in arch/powerpc/include/asm/mmu-hash64.h.)
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
      e23a808b
  5. 10 4月, 2015 1 次提交
  7. 08 4月, 2015 1 次提交
  9. 01 4月, 2015 1 次提交
  11. 27 3月, 2015 2 次提交
  13. 24 3月, 2015 1 次提交
    • I
      kvm: avoid page allocation failure in kvm_set_memory_region() · 74496134
      由 Igor Mammedov 提交于 
      KVM guest can fail to startup with following trace on host:

qemu-system-x86: page allocation failure: order:4, mode:0x40d0
Call Trace:
  dump_stack+0x47/0x67
  warn_alloc_failed+0xee/0x150
  __alloc_pages_direct_compact+0x14a/0x150
  __alloc_pages_nodemask+0x776/0xb80
  alloc_kmem_pages+0x3a/0x110
  kmalloc_order+0x13/0x50
  kmemdup+0x1b/0x40
  __kvm_set_memory_region+0x24a/0x9f0 [kvm]
  kvm_set_ioapic+0x130/0x130 [kvm]
  kvm_set_memory_region+0x21/0x40 [kvm]
  kvm_vm_ioctl+0x43f/0x750 [kvm]

Failure happens when attempting to allocate pages for
'struct kvm_memslots', however it doesn't have to be
present in physically contiguous (kmalloc-ed) address
space, change allocation to kvm_kvzalloc() so that
it will be vmalloc-ed when its size is more then a page.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
      74496134
  15. 19 3月, 2015 1 次提交
  17. 11 3月, 2015 1 次提交
  19. 10 3月, 2015 11 次提交
  21. 12 2月, 2015 1 次提交
  23. 09 2月, 2015 1 次提交
  25. 06 2月, 2015 1 次提交
    • P
      kvm: add halt_poll_ns module parameter · f7819512
      由 Paolo Bonzini 提交于 
      This patch introduces a new module parameter for the KVM module; when it
is present, KVM attempts a bit of polling on every HLT before scheduling
itself out via kvm_vcpu_block.

This parameter helps a lot for latency-bound workloads---in particular
I tested it with O_DSYNC writes with a battery-backed disk in the host.
In this case, writes are fast (because the data doesn't have to go all
the way to the platters) but they cannot be merged by either the host or
the guest.  KVM's performance here is usually around 30% of bare metal,
or 50% if you use cache=directsync or cache=writethrough (these
parameters avoid that the guest sends pointless flush requests, and
at the same time they are not slow because of the battery-backed cache).
The bad performance happens because on every halt the host CPU decides
to halt itself too.  When the interrupt comes, the vCPU thread is then
migrated to a new physical CPU, and in general the latency is horrible
because the vCPU thread has to be scheduled back in.

With this patch performance reaches 60-65% of bare metal and, more
important, 99% of what you get if you use idle=poll in the guest.  This
means that the tunable gets rid of this particular bottleneck, and more
work can be done to improve performance in the kernel or QEMU.

Of course there is some price to pay; every time an otherwise idle vCPUs
is interrupted by an interrupt, it will poll unnecessarily and thus
impose a little load on the host.  The above results were obtained with
a mostly random value of the parameter (500000), and the load was around
1.5-2.5% CPU usage on one of the host's core for each idle guest vCPU.

The patch also adds a new stat, /sys/kernel/debug/kvm/halt_successful_poll,
that can be used to tune the parameter.  It counts how many HLT
instructions received an interrupt during the polling period; each
successful poll avoids that Linux schedules the VCPU thread out and back
in, and may also avoid a likely trip to C1 and back for the physical CPU.

While the VM is idle, a Linux 4 VCPU VM halts around 10 times per second.
Of these halts, almost all are failed polls.  During the benchmark,
instead, basically all halts end within the polling period, except a more
or less constant stream of 50 per second coming from vCPUs that are not
running the benchmark.  The wasted time is thus very low.  Things may
be slightly different for Windows VMs, which have a ~10 ms timer tick.

The effect is also visible on Marcelo's recently-introduced latency
test for the TSC deadline timer.  Though of course a non-RT kernel has
awful latency bounds, the latency of the timer is around 8000-10000 clock
cycles compared to 20000-120000 without setting halt_poll_ns.  For the TSC
deadline timer, thus, the effect is both a smaller average latency and
a smaller variance.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      f7819512
  27. 29 1月, 2015 1 次提交
  29. 28 1月, 2015 1 次提交
  31. 16 1月, 2015 2 次提交
  33. 09 1月, 2015 1 次提交
  35. 28 12月, 2014 2 次提交
  37. 04 12月, 2014 6 次提交
  39. 26 11月, 2014 1 次提交
    • A
      kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn() · d3fccc7e
      由 Ard Biesheuvel 提交于 
      This reverts commit 85c8555f ("KVM: check for !is_zero_pfn() in
kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn.

The problem being addressed by the patch above was that some ARM code
based the memory mapping attributes of a pfn on the return value of
kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should
be mapped as device memory.

However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin,
and the existing non-ARM users were already using it in a way which
suggests that its name should probably have been 'kvm_is_reserved_pfn'
from the beginning, e.g., whether or not to call get_page/put_page on
it etc. This means that returning false for the zero page is a mistake
and the patch above should be reverted.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      d3fccc7e
  41. 25 11月, 2014 1 次提交
    • A
      kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn() · bf4bea8e
      由 Ard Biesheuvel 提交于 
      This reverts commit 85c8555f ("KVM: check for !is_zero_pfn() in
kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn.

The problem being addressed by the patch above was that some ARM code
based the memory mapping attributes of a pfn on the return value of
kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should
be mapped as device memory.

However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin,
and the existing non-ARM users were already using it in a way which
suggests that its name should probably have been 'kvm_is_reserved_pfn'
from the beginning, e.g., whether or not to call get_page/put_page on
it etc. This means that returning false for the zero page is a mistake
and the patch above should be reverted.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
      bf4bea8e
  43. 24 11月, 2014 1 次提交