- 20 11月, 2010 2 次提交
-
-
由 Eric Dumazet 提交于
Remove pc variable to avoid arithmetic to compute fentry at each filter instruction. Jumps directly manipulate fentry pointer. As the last instruction of filter[] is guaranteed to be a RETURN, and all jumps are before the last instruction, we dont need to check filter bounds (number of instructions in filter array) at each iteration, so we remove it from sk_run_filter() params. On x86_32 remove f_k var introduced in commit 57fe93b3 (filter: make sure filters dont read uninitialized memory) Note : We could use a CONFIG_ARCH_HAS_{FEW|MANY}_REGISTERS in order to avoid too many ifdefs in this code. This helps compiler to use cpu registers to hold fentry and A accumulator. On x86_32, this saves 401 bytes, and more important, sk_run_filter() runs much faster because less register pressure (One less conditional branch per BPF instruction) # size net/core/filter.o net/core/filter_pre.o text data bss dec hex filename 2948 0 0 2948 b84 net/core/filter.o 3349 0 0 3349 d15 net/core/filter_pre.o on x86_64 : # size net/core/filter.o net/core/filter_pre.o text data bss dec hex filename 5173 0 0 5173 1435 net/core/filter.o 5224 0 0 5224 1468 net/core/filter_pre.o Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sarveshwar Bandi 提交于
Since interrupts are enabled only when open is called on the interface, Attempting a firmware update operation when interface is down could lead to partial success or failure of operation. This fix fails the request if netif_running is false. Signed-off-by: NSarveshwar Bandi <Sarveshwar.Bandi@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 11月, 2010 8 次提交
-
-
由 Tomoya 提交于
Replace bit assignment value to BIT(X). For easy to readable/identifiable, replace all bit assigned macros to BIT(X) Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tomoya 提交于
For easy to readable/identifiable, add prefix "PCH_" to all of #define macros. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Namhyung Kim 提交于
VORTEX_PCI() could return NULL so it needs to be casted before accessing any member of struct pci_dev. This fixes following build failure. Likewise VORTEX_EISA() was changed also. CC [M] drivers/net/3c59x.o drivers/net/3c59x.c: In function 'acpi_set_WOL': drivers/net/3c59x.c:3211:39: warning: dereferencing 'void *' pointer drivers/net/3c59x.c:3211:39: error: request for member 'current_state' in something not a structure or union make[3]: *** [drivers/net/3c59x.o] Error 1 make[2]: *** [drivers/net/3c59x.o] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ken Kawasaki 提交于
ipg.c: The id [SUNDANCE, 0x1021] (=[0x13f0, 0x1021]) is defined at dl2k.h and ipg.c. But this device works better with dl2k driver. This problem is similar with the commit [25cca535 ipg: Remove device claimed by dl2k from pci id table] at 11 Feb 2010. Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasiliy Kulikov 提交于
alloc_netdev() is not checked here for NULL return value. dev is check instead. It might lead to NULL dereference of ndev. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajkumar Manoharan 提交于
Setting tid information in the TX header is required only for QoS frames. Not handling this case causes severe data loss with some APs. Cc: stable@kernel.org Signed-off-by: NRajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Eric Dumazet 提交于
Instead of iterating in_dev->mc_list from bonding driver, its better to call a helper function provided by igmp.c Details of implementation (locking) are private to igmp code. ip_mc_rejoin_group(struct ip_mc_list *im) becomes ip_mc_rejoin_groups(struct in_device *in_dev); Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
RCU conversion in IGMP code done in net-next-2.6 raised a race in __bond_resend_igmp_join_requests(). It iterates in_dev->mc_list without appropriate protection (RTNL, or read_lock on in_dev->mc_list_lock). Another cpu might delete an entry while we use it and trigger a fault. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 11月, 2010 20 次提交
-
-
由 Nicolas Kaiser 提交于
irq_of_parse_and_map() has an unsigned return type. Testing for a negative error value doesn't work here. Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe De Muyter 提交于
indentation for TSI108_ETH entry was too big. Signed-off-by: NPhilippe De Muyter <phdm@macqel.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Using %pR standardizes the struct resource output. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasiliy Kulikov 提交于
bnx2x_init_one() should return negative value on error. By mistake it returns ENODEV instead of -ENODEV. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shan Wei 提交于
I am not family with RealTek RTL-8139C+ series 10/100 PCI Ethernet driver. I try to guess the meaning of RxProtoIP and IPFail. RxProtoIP stands for received IPv4 packet that upper protocol is not tcp and udp. !(status & IPFail) is true means that driver correctly to check checksum in IPv4 header. If these are right, driver will set ip_summed with CHECKSUM_UNNECESSARY for other upper protocol, e.g. sctp, igmp protocol. This will cause protocol stack ignores checksum check for packets with invalid checksum. This patch is only compile-test. Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shan Wei 提交于
If r8196 received packets with invalid sctp/igmp(not tcp, udp) checksum, r8196 set skb->ip_summed wit CHECKSUM_UNNECESSARY. This cause that upper protocol don't check checksum field. I am not family with r8196 driver. I try to guess the meaning of RxProtoIP and IPFail. RxProtoIP stands for received IPv4 packet that upper protocol is not tcp and udp. !(opts1 & IPFail) is true means that driver correctly to check checksum in IPv4 header. If it's right, I think we should not set ip_summed wit CHECKSUM_UNNECESSARY for my sctp packets with invalid checksum. If it's not right, please tell me. Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anirban Chakraborty 提交于
Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Log LRO off message while disabling rx checksum only when LRO is already enabled. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Add description for CN1000Q adapter Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
In case of kdump environment the function may be in unknown state. Reset the function using PCI FLR before initializing it. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
Allow minimum bandwidth to be set zero Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2010 10 次提交
-
-
由 Dongdong Deng 提交于
With enabling CONFIG_PCI_MSI, e1000e could work in MSI/MSI-X IRQ mode, and netpoll controller didn't deal with those IRQ modes on e1000e. This patch add the handling MSI/MSI-X IRQ modes to netpoll controller, so that netconsole could work with those IRQ modes. Signed-off-by: NDongdong Deng <dongdong.deng@windriver.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
The driver can fail initializing the hardware when manageability firmware is performing concurrent MDIO operations because the hardware semaphore scheme to prevent concurrent operations between software and firmware is incorrect for 82574/82583. Instead of using the SWSM register, the driver should be using the EXTCNF_CTRL register. A software mutex is also added to prevent simultaneous software threads from performing similar concurrent accesses. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
SerDes Link detection on certain 82571 mezzanine cards can fail when the link is forced, the link partner does not recognize forced link and the link partner sends null code words. Detect the null code words and return to auto-negotiation state which causes the link partner to begin responding with valid code words. Within a reasonable interval the link will finally settle as forced by both partners. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
declaration. Reported-by: NAndi Kleen <andi@firstfloor.org> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Julian Stecklina 提交于
Removed unused variable in igbvf. Signed-off-by: NJulian Stecklina <jsteckli@os.inf.tu-dresden.de> Acked-by: NGreg Rose <greg.v.rose@intel.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Update version string and copyright notice Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
The driver is calling netif_carrier_off and netif_tx_stop_all_queues before the netdevice is registered which causes an Oops. Move call to netif_carrier_off after the netdevice is registered and remove call to netif_tx_stop_all_queues because there aren't any TX queues yet. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Eric Dumazet 提交于
I noticed ring variable was initialized before allocations, and that memory node management was a bit ugly. We also leak memory in case of ring allocations error. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
This patch adds support for the x540 MAC which is the next MAC in the 82598/82599 line. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
Adds the new x540.c file and Aquantia 1202 PHY for X540 support. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-