The debug batman option needs to depend on the correct
config option.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Here I've kept the selection of IIO_SW_RING separate from
IIO_TRIGGER as it will go away fairly shortly when the ring buffer
type becomes configurable on a per device basis, whereas the
IIO_TRIGGER select will remain. Whether to retain the option to
remove the support for ring buffers entirely is one for after that
support is in place.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Minimal changes to driver. Just adds the device to the id
table and adjusts the Kconfig elements appropriately.

Adding further similar chips from TAOS is complicated by their
different conversion functions (and hence left for now).
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NAmit Kucheria <amit.kucheria@verdurent.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch simply removes the tsl2561 driver.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NAmit Kucheria <amit.kucheria@verdurent.com>

Adjusts the signal levels reported by the wlags49_h2 and wlags49_h25 staging
drivers. With the constants supplied by Agere the signal levels are always
poor, even in close proximity to the AP. The signals are now measured with
a real device. 100% for close proximity to the AP, 0% for the noice floor.
Now the levels shown by the NetworkManager gauge make sense.

Some magic numbers in the related code are replaced by the correct constants
from the wireless extension interface (wireless.h). Also the flag IW_QUAL_DBM
is now set, as specified in the wireless.h header file.
Signed-off-by: NHenk de Groot <pe1dnn@amsat.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cc: Henk de Groot <pe1dnn@amsat.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Don't test for the kernel version, we know what version we are in,
the latest.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a drive for the Samsung N128 laptop to control the wireless LED
and backlight.

Many thanks to Joey Lee for his help in testing and finding all of my
bugs in the development of this driver, it has been invaluable.

Cc: Joey Lee <jlee@novell.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
a routing protocol for multi-hop ad-hoc mesh networks. The
networks may be wired or wireless. See
http://www.open-mesh.org/ for more information and user space
tools.

This is the first submission for inclusion in staging.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

rtl8192u uses usb_* interfaces so it should depend on USB.

ERROR: "usb_kill_urb" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "usb_deregister" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "usb_control_msg" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "usb_submit_urb" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "usb_register_driver" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "usb_free_urb" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "usb_alloc_urb" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove #ifse against older kernel versions;
Remove codes marked with #if 0;
Remove #if 1
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add it to staging Kbuild and fixes some API differences that prevents
compilation.

It seems that the ieee80211 stack is very close to rtl8192su one.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add Realtek linux driver for rtl8192u as provided by Realtek

rtl8192u_linux_2.6.0006.1031.2008.tar.gz, send to me C/C staging ML.

This version won't compile against upstream, doesn't follow
Linux CodingStyle and has their own ieee80211 stack.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds generic_gpio and pmem support, both are needed for other
dream drivers.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds TODO list. It is probably incomplete, as many parts were not
reviewed by the upstream maintainers, yet.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

These drivers are no longer being developed and the original authors
seem to have abandonded them and hence, do not want them in the mainline
kernel tree.

So sad :(

Cc: Brian Swetland <swetland@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

These have a wrap bit but again need little work to clean out. There are a
couple of uglies left that want addressing in later clean up. Notably we should
probably keep the local psr copy and wrap as two values.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Lots of RX typedefs are just low bits of a u32, so clean them all up in one
go and just work them directly.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Another one bits the dust ...
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Guess what - we don't use this one either
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Yes folks it another unused typedef.. This completes the clean up of the
TX DMA typedefs
Signed-off-by: NAlan Cox <alan@linux.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It's really a local in the interrupt handler
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Might as well use something short and obvious
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

One by one...
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now that active development has begun on a mainline version of
a driver for the RTL8187SE that should be called rtl8187se, there
is a conflict with the driver in staging with the same name.

To solve the conflict, rename the driver in staging to r8187se.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The vendor-written driver for the RTL8187SE has a private variable
for the card type, even though it only occurs in PCI format.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When this code is used for the rtl8187se, the value of card_8185
in struct r8180_priv is always 7 or 8. As a result, the program
flow can be simplified.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Tested-by: NBernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMariusz Ziulek <mz.mzet@gmail.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes superfluous exclamation marks from strings and comments, and
also three spelling typos.
Signed-off-by: NSebastian Dalfuß <sd@sedf.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add driver support for the tsl2563 TAOS ambient light sensor. After looking at
discussions on LKML, the driver was modified from a 'hwmon' driver to an 'iio'
driver. The sysfs interfaces have been tested on an RX51 (N900) to see if it
responds to changing light conditions.

The only real reason for submitting this to staging is that it is dependent on
the IIO subsystem.
Signed-off-by: NAmit Kucheria <amit.kucheria@verdurent.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: linux-omap@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Spell-check wouln't catch these :)
Signed-off-by: NAmit Kucheria <amit.kucheria@verdurent.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>