1. 01 4月, 2006 6 次提交
  2. 29 3月, 2006 1 次提交
  3. 28 3月, 2006 1 次提交
    • A
      [PATCH] Notifier chain update: API changes · e041c683
      Alan Stern 提交于
      The kernel's implementation of notifier chains is unsafe.  There is no
      protection against entries being added to or removed from a chain while the
      chain is in use.  The issues were discussed in this thread:
      
          http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2
      
      We noticed that notifier chains in the kernel fall into two basic usage
      classes:
      
      	"Blocking" chains are always called from a process context
      	and the callout routines are allowed to sleep;
      
      	"Atomic" chains can be called from an atomic context and
      	the callout routines are not allowed to sleep.
      
      We decided to codify this distinction and make it part of the API.  Therefore
      this set of patches introduces three new, parallel APIs: one for blocking
      notifiers, one for atomic notifiers, and one for "raw" notifiers (which is
      really just the old API under a new name).  New kinds of data structures are
      used for the heads of the chains, and new routines are defined for
      registration, unregistration, and calling a chain.  The three APIs are
      explained in include/linux/notifier.h and their implementation is in
      kernel/sys.c.
      
      With atomic and blocking chains, the implementation guarantees that the chain
      links will not be corrupted and that chain callers will not get messed up by
      entries being added or removed.  For raw chains the implementation provides no
      guarantees at all; users of this API must provide their own protections.  (The
      idea was that situations may come up where the assumptions of the atomic and
      blocking APIs are not appropriate, so it should be possible for users to
      handle these things in their own way.)
      
      There are some limitations, which should not be too hard to live with.  For
      atomic/blocking chains, registration and unregistration must always be done in
      a process context since the chain is protected by a mutex/rwsem.  Also, a
      callout routine for a non-raw chain must not try to register or unregister
      entries on its own chain.  (This did happen in a couple of places and the code
      had to be changed to avoid it.)
      
      Since atomic chains may be called from within an NMI handler, they cannot use
      spinlocks for synchronization.  Instead we use RCU.  The overhead falls almost
      entirely in the unregister routine, which is okay since unregistration is much
      less frequent that calling a chain.
      
      Here is the list of chains that we adjusted and their classifications.  None
      of them use the raw API, so for the moment it is only a placeholder.
      
        ATOMIC CHAINS
        -------------
      arch/i386/kernel/traps.c:		i386die_chain
      arch/ia64/kernel/traps.c:		ia64die_chain
      arch/powerpc/kernel/traps.c:		powerpc_die_chain
      arch/sparc64/kernel/traps.c:		sparc64die_chain
      arch/x86_64/kernel/traps.c:		die_chain
      drivers/char/ipmi/ipmi_si_intf.c:	xaction_notifier_list
      kernel/panic.c:				panic_notifier_list
      kernel/profile.c:			task_free_notifier
      net/bluetooth/hci_core.c:		hci_notifier
      net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_chain
      net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_expect_chain
      net/ipv6/addrconf.c:			inet6addr_chain
      net/netfilter/nf_conntrack_core.c:	nf_conntrack_chain
      net/netfilter/nf_conntrack_core.c:	nf_conntrack_expect_chain
      net/netlink/af_netlink.c:		netlink_chain
      
        BLOCKING CHAINS
        ---------------
      arch/powerpc/platforms/pseries/reconfig.c:	pSeries_reconfig_chain
      arch/s390/kernel/process.c:		idle_chain
      arch/x86_64/kernel/process.c		idle_notifier
      drivers/base/memory.c:			memory_chain
      drivers/cpufreq/cpufreq.c		cpufreq_policy_notifier_list
      drivers/cpufreq/cpufreq.c		cpufreq_transition_notifier_list
      drivers/macintosh/adb.c:		adb_client_list
      drivers/macintosh/via-pmu.c		sleep_notifier_list
      drivers/macintosh/via-pmu68k.c		sleep_notifier_list
      drivers/macintosh/windfarm_core.c	wf_client_list
      drivers/usb/core/notify.c		usb_notifier_list
      drivers/video/fbmem.c			fb_notifier_list
      kernel/cpu.c				cpu_chain
      kernel/module.c				module_notify_list
      kernel/profile.c			munmap_notifier
      kernel/profile.c			task_exit_notifier
      kernel/sys.c				reboot_notifier_list
      net/core/dev.c				netdev_chain
      net/decnet/dn_dev.c:			dnaddr_chain
      net/ipv4/devinet.c:			inetaddr_chain
      
      It's possible that some of these classifications are wrong.  If they are,
      please let us know or submit a patch to fix them.  Note that any chain that
      gets called very frequently should be atomic, because the rwsem read-locking
      used for blocking chains is very likely to incur cache misses on SMP systems.
      (However, if the chain's callout routines may sleep then the chain cannot be
      atomic.)
      
      The patch set was written by Alan Stern and Chandra Seetharaman, incorporating
      material written by Keith Owens and suggestions from Paul McKenney and Andrew
      Morton.
      
      [jes@sgi.com: restructure the notifier chain initialization macros]
      Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
      Signed-off-by: NJes Sorensen <jes@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      e041c683
  4. 27 3月, 2006 8 次提交
  5. 26 3月, 2006 2 次提交
  6. 24 3月, 2006 1 次提交
  7. 23 3月, 2006 2 次提交
    • A
      [PATCH] more for_each_cpu() conversions · 394e3902
      Andrew Morton 提交于
      When we stop allocating percpu memory for not-possible CPUs we must not touch
      the percpu data for not-possible CPUs at all.  The correct way of doing this
      is to test cpu_possible() or to use for_each_cpu().
      
      This patch is a kernel-wide sweep of all instances of NR_CPUS.  I found very
      few instances of this bug, if any.  But the patch converts lots of open-coded
      test to use the preferred helper macros.
      
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: David Howells <dhowells@redhat.com>
      Acked-by: NKyle McMartin <kyle@parisc-linux.org>
      Cc: Anton Blanchard <anton@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: William Lee Irwin III <wli@holomorphy.com>
      Cc: Andi Kleen <ak@muc.de>
      Cc: Christian Zankel <chris@zankel.net>
      Cc: Philippe Elie <phil.el@wanadoo.fr>
      Cc: Nathan Scott <nathans@sgi.com>
      Cc: Jens Axboe <axboe@suse.de>
      Cc: Eric Dumazet <dada1@cosmosbay.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      394e3902
    • N
      [PATCH] sparc64: fix set_page_count merge clash · fcab1e51
      Nick Piggin 提交于
      Merge clash will have broken sparc64. Synch up its online_page
      implementation with powerpc, which was identical until the
      set_page_count removal.
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      fcab1e51
  8. 22 3月, 2006 4 次提交
    • D
      [PATCH] hugepage: is_aligned_hugepage_range() cleanup · 42b88bef
      David Gibson 提交于
      Quite a long time back, prepare_hugepage_range() replaced
      is_aligned_hugepage_range() as the callback from mm/mmap.c to arch code to
      verify if an address range is suitable for a hugepage mapping.
      is_aligned_hugepage_range() stuck around, but only to implement
      prepare_hugepage_range() on archs which didn't implement their own.
      
      Most archs (everything except ia64 and powerpc) used the same
      implementation of is_aligned_hugepage_range().  On powerpc, which
      implements its own prepare_hugepage_range(), the custom version was never
      used.
      
      In addition, "is_aligned_hugepage_range()" was a bad name, because it
      suggests it returns true iff the given range is a good hugepage range,
      whereas in fact it returns 0-or-error (so the sense is reversed).
      
      This patch cleans up by abolishing is_aligned_hugepage_range().  Instead
      prepare_hugepage_range() is defined directly.  Most archs use the default
      version, which simply checks the given region is aligned to the size of a
      hugepage.  ia64 and powerpc define custom versions.  The ia64 one simply
      checks that the range is in the correct address space region in addition to
      being suitably aligned.  The powerpc version (just as previously) checks
      for suitable addresses, and if necessary performs low-level MMU frobbing to
      set up new areas for use by hugepages.
      
      No libhugetlbfs testsuite regressions on ppc64 (POWER5 LPAR).
      Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
      Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: William Lee Irwin III <wli@holomorphy.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      42b88bef
    • N
      [PATCH] remove set_page_count() outside mm/ · 7835e98b
      Nick Piggin 提交于
      set_page_count usage outside mm/ is limited to setting the refcount to 1.
      Remove set_page_count from outside mm/, and replace those users with
      init_page_count() and set_page_refcounted().
      
      This allows more debug checking, and tighter control on how code is allowed
      to play around with page->_count.
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      7835e98b
    • D
      dcc1e8dd
    • D
      [SPARC]: Respect vm_page_prot in io_remap_page_range(). · 14778d90
      David S. Miller 提交于
      Make sure the callers do a pgprot_noncached() on
      vma->vm_page_prot.
      
      Pointed out by Hugh Dickens.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      14778d90
  9. 20 3月, 2006 15 次提交
    • D
      [SPARC64]: Update defconfig. · ac0eb3eb
      David S. Miller 提交于
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ac0eb3eb
    • D
      [SPARC64]: Fix 2 bugs in huge page support. · f6b83f07
      David S. Miller 提交于
      1) huge_pte_offset() did not check the page table hierarchy
         elements as being empty correctly, resulting in an OOPS
      
      2) Need platform specific hugetlb_get_unmapped_area() to handle
         the top-down vs. bottom-up address space allocation strategies.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f6b83f07
    • A
      [SPARC64]: CONFIG_BLK_DEV_RAM fix · 467418f3
      Andrew Morton 提交于
      init/do_mounts_rd.c depends upon CONFIG_BLK_DEV_RAM, not CONFIG_BLK_DEV_INITRD.
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      467418f3
    • D
      [SPARC64]: Optimized TSB table initialization. · bb8646d8
      David S. Miller 提交于
      We only need to write an invalid tag every 16 bytes,
      so taking advantage of this can save many instructions
      compared to the simple memset() call we make now.
      
      A prefetching implementation is implemented for sun4u
      and a block-init store version if implemented for Niagara.
      
      The next trick is to be able to perform an init and
      a copy_tsb() in parallel when growing a TSB table.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bb8646d8
    • D
      [SPARC64]: Allow CONFIG_MEMORY_HOTPLUG to build. · 88d70794
      David S. Miller 提交于
      online_page() is straightforward, and then add a dummy
      remove_memory() that returns -EINVAL just like i386.
      
      There is no point in implementing remove_memory() since
      __remove_pages() has no implementation either.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      88d70794
    • D
      [SPARC64]: Use SLAB caches for TSB tables. · 9b4006dc
      David S. Miller 提交于
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9b4006dc
    • D
      [SPARC64]: Don't kill the page allocator when growing a TSB. · b52439c2
      David S. Miller 提交于
      Try only lightly on > 1 order allocations.
      
      If a grow fails, we are under memory pressure, so do not try
      to grow the TSB for this address space any more.
      
      If a > 0 order TSB allocation fails on a new fork, retry using
      a 0 order allocation.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b52439c2
    • D
    • D
      [SPARC64]: Increase top of 32-bit process stack. · d61e16df
      David S. Miller 提交于
      Put it one page below the top of the 32-bit address space.
      This gives us ~16MB more address space to work with.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d61e16df
    • D
      [SPARC64]: Top-down address space allocation for 32-bit tasks. · a91690dd
      David S. Miller 提交于
      Currently allocations are very constrained for 32-bit processes.
      It grows down-up from 0x70000000 to 0xf0000000 which gives about
      2GB of stack + dynamic mmap() space.
      
      So support the top-down method, and we need to override the
      generic helper function in order to deal with D-cache coloring.
      
      With these changes I was able to squeeze out a mmap() just over
      3.6GB in size in a 32-bit process.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a91690dd
    • D
      [SPARC64]: Fix and re-enable dynamic TSB sizing. · 7a1ac526
      David S. Miller 提交于
      This is good for up to %50 performance improvement of some test cases.
      The problem has been the race conditions, and hopefully I've plugged
      them all up here.
      
      1) There was a serious race in switch_mm() wrt. lazy TLB
         switching to and from kernel threads.
      
         We could erroneously skip a tsb_context_switch() and thus
         use a stale TSB across a TSB grow event.
      
         There is a big comment now in that function describing
         exactly how it can happen.
      
      2) All code paths that do something with the TSB need to be
         guarded with the mm->context.lock spinlock.  This makes
         page table flushing paths properly synchronize with both
         TSB growing and TLB context changes.
      
      3) TSB growing events are moved to the end of successful fault
         processing.  Previously it was in update_mmu_cache() but
         that is deadlock prone.  At the end of do_sparc64_fault()
         we hold no spinlocks that could deadlock the TSB grow
         sequence.  We also have dropped the address space semaphore.
      
      While we're here, add prefetching to the copy_tsb() routine
      and put it in assembler into the tsb.S file.  This piece of
      code is quite time critical.
      
      There are some small negative side effects to this code which
      can be improved upon.  In particular we grab the mm->context.lock
      even for the tsb insert done by update_mmu_cache() now and that's
      a bit excessive.  We can get rid of that locking, and the same
      lock taking in flush_tsb_user(), by disabling PSTATE_IE around
      the whole operation including the capturing of the tsb pointer
      and tsb_nentries value.  That would work because anyone growing
      the TSB won't free up the old TSB until all cpus respond to the
      TSB change cross call.
      
      I'm not quite so confident in that optimization to put it in
      right now, but eventually we might be able to and the description
      is here for reference.
      
      This code seems very solid now.  It passes several parallel GCC
      bootstrap builds, and our favorite "nut cruncher" stress test which is
      a full "make -j8192" build of a "make allmodconfig" kernel.  That puts
      about 256 processes on each cpu's run queue, makes lots of process cpu
      migrations occur, causes lots of page table and TLB flushing activity,
      incurs many context version number changes, and it swaps the machine
      real far out to disk even though there is 16GB of ram on this test
      system. :-)
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7a1ac526
    • D
      [SPARC64]: First cut at VIS simulator for Niagara. · 0c51ed93
      David S. Miller 提交于
      Niagara does not implement some of the VIS instructions in
      hardware, so we have to emulate them.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0c51ed93
    • D
      [SPARC64]: Fix system type in /proc/cpuinfo and remove bogus OBP check. · 90a6646b
      David S. Miller 提交于
      Report 'sun4v' when appropriate in /proc/cpuinfo
      
      Remove all the verifications of the OBP version string.  Just
      make sure it's there, and report it raw in the bootup logs and
      via /proc/cpuinfo.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      90a6646b
    • D
      [SPARC64]: Add SMT scheduling support for Niagara. · 8935dced
      David S. Miller 提交于
      The mapping is a simple "(cpuid >> 2) == core" for now.
      Later we'll add more sophisticated code that will walk
      the sun4v machine description and figure this out from
      there.
      
      We should also add core mappings for jaguar and panther
      processors.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8935dced
    • D
      [SPARC64]: Fix 32-bit truncation which broke sparsemem. · 17b0e199
      David S. Miller 提交于
      The page->flags manipulations done by the D-cache dirty
      state tracking was broken because the constants were not
      marked with "UL" to make them 64-bit, which means we were
      clobbering the upper 32-bits of page->flags all the time.
      
      This doesn't jive well with sparsemem which stores the
      section and indexing information in the top 32-bits of
      page->flags.
      
      This is yet another sparc64 bug which has been with us
      forever.
      
      While we're here, tidy up some things in bootmem_init()
      and paginig_init():
      
      1) Pass min_low_pfn to init_bootmem_node(), it's identical
         to (phys_base >> PAGE_SHIFT) but we should use consistent
         with the variable names we print in CONFIG_BOOTMEM_DEBUG
      
      2) max_mapnr, although no longer used, was being set
         inaccurately, we shouldn't subtract pfn_base any more.
      
      3) All the games with phys_base in the zones_*[] arrays
         we pass to free_area_init_node() are no longer necessary.
      
      Thanks to Josh Grebe and Fabbione for the bug reports
      and testing.  Fix also verified locally on an SB2500
      which had a memory layout that triggered the same problem.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      17b0e199