dquots are never flushed asynchronously. Remove the flag and the
async write support from the flush function. Make the default flush
a delwri flush to make the inode flush code, which leaves the
XFS_QMOPT_SYNC the only flag remaining.  Convert that to use
SYNC_WAIT instead, just like the inode flush code.

V2:
- just pass flush flags straight through
Signed-off-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

xfs_qm_dqflock_pushbuf_wait() does a very similar trick to item
pushing used to do to flush out delayed write dquot buffers. Change
it to use the new promotion method rather than an async flush.

Also, xfs_qm_dqflock_pushbuf_wait() can return without the flush lock
held, yet the callers make the assumption that after this call the
flush lock is held. Always return with the flush lock held.
Signed-off-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

All buffers logged into the AIL are marked as delayed write.
When the AIL needs to push the buffer out, it issues an async write of the
buffer. This means that IO patterns are dependent on the order of
buffers in the AIL.

Instead of flushing the buffer, promote the buffer in the delayed
write list so that the next time the xfsbufd is run the buffer will
be flushed by the xfsbufd. Return the state to the xfsaild that the
buffer was promoted so that the xfsaild knows that it needs to cause
the xfsbufd to run to flush the buffers that were promoted.

Using the xfsbufd for issuing the IO allows us to dispatch all
buffer IO from the one queue. This means that we can make much more
enlightened decisions on what order to flush buffers to disk as
we don't have multiple places issuing IO. Optimisations to xfsbufd
will be in a future patch.

Version 2
- kill XFS_ITEM_FLUSHING as it is now unused.
Signed-off-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

A "df" run on an NFS client of an exported XFS file system reports
the wrong information for "available" blocks.  When a block quota is
enforced, the amount reported as free is limited by the quota, but
the amount reported available is not (and should be).
Reported-by: NGuk-Bong, Kwon <gbkwon@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

We use the KM_LARGE flag to make kmem_alloc and friends use vmalloc
if necessary.  As we only need this for a few boot/mount time
allocations just switch to explicit vmalloc calls there.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Remove the XFS_LOG_FORCE argument which was always set, and the
XFS_LOG_URGE define, which was never used.

Split xfs_log_force into a two helpers - xfs_log_force which forces
the whole log, and xfs_log_force_lsn which forces up to the
specified LSN.  The underlying implementations already were entirely
separate, as were the users.

Also re-indent the new _xfs_log_force/_xfs_log_force which
previously had a weird coding style.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

This macro only obsfucates the log item type assignments, so kill it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Currently we define aliases for the buffer flags in various
namespaces, which only adds confusion.  Remove all but the XBF_
flags to clean this up a bit.

Note that we still abuse XFS_B_ASYNC/XBF_ASYNC for some non-buffer
uses, but I'll clean that up later.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Wire up quota_send_warning to send quota warnings over netlink.
This is used by various desktops to show user quota warnings.

Tested by running the quota_nld daemon while running the xfstest
quota tests and observing the warnings.  I'll see how I can get a
more formal testcase for it written.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Move the error code selection after the goto label and fold the
xfs_quota_error helper into it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

The option is unused and one of the few remaining users of
xfs_bawrite, so let's get rid of it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Make the inode tree reclaim walk exclusive to avoid races with
concurrent sync walkers and lookups. This is a version of a patch
posted by Christoph Hellwig that avoids all the code duplication.
Signed-off-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Convert the old xfs tracing support that could only be used with the
out of tree kdb and xfsidbg patches to use the generic event tracer.

To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
all xfs trace channels by:

   echo 1 > /sys/kernel/debug/tracing/events/xfs/enable

or alternatively enable single events by just doing the same in one
event subdirectory, e.g.

   echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable

or set more complex filters, etc. In Documentation/trace/events.txt
all this is desctribed in more detail.  To reads the events do a

   cat /sys/kernel/debug/tracing/trace

Compared to the last posting this patch converts the tracing mostly to
the one tracepoint per callsite model that other users of the new
tracing facility also employ.  This allows a very fine-grained control
of the tracing, a cleaner output of the traces and also enables the
perf tool to use each tracepoint as a virtual performance counter,
     allowing us to e.g. count how often certain workloads git various
     spots in XFS.  Take a look at

    http://lwn.net/Articles/346470/

for some examples.

Also the btree tracing isn't included at all yet, as it will require
additional core tracing features not in mainline yet, I plan to
deliver it later.

And the really nice thing about this patch is that it actually removes
many lines of code while adding this nice functionality:

 fs/xfs/Makefile                |    8
 fs/xfs/linux-2.6/xfs_acl.c     |    1
 fs/xfs/linux-2.6/xfs_aops.c    |   52 -
 fs/xfs/linux-2.6/xfs_aops.h    |    2
 fs/xfs/linux-2.6/xfs_buf.c     |  117 +--
 fs/xfs/linux-2.6/xfs_buf.h     |   33
 fs/xfs/linux-2.6/xfs_fs_subr.c |    3
 fs/xfs/linux-2.6/xfs_ioctl.c   |    1
 fs/xfs/linux-2.6/xfs_ioctl32.c |    1
 fs/xfs/linux-2.6/xfs_iops.c    |    1
 fs/xfs/linux-2.6/xfs_linux.h   |    1
 fs/xfs/linux-2.6/xfs_lrw.c     |   87 --
 fs/xfs/linux-2.6/xfs_lrw.h     |   45 -
 fs/xfs/linux-2.6/xfs_super.c   |  104 ---
 fs/xfs/linux-2.6/xfs_super.h   |    7
 fs/xfs/linux-2.6/xfs_sync.c    |    1
 fs/xfs/linux-2.6/xfs_trace.c   |   75 ++
 fs/xfs/linux-2.6/xfs_trace.h   | 1369 +++++++++++++++++++++++++++++++++++++++++
 fs/xfs/linux-2.6/xfs_vnode.h   |    4
 fs/xfs/quota/xfs_dquot.c       |  110 ---
 fs/xfs/quota/xfs_dquot.h       |   21
 fs/xfs/quota/xfs_qm.c          |   40 -
 fs/xfs/quota/xfs_qm_syscalls.c |    4
 fs/xfs/support/ktrace.c        |  323 ---------
 fs/xfs/support/ktrace.h        |   85 --
 fs/xfs/xfs.h                   |   16
 fs/xfs/xfs_ag.h                |   14
 fs/xfs/xfs_alloc.c             |  230 +-----
 fs/xfs/xfs_alloc.h             |   27
 fs/xfs/xfs_alloc_btree.c       |    1
 fs/xfs/xfs_attr.c              |  107 ---
 fs/xfs/xfs_attr.h              |   10
 fs/xfs/xfs_attr_leaf.c         |   14
 fs/xfs/xfs_attr_sf.h           |   40 -
 fs/xfs/xfs_bmap.c              |  507 +++------------
 fs/xfs/xfs_bmap.h              |   49 -
 fs/xfs/xfs_bmap_btree.c        |    6
 fs/xfs/xfs_btree.c             |    5
 fs/xfs/xfs_btree_trace.h       |   17
 fs/xfs/xfs_buf_item.c          |   87 --
 fs/xfs/xfs_buf_item.h          |   20
 fs/xfs/xfs_da_btree.c          |    3
 fs/xfs/xfs_da_btree.h          |    7
 fs/xfs/xfs_dfrag.c             |    2
 fs/xfs/xfs_dir2.c              |    8
 fs/xfs/xfs_dir2_block.c        |   20
 fs/xfs/xfs_dir2_leaf.c         |   21
 fs/xfs/xfs_dir2_node.c         |   27
 fs/xfs/xfs_dir2_sf.c           |   26
 fs/xfs/xfs_dir2_trace.c        |  216 ------
 fs/xfs/xfs_dir2_trace.h        |   72 --
 fs/xfs/xfs_filestream.c        |    8
 fs/xfs/xfs_fsops.c             |    2
 fs/xfs/xfs_iget.c              |  111 ---
 fs/xfs/xfs_inode.c             |   67 --
 fs/xfs/xfs_inode.h             |   76 --
 fs/xfs/xfs_inode_item.c        |    5
 fs/xfs/xfs_iomap.c             |   85 --
 fs/xfs/xfs_iomap.h             |    8
 fs/xfs/xfs_log.c               |  181 +----
 fs/xfs/xfs_log_priv.h          |   20
 fs/xfs/xfs_log_recover.c       |    1
 fs/xfs/xfs_mount.c             |    2
 fs/xfs/xfs_quota.h             |    8
 fs/xfs/xfs_rename.c            |    1
 fs/xfs/xfs_rtalloc.c           |    1
 fs/xfs/xfs_rw.c                |    3
 fs/xfs/xfs_trans.h             |   47 +
 fs/xfs/xfs_trans_buf.c         |   62 -
 fs/xfs/xfs_vnodeops.c          |    8
 70 files changed, 2151 insertions(+), 2592 deletions(-)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

xfs_dqrele_inode calls xfs_iput to release the ilock and a reference
and then also calls IRELE which does a second decrement of the reference
count.  This leads to a premature freeing of inodes when quotas were turned
off while the filesystem was mounted.

Thanks to Utako Kusaka for reporting the bug and provinding a good testcase.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NUtako Kusaka <u-kusaka@wm.jp.nec.com>
Reviewed-by: NAlex Elder <aelder@sgi.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

create_proc_read_entry() is getting deprecated.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAlex Elder <aelder@sgi.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

This patch rips out the XFS ACL handling code and uses the generic
fs/posix_acl.c code instead.  The ondisk format is of course left
unchanged.

This also introduces the same ACL caching all other Linux filesystems do
by adding pointers to the acl and default acl in struct xfs_inode.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NEric Sandeen <sandeen@sandeen.net>

SYNC_BDFLUSH is a leftover from IRIX and rather misnamed for todays
code.  Make xfs_sync_fsdata and xfs_dq_sync use the SYNC_TRYLOCK flag
for not blocking on logs just as the inode sync code already does.

For xfs_sync_fsdata it's a trivial 1:1 replacement, but for xfs_qm_sync
I use the opportunity to decouple the non-blocking lock case from the
different flushing modes, similar to the inode sync code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NEric Sandeen <sandeen@sandeen.net>

Use xfs_inode_ag_iterator instead of opencoding the inode walk in the
quota code.  Mark xfs_inode_ag_iterator and xfs_sync_inode_valid non-static
to allow using them from the quota code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed-by: NEric Sandeen <sandeen@sandeen.net>

Kill the quota ops function vector and replace it with direct calls or
stubs in the CONFIG_XFS_QUOTA=n case.

Make sure we check XFS_IS_QUOTA_RUNNING in the right spots.  We can remove
the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set
otherwise.

This brings us back closer to the way this code worked in IRIX and earlier
Linux versions, but we keep a lot of the more useful factoring of common
code.

Eventually we should also kill xfs_qm_bhv.c, but that's left for a later
patch.

Reduces the size of the source code by about 250 lines and the size of
XFS module by about 1.5 kilobytes with quotas enabled:

   text	   data	    bss	    dec	    hex	filename
 615957	   2960	   3848	 622765	  980ad	fs/xfs/xfs.o
 617231	   3152	   3848	 624231	  98667	fs/xfs/xfs.o.old

Fallout:

 - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects
   the inode locked and xfs_qm_dqattach which does the locking around it,
   thus removing XFS_QMOPT_ILOCKED.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NEric Sandeen <sandeen@sandeen.net>

People continue to complain about this for weird reasons, but there's
really no point in keeping this typedef for a couple of users anyway.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NFelix Blyakher <felixb@sgi.com>

Currently we call from the nicely abstracted linux quotaops into a ugly
multiplexer just to split the calls out at the same boundary again.
Rewrite the quota ops handling to remove that obfucation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>

Get rid of various obsfucating wrappers for accessing the quota hash lock,
we only keep the accessors for accessing the mplist and freelist locks as
they encode a multi-level datastructure walk.  But make sure all of them
are defined in the same way as simple macros.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>

Now that we have a helper to test if a mutex is held use it instead of our
own little hacks.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>

Remove these macros which only obsfucated the code in rather nast ways.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>

The XFS_QMOPT_DQLOCK flag introduces major complexity in the quota subsystem
but isn't actually used anywhere.  So remove it and all the hazzles it
introduces.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NFelix Blyakher <felixb@sgi.com>

Remove the last of the macros-defined-to-static-functions.
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

We can have both a user and a group/project dquot locked at the same time,
as long as the user dquot is locked first.  Tell lockdep about that fact
by making the group/project dquots a different lock class.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>

xfs_dqlock2 locks two xfs_dquots, which is fine as it always locks the
dquot with the lower id first.  Use mutex_lock_nested to tell lockdep
about this fact.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>

We can have both a a quota hash chain and the per-mount list locked at
the same time.  But given that both use the same struct dqhash as list
head we have to tell lockdep that they are different lock classes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>

We can have both a user and a group/project dquot locked at the same time,
as long as the user dquot is locked first.  Tell lockdep about that fact
by making the group/project dquots a different lock class.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>

xfs_dqlock2 locks two xfs_dquots, which is fine as it always locks the
dquot with the lower id first.  Use mutex_lock_nested to tell lockdep
about this fact.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>

We can have both a a quota hash chain and the per-mount list locked at
the same time.  But given that both use the same struct dqhash as list
head we have to tell lockdep that they are different lock classes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>

Remove the last of the macros-defined-to-static-functions.
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Currently we explicitly call xfs_iflush on the quota, real-time and root
inodes from xfs_unmount_flush.  But we just called xfs_sync_inodes with
SYNC_ATTR and do an XFS_bflush aka xfs_flush_buftarg to make sure all inodes
are on disk already, so there is no need for these special cases.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>

The radix tree walks in xfs_sync_inodes_ag and xfs_qm_dqrele_all_inodes()
can find inodes that are still undergoing initialisation. Avoid
them by checking for the the XFS_INEW() flag once we have a reference
on the inode. This flag is cleared once the inode is properly initialised.

SGI-PV: 987246
Signed-off-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

gcc on ARM warns about an using an uninitialised variable
in xfs_qm_dqrele_all_inodes(). This is a real bug, but gcc
on x86_64 is not reporting this warning so it went unnoticed.

Fix the bug by bring the inode radix tree walk code up to
date with xfs_sync_inodes_ag().

SGI-PV: 987246
Signed-off-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

No need to parse the mount option into a structure before applying it to
struct xfs_mount.

The content of xfs_start_flags gets merged into xfs_parseargs. Calls
inbetween don't care and can use mount members instead of the args struct.

This patch uncovered that the mount option for shared filesystems wasn't
ever exposed on Linux. The code to handle it is #if 0'ed in this patch
pending a decision on this feature. I'll send a writeup about it to the
list soon.

SGI-PV: 987246

SGI-Modid: xfs-linux-melb:xfs-kern:32371a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDonald Douwsma <donaldd@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Change all the remaining AIL API functions that are passed struct
xfs_mount pointers to pass pointers directly to the struct xfs_ail being
used. With this conversion, all external access to the AIL is via the
struct xfs_ail. Hence the operation and referencing of the AIL is almost
entirely independent of the xfs_mount that is using it - it is now much
more tightly tied to the log and the items it is tracking in the log than
it is tied to the xfs_mount.

SGI-PV: 988143

SGI-Modid: xfs-linux-melb:xfs-kern:32353a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>