GCC 4.6 now warnings about variables set but not used.  Fix the trivially
fixable warnings of this sort.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

This patch adds support for 32bit project quota identifiers.

On disk format is backward compatible with 16bit projid numbers. projid
on disk is now kept in two 16bit values - di_projid_lo (which holds the
same position as old 16bit projid value) and new di_projid_hi (takes
existing padding) and converts from/to 32bit value on the fly.

xfs_admin (for existing fs), mkfs.xfs (for new fs) needs to be used
to enable PROJID32BIT support.
Signed-off-by: NArkadiusz Miśkiewicz <arekm@maven.pl>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

xfs_iput is just a small wrapper for xfs_iunlock + IRELE.  Having this
out of line wrapper means the trace events in those two can't track
their caller properly.  So just remove the wrapper and opencode the
unlock + rele in the few callers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>

Dmapi support was never merged upstream, but we still have a lot of hooks
bloating XFS for it, all over the fast pathes of the filesystem.

This patch drops over 700 lines of dmapi overhead.  If we'll ever get HSM
support in mainline at least the namespace events can be done much saner
in the VFS instead of the individual filesystem, so it's not like this
is much help for future work.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

The block number comes from bulkstat based inode lookups to shortcut
the mapping calculations. We ar enot able to trust anything from
bulkstat, so drop the block number as well so that the correct
lookups and mappings are always done.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Inode numbers may come from somewhere external to the filesystem
(e.g. file handles, bulkstat information) and so are inherently
untrusted. Rename the flag we use for these lookups to make it
obvious we are doing a lookup of an untrusted inode number and need
to verify it completely before trying to read it from disk.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The non-coherent bulkstat versionsthat look directly at the inode
buffers causes various problems with performance optimizations that
make increased use of just logging inodes.  This patch makes bulkstat
always use iget, which should be fast enough for normal use with the
radix-tree based inode cache introduced a while ago.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

So that fsr can attempt to get the fork offset of the temporary
inode it uses the same as the inode it is defragmenting, pass the
fork offset out in the bulkstat information.

The bulkstat structure has padding that has always been zeroed, so
userspace can tell if this field is set or not by use of the xattr
present flag and a non-zero value for the fork offset.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

We use the KM_LARGE flag to make kmem_alloc and friends use vmalloc
if necessary.  As we only need this for a few boot/mount time
allocations just switch to explicit vmalloc calls there.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

The use of an array for the per-ag structures requires reallocation
of the array when growing the filesystem. This requires locking
access to the array to avoid use after free situations, and the
locking is difficult to get right. To avoid needing to reallocate an
array, change the per-ag structures to an allocated object per ag
and index them using a tree structure.

The AGs are always densely indexed (hence the use of an array), but
the number supported is 2^32 and lookups tend to be random and hence
indexing needs to scale. A simple choice is a radix tree - it works
well with this sort of index.  This change also removes another
large contiguous allocation from the mount/growfs path in XFS.

The growing process now needs to change to only initialise the new
AGs required for the extra space, and as such only needs to
exclusively lock the tree for inserts. The rest of the code only
needs to lock the tree while doing lookups, and hence this will
remove all the deadlocks that currently occur on the m_perag_lock as
it is now an innermost lock. The lock is also changed to a spinlock
from a read/write lock as the hold time is now extremely short.

To complete the picture, the per-ag structures will need to be
reference counted to ensure that we don't free/modify them while
they are still in use.  This will be done in subsequent patch.
Signed-off-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

This is picking up on Felix's repost of Dave's patch to implement a
.dirty_inode method.  We really need this notification because
the VFS keeps writing directly into the inode structure instead
of going through methods to update this state.  In addition to
the long-known atime issue we now also have a caller in VM code
that updates c/mtime that way for shared writeable mmaps.  And
I found another one that no one has noticed in practice in the FIFO
code.

So implement ->dirty_inode to set i_update_core whenever the
inode gets externally dirtied, and switch the c/mtime handling to
the same scheme we already use for atime (always picking up
the value from the Linux inode).

Note that this patch also removes the xfs_synchronize_atime call
in xfs_reclaim it was superflous as we already synchronize the time
when writing the inode via the log (xfs_inode_item_format) or the
normal buffers (xfs_iflush_int).

In addition also remove the I_CLEAR check before copying the Linux
timestamps - now that we always have the Linux inode available
we can always use the timestamps in it.

Also switch to just using file_update_time for regular reads/writes -
that will get us all optimization done to it for free and make
sure we notice early when it breaks.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NFelix Blyakher <felixb@sgi.com>
Reviewed-by: NAlex Elder <aelder@sgi.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Currenly we have a xfs_inobt_lookup* variant for each comparism direction,
and all these get all three fields of the inobt records passed, while the
common case is just looking for the inode number and we have only marginally
more callers than xfs_inobt_lookup* variants.

So opencode a direct call to xfs_btree_lookup for the single case where we
need all fields, and replace xfs_inobt_lookup* with a xfs_inobt_looku that
just takes the inode number and the direction for all other callers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>
Signed-off-by: NFelix Blyakher <felixb@sgi.com>

Most callers of xfs_inobt_get_rec need to fill a xfs_inobt_rec_incore_t, and
those who don't yet are fine with a xfs_inobt_rec_incore_t, instead of the
three individual variables, too.  So just change xfs_inobt_get_rec to write
the output into a xfs_inobt_rec_incore_t directly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>
Signed-off-by: NFelix Blyakher <felixb@sgi.com>

A lot more functions could be made static, but they need
forward declarations; this does some easy ones, and also
found a few unused functions in the process.
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NFelix Blyakher <felixb@sgi.com>

A lot more functions could be made static, but they need
forward declarations; this does some easy ones, and also
found a few unused functions in the process.
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NFelix Blyakher <felixb@sgi.com>

Signed-off-by: NMalcolm Parsons <malcolm.parsons@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Two out of three are unused already, and the third is better done open-coded
with a comment describing what's going on here.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>

Remove the last of the macros-defined-to-static-functions.
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Remove the last of the macros-defined-to-static-functions.
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

The 32-bit xfs_blkstat_one handler was failing because
a size check checked whether the remaining (32-bit)
user buffer was less than the (64-bit) bulkstat buffer,
and failed with ENOMEM if so.  Move this check
into the respective handlers so that they check the
correct sizes.

Also, the formatters were returning negative errors
or positive bytes copied; this was odd in the positive
error value world of xfs, and handled wrong by at least
some of the callers, which treated the bytes returned
as an error value.  Move the bytes-used assignment
into the formatters.
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Currently the compat formatter was handled by passing
in "private_data" for the xfs_bulkstat_one formatter,
which was really just another formatter... IMHO this
got confusing.

Instead, just make a new xfs_bulkstat_one_compat
formatter for xfs_bulkstat, and call it via a wrapper.

Also, don't translate the ioctl nrs into their native
counterparts, that just clouds the issue; we're in a
compat handler anyway, just switch on the 32-bit cmds.
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Just pass down the XFS_IGET_* flags all the way down to xfs_imap instead
of translating them mid-way.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>

Most uses of struct xfs_imap are to map and inode to a buffer.  To avoid
copying around the inode location information we should just embedd a
strcut xfs_imap into the xfs_inode.  To make sure it doesn't bloat an
inode the im_len is changed to a ushort, which is fine as that's what
the users exepect anyway.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>

These names don't add any value at all over just using the numerical
values.

(First sent on October 9th)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>

Now that we have a separate xfs_icdinode_t for the in-core inode which
gets logged there is no need anymore for the xfs_dinode vs xfs_dinode_core
split - the fact that part of the structure gets logged through the inode
log item and a small part not can better be described in a comment.

All sizeof operations on the dinode_core either really wanted the
icdinode and are switched to that one, or had already added the size
of the agi unlinked list pointer.  Later both will be replaced with
helpers once we get the larger CRC-enabled dinode.

Removing the data and attribute fork unions also has the advantage that
xfs_dinode.h doesn't need to pull in every header under the sun.

While we're at it also add some more comments describing the dinode
structure.

(First sent on October 7th)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>

xfs_bulkstat only wants the dinode, offset and buffer from a given inode
number. Instead of using xfs_itobp on a fake inode which is complicated
and currently leads to leaks of the security data just use xfs_inotobp
which is designed to do exactly the kind of lookup xfs_bulkstat wants. The
only thing that's missing in xfs_inotobp is a flags paramter that let's us
pass down XFS_IMAP_BULKSTAT, but that can easily added.

SGI-PV: 987246

SGI-Modid: xfs-linux-melb:xfs-kern:32397a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>

From: Dave Chinner <dgc@sgi.com>

Because this is the first major generic btree routine this patch includes
some infrastrucure, first a few routines to deal with a btree block that
can be either in short or long form, second xfs_btree_read_buf_block,
which is the new central routine to read a btree block given a cursor, and
third the new xfs_btree_ptr_addr routine to calculate the address for a
given btree pointer record.

[hch: split out from bigger patch and minor adaptions]

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32190a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NBill O'Donnell <billodo@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>

xfs_btree_init_cursor contains close to little shared code for the
different btrees and will get even more non-common code in the future.
Split it up into one routine per btree type.

Because xfs_btree_dup_cursor needs to call the init routine for a generic
btree cursor add a new btree operation vector that contains a dup_cursor
method that initializes a new cursor based on an existing one.

The btree operations vector is based on an idea and code from Dave Chinner
and will grow more entries later during this series.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32176a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NBill O'Donnell <billodo@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>

To avoid having to initialise some fields of the XFS inode on every
allocation, we can use the slab init-once feature to initialise them. All
we have to guarantee is that when we free the inode, all it's entries are
in the initial state. Add asserts where possible to ensure debug kernels
check this initial state before freeing and after allocation.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31925a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

In various places we can just move a VFS_I call into the argument list of
called functions/macros instead of having a local bhv_vnode_t.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31776a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Replace XFS_ITOV() with the new VFS_I() inline.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31724a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

kmem_free() function takes (ptr, size) arguments but doesn't actually use
second one.

This patch removes size argument from all callsites.

SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31050a
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Unless XFS_IGET_CREATE is passed xfs_iget will return ENOENT if it
encounters an inode with di_mode == 0. Remove the duplicated checks in the
callers.

(the log recovery case is not touched for now)

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30898a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Mark it void.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30828a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

When pdflush is writing back inodes, it can get stuck on inode cluster
buffers that are currently under I/O. This occurs when we write data to
multiple inodes in the same inode cluster at the same time.

Effectively, delayed allocation marks the inode dirty during the data
writeback. Hence if the inode cluster was flushed during the writeback of
the first inode, the writeback of the second inode will block waiting for
the inode cluster write to complete before writing it again for the newly
dirtied inode.

Basically, we want to avoid this from happening so we don't block pdflush
and slow down all of writeback. Hence we introduce a non-blocking async
inode flush flag that pdflush uses. If this flag is set, we use
non-blocking operations (e.g. try locks) whereever we can to avoid
blocking or extra I/O being issued.

SGI-PV: 970925
SGI-Modid: xfs-linux-melb:xfs-kern:30501a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Remove macro-to-small-function indirection from xfs_sb.h, and remove some
which are completely unused.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30528a
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NDonald Douwsma <donaldd@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Currently XFS_IFORK_* and XFS_DFORK* are implemented by means of
XFS_CFORK* macros. But given that XFS_IFORK_* operates on an xfs_inode
that embedds and xfs_icdinode_core and XFS_DFORK_* operates on an
xfs_dinode that embedds a xfs_dinode_core one will have to do endian
swapping while the other doesn't. Instead of having the current mess with
the CFORK macros that have byteswapping and non-byteswapping version
(which are inconsistantly named while we're at it) just define each family
of the macros to stand by itself and simplify the whole matter.

A few direct references to the CFORK variants were cleaned up to use IFORK
or DFORK to make this possible.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30163a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NTim Shimmin <tes@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

The BPCSHIFT based macros, btoc*, ctob*, offtoc* and ctooff are either not
used or don't need to be used. The NDPP, NDPP, NBBY macros don't need to
be used but instead are replaced directly by PAGE_SIZE and PAGE_CACHE_SIZE
where appropriate. Initial patch and motivation from Nicolas Kaiser.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30096a
Signed-off-by: NTim Shimmin <tes@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

We need xfs_bulkstat() to report inode stat for inodes with link count
zero but reference count non zero.

The fix here:

http://oss.sgi.com/archives/xfs/2007-09/msg00266.html

changed this behavior and made xfs_bulkstat() to filter all unlinked
inodes including those that are not destroyed yet but held by reference.

The attached patch returns back to the original behavior by marking the
on-disk inode buffer "dirty" when di_mode is cleared (at that time both
inode link and reference counter are zero).

SGI-PV: 972004
SGI-Modid: xfs-linux-melb:xfs-kern:29914a
Signed-off-by: NVlad Apostolov <vapo@sgi.com>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>