- 17 2月, 2012 7 次提交
-
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Martin Hundebøll 提交于
Both translation tables and network coding use timeouts to do house keeping, so we might as well share the function used to compare a timestamp+timeout with current time. For readability and simplicity, the function is renamed to has_timed_out() and uses time_is_before_jiffies() instead of time_after(). Signed-off-by: NMartin Hundebøll <martin@hundeboll.net> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Martin Hundebøll 提交于
Signed-off-by: NMartin Hundebøll <martin@hundeboll.net> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Marek Lindner 提交于
Most of the values in that call are derived from the skb, so we can hand over the skb instead. Reported-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Sven Eckelmann 提交于
All batman-adv packets have a common 3 byte header. It can be used to share some code between different code paths, but it was never explicit stated that this header has to be always the same for all packets. Therefore, new code changes always have the problem that they may accidently introduce regressions by moving some elements around. A new structure is introduced that contains the common header and makes it easier visible that these 3 bytes have to be the same for all on-wire packets. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
(ttvn == 0) is currently used as initial condition. However this is not a good idea because ttvn gets the vale zero each time after reaching the maximum value (wrap around). For this reason a new flag is added in order to define whether a node has an initialised table or not. Moreover, after invoking tt_global_del_orig(), tt_initialised has to be set to false Reported-by: NAlexey Fisher <bug-track@fisher-privat.net> Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Tested-by: NAlexey Fisher <bug-track@fisher-privat.net> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
- 18 1月, 2012 5 次提交
-
-
由 Ben Pfaff 提交于
The logic to split up the list of datapaths into multiple Netlink messages was simply wrong, causing the list to be terminated after the first part. Only about the first 50 datapaths would be dumped. This fixes the problem. Reported-by: NPaul Ingram <paul@nicira.com> Signed-off-by: NBen Pfaff <blp@nicira.com> Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In commit 4ce3c183 (snmp: 64bit ipstats_mib for all arches), I forgot to change the /proc/net/dev_snmp6/xxx output for IP counters. percpu array is 64bit per counter but the folding still used the 'long' variant, and output garbage on 32bit arches. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
kmemcheck complains that ->redirect_genid doesn't get initialized. Presumably it should be set to zero. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Bug was introduced in commit c8f44aff. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
skb_checksum_help() has never done anything useful with skbs that require segmentation. Setting skb->ip_summed = CHECKSUM_NONE makes them invalid and provokes a later WARNing in skb_gso_segment(). Passing such an skb to skb_checksum_help() indicates a bug, so we should warn about it immediately. Move the warning from skb_gso_segment() into a shared function, and add gso_type and gso_size to it. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 1月, 2012 13 次提交
-
-
Remove WARN_ON and bad handling of SKB without destructor callback in caif_flow_cb. SKB without destructor cannot be handled as an error case. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Fix typo for the Vendor/Product Id for ST-Ericsson CAIF modems. Discovery is based on fixed USB vendor 0x04cc (ST-Ericsson), product-id 0x230f (NCM). Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
make C=2 CF="-D__CHECK_ENDIAN__" M=net And fix flowi4_init_output() prototype for sport Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shan Wei 提交于
For net part, remove duplicate included header. Signed-off-by: NShan Wei <davidshan@tencent.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
ethtool operations generally require the caller to hold RTNL and are not safe to call in atomic context. The device model provides this information for most devices; we'll only lose it for some old ISA drivers. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
br_fdb_cleanup() is run from timer interrupt, BH already masked. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Štefan Gula <steweg@gmail.com> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Helmut Schaa 提交于
All other code paths in sta_unblock synchronize with the network softirq by using local_bh_disable/enable. Do the same around ieee80211_sta_ps_deliver_wakeup. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Devendra Naga 提交于
remove version.h includes in net/openswitch/ as reported by make versioncheck. Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hiroaki SHIMODA 提交于
There is no store() method for inflight attribute in the tx-<n>/byte_queue_limits sysfs directory. So remove S_IWUSR bit. Signed-off-by: NHiroaki SHIMODA <shimoda.hiroaki@gmail.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jozsef Kadlecsik 提交于
If there was a dumping error in the middle, the set-specific variable was not zeroed out and thus the 'done' function of the dumping wrongly tried to release the already released reference of the set. The already released reference was caught by __ip_set_put and triggered a kernel BUG message. Reported by Jean-Philippe Menil. Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Jozsef Kadlecsik 提交于
Jan Engelhardt noticed when userspace requests a set type unknown to the kernel, it can lead to a loop due to the unsafe type module loading. The issue is fixed in this patch. Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Yoni Divinsky 提交于
In function ieee80211_tx_h_encrypt the var info was initialized from tx->skb, since the fucntion is called after the function ieee80211_tx_h_fragment tx->skb is not valid anymore. Signed-off-by: NYoni Divinsky <yoni.divinsky@ti.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jesper Juhl 提交于
We may leak the 'fwd_skb' we skb_copy() in ieee80211_rx_h_mesh_fwding() if we take the 'else' branch in the 'if' statement just below. If we take that branch we'll end up returning from the function and since we've not assigned 'fwd_skb' to anything at that point, we leak it when the variable goes out of scope. The simple fix seems to be to just kfree_skb(fwd_skb); just before we return. That is what this patch does. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 16 1月, 2012 2 次提交
-
-
由 Pablo Neira Ayuso 提交于
This patch partially reverts: 3d058d7b netfilter: rework user-space expectation helper support that was applied during the 3.2 development cycle. After this patch, the tree remains just like before patch bc01befd, that initially added the preliminary infrastructure. I decided to partially revert this patch because the approach that I proposed to resolve this problem is broken in NAT setups. Moreover, a new infrastructure will be submitted for the 3.3.x development cycle that resolve the existing issues while providing a neat solution. Since nobody has been seriously using this infrastructure in user-space, the removal of this feature should affect any know FOSS project (to my knowledge). Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Stephen Rothwell 提交于
Fixes this warning when CONFIG_IP6_NF_IPTABLES is not enabled: net/netfilter/xt_hashlimit.c: In function ‘hashlimit_init_dst’: net/netfilter/xt_hashlimit.c:448:9: warning: unused variable ‘frag_off’ [-Wunused-variable] Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 14 1月, 2012 2 次提交
-
-
由 Johannes Berg 提交于
When userspace attempts to authorize a station that is already authorized, nothing happens as you'd expect. Similarly, when it unauthorizes a station that is associated, nothing happens. However, when it unauthorizes a station that isn't even associated yet, we erroneously try to move the station to associated. This seems to happen occasionally as a result of a race when wpa_supplicant attempts to unauthorize the port in managed mode. Particularly with my new patches to keep stations, it can then move a station into ASSOCIATED state before we have really associated, which is really confusing. I introduced this bug in "mac80211: refactor station state transitions" Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 RongQing.Li 提交于
release idev when ip6_neigh_lookup failed in icmp6_dst_alloc Signed-off-by: NRongQing.Li <roy.qing.li@gmail.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 1月, 2012 4 次提交
-
-
由 Roland Dreier 提交于
rds_iw_flush_goal() just returns a count, but it is only called in one place and its return value is ignored there. So delete all the dead code. Signed-off-by: NRoland Dreier <roland@purestorage.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Adds an optional Random Early Detection on each SFQ flow queue. Traditional SFQ limits count of packets, while RED permits to also control number of bytes per flow, and adds ECN capability as well. 1) We dont handle the idle time management in this RED implementation, since each 'new flow' begins with a null qavg. We really want to address backlogged flows. 2) if headdrop is selected, we try to ecn mark first packet instead of currently enqueued packet. This gives faster feedback for tcp flows compared to traditional RED [ marking the last packet in queue ] Example of use : tc qdisc add dev $DEV parent 1:1 handle 10: est 1sec 4sec sfq \ limit 3000 headdrop flows 512 divisor 16384 \ redflowlimit 100000 min 8000 max 60000 probability 0.20 ecn qdisc sfq 10: parent 1:1 limit 3000p quantum 1514b depth 127 headdrop flows 512/16384 divisor 16384 ewma 6 min 8000b max 60000b probability 0.2 ecn prob_mark 0 prob_mark_head 4876 prob_drop 6131 forced_mark 0 forced_mark_head 0 forced_drop 0 Sent 1175211782 bytes 777537 pkt (dropped 6131, overlimits 11007 requeues 0) rate 99483Kbit 8219pps backlog 689392b 456p requeues 0 In this test, with 64 netperf TCP_STREAM sessions, 50% using ECN enabled flows, we can see number of packets CE marked is smaller than number of drops (for non ECN flows) If same test is run, without RED, we can check backlog is much bigger. qdisc sfq 10: parent 1:1 limit 3000p quantum 1514b depth 127 headdrop flows 512/16384 divisor 16384 Sent 1148683617 bytes 795006 pkt (dropped 0, overlimits 0 requeues 0) rate 98429Kbit 8521pps backlog 1221290b 841p requeues 0 Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Dave Taht <dave.taht@gmail.com> Tested-by: NDave Taht <dave.taht@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Glauber Costa 提交于
The logic of the current code is that whenever we destroy a cgroup that had its limit set (set meaning different than maximum), we should decrement the jump_label counter. Otherwise we assume it was never incremented. But what the code actually does is test for RES_USAGE instead of RES_LIMIT. Usage being different than maximum is likely to be true most of the time. The effect of this is that the key must become negative, and since the jump_label test says: !!atomic_read(&key->enabled); we'll have jump_labels still on when no one else is using this functionality. Signed-off-by: NGlauber Costa <glommer@parallels.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
commit a9b3cd7f (rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER) did a lot of incorrect changes, since it did a complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x, y). We miss needed barriers, even on x86, when y is not NULL. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 1月, 2012 5 次提交
-
-
由 Rusty Russell 提交于
Remove wrapper functions. This makes the allocation type explicit in all callers; I used GPF_KERNEL where it seemed obvious, left it at GFP_ATOMIC otherwise. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Since: commit 816c04fe Author: Christian Lamparter <chunkeey@googlemail.com> Date: Sat Apr 30 15:24:30 2011 +0200 mac80211: consolidate MIC failure report handling is possible to that we dereference rx->key == NULL when driver set RX_FLAG_MMIC_STRIPPED and not RX_FLAG_IV_STRIPPED and we are in promiscuous mode. This happen with rt73usb and rt61pci at least. Before the commit we always check rx->key against NULL, so I assume fix should be done in mac80211 (also mic_fail path has similar check). References: https://bugzilla.redhat.com/show_bug.cgi?id=769766 http://rt2x00.serialmonkey.com/pipermail/users_rt2x00.serialmonkey.com/2012-January/004395.html Cc: stable@vger.kernel.org # 3.0+ Reported-by: NStuart D Gathman <stuart@gathman.org> Reported-by: NKai Wohlfahrt <kai.scorpio@gmail.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
My patch to validate station flags broke compatibility with the old station flags setting where all flags are always set at once since it always set the mask as all possible flags which ended up being rejected later in the station add/modify code. Fix by parsing only the current flags in the old flags attribute -- new applications and new flags should use (and will now require) the new flags attribute where the mask is given by the application. Reported-and-tested-by: NThomas Hilber <ath9k-dev@toh.cx> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 1月, 2012 2 次提交
-
-
由 Sage Weil 提交于
Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Signed-off-by: NSage Weil <sage@newdream.net>
-