Max Vozeler reported:
>  Bug 13877 -  bogl-term broken with CONFIG_X86_PAT=y, works with =n
>
>  strace of bogl-term:
>  814   mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_SHARED, 4, 0)
>				 = -1 EAGAIN (Resource temporarily unavailable)
>  814   write(2, "bogl: mmaping /dev/fb0: Resource temporarily unavailable\n",
>	       57) = 57

PAT code maps the ISA memory range as WB in the PAT attribute, so that
fixed range MTRR registers define the actual memory type (UC/WC/WT etc).

But the upper level is_new_memtype_allowed() API checks are failing,
as the request here is for UC and the return tracked type is WB (Tracked type is
WB as MTRR type for this legacy range potentially will be different for each
4k page).

Fix is_new_memtype_allowed() by always succeeding the ISA address range
checks, as the null PAT (WB) and def MTRR fixed range register settings
satisfy the memory type needs of the applications that map the ISA address
range.
Reported-and-Tested-by: NMax Vozeler <xam@debian.org>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

With VMALLOC_END included in the calculation of MAXMEM (as of
2.6.28) it is no longer correct to also bump __VMALLOC_RESERVE
in reserve_top_address(). Doing so results in needlessly small
lowmem.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
LKML-Reference: <4A71DD2A020000780000D482@vpn.id2.novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The code was incorrectly reserving memtypes using the page
virtual address instead of the physical address. Furthermore,
the code was not ignoring highmem pages as it ought to.

( upstream does not pass in highmem pages yet - but upcoming
  graphics code will do it and there's no reason to not handle
  this properly in the CPA APIs.)

Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=13884Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: <stable@kernel.org>
Cc: dri-devel@lists.sourceforge.net
Cc: venkatesh.pallipadi@intel.com
LKML-Reference: <1249284345-7654-1-git-send-email-thellstrom@vmware.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Changeset 3869c4aa
that went in after 2.6.30-rc1 was a seemingly small change to _set_memory_wc()
to make it complaint with SDM requirements. But, introduced a nasty bug, which
can result in crash and/or strange corruptions when set_memory_wc is used.
One such crash reported here
http://lkml.org/lkml/2009/7/30/94

Actually, that changeset introduced two bugs.
* change_page_attr_set() takes &addr as first argument and can the addr value
  might have changed on return, even for single page change_page_attr_set()
  call. That will make the second change_page_attr_set() in this routine
  operate on unrelated addr, that can eventually cause strange corruptions
  and bad page state crash.
* The second change_page_attr_set() call, before setting _PAGE_CACHE_WC, should
  clear the earlier _PAGE_CACHE_UC_MINUS, as otherwise cache attribute will not
  be WC (will be UC instead).

The patch below fixes both these problems. Sending a single patch to fix both
the problems, as the change is to the same line of code. The change to have a
addr_copy is not very clean. But, it is simpler than making more changes
through various routines in pageattr.c.

A huge thanks to Jerome for reporting this problem and providing a simple test
case that helped us root cause the problem.
Reported-by: NJerome Glisse <glisse@freedesktop.org>
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20090730214319.GA1889@linux-os.sc.intel.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This functionality is needed to kmap_atomic() highmem pages that may
potentially have or are about to set up other mappings with
non-standard caching attributes.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

mm: Pass virtual address to [__]p{te,ud,md}_free_tlb()

Upcoming paches to support the new 64-bit "BookE" powerpc architecture
will need to have the virtual address corresponding to PTE page when
freeing it, due to the way the HW table walker works.

Basically, the TLB can be loaded with "large" pages that cover the whole
virtual space (well, sort-of, half of it actually) represented by a PTE
page, and which contain an "indirect" bit indicating that this TLB entry
RPN points to an array of PTEs from which the TLB can then create direct
entries. Thus, in order to invalidate those when PTE pages are deleted,
we need the virtual address to pass to tlbilx or tlbivax instructions.

The old trick of sticking it somewhere in the PTE page struct page sucks
too much, the address is almost readily available in all call sites and
almost everybody implemets these as macros, so we may as well add the
argument everywhere. I added it to the pmd and pud variants for consistency.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Howells <dhowells@redhat.com> [MN10300 & FRV]
Acked-by: NNick Piggin <npiggin@suse.de>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Need to clear both nodes and nodes_add state for start/end.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
LKML-Reference: <20090718065657.GA2898@basil.fritz.box>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: stable@kernel.org

Since commit 5fd29d6c ("printk: clean up handling of log-levels
and newlines"), the kernel logs segfaults like:

    <6>gnome-power-man[24509]: segfault at 20 ip 00007f9d4950465a sp 00007fffbb50fc70 error 4 in libgobject-2.0.so.0.2103.0[7f9d494f7000+45000]

with the extra "<6>" being KERN_INFO.  This happens because the
printk in show_signal_msg() started with KERN_CONT and then
used "%s" to pass in the real level; and KERN_CONT is no longer
an empty string, and printk only pays attention to the level at
the very beginning of the format string.

Therefore, remove the KERN_CONT from this printk, since it is
now actively causing problems (and never really made any
sense).
Signed-off-by: NRoland Dreier <roland@digitalvampire.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <874otjitkj.fsf@shaolin.home.digitalvampire.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Alex found that specjbb2005 still can not run with hugepages on an
x86-64 machine.  This only happens when numa is not compiled in.

The root cause: node_set_state will not set it back for us in that case,
so don't clear that when numa is not select in config

[ v2: use node_clear_state instead ]
Reported-and-Tested-by: NAlex Shi <alex.shi@intel.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 5fd29d6c ("printk: clean up
handling of log-levels and newlines") changed printk semantics.  printk
lines with multiple KERN_<level> prefixes are no longer emitted as
before the patch.

<level> is now included in the output on each additional use.

Remove all uses of multiple KERN_<level>s in formats.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This sparse warning:

  arch/x86/mm/init.c:83:16: warning: symbol 'check_efer' was not declared. Should it be static?

triggers because check_efer() is not decalared before using it.
asm/proto.h includes the declaration of check_efer(), so
including asm/proto.h to fix that - this also addresses the
sparse warning.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1246458263.6940.22.camel@hpdv5.satnam>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Nathan reported that

| commit 73d60b7f
| Author: Yinghai Lu <yinghai@kernel.org>
| Date:   Tue Jun 16 15:33:00 2009 -0700
|
|    page-allocator: clear N_HIGH_MEMORY map before we set it again
|
|    SRAT tables may contains nodes of very small size.  The arch code may
|    decide to not activate such a node.  However, currently the early boot
|    code sets N_HIGH_MEMORY for such nodes.  These nodes therefore seem to be
|    active although these nodes have no present pages.
|
|    For 64bit N_HIGH_MEMORY == N_NORMAL_MEMORY, so that works for 64 bit too

unintentionally and incorrectly clears the cpuset.mems cgroup attribute on
an i386 kvm guest, meaning that cpuset.mems can not be used.

Fix this by only clearing node_states[N_NORMAL_MEMORY] for 64bit only.
and need to do save/restore for that in find_zone_movable_pfn
Reported-by: NNathan Lynch <ntl@pobox.com>
Tested-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>,
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The init_gbpages() function is conditionally called from
init_memory_mapping() function. There are two call-sites where
this 'after_bootmem' condition can be true: setup_arch() and
mem_init() via pci_iommu_alloc().

Therefore, it's safe to move the call to init_gbpages() to
setup_arch() as it's always called before mem_init().

This removes an after_bootmem use - paving the way to remove
all uses of that state variable.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <Pine.LNX.4.64.0906221731210.19474@melkki.cs.Helsinki.FI>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

lpage allocator aliases a PMD page for each cpu and returns whatever
is unused to the page allocator.  When the pageattr of the recycled
pages are changed, this makes the two aliases point to the overlapping
regions with different attributes which isn't allowed and known to
cause subtle data corruption in certain cases.

This can be handled in simliar manner to the x86_64 highmap alias.
pageattr code should detect if the target pages have PMD alias and
split the PMD alias and synchronize the attributes.

pcpur allocator is updated to keep the allocated PMD pages map sorted
in ascending address order and provide pcpu_lpage_remapped() function
which binary searches the array to determine whether the given address
is aliased and if so to which address.  pageattr is updated to use
pcpu_lpage_remapped() to detect the PMD alias and split it up as
necessary from cpa_process_alias().

Jan Beulich spotted the original problem and incorrect usage of vaddr
instead of laddr for lookup.

With this, lpage percpu allocator should work correctly.  Re-enable
it.

[ Impact: fix subtle lpage pageattr bug and re-enable lpage ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NJan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>

Reorganize cpa_process_alias() so that new alias condition can be
added easily.

Jan Beulich spotted problem in the original cleanup thread which
incorrectly assumed the two existing conditions were mutially
exclusive.

[ Impact: code reorganization ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>

This allows the callers to now pass down the full set of FAULT_FLAG_xyz
flags to handle_mm_fault().  All callers have been (mechanically)
converted to the new calling convention, there's almost certainly room
for architectures to clean up their code and then add FAULT_FLAG_RETRY
when that support is added.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's really not right to use 'access_ok()', since that is meant for the
normal "get_user()" and "copy_from/to_user()" accesses, which are done
through the TLB, rather than through the page tables.

Why? access_ok() does both too few, and too many checks.  Too many,
because it is meant for regular kernel accesses that will not honor the
'user' bit in the page tables, and because it honors the USER_DS vs
KERNEL_DS distinction that we shouldn't care about in GUP.  And too few,
because it doesn't do the 'canonical' check on the address on x86-64,
since the TLB will do that for us.

So instead of using a function that isn't meant for this, and does
something else and much more complicated, just do the real rules: we
don't want the range to overflow, and on x86-64, we want it to be a
canonical low address (on 32-bit, all addresses are canonical).
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Improve a few details in perfcounter call-chain recording that
makes use of fast-GUP:

- Use ACCESS_ONCE() to observe the pte value. ptes are fundamentally
  racy and can be changed on another CPU, so we have to be careful
  about how we access them. The PAE branch is already careful with
  read-barriers - but the non-PAE and 64-bit side needs an
  ACCESS_ONCE() to make sure the pte value is observed only once.

- make the checks a bit stricter so that we can feed it any kind of
  cra^H^H^H user-space input ;-)
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Prefetch instructions can generate spurious faults on certain
models of older CPUs. The faults themselves cannot be stopped
and they can occur pretty much anywhere - so the way we solve
them is that we detect certain patterns and ignore the fault.

There is one small path of code where we must not take faults
though: the #PF handler execution leading up to the reading
of the CR2 (the faulting address). If we take a fault there
then we destroy the CR2 value (with that of the prefetching
instruction's) and possibly mishandle user-space or
kernel-space pagefaults.

It turns out that in current upstream we do exactly that:

	prefetchw(&mm->mmap_sem);

	/* Get the faulting address: */
	address = read_cr2();

This is not good.

So turn around the order: first read the cr2 then prefetch
the lock address. Reading cr2 is plenty fast (2 cycles) so
delaying the prefetch by this amount shouldnt be a big issue
performance-wise.

[ And this might explain a mystery fault.c warning that sometimes
  occurs on one an old AMD/Semptron based test-system i have -
  which does have such prefetch problems. ]

Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
LKML-Reference: <20090616030522.GA22162@Krystal>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Introduce a gup_fast() variant which is usable from IRQ/NMI context.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
CC: Nick Piggin <npiggin@suse.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We've had some troubles in the past with weird instructions. This
patch adds a self-test framework which can be used to verify that
a certain set of opcodes are decoded correctly. Of course, the
opcodes which are not tested can still give the wrong results.

In short, this is just a safeguard to catch unintentional changes
in the opcode decoder. It does not mean that errors can't still
occur!

[rebased for mainline inclusion]
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

This adds support for tracking the initializedness of memory that
was allocated with the page allocator. Highmem requests are not
tracked.

Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>

[build fix for !CONFIG_KMEMCHECK]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

[rebased for mainline inclusion]
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

As these are allocated using the page allocator, we need to pass
__GFP_NOTRACK before we add page allocator support to kmemcheck.
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

The hooks that we modify are:
- Page fault handler (to handle kmemcheck faults)
- Debug exception handler (to hide pages after single-stepping
  the instruction that caused the page fault)

Also redefine memset() to use the optimized version if kmemcheck is
enabled.

(Thanks to Pekka Enberg for minimizing the impact on the page fault
handler.)

As kmemcheck doesn't handle MMX/SSE instructions (yet), we also disable
the optimized xor code, and rely instead on the generic C implementation
in order to avoid false-positive warnings.
Signed-off-by: NVegard Nossum <vegardno@ifi.uio.no>

[whitespace fixlet]
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

[rebased for mainline inclusion]
Signed-off-by: NVegard Nossum <vegardno@ifi.uio.no>

Lets use kmemcheck_pte_lookup() in kmemcheck_fault() instead of
open-coding it there.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

This patch moves the CONFIG_X86_64 ifdef out of kmemcheck_opcode_decode() by
introducing a version of the function that always returns false for
CONFIG_X86_32.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

Multiple ifdef'd definitions of the same global variable is ugly and
error-prone. Fix that up.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

The "Bugs, beware!" printout during is cute but confuses users that something
bad happened so change the text to the more boring "Initialized" message.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

This patch reorders code in error.c so that we can get rid of the forward
declarations.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

kmemcheck/shadow.c needs to include <linux/module.h> to prevent
the following warnings:

linux-next-20080724/arch/x86/mm/kmemcheck/shadow.c:64: warning : data definition has no type or storage class
linux-next-20080724/arch/x86/mm/kmemcheck/shadow.c:64: warning : type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
linux-next-20080724/arch/x86/mm/kmemcheck/shadow.c:64: warning : parameter names (without types) in function declaration
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: vegardno@ifi.uio.no
Cc: penberg@cs.helsinki.fi
Cc: akpm <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

General description: kmemcheck is a patch to the linux kernel that
detects use of uninitialized memory. It does this by trapping every
read and write to memory that was allocated dynamically (e.g. using
kmalloc()). If a memory address is read that has not previously been
written to, a message is printed to the kernel log.

Thanks to Andi Kleen for the set_memory_4k() solution.

Andrew Morton suggested documenting the shadow member of struct page.
Signed-off-by: NVegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

[export kmemcheck_mark_initialized]
[build fix for setup_max_cpus]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

[rebased for mainline inclusion]
Signed-off-by: NVegard Nossum <vegardno@ifi.uio.no>

kernel_physical_mapping_init() could be called in memory hotplug path.

[ Impact: fix potential crash with memory hotplug ]
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
LKML-Reference: <20090612045752.GA827@sli10-desk.sh.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Only one cpu is there, just call __flush_tlb for it. Fixes the following boot
warning on x86:

  [    0.000000] Memory: 885032k/915540k available (5993k kernel code, 29844k reserved, 3842k data, 428k init, 0k highmem)
  [    0.000000] virtual kernel memory layout:
  [    0.000000]     fixmap  : 0xffe17000 - 0xfffff000   (1952 kB)
  [    0.000000]     vmalloc : 0xf8615000 - 0xffe15000   ( 120 MB)
  [    0.000000]     lowmem  : 0xc0000000 - 0xf7e15000   ( 894 MB)
  [    0.000000]       .init : 0xc19a5000 - 0xc1a10000   ( 428 kB)
  [    0.000000]       .data : 0xc15da4bb - 0xc199af6c   (3842 kB)
  [    0.000000]       .text : 0xc1000000 - 0xc15da4bb   (5993 kB)
  [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  [    0.000000] ------------[ cut here ]------------
  [    0.000000] WARNING: at kernel/smp.c:369 smp_call_function_many+0x50/0x1b0()
  [    0.000000] Hardware name: System Product Name
  [    0.000000] Modules linked in:
  [    0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip #52504
  [    0.000000] Call Trace:
  [    0.000000]  [<c104aa16>] warn_slowpath_common+0x65/0x95
  [    0.000000]  [<c104aa58>] warn_slowpath_null+0x12/0x15
  [    0.000000]  [<c1073bbe>] smp_call_function_many+0x50/0x1b0
  [    0.000000]  [<c1037615>] ? do_flush_tlb_all+0x0/0x41
  [    0.000000]  [<c1037615>] ? do_flush_tlb_all+0x0/0x41
  [    0.000000]  [<c1073d4f>] smp_call_function+0x31/0x58
  [    0.000000]  [<c1037615>] ? do_flush_tlb_all+0x0/0x41
  [    0.000000]  [<c104f635>] on_each_cpu+0x26/0x65
  [    0.000000]  [<c10374b5>] flush_tlb_all+0x19/0x1b
  [    0.000000]  [<c1032ab3>] zap_low_mappings+0x4d/0x56
  [    0.000000]  [<c15d64b5>] ? printk+0x14/0x17
  [    0.000000]  [<c19b42a8>] mem_init+0x23d/0x245
  [    0.000000]  [<c19a56a1>] start_kernel+0x17a/0x2d5
  [    0.000000]  [<c19a5347>] ? unknown_bootoption+0x0/0x19a
  [    0.000000]  [<c19a5039>] __init_begin+0x39/0x41
  [    0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Commit c9690998 (x86: memtest: remove
64-bit division) introduced following compile warning:

arch/x86/mm/memtest.c: In function 'memtest':
arch/x86/mm/memtest.c:56: warning: comparison of distinct pointer types lacks a cast
arch/x86/mm/memtest.c:58: warning: comparison of distinct pointer types lacks a cast
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Using gcc 3.3.5 a "make allmodconfig" + "CONFIG_KVM=n"
triggers a build error:

 arch/x86/mm/built-in.o(.init.text+0x43f7): In function `__change_page_attr':
 arch/x86/mm/pageattr.c:114: undefined reference to `__udivdi3'
 make: *** [.tmp_vmlinux1] Error 1

The culprit turned out to be a division in arch/x86/mm/memtest.c
For more info see this thread:

  http://marc.info/?l=linux-kernel&m=124416232620683

The patch entirely removes the division that caused the build
error.

[ Impact: build fix with certain GCC versions ]
Reported-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: xiyou.wangcong@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <20090608170939.GB12431@alberich.amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13302

On x86 and x86-64, it is possible that page tables are shared beween
shared mappings backed by hugetlbfs.  As part of this,
page_table_shareable() checks a pair of vma->vm_flags and they must match
if they are to be shared.  All VMA flags are taken into account, including
VM_LOCKED.

The problem is that VM_LOCKED is cleared on fork().  When a process with a
shared memory segment forks() to exec() a helper, there will be shared
VMAs with different flags.  The impact is that the shared segment is
sometimes considered shareable and other times not, depending on what
process is checking.

What happens is that the segment page tables are being shared but the
count is inaccurate depending on the ordering of events.  As the page
tables are freed with put_page(), bad pmd's are found when some of the
children exit.  The hugepage counters also get corrupted and the Total and
Free count will no longer match even when all the hugepage-backed regions
are freed.  This requires a reboot of the machine to "fix".

This patch addresses the problem by comparing all flags except VM_LOCKED
when deciding if pagetables should be shared or not for hugetlbfs-backed
mapping.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <starlight@binnacle.cx>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cleanup cpa_flush_array() to avoid back to back on_each_cpu() calls.

[ Impact: optimizes fix 0af48f42 ]
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

cpa_flush_array seems to prefer wbinvd() over clflush at 4M threshold.
clflush needs to be done on only one CPU as per instruction definition.
wbinvd() however, should be done on all CPUs.

[ Impact: fix missing flush which could cause data corruption ]
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

wbinvd is supported on all CPUs 486 or later. But,
pageattr.c is checking x86_model >= 4 before wbinvd(), which looks like
an oversight bug. It was first introduced at one place by changeset
d7c8f21a and got copied over to second
place in the same file later.

[ Impact: fix missing cache flush on early-model CPUs, potential data corruption ]
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>