printk and friends can now format bitmaps using '%*pb[l]'.  cpumask
and nodemask also provide cpumask_pr_args() and nodemask_pr_args()
respectively which can be used to generate the two printf arguments
necessary to format the specified cpu/nodemask.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 6edb2a8a introduced
an array map_pages that contains the addresses returned by
kmap_atomic. However, when unmapping those pages, map_pages[0]
is unmapped before map_pages[1], breaking the nesting requirement
as specified in the documentation for kmap_atomic/kunmap_atomic.

This was caught by the highmem debug code present in kunmap_atomic.
Fix the loop to do the unmapping properly.

Link: http://lkml.kernel.org/r/1418871056-6614-1-git-send-email-markivx@codeaurora.org

Cc: stable@vger.kernel.org # 3.5+
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Reported-by: NLime Yang <limey@codeaurora.org>
Signed-off-by: NVikram Mulukutla <markivx@codeaurora.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The top level trace array is treated a little different than the
instances, as it has to deal with more of the general tracing.
The tr->dir is the tracing directory, which is an immutable
dentry, where as the tr->dir of instances are the dentry that
was created, and can be destroyed later. These should have different
functions accessing them.

As only tracing_init_dentry() deals with the top level array, fold
the code for it into that function, and remove the trace_init_dentry_tr()
that was also used by the instances to get their directory dentry.

Add a tracing_get_dentry() to just get the tracing dir entry for
instances as well as the top level array.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

tracing_init_dentry_tr() is not used outside of trace.c, it should
be static.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Remove the output-confusing newline below:

[    0.191328]
**********************************************************
[    0.191493] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.191586] **                                                      **
...

Link: http://lkml.kernel.org/r/1422375440-31970-1-git-send-email-bp@alien8.deSigned-off-by: NBorislav Petkov <bp@suse.de>
[ added an extra '\n' by itself, to keep what it was suppose to do ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

tracing_init_dentry() will soon return NULL as a valid pointer for the
top level tracing directroy. NULL can not be used as an error value.
Instead, switch to ERR_PTR() and check the return status with
IS_ERR().
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

trace_init() calls init_ftrace_syscalls() and then calls trace_event_init()
which also calls init_ftrace_syscalls(). It makes more sense to only
call it from trace_event_init().

Calling it twice wastes memory, as it allocates the syscall events twice,
and loses the first copy of it.

Link: http://lkml.kernel.org/r/54AF53BD.5070303@huawei.com
Link: http://lkml.kernel.org/r/20150115040505.930398632@goodmis.orgReported-by: NWang Nan <wangnan0@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Taking the global mutex "trace_types_lock" in the trace_pipe files
causes a bottle neck as most the pipe files can be read per cpu
and there's no reason to serialize them.

The current_trace variable was given a ref count and it can not
change when the ref count is not zero. Opening the trace_pipe
files will up the ref count (and decremented on close), so that
the lock no longer needs to be taken when accessing the
current_trace variable.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When one of the trace pipe files are being read (by either the trace_pipe
or trace_pipe_raw), do not allow the current_trace to change. By adding
a ref count that is incremented when the pipe files are opened, will
prevent the current_trace from being changed.

This will allow for the removal of the global trace_types_lock from
reading the pipe buffers (which is currently a bottle neck).
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add the kernel command line tp_printk option that will have tracepoints
that are active sent to printk() as well as to the trace buffer.

Passing "tp_printk" will activate this. To turn it off, the sysctl
/proc/sys/kernel/tracepoint_printk can have '0' echoed into it. Note,
this only works if the cmdline option is used. Echoing 1 into the sysctl
file without the cmdline option will have no affect.

Note, this is a dangerous option. Having high frequency tracepoints send
their data to printk() can possibly cause a live lock. This is another
reason why this is only active if the command line option is used.

Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanosSuggested-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Enabling tracepoints at boot up can be very useful. The tracepoint
can be initialized right after RCU has been. There's no need to
wait for the early_initcall() to be called. That's too late for some
things that can use tracepoints for debugging. Move the logic to
enable tracepoints out of the initcalls and into init/main.c to
right after rcu_init().

This also allows trace_printk() to be used early too.

Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos
Link: http://lkml.kernel.org/r/20141214164104.307127356@goodmis.orgReviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The initial reason for this patch is that I noticed that:

	if (len > TRACE_BUF_SIZE)

is off by one.  In this code, if len == TRACE_BUF_SIZE, then it means we
have truncated the last character off the output string.  If we truncate
two or more characters then we exit without printing.

After some discussion, we decided that printing truncated data is better
than not printing at all so we should just use vscnprintf() and remove
the test entirely.  Also I have updated memcpy() to copy the NUL char
instead of setting the NUL in a separate step.

Link: http://lkml.kernel.org/r/20141127155752.GA21914@mwandaSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

s,produciton,production
Signed-off-by: NFrans Klaver <frans.klaver@xsens.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

To be really paranoid about writing out of bound data in
trace_printk_seq(), add another check of len compared to size.

Link: http://lkml.kernel.org/r/20141119144004.GB2332@dhcp128.suse.czSuggested-by: NPetr Mladek <pmladek@suse.cz>
Reviewed-by: NPetr Mladek <pmladek@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

As the seq_buf->len will soon be +1 size when there's an overflow, we
must use trace_seq_used() or seq_buf_used() methods to get the real
length. This will prevent buffer overflow issues if just the len
of the seq_buf descriptor is used to copy memory.

Link: http://lkml.kernel.org/r/20141114121911.09ba3d38@gandalf.local.homeReported-by: NPetr Mladek <pmladek@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The function tracing_fill_pipe_page() logic is a little confusing with the
use of count saving the seq.len and reusing it.

Instead of subtracting a number that is calculated from the saved
value of the seq.len from seq.len, just save the seq.len at the start
and if we need to reset it, just assign it again.

When the seq_buf overflow is len == size + 1, the current logic will
break. Changing it to use a saved length for resetting back to the
original value is more robust and will work when we change the way
seq_buf sets the overflow.

Link: http://lkml.kernel.org/r/20141118161546.GJ23958@pathway.suse.czReviewed-by: NPetr Mladek <pmladek@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Create a seq_buf layer that trace_seq sits on. The seq_buf will not
be limited to page size. This will allow other usages of seq_buf
instead of a hard set PAGE_SIZE one that trace_seq has.

Link: http://lkml.kernel.org/r/20141104160221.864997179@goodmis.org
Link: http://lkml.kernel.org/r/20141114011412.170377300@goodmis.orgTested-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Reviewed-by: NPetr Mladek <pmladek@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Adding a trace_seq_has_overflowed() which returns true if the trace_seq
had too much written into it allows us to simplify the code.

Instead of checking the return value of every call to trace_seq_printf()
and friends, they can all be called normally, and at the end we can
return !trace_seq_has_overflowed() instead.

Several functions also return TRACE_TYPE_PARTIAL_LINE when the trace_seq
overflowed and TRACE_TYPE_HANDLED otherwise. Another helper function
was created called trace_handle_return() which takes a trace_seq and
returns these enums. Using this helper function also simplifies the
code.

This change also makes it possible to remove the return values of
trace_seq_printf() and friends. They should instead just be
void functions.

Link: http://lkml.kernel.org/r/20141114011410.365183157@goodmis.orgReviewed-by: NPetr Mladek <pmladek@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Consecutive seq_puts calls with literal strings can be merged to a
single call. This reduces the size of the generated code, and can also
lead to slight .rodata reduction (because of fewer nul and padding
bytes). It should also shave a off a few clock cycles.

Link: http://lkml.kernel.org/r/1415479332-25944-3-git-send-email-linux@rasmusvillemoes.dkSigned-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Using seq_printf to print a simple string or a single character is a
lot more expensive than it needs to be, since seq_puts and seq_putc
exist.

These patches do

  seq_printf(m, s) -> seq_puts(m, s)
  seq_printf(m, "%s", s) -> seq_puts(m, s)
  seq_printf(m, "%c", c) -> seq_putc(m, c)

Subsequent patches will simplify further.

Link: http://lkml.kernel.org/r/1415479332-25944-2-git-send-email-linux@rasmusvillemoes.dkSigned-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

According to the documentation, adding "traceoff_on_warning" to the boot
command line should be enough to enable the feature. But right now it is
necessary to specify "traceoff_on_warning=". Along with fixing that, also
verify if the value passed, if any, is either "0" or "off".

Link: http://lkml.kernel.org/r/20141112231400.GL12281@uudg.orgSigned-off-by: NLuis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If the read loop in trace_buffers_splice_read() keeps failing due to
memory allocation failures without reading even a single page then this
function will keep busy looping.

Remove the risk for that by exiting the function if memory allocation
failures are seen.

Link: http://lkml.kernel.org/r/1415309167-2373-2-git-send-email-rabin@rab.inSigned-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

On a !PREEMPT kernel, attempting to use trace-cmd results in a soft
lockup:

 # trace-cmd record -e raw_syscalls:* -F false
 NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61]
 ...
 Call Trace:
  [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90
  [<ffffffff81092e25>] wait_on_pipe+0x35/0x40
  [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0
  [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0
  [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40
  [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290
  [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0
  [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
  [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60
  [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
  [<ffffffff8112415d>] do_splice_to+0x6d/0x90
  [<ffffffff81126971>] SyS_splice+0x7c1/0x800
  [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8

The problem is this: tracing_buffers_splice_read() calls
ring_buffer_wait() to wait for data in the ring buffers.  The buffers
are not empty so ring_buffer_wait() returns immediately.  But
tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1,
meaning it only wants to read a full page.  When the full page is not
available, tracing_buffers_splice_read() tries to wait again with
ring_buffer_wait(), which again returns immediately, and so on.

Fix this by adding a "full" argument to ring_buffer_wait() which will
make ring_buffer_wait() wait until the writer has left the reader's
page, i.e.  until full-page reads will succeed.

Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in

Cc: stable@vger.kernel.org # 3.16+
Fixes: b1169cc6 ("tracing: Remove mock up poll wait function")
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Expose the new NMI safe accessor to clock monotonic to the tracer.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

The "uptime" trace clock added in:

    commit 8aacf017
    tracing: Add "uptime" trace clock that uses jiffies

has wraparound problems when the system has been up more
than 1 hour 11 minutes and 34 seconds. It converts jiffies
to nanoseconds using:
        (u64)jiffies_to_usecs(jiffy) * 1000ULL
but since jiffies_to_usecs() only returns a 32-bit value, it
truncates at 2^32 microseconds.  An additional problem on 32-bit
systems is that the argument is "unsigned long", so fixing the
return value only helps until 2^32 jiffies (49.7 days on a HZ=1000
system).

Avoid these problems by using jiffies_64 as our basis, and
not converting to nanoseconds (we do convert to clock_t because
user facing API must not be dependent on internal kernel
HZ values).

Link: http://lkml.kernel.org/p/99d63c5bfe9b320a3b428d773825a37095bf6a51.1405708254.git.tony.luck@intel.com

Cc: stable@vger.kernel.org # 3.10+
Fixes: 8aacf017 "tracing: Add "uptime" trace clock that uses jiffies"
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently, tracing_thresh works only if we specify it before selecting
function_graph tracer. If we do the opposite, tracing_thresh will change
it's value, but it will not be applied.
To fix it, we add update_thresh callback which is called whenever
tracing_thresh is updated and for function_graph tracer we register
handler which reinitializes tracer depending on tracing_thresh.

Link: http://lkml.kernel.org/p/20140718111727.GA3206@stfomichev-desktop.yandex.netSigned-off-by: NStanislav Fomichev <stfomichev@yandex-team.ru>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The TRACE_ITER_PRINTK check in __trace_puts/__trace_bputs is missing,
so add it, to be consistent with __trace_printk/__trace_bprintk.
Those functions are all called by the same function: trace_printk().

Link: http://lkml.kernel.org/p/51E7A7D6.8090900@huawei.com

Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: Nzhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently trace option stacktrace is not applicable for
trace_printk with constant string argument, the reason is
in __trace_puts/__trace_bputs ftrace_trace_stack is missing.

In contrast, when using trace_printk with non constant string
argument(will call into __trace_printk/__trace_bprintk), then
trace option stacktrace is workable, this inconstant result
will confuses users a lot.

Link: http://lkml.kernel.org/p/51E7A7C9.9040401@huawei.com

Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nzhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Disabling reading and writing to the trace file should not be able to
disable all function tracing callbacks. There's other users today
(like kprobes and perf). Reading a trace file should not stop those
from happening.

Cc: stable@vger.kernel.org # 3.0+
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

It was missing the description of set_graph_notrace file.  Add it.

Link: http://lkml.kernel.org/p/1402590233-22321-5-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This fixes checkpatch warning:

"WARNING: debugfs_remove(NULL) is safe this check is probably not required"
Link: http://lkml.kernel.org/p/1403802871-8599-1-git-send-email-fabf@skynet.beSigned-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The trace_seq_*() functions are a nice utility that allows users to manipulate
buffers with printf() like formats. It has its own trace_seq.h header in
include/linux and should be in its own file. Being tied with trace_output.c
is rather awkward.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The freeing of an instance, if max data is configured, there will be
per cpu data structures created. But these are not freed when the instance
is deleted, which causes a memory leak.

A new helper function is added that frees the individual buffers within a
trace array, instead of duplicating the code. This way changes made for one
are applied to the other (normal buffer vs max buffer).

Link: http://lkml.kernel.org/r/87k38pbake.fsf@sejong.aot.lge.comReported-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The recent addition of saved_cmdlines_size file had some remaining
(minor - mostly coding style) issues.  Fix them by passing pointer
name to sizeof() and using scnprintf().

Link: http://lkml.kernel.org/p/1402384295-23680-1-git-send-email-namhyung@kernel.org

Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The per_cpu buffers are created one per possible CPU. But these do
not mean that those CPUs are online, nor do they even exist.

With the addition of the ring buffer polling, it assumes that the
caller polls on an existing buffer. But this is not the case if
the user reads trace_pipe from a CPU that does not exist, and this
causes the kernel to crash.

Simple fix is to check the cpu against buffer bitmask against to see
if the buffer was allocated or not and return -ENODEV if it is
not.

More updates were done to pass the -ENODEV back up to userspace.

Link: http://lkml.kernel.org/r/5393DB61.6060707@oracle.comReported-by: NSasha Levin <sasha.levin@oracle.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When an instance is created, it also gets a snapshot ring buffer
allocated (with minimum of pages). But when it is deleted the snapshot
buffer is not. There was a helper function added to match the allocation
of these ring buffers to a way to free them, but it wasn't used by
the deletion of an instance. Using that helper function solves this
memory leak.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Yoshihiro Yunomae reported that the ring buffer data for a trace
instance does not get properly cleaned up when it fails. He proposed
a patch that manually cleaned the data up and addad a bunch of labels.
The labels are not needed because all trace array is allocated with
a kzalloc which initializes it to 0 and all kfree()s can take a NULL
pointer and will ignore it.

Adding a new helper function free_trace_buffers() that can also take
null buffers to free the buffers that were allocated by
allocate_trace_buffers().

Link: http://lkml.kernel.org/r/20140605223522.32311.31664.stgit@yunodevelReported-by: NYoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Introduce saved_cmdlines_size file for changing the number of saved pid-comms.
saved_cmdlines currently stores 128 command names using SAVED_CMDLINES, but
'no-existing processes' names are often lost in saved_cmdlines when we
read the trace data. So, by introducing saved_cmdlines_size file, we can
now change the 128 command names saved to something much larger if needed.

When we write a value to saved_cmdlines_size, the number of the value will
be stored in pid-comm list:

	# echo 1024 > /sys/kernel/debug/tracing/saved_cmdlines_size

Here, 1024 command names can be stored. The default number is 128 and the maximum
number is PID_MAX_DEFAULT (=32768 if CONFIG_BASE_SMALL is not set). So, if we
want to avoid losing any command names, we need to set 32768 to
saved_cmdlines_size.

We can read the maximum number of the list:

	# cat /sys/kernel/debug/tracing/saved_cmdlines_size
	128

Link: http://lkml.kernel.org/p/20140605012427.22115.16173.stgit@yunodevelSigned-off-by: NYoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If allocation of the max_buffer fails on boot up, the error path will
free both per_cpu data structures from the buffers. With the new redesign
of the code, those structures are freed if allocations failed. That is,
the helper function that allocates the buffers will free the per cpu data
on failure. No need to do it again. In fact, the second free will cause
a bug as the code can not handle a double free.

Link: http://lkml.kernel.org/p/20140603042803.27308.30956.stgit@yunodevelSigned-off-by: NYoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>