Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace as needed.  Build testing
revealed some implicit header usage that was fixed up accordingly.

Note that some bool/obj-y instances remain since module.h is
the header for some exception table entry stuff, and for things
like __init_or_module (code that is tossed when MODULES=n).
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160714001901.31603-4-paul.gortmaker@windriver.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Some subarchitectures (such as vSMP) need to slightly adjust the
underlying APIC structure. Add an APIC post-initialization callback
to 'struct x86_platform_ops' for this purpose and use it for
adjusting the APIC structure on vSMP systems.
Signed-off-by: NIdo Yariv <ido@wizery.com>
Acked-by: NShai Fultheim <shai@scalemp.com>
Link: http://lkml.kernel.org/r/1338675095-27260-1-git-send-email-ido@wizery.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Apic probe now looks at the apic drivers listed in the
.apicdrivers section. Remove apic_probe[] and make each apic
driver static.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Tested-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: gorcunov@openvz.org
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110521005526.341718626@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

This will eliminate the need for apic_probe[], as the probing
now will happen based on the apic drivers order in the
.apcidrivers section.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Tested-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: gorcunov@openvz.org
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110521005526.164277071@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Use the unused probe routine in the apic driver to finalize the
apic model selection. This cleans up the
default_setup_apic_routing() and this probe routine in future
can also be used for doing any apic model specific
initialisation.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.247458931@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Interrupt-remapping gets enabled very early in the boot, as it determines the
apic mode that the processor can use. And the current code enables the vt-d
fault handling before the setup_local_APIC(). And hence the APIC LDR registers
and data structure in the memory may not be initialized. So the vt-d fault
handling in logical xapic/x2apic modes were broken.

Fix this by enabling the vt-d fault handling in the end_local_APIC_setup()

A cleaner fix of enabling fault handling while enabling intr-remapping
will be addressed for v2.6.38. [ Enabling intr-remapping determines the
usage of x2apic mode and the apic mode determines the fault-handling
configuration. ]
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
LKML-Reference: <20101201062244.541996375@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: stable@kernel.org [v2.6.32+]
Acked-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Move enable_IR_x2apic() inside the default_setup_apic_routing(),
and for SMP platforms, move the default_setup_apic_routing() after
smp_sanity_check(). This cleans up the code that tries to avoid multiple
calls to default_setup_apic_routing() when smp_sanity_check() fails (which
goes through the APIC_init_uniprocessor() path).
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20100827181049.173087246@sbsiddha-MOBL3.sc.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

We need to fall back from logical-flat APIC mode to physical-flat mode
when we have more than 8 CPUs.  However, in the presence of CPU
hotplug(with bios listing not enabled but possible cpus as disabled cpus in
MADT), we have to consider the number of possible CPUs rather than
the number of current CPUs; otherwise we may cross the 8-CPU boundary
when CPUs are added later.

32bit apic code can use more cleanups (like the removal of vendor checks in
32bit default_setup_apic_routing()) and more unifications with 64bit code.
Yinghai has some patches in works already. This patch addresses the boot issue
that is reported in the virtualization guest context.

[ hpa: incorporated function annotation feedback from Yinghai Lu ]
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1265767304.2833.19.camel@sbs-t61.sc.intel.com>
Acked-by: NShaohui Zheng <shaohui.zheng@intel.com>
Reviewed-by: NYinghai Lu <yinghai@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

We can use logical flat mode if there are <= 8 logical cpu's
(irrespective of physical apic id values).  This will enable simplified
and efficient IPI and device interrupt routing on such platforms.

This has been tested to work on both Intel and AMD platforms.
Exceptions like IBM summit platform which can't use logical flat mode
are addressed by using OEM platform checks.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Chris McDermott <lcm@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Revert commit 2fbd07a5, as this commit
breaks an IBM platform with quad-core Xeon cpu's.

According to Suresh, this might be an IBM platform issue, as on other
Intel platforms with <= 8 logical cpu's, logical flat mode works fine
irespective of physical apic id values (inline with the xapic
architecture).

Revert this for now because of the IBM platform breakage.

Another version will be re-submitted after the complete analysis.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On Intel platforms, we can use logical flat mode if there are <= 8
logical cpu's (irrespective of physical apic id values). This will
enable simplified and efficient IPI and device interrupt routing on
such platforms.

Fix the relevant comments while we are at it.

We can clean up default_setup_apic_routing() by using apic->probe()
but that is a different item.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: "yinghai@kernel.org" <yinghai@kernel.org>
LKML-Reference: <1253327399.3948.747.camel@sbs-t61.sc.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

2.6.31-rc7 does not boot on vSMP systems:

[    8.501108] CPU31: Thermal monitoring enabled (TM1)
[    8.501127] CPU 31 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    8.650254] CPU31: Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 04
[    8.710324] Brought up 32 CPUs
[    8.713916] Total of 32 processors activated (162314.96 BogoMIPS).
[    8.721489] ERROR: parent span is not a superset of domain->span
[    8.727686] ERROR: domain->groups does not contain CPU0
[    8.733091] ERROR: groups don't span domain->span
[    8.737975] ERROR: domain->cpu_power not set
[    8.742416]

Ravikiran Thirumalai bisected it to:

| commit 2759c328
| x86: don't call read_apic_id if !cpu_has_apic

The problem is that on vSMP systems the CPUID derived
initial-APICIDs are overlapping - so we need to fall
back on hard_smp_processor_id() which reads the local
APIC.

Both come from the hardware (influenced by firmware
though) so it's a tough call which one to trust.

Doing the quirk expresses the vSMP property properly
and also does not affect other systems, so we go for
this solution instead of a revert.
Reported-and-Tested-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shai Fultheim <shai@scalex86.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <4A944D3C.5030100@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

KVM would like to provide x2APIC interface to a guest without emulating
interrupt remapping device. The reason KVM prefers guest to use x2APIC
is that x2APIC interface is better virtualizable and provides better
performance than mmio xAPIC interface:

 - msr exits are faster than mmio (no page table walk, emulation)
 - no need to read back ICR to look at the busy bit
 - one 64 bit ICR write instead of two 32 bit writes
 - shared code with the Hyper-V paravirt interface

Included patch changes x2APIC enabling logic to enable it even if IR
initialization failed, but kernel runs under KVM and no apic id is
greater than 255 (if there is one spec requires BIOS to move to x2apic
mode before starting an OS).

-v2: fix build
-v3: fix bug causing compiler warning
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Sheng Yang <sheng@linux.intel.com>
Cc: "avi@redhat.com" <avi@redhat.com>
LKML-Reference: <20090720122417.GR5638@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add x2apic_supported() to clean up CONFIG_X86_X2APIC checks.

Fix CONFIG_INTR_REMAP checks.

[ Impact: cleanup ]
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: dwmw2@infradead.org
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Weidong Han <weidong.han@intel.com>
LKML-Reference: <20090420200450.128993000@linux-os.sc.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Clean up #ifdefs and replace them with helper functions.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Impact: interface augmentation (not yet used)

Enable fault handling flow for intr-remapping aswell. Fault handling
code now shared by both dma-remapping and intr-remapping.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Impact: cleanup

x86_quirks->update_apic() calling looks crazy. so try to remove it:

 1. every apic take wakeup_cpu member directly
 2. separate es7000_apic to es7000_apic_cluster
 3. use uv_wakeup_cpu directly
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If BIOS hands over the control to OS in legacy xapic mode, select
legacy xapic related ops in the early apic probe and shift to x2apic
ops later in the boot sequence, only after enabling x2apic mode.

If BIOS hands over the control in x2apic mode, select x2apic related
ops in the early apic probe.

This fixes the early boot panic, where we were selecting x2apic ops,
while the cpu is still in legacy xapic mode.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the 32-bit extended-arch APIC drivers to arch/x86/kernel/apic/
too, and rename apic_64.c to probe_64.c.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

arch/x86/kernel/ is getting a bit crowded, and the APIC
drivers are scattered into various different files.

Move them to arch/x86/kernel/apic/*, and also remove
the 'gen' prefix from those which had it.

Also move APIC related functionality: the IO-APIC driver,
the NMI and the IPI code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Now that all APIC code is consolidated there's nothing 'gen' about
apics anymore - so rename 'struct genapic' to 'struct apic'.

This shortens the code and is nicer to read as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Remove genapic.h and remove all references to it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- make oprofile build
- select X86_X2APIC from X86_UV - it relies on it
- export genapic for oprofile modular build
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

make it simpler, don't need have one extra struct.

v2: fix the sgi_uv build
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

so could deselect x2apic
and INTR_REMAP will select x2apic
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Our send_IPI_*() methods and definitions are a twisted mess: the same
symbol is defined to different things depending on .config details,
in a non-transparent way.

 - spread out the quirks into separately named per apic driver methods

 - prefix the standard PC methods with default_

 - get rid of wrapper macro obfuscation

 - clean up various details
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros

 - remove namespace clash on 64-bit
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: refactor code

x86 subarchitectures each defined a "acpi_madt_oem_check()" method,
which could be an inline function, or an extern, or a static function,
and which was also the name of a genapic field.

Untangle this namespace spaghetti by setting ->acpi_madt_oem_check()
to NULL on those subarchitectures that have no detection quirks,
and rename the other ones (summit, es7000) that do.

Also change default_acpi_madt_oem_check() to handle NULL entries,
and clean its control flow up as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Rename genapic-> to apic-> references because in a future chagne we'll
open-code all the indirect calls (instead of obscuring them via macros),
so we want this reference to be as short as possible.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make X86 SGI Ultraviolet support configurable. Saves about 13K of text size
on my modest config.

   text    data     bss     dec     hex filename
6770537 1158680  694356 8623573  8395d5 vmlinux
6757492 1157664  694228 8609384  835e68 vmlinux.nouv
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix wakeup_secondary_cpu with hotplug

We can not put that into x86_quirks, because that is __initdata.
So try to move that to genapic, and add update_genapic in x86_quirks.

later we even could use that stub to:

 1. autodetect CONFIG_ES7000_CLUSTERED_APIC
 2. more correct inquire_remote_apic with apic_verbosity setting.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Exports needed by the GRU driver.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

intr_remapping_enabled get assigned later, so need to check that
in setup_apic_routing
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

introducing an APIC handling probing abstraction:

 static struct genapic *apic_probe[] __initdata = {
	&apic_x2apic_uv_x,
	&apic_x2apic_phys,
	&apic_x2apic_cluster,
	&apic_physflat,
	NULL,
 };

This way we can remove UV, x2apic specific code from genapic_64.c and
move them to their specific genapic files.

[ v2: fix compiling when CONFIG_ACPI is not set ]
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

x2apic Physical mode  support. By default we will use x2apic cluster mode.
x2apic physical mode can be selected using "x2apic_phys" boot parameter.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: akpm@linux-foundation.org
Cc: arjan@linux.intel.com
Cc: andi@firstfloor.org
Cc: ebiederm@xmission.com
Cc: jbarnes@virtuousgeek.org
Cc: steiner@sgi.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

x2apic support.  Interrupt-remapping must be enabled before enabling x2apic,
this is needed to ensure that IO interrupts continue to work properly after the
cpu mode is changed to x2apic(which uses 32bit extended physical/cluster
apic id).

On systems where apicid's are > 255, BIOS can handover the control to OS in
x2apic mode. Or if the OS handover was in legacy xapic mode, check
if it is capable of x2apic mode. And if we succeed in enabling
Interrupt-remapping, then we can enable x2apic mode in the CPU.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: akpm@linux-foundation.org
Cc: arjan@linux.intel.com
Cc: andi@firstfloor.org
Cc: ebiederm@xmission.com
Cc: jbarnes@virtuousgeek.org
Cc: steiner@sgi.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

x2apic cluster mode support.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: akpm@linux-foundation.org
Cc: arjan@linux.intel.com
Cc: andi@firstfloor.org
Cc: ebiederm@xmission.com
Cc: jbarnes@virtuousgeek.org
Cc: steiner@sgi.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Introduce self IPI op for genapic.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: akpm@linux-foundation.org
Cc: arjan@linux.intel.com
Cc: andi@firstfloor.org
Cc: ebiederm@xmission.com
Cc: jbarnes@virtuousgeek.org
Cc: steiner@sgi.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the read_apic_id()  to genapic routines.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: akpm@linux-foundation.org
Cc: arjan@linux.intel.com
Cc: andi@firstfloor.org
Cc: ebiederm@xmission.com
Cc: jbarnes@virtuousgeek.org
Cc: steiner@sgi.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

a multi-socket test-system with 3 or 4 ioapics, when 4 dualcore cpus or
2 quadcore cpus installed, needs to switch to bigsmp or physflat.

CPU apic id is [4,11] instead of [0,7], and we need to check max apic
id instead of cpu numbers.

also add check for 32 bit when acpi is not compiled in or acpi=off.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>