- 03 12月, 2008 5 次提交
-
-
由 Artem Bityutskiy 提交于
Introduce a new data structure which contains all debugging stuff inside. This is cleaner than having debugging stuff directly in 'c'. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Kukkonen Mika 提交于
I have a habit of compiling kernel with EXTRA_CFLAGS="-Wextra -Wno-unused -Wno-sign-compare -Wno-missing-field-initializers" and so fs/ubifs/key.h give lots (~10) of these every time: CC fs/ubifs/tnc_misc.o In file included from fs/ubifs/ubifs.h:1725, from fs/ubifs/tnc_misc.c:30: fs/ubifs/key.h: In function 'key_r5_hash': fs/ubifs/key.h:64: warning: comparison of unsigned expression >= 0 is always true fs/ubifs/key.h: In function 'key_test_hash': fs/ubifs/key.h:81: warning: comparison of unsigned expression >= 0 is always true This patch fixes the warnings. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
It is very handy to be able to change default UBIFS compressor via mount options. Introduce -o compr=<name> mount option support. Currently only "none", "lzo" and "zlib" compressors are supported. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Save a 4 bytes of RAM per 'struct inode' by stroring inode compression type in bit-filed, instead of using 'int'. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
If data does not compress, it is better to leave it uncompressed because we'll read it faster then. So do not compress data if we save less than 64 bytes. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 22 11月, 2008 3 次提交
-
-
由 Artem Bityutskiy 提交于
To avoid memory allocation failure during bulk-read, pre-allocate a bulk-read buffer, so that if there is only one bulk-reader at a time, it would just use the pre-allocated buffer and would not do any memory allocation. However, if there are more than 1 bulk- reader, then only one reader would use the pre-allocated buffer, while the other reader would allocate the buffer for itself. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Bulk-read allocates 128KiB or more using kmalloc. The allocation starts failing often when the memory gets fragmented. UBIFS still works fine in this case, because it falls-back to standard (non-optimized) read method, though. This patch teaches bulk-read to allocate exactly the amount of memory it needs, instead of allocating 128KiB every time. This patch is also a preparation to the further fix where we'll have a pre-allocated bulk-read buffer as well. For example, now the @bu object is prepared in 'ubifs_bulk_read()', so we could path either pre-allocated or allocated information to 'ubifs_do_bulk_read()' later. Or teaching 'ubifs_do_bulk_read()' not to allocate 'bu->buf' if it is already there. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Bulk-read allocates a lot of memory with 'kmalloc()', and when it is/gets fragmented 'kmalloc()' fails with a scarry warning. But because bulk-read is just an optimization, UBIFS keeps working fine. Supress the warning by passing __GFP_NOWARN option to 'kmalloc()'. This patch also introduces a macro for the magic 128KiB constant. This is just neater. Note, this is not really fixes the problem we had, but just hides the warnings. The further patches fix the problem. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 07 11月, 2008 1 次提交
-
-
由 Adrian Hunter 提交于
The LPT may have gaps in it because initially empty LEBs are not added by mkfs.ubifs - because it does not know how many there are. Then UBIFS allocates empty LEBs in the reverse order that they are discovered i.e. they are added to, and removed from, the front of a list. That creates a gap in the middle of the LPT. The function dirtying the LPT tree (for the purpose of small model garbage collection) assumed that a gap could only occur at the very end of the LPT and stopped dirtying prematurely, which in turn resulted in the LPT running out of space - something that is designed to be impossible. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
- 06 11月, 2008 3 次提交
-
-
由 Artem Bityutskiy 提交于
We print 'ino_t' type using '%lu' printk() placeholder, but this results in many warnings when compiling for Alpha platform. Fix this by adding (unsingned long) casts. Fixes these warnings: fs/ubifs/journal.c:693: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/journal.c:1131: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/dir.c:163: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/tnc.c:2680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/tnc.c:2700: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/replay.c:1066: warning: format '%lu' expects type 'long unsigned int', but argument 7 has type 'ino_t' fs/ubifs/orphan.c:108: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:135: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:142: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:154: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:159: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:451: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:539: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:612: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:843: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:856: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1438: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1443: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1475: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1495: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:1591: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1671: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1674: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1699: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1788: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1821: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1833: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1924: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1932: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1938: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1945: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1953: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1960: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1967: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1973: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1988: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1991: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:2009: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ino_t' Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Harvey Harrison 提交于
Noticed by sparse: fs/ubifs/file.c:75:2: warning: restricted __le64 degrades to integer fs/ubifs/file.c:629:4: warning: restricted __le64 degrades to integer fs/ubifs/dir.c:431:3: warning: restricted __le64 degrades to integer This should be checked to ensure the ubifs_assert is working as intended, I've done the suggested annotation in this patch. fs/ubifs/sb.c:298:6: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:298:6: expected int [signed] [assigned] tmp fs/ubifs/sb.c:298:6: got restricted __le64 [usertype] <noident> fs/ubifs/sb.c:299:19: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:299:19: expected restricted __le64 [usertype] atime_sec fs/ubifs/sb.c:299:19: got int [signed] [assigned] tmp fs/ubifs/sb.c:300:19: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:300:19: expected restricted __le64 [usertype] ctime_sec fs/ubifs/sb.c:300:19: got int [signed] [assigned] tmp fs/ubifs/sb.c:301:19: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:301:19: expected restricted __le64 [usertype] mtime_sec fs/ubifs/sb.c:301:19: got int [signed] [assigned] tmp This looks like a bugfix as your tmp was a u32 so there was truncation in the atime, mtime, ctime value, probably not intentional, add a tmp_le64 and use it here. fs/ubifs/key.h:348:9: warning: cast to restricted __le32 fs/ubifs/key.h:348:9: warning: cast to restricted __le32 fs/ubifs/key.h:419:9: warning: cast to restricted __le32 Read from the annotated union member instead. fs/ubifs/recovery.c:175:13: warning: incorrect type in assignment (different base types) fs/ubifs/recovery.c:175:13: expected unsigned int [unsigned] [usertype] save_flags fs/ubifs/recovery.c:175:13: got restricted __le32 [usertype] flags fs/ubifs/recovery.c:186:13: warning: incorrect type in assignment (different base types) fs/ubifs/recovery.c:186:13: expected restricted __le32 [usertype] flags fs/ubifs/recovery.c:186:13: got unsigned int [unsigned] [usertype] save_flags Do byteshifting at compile time of the flag value. Annotate the saved_flags as le32. fs/ubifs/debug.c:368:10: warning: cast to restricted __le32 fs/ubifs/debug.c:368:10: warning: cast from restricted __le64 Should be checked if the truncation was intentional, I've changed the printk to print the full width. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Remove the "UBIFS background thread ubifs_bgd0_0 started" message. We kill the background thread when we switch to R/O mode, and start it again whan we switch to R/W mode. OLPC is doing this many times during boot, and we see this message many times as well, which is irritating. So just kill the message. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 19 10月, 2008 3 次提交
-
-
由 Geert Uytterhoeven 提交于
Update the comment for ubifs_compress(), which incorrectly states that it returnsa success/failure indicator. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
It is better to print "Reserved for root" than "Reserved pool size", because it is more obvious for users what this means. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Adrian Hunter 提交于
Fixes the following Oops: BUG: unable to handle kernel paging request at f8d24000 IP: [<f8ff0657>] :ubifs:ubifs_unpack_bits+0xcd/0x231 *pde = 34333067 *pte = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: deflate zlib_deflate lzo lzo_decompress lzo_compress ubifs ubi nandsim nand nand_ids nand_ecc mtd nfsd lockd sunrpc exportfs [last unloaded: nand_ecc] Pid: 7450, comm: sync Not tainted (2.6.27-rc8-ubifs-2.6 #27) EIP: 0060:[<f8ff0657>] EFLAGS: 00010206 CPU: 0 EIP is at ubifs_unpack_bits+0xcd/0x231 [ubifs] EAX: 00000000 EBX: 00000000 ECX: d7e43dc0 EDX: 0000ff00 ESI: 00000004 EDI: f8d23ffe EBP: d7e43db4 ESP: d7e43d8c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process sync (pid: 7450, ti=d7e42000 task=eb6f9530 task.ti=d7e42000) Stack: 00000400 c0103db4 dc5e8090 d7e43dc0 d7e43dc0 d7e43dc4 0000001c 00000004 f496d1e0 f8d23ffc d7e43dd4 f8ffac7e f8d23ffe 00000000 f8d23ffe f2b7af68 f496d1e0 f8d23ffc d7e43e2c f8ffadc5 00000000 0001f000 00000000 c03b10a7 Call Trace: [<c0103db4>] ? restore_nocheck_notrace+0x0/0xe [<f8ffac7e>] ? is_a_node+0x43/0x92 [ubifs] [<f8ffadc5>] ? dbg_check_ltab+0xf8/0x5c9 [ubifs] [<c03b10a7>] ? mutex_lock_nested+0x1b2/0x2a0 [<f8ffc86e>] ? ubifs_lpt_start_commit+0x49/0xecb [ubifs] [<c03b0ef3>] ? mutex_unlock+0xd/0xf [<f8fef017>] ? ubifs_tnc_start_commit+0x1cf/0xef8 [ubifs] [<f8fe65d8>] ? do_commit+0x18f/0x52d [ubifs] [<f8fe69f6>] ? ubifs_run_commit+0x80/0xca [ubifs] [<f8fd8d35>] ? ubifs_sync_fs+0xdb/0xf6 [ubifs] [<c0181a07>] ? sync_filesystems+0xc6/0x10c [<c019f279>] ? do_sync+0x3b/0x6a [<c019f2ba>] ? sys_sync+0x12/0x18 [<c0103ced>] ? sysenter_do_call+0x12/0x35 ======================= Code: 4d ec 89 01 8b 45 e8 89 10 89 d8 89 f1 d3 e8 85 c0 74 07 29 d6 83 fe 20 75 2a 89 d8 83 c4 1c 5b 5e 5f 5d c3 0f b6 57 01 c1 e2 08 <0f> b6 47 02 c1 e0 10 09 c2 0f b6 07 09 c2 0f b EIP: [<f8ff0657>] ubifs_unpack_bits+0xcd/0x231 [ubifs] SS:ESP 0068:d7e43d8c ---[ end trace 1bbb4c407a6dd816 ]--- Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
- 14 10月, 2008 1 次提交
-
-
由 Steven Whitehouse 提交于
This is a much better version of a previous patch to make the parser tables constant. Rather than changing the typedef, we put the "const" in all the various places where its required, allowing the __initconst exception for nfsroot which was the cause of the previous trouble. This was posted for review some time ago and I believe its been in -mm since then. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 9月, 2008 22 次提交
-
-
由 Adrian Hunter 提交于
'is_a_node()' function was reading from a buffer before checking the buffer length, resulting in an OOPS as follows: BUG: unable to handle kernel paging request at f8f74002 IP: [<f8f9783f>] :ubifs:ubifs_unpack_bits+0xca/0x233 *pde = 19e95067 *pte = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ubifs ubi mtdchar bio2mtd mtd brd video output [last unloaded: mtd] Pid: 6414, comm: integck Not tainted (2.6.27-rc6ubifs34 #23) EIP: 0060:[<f8f9783f>] EFLAGS: 00010246 CPU: 0 EIP is at ubifs_unpack_bits+0xca/0x233 [ubifs] EAX: 00000000 EBX: f6090630 ECX: d9badcfc EDX: 00000000 ESI: 00000004 EDI: f8f74002 EBP: d9badcec ESP: d9badcc0 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process integck (pid: 6414, ti=d9bac000 task=f727dae0 task.ti=d9bac000) Stack: 00000006 f7306240 00000002 00000000 d9badcfc d9badd00 0000001c 00000000 f6090630 f6090630 f8f74000 d9badd10 f8fa1cc9 00000000 f8f74002 00000000 f8f74002 f60fe128 f6090630 f8f74000 d9badd68 f8fa1e46 00000000 0001e000 Call Trace: [<f8fa1cc9>] ? is_a_node+0x30/0x90 [ubifs] [<f8fa1e46>] ? dbg_check_ltab+0x11d/0x5bd [ubifs] [<f8fa388f>] ? ubifs_lpt_start_commit+0x42/0xed3 [ubifs] [<c038e76a>] ? mutex_unlock+0x8/0xa [<f8f9625d>] ? ubifs_tnc_start_commit+0x1c8/0xedb [ubifs] [<f8f8d90b>] ? do_commit+0x187/0x523 [ubifs] [<c038e76a>] ? mutex_unlock+0x8/0xa [<f8f7ca17>] ? bud_wbuf_callback+0x22/0x28 [ubifs] [<f8f8dd1d>] ? ubifs_run_commit+0x76/0xc0 [ubifs] [<f8f8032c>] ? ubifs_sync_fs+0xd2/0xe6 [ubifs] [<c01a2e97>] ? vfs_quota_sync+0x0/0x17e [<c01a5ba6>] ? quota_sync_sb+0x26/0xbb [<c01a2e97>] ? vfs_quota_sync+0x0/0x17e [<c01a5c5d>] ? sync_dquots+0x22/0x12c [<c0173d1b>] ? __fsync_super+0x19/0x68 [<c0173d75>] ? fsync_super+0xb/0x19 [<c0174065>] ? generic_shutdown_super+0x22/0xe7 [<c01a31fc>] ? vfs_quota_off+0x0/0x5fd [<f8f7cf4d>] ? ubifs_kill_sb+0x31/0x35 [ubifs] [<c01741f9>] ? deactivate_super+0x5e/0x71 [<c0187610>] ? mntput_no_expire+0x82/0xe4 [<c0187905>] ? sys_umount+0x4c/0x2f6 [<c0187bc8>] ? sys_oldumount+0x19/0x1b [<c0103b71>] ? sysenter_do_call+0x12/0x25 ======================= Code: c1 f8 03 8d 04 07 8b 4d e8 89 01 8b 45 e4 89 10 89 d8 89 f1 d3 e8 85 c0 74 07 29 d6 83 fe 20 75 2a 89 d8 83 c4 20 5b 5e 5f 5d EIP: [<f8f9783f>] ubifs_unpack_bits+0xca/0x233 [ubifs] SS:ESP 0068:d9badcc0 ---[ end trace 1f02572436518c13 ]--- Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Adrian Hunter 提交于
Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Adrian Hunter 提交于
Also add debugging checks for LPT size and separate out c->check_lpt_free from unrelated bitfields. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Adrian Hunter 提交于
Bulk-read skips uptodate pages but this was putting its array index out and causing it to treat subsequent pages as holes. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Adrian Hunter 提交于
Make garbage collection try to keep data nodes from the same inode together and in ascending order. This improves performance when reading those nodes especially when bulk-read is used. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Adrian Hunter 提交于
sync_fs can be called even if the file system is mounted read-only. Ensure the commit is not run in that case. Reported-by: NZoltan Sogor <weth@inf.u-szeged.hu> Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Artem Bityutskiy 提交于
Commit the journal when the FS is sync'ed. This will make statfs provide better free space report. And we anyway advice our users to sync the FS if they want better statfs report. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
'dbg_dump_inode()' is quite outdated and does not print all the fileds. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Znode may refer both data nodes and indexing nodes Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
We cannot store bit-fields together if the processes which change them may race, unless we serialize them. Thus, move the nospc and nospc_rp bit-fields eway from the mount option/constant bit-fields, to avoid races. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Adrian Hunter 提交于
Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Adrian Hunter 提交于
The comparison was working, but more by accident than design. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Artem Bityutskiy 提交于
The "bulk_read" and "no_chk_data_crc" have only 2 values - 0 and 1. We already have bit-fields in corresponding data structers, so make "bulk_read" and "no_chk_data_crc" bit-fields as well. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
When UBIFS switches to R/O mode because of an error, it is reasonable to enable data CRC checking. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Adrian Hunter 提交于
When inserting into a full znode it is split into two znodes. Because data node keys are usually consecutive, it is better to try to keep them together. This patch does a better job of that. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Adrian Hunter 提交于
UBIFS read performance can be improved by skipping the CRC check when data nodes are read. This option can be used if the underlying media is considered to be highly reliable. Note that CRCs are always checked for metadata. Read speed on Arm platform with OneNAND goes from 19 MiB/s to 27 MiB/s with data CRC checking disabled. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Adrian Hunter 提交于
Some flash media are capable of reading sequentially at faster rates. UBIFS bulk-read facility is designed to take advantage of that, by reading in one go consecutive data nodes that are also located consecutively in the same LEB. Read speed on Arm platform with OneNAND goes from 17 MiB/s to 19 MiB/s. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
-
由 Julien Brunel 提交于
In case of error, the function kthread_create returns an ERR pointer, but never returns a NULL pointer. So a NULL test that comes before an IS_ERR test should be deleted. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @match_bad_null_test@ expression x, E; statement S1,S2; @@ x = kthread_create(...) ... when != x = E * if (x == NULL) S1 else S2 // </smpl> Signed-off-by: NJulien Brunel <brunel@diku.dk> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
'ubifs_get_lprops()' and 'ubifs_release_lprops()' basically wrap mutex lock and unlock. We have them because we want lprops subsystem be separate and as independent as possible. And we planned better locking rules for lprops. Anyway, because they are short, it is better to inline them. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Hirofumi Nakagawa 提交于
IS_ERR() macro already has unlikely(), so do not use constructions like 'if (unlikely(IS_ERR())'. Signed-off-by: NHirofumi Nakagawa <hnakagawa@miraclelinux.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
This commit adds a reserved pool size print and tweaks the prints to make them look nicer. It also fixes and cleans-up some comments. Additionally, it deletes some blank lines to make the code look a little nicer. In other words, nothing essential. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 18 9月, 2008 1 次提交
-
-
由 Alexander Beregalov 提交于
fs/ubifs/dir.c:428: warning: format '%llu' expects type 'long long unsigned int', but argument 5 has type 'long unsigned int' fs/ubifs/debug.c:541: warning: format '%llu' expects type 'long long unsigned int', but argument 2 has type 'long unsigned int' Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 17 9月, 2008 1 次提交
-
-
由 Adrian Hunter 提交于
The assert was not valid because one of the variables 'taken_empty_lebs' has transient values out of sync with the other variables. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-