Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

They are doing the same on all generations anyway.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DCE 3.1 and 3.2 should be programmed in a different way than DCE 2 and
DCE 3. The order of setting registers and sets of registers are
different.
It's still unsure how we will handle DCE 3.1 vs. DCE 3.2, since they
have few differences as well.
For now separate DCE 2 and DCE 3 path, so we can work on it without a
risk of breaking DCE 3.1+.

This has been tested for possible regressions on DCE32 HD4550 (RV710).
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only VCE 2.0 support so far.

v2: squashing multiple patches into this one
v3: add IRQ support for CIK, major cleanups,
    basic code documentation
v4: remove HAINAN from chipset list
Signed-off-by: NChristian König <christian.koenig@amd.com>

For btc and newer, we may modify the power state depending
on the circumstances.  Use the modified state rather than
the base state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fill in asic family specific versions rather than
using the generic version.  This lets us handle asic
specific differences more easily.  In this case, we
disable sw swapping of the rtpr writeback value on
r6xx+ since the hw does it for us.  Fixes bogus
rptr readback on BE systems.

v2: remove missed cpu_to_le32(), add comments
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make sure interrupts are enabled
before we enable thermal interrupts.
Also, don't powergate uvd, etc. until after
the ring tests.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make sure interrupts are enabled
before we enable thermal interrupts.
Also, don't powergate uvd until after
the ring tests.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make sure interrupts are enabled
before we enable thermal interrupts.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to wait to enable cg and pg until after
ring tests. Also make sure interrupts are enabled
before we enable thermal interrupts.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to wait to enable cg and pg until after
ring tests. Also make sure interrupts are enabled
before we enable thermal interrupts.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make sure interrupts are enabled
before we enable thermal interrupts.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make sure interrupts are enabled before we enable
thermal interrupts.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To workaround bugs and/or certain limits it's sometimes
useful to fall back to waiting on fences.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The DMA ring seems to be stable now.

v2: remove pt_ring_index as well
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Uses the CP ring rather than the DMA ring.  Useful
for debugging and benchmarking.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds the enable_bapm callback for kb/kv.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds the enable_bapm callback for trinity.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Certain r6xx boards use the same power state for both UVD
and other things.  Since we don't support UVD on r6xx boards
at the moment, there was no callback installed for setting
the UVD clocks, however, on systems that use the same power
state, this leads to a NULL pointer dereference.  Fill
in a stubbed out implementation for now to avoid the crash.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=66963Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: "3.11" <stable@vger.kernel.org>

Allows you to limit the selected power levels via sysfs.

Force the feedback divider to select a power level.

v2: fix checking in rs780_force_fbdiv,
    drop a duplicate divider structure in rs780_dpm_force_performance_level,
    Force the voltage level too.
Signed-off-by: NAnthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Similar to DCE4/5, but supports multiple audio pins
which can be assigned per afmt block.

v2: rework the driver to handle more than one audio
pin.
v3: try different dto reg
v4: properly program dto
v5 (ck): change dto programming order
v6: program speaker allocation block
v7: rebase
v8: rebase on Rafał's changes
v9: integrated Rafał's comments, update to latest
    drm_edid_to_speaker_allocation API
v10: add missing line break in error message
v11: add back audio enabled messages
v12: fix copy paste typo in r600_audio_enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NRafał Miłecki <zajec5@gmail.com>

Our different hardware blocks are actually completely
separated, so it doesn't make much sense any more to
structure the code by pure chipset generations.

Start restructuring the code by separating our the UVD block.

v2: updated commit message
v3: rebased and restructurized start/stop functions for kv dpm.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now that we have callbacks for [rw]ptr handling we can
remove the special handling for the DMA rings and use
the callbacks instead.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The hardware just doesn't support this correctly.
Disable it before we accidentally write anywhere we shouldn't.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Disable the UVD block when not in use to save power.
The block is not actually powergated on CI, but we
switch between UVD DPM (where the uvd clocks are
adjusted on demand) and clocks off.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Powergate the UVD block when not in use to save power.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When we PG (powergate) UVD, we need to re-initialize it
before we can use it again.

v2: rebase on UVD stop fixes
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows you to force the selected performance level via sysfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows you to look at the current DPM state via
debugfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows you to force the selected performance level via sysfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows you to look at the current DPM state via debugfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for btc asics. This includes:
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen switching

Set radeon.dpm=1 to enable.

v2: remove unused radeon_atombios.c changes,
    make missing smc ucode non-fatal
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for KB/KV asics.  This includes:
- dynamic engine clock scaling
- dynamic voltage scaling
- power containment
- shader power scaling

Set radeon.dpm=1 to enable.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This added support for the on-chip thermal sensors on
CIK asics.

v2: fix register offset.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No longer used now that we use the async dma engines or
CP DMA for bo copies.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Removing the clock/power or resetting the VCPU can cause
hangs if that happens in the middle of a register write.

Stall the memory and register bus before putting the VCPU
into reset. Keep it in reset when unloading the module or
suspending.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows you to limit the selected power levels via sysfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows you to look at the current DPM state via
debugfs.

Due to the way the hardware works on these asics, there's
no way to look up exactly what power state we are in, so
we make the best guess we can based on the current sclk.

v2: Anthoine's version
v3: fix ref div
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>