Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 3 年多

通知 13
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 14 6月, 2015 1 次提交
  3. 08 9月, 2014 1 次提交
  5. 09 8月, 2014 1 次提交
  7. 04 4月, 2014 1 次提交
    • J
      mm + fs: store shadow entries in page cache · 91b0abe3
      由 Johannes Weiner 提交于 
      Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page.  As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently.  At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate.  Reclaim will check
for this flag before installing shadow pages.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMinchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      91b0abe3
  9. 13 9月, 2013 1 次提交
  11. 21 12月, 2012 1 次提交
  13. 21 9月, 2012 1 次提交
  15. 06 5月, 2012 1 次提交
  17. 29 3月, 2012 1 次提交
  19. 04 1月, 2012 1 次提交
  21. 02 11月, 2011 1 次提交
  23. 09 4月, 2011 1 次提交
  25. 31 3月, 2011 1 次提交
  27. 10 3月, 2011 1 次提交
  29. 03 3月, 2011 1 次提交
    • A
      ufs: remove the BKL · 788257d6
      由 Arnd Bergmann 提交于 
      This introduces a new per-superblock mutex in UFS to replace
the big kernel lock. I have been careful to avoid nested
calls to lock_ufs and to get the lock order right with
respect to other mutexes, in particular lock_super.

I did not make any attempt to prove that the big kernel
lock is not needed in a particular place in the code,
which is very possible.

The mutex has a significant performance impact, so it is only
used on SMP or PREEMPT configurations.

As Nick Piggin noticed, any allocation inside of the lock
may end up deadlocking when we get to ufs_getfrag_block
in the reclaim task, so we now use GFP_NOFS.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NNick Bowler <nbowler@elliptictech.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Nick Piggin <npiggin@gmail.com>
      788257d6
  31. 10 8月, 2010 4 次提交
    • A
      switch ufs to ->evict_inode() · 58e8268c
      由 Al Viro 提交于 
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      58e8268c
    • C
      get rid of block_write_begin_newtrunc · 155130a4
      由 Christoph Hellwig 提交于 
      Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to block_write_begin.

While we're at it also remove several unused arguments to block_write_begin.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      155130a4
    • C
      introduce __block_write_begin · 6e1db88d
      由 Christoph Hellwig 提交于 
      Split up the block_write_begin implementation - __block_write_begin is a new
trivial wrapper for block_prepare_write that always takes an already
allocated page and can be either called from block_write_begin or filesystem
code that already has a page allocated.  Remove the handling of already
allocated pages from block_write_begin after switching all callers that
do it to __block_write_begin.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      6e1db88d
    • C
      clean up write_begin usage for directories in pagecache · f4e420dc
      由 Christoph Hellwig 提交于 
      For filesystem that implement directories in pagecache we call
block_write_begin with an already allocated page for this code, while the
normal regular file write path uses the default block_write_begin behaviour.

Get rid of the __foofs_write_begin helper and opencode the normal write_begin
call in foofs_write_begin, while adding a new foofs_prepare_chunk helper for
the directory code.  The added benefit is that foofs_prepare_chunk has
a much saner calling convention.

Note that the interruptible flag passed into block_write_begin is always
ignored if we already pass in a page (see next patch for details), and
we never were doing truncations of exessive blocks for this case either so we
can switch directly to block_write_begin_newtrunc.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      f4e420dc
  33. 24 5月, 2010 1 次提交
    • J
      ufs: Remove dead quota code · 8f45c33d
      由 Jan Kara 提交于 
      UFS quota is non-functional at least since 2.6.12 because dq_op was set
to NULL. Since the filesystem exists mainly to allow cooperation with Solaris
and quota format isn't standard, just remove the dead code.

CC: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: NJan Kara <jack@suse.cz>
      8f45c33d
  35. 22 5月, 2010 1 次提交
  37. 06 3月, 2010 1 次提交
  39. 05 3月, 2010 2 次提交
    • C
      dquot: cleanup dquot initialize routine · 871a2931
      由 Christoph Hellwig 提交于 
      Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
      871a2931
    • C
      dquot: move dquot initialization responsibility into the filesystem · 907f4554
      由 Christoph Hellwig 提交于 
      Currently various places in the VFS call vfs_dq_init directly.  This means
we tie the quota code into the VFS.  Get rid of that and make the
filesystem responsible for the initialization.   For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.

For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.

For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.

Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
      907f4554
  41. 19 6月, 2009 1 次提交
  43. 28 3月, 2009 2 次提交
  45. 28 4月, 2008 1 次提交
  47. 09 2月, 2008 1 次提交
  49. 08 2月, 2008 1 次提交
  51. 17 10月, 2007 2 次提交
  53. 18 4月, 2007 1 次提交
  55. 17 3月, 2007 2 次提交
  57. 13 2月, 2007 2 次提交
  59. 31 1月, 2007 1 次提交
  61. 06 1月, 2007 1 次提交
    • E
      [PATCH] fix garbage instead of zeroes in UFS · d63b7090
      由 Evgeniy Dushistov 提交于 
      Looks like this is the problem, which point Al Viro some time ago:

ufs's get_block callback allocates 16k of disk at a time, and links that
entire 16k into the file's metadata.  But because get_block is called for only
a single buffer_head (a 2k buffer_head in this case?) we are only able to tell
the VFS that this 2k is buffer_new().

So when ufs_getfrag_block() is later called to map some more data in the file,
and when that data resides within the remaining 14k of this fragment,
ufs_getfrag_block() will incorrectly return a !buffer_new() buffer_head.

I don't see _right_ way to do nullification of whole block, if use inode
page cache, some pages may be outside of inode limits (inode size), and
will be lost; if use blockdev page cache it is possible to zero real data,
if later inode page cache will be used.

The simpliest way, as can I see usage of block device page cache, but not only
mark dirty, but also sync it during "nullification".  I use my simple tests
collection, which I used for check that create,open,write,read,close works on
ufs, and I see that this patch makes ufs code 18% slower then before.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      d63b7090
  63. 27 9月, 2006 1 次提交