The function checks non-powerplay structures so regressed when
the pp_enabled check was removed.  This should ideally be
implemented similarly for powerplay.

Fixes: 6d07fe7b ("drm/amdgpu: delete pp_enable in adev")
Tested-by: NDieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu not care powerplay or dpm is enabled.
just check ip functions and pp functions
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

put amd_pm_funcs table in struct powerplay for all
asics.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make the interface consistent.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: squash register typo fix from Ray
v3: fix spelling
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

start vce first then enable vce dpm.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This update allows sensors to return more than 1 value and
indicates to the caller how many bytes are written.

The debugfs interface has been updated to handle reading all
of the values.  Simply seek to the enum value (multiplied
by 4) and then read as many bytes as the sensor provides.

(v2):  Don't set size to 4 before reading GPU_POWER
(v3): agd: rebase
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The additional output are:
vddc power in Watt;
vddci power in Watt;
max gpu power in Watt;
average gpu power in Watt.
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As well as fix print format for uint32_t type.
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add the sysfs entries pp_gfx_power_profile and
pp_compute_power_profile which give user a way to set
power profile through parameters minimum sclk, minimum mclk,
activity threshold, up hysteresis and down hysteresis only
when the entry power_dpm_force_performance_level is in
default value "auto". It is read and write. Example:

echo 500 800 20 0 5 > /sys/class/drm/card0/device/pp_*_power_profile

cat /sys/class/drm/card0/device/pp_*_power_profile
500 800 20 0 5

Note: first parameter is sclk in MHz, second is mclk in MHz,
third is activity threshold in percentage, fourth is up hysteresis
in ms and fifth is down hysteresis in ms.

echo set > /sys/class/drm/card0/device/pp_*_power_profile
To set power profile state if it exists.

echo reset > /sys/class/drm/card0/device/pp_*_power_profile
To restore default state and clear previous setting.
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Acked-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Don't update display bandwidth on headless asics.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=99387Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

v2: clean up vce cg function.
    use sw cg when vce stoped.

1. implement vce_stop function.
2. not start vce when hw_init.
3. refine vce cg/pg code.
4. delete bypass mode.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes: 9e8590861e9 ('drm/amdgpu: add parse clock gating state')
Reported-by: NTom StDenis <Tom.StDenis@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

in profiling mode, powerplay will fix power state
as stable as possible.and disable gfx cg and LBPW feature.

profile_standard: as a prerequisite, ensure power and thermal
sustainable, set clocks ratio as close to the highest clock
ratio as possible.
profile_min_sclk: fix mclk as profile_normal, set lowest sclk
profile_min_mclk: fix sclk as profile_normal, set lowest mclk
profile_peak: set highest sclk and mclk, power and thermal not
sustainable
profile_exit: exit profile mode. enable gfx cg/lbpw feature.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Suggested-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: William Lewis <minutemaidpark@hotmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In some case, App need to run under max stable clock.
so export profiling mode: GFX CG was disabled.
and user can select the max stable clock of the device.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only for cards that are supported by powerplay.
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Replace per-asic print_current_performance() functions with generic
that calls read_sensor.  Tested on Tonga and Carrizo for aesthetics
and accuracy.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds a mutex lock for both DPM/PP around the changes in
power gating state so that userspace can poll registers without
a race condition on power state.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It changes the way to skip newline character and also avoids
warning message from some compiler.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements mclk OverDrive(OD) through sysfs.
The new entry pp_mclk_od is read/write. The value of input/output
is an integer of the overclocking percentage.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This extends OD (OverDrive) support to the non-Powerplay code paths.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This extends dpm clock level selection to the non-powerplay code paths.
This interface can be used to select individual clock levels.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a new sysfs entry pp_sclk_od to support sclk overdrive(OD) overclocking,
the entry is read/write, the value of input/output is an integer which is the
over percentage of the highest sclk.

v2: drop extra semicolon
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is no limit on high "idx" can go.  It should be less than
ARRAY_SIZE(data.states) which is 16.

The "data" variable wasn't declared in that scope so I shifted the code
around a bit to make it work.  Also I made "idx" unsigned.

Fixes: f3898ea1 ('drm/amd/powerplay: add some sysfs interfaces for powerplay.')
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows you to force multiple levels rather than just one via the new
sysfs interrface.

v2: squash in:
drm/amd/powerplay: ensure clock level set by user is valid.
From Rex.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

All these are compile time constand and the
drm_debugfs_create/remove_files functions take a const
pointer argument.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On CI, we need to see if the number of crtcs changes to determine
whether or not we need to upload the mclk table again.  In practice
we don't currently upload the mclk table again after the initial load.
The only reason you would would be to add new states, e.g., for
arbitrary mclk setting which is not currently supported.
Acked-by: NJordan Lazare <Jordan.Lazare@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

set_power_state defaults to no displays, so we need to update
the display configuration after setting up the powerstate on the
first call. In most cases this is not an issue since ends up
getting called multiple times at any given modeset and the proper
order is achieved in the display changed handling at the top of
the function.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NJordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org