It's really not right to use 'access_ok()', since that is meant for the
normal "get_user()" and "copy_from/to_user()" accesses, which are done
through the TLB, rather than through the page tables.

Why? access_ok() does both too few, and too many checks.  Too many,
because it is meant for regular kernel accesses that will not honor the
'user' bit in the page tables, and because it honors the USER_DS vs
KERNEL_DS distinction that we shouldn't care about in GUP.  And too few,
because it doesn't do the 'canonical' check on the address on x86-64,
since the TLB will do that for us.

So instead of using a function that isn't meant for this, and does
something else and much more complicated, just do the real rules: we
don't want the range to overflow, and on x86-64, we want it to be a
canonical low address (on 32-bit, all addresses are canonical).
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Improve a few details in perfcounter call-chain recording that
makes use of fast-GUP:

- Use ACCESS_ONCE() to observe the pte value. ptes are fundamentally
  racy and can be changed on another CPU, so we have to be careful
  about how we access them. The PAE branch is already careful with
  read-barriers - but the non-PAE and 64-bit side needs an
  ACCESS_ONCE() to make sure the pte value is observed only once.

- make the checks a bit stricter so that we can feed it any kind of
  cra^H^H^H user-space input ;-)
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Introduce a gup_fast() variant which is usable from IRQ/NMI context.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
CC: Nick Piggin <npiggin@suse.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

While better than get_user_pages(), the usage of gupf(),
especially the return values and the fact that it can
potentially only partially pin the range, warranted some
documentation.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>
Cc: npiggin@suse.de
Cc: akpm@linux-foundation.org
LKML-Reference: <1239320729-3262-1-git-send-email-andy.grover@oracle.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fewer sparse warnings, no functional changes

arch/x86/kernel/vsmp_64.c:87:14: warning: incorrect type in argument 1 (different address spaces)
arch/x86/kernel/vsmp_64.c:87:14:    expected void const volatile [noderef] <asn:2>*addr
arch/x86/kernel/vsmp_64.c:87:14:    got void *[assigned] address
arch/x86/kernel/vsmp_64.c:88:22: warning: incorrect type in argument 1 (different address spaces)
arch/x86/kernel/vsmp_64.c:88:22:    expected void const volatile [noderef] <asn:2>*addr
arch/x86/kernel/vsmp_64.c:88:22:    got void *
arch/x86/kernel/vsmp_64.c:100:23: warning: incorrect type in argument 2 (different address spaces)
arch/x86/kernel/vsmp_64.c:100:23:    expected void volatile [noderef] <asn:2>*addr
arch/x86/kernel/vsmp_64.c:100:23:    got void *
arch/x86/kernel/vsmp_64.c:101:23: warning: incorrect type in argument 1 (different address spaces)
arch/x86/kernel/vsmp_64.c:101:23:    expected void const volatile [noderef] <asn:2>*addr
arch/x86/kernel/vsmp_64.c:101:23:    got void *
arch/x86/mm/gup.c:235:6: warning: incorrect type in argument 1 (different base types)
arch/x86/mm/gup.c:235:6:    expected void const volatile [noderef] <asn:1>*<noident>
arch/x86/mm/gup.c:235:6:    got unsigned long [unsigned] [assigned] start
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since pte_flags() is much cheaper than pte_val() in some virtualized
environments (namely, Xen), use the former whereever possible.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: "Nick Piggin" <npiggin@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Alexey Dobriyan reported trouble with LTP with the new fast-gup code,
and Johannes Weiner debugged it to non-page-aligned addresses, where the
new get_user_pages_fast() code would do all the wrong things, including
just traversing past the end of the requested area due to 'addr' never
matching 'end' exactly.

This is not a pretty fix, and we may actually want to move the alignment
into generic code, leaving just the core code per-arch, but Alexey
verified that the vmsplice01 LTP test doesn't crash with this.
Reported-and-tested-by: NAlexey Dobriyan <adobriyan@gmail.com>
Debugged-by: NJohannes Weiner <hannes@saeurebad.de>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement get_user_pages_fast without locking in the fastpath on x86.

Do an optimistic lockless pagetable walk, without taking mmap_sem or any
page table locks or even mmap_sem.  Page table existence is guaranteed by
turning interrupts off (combined with the fact that we're always looking
up the current mm, means we can do the lockless page table walk within the
constraints of the TLB shootdown design).  Basically we can do this
lockless pagetable walk in a similar manner to the way the CPU's pagetable
walker does not have to take any locks to find present ptes.

This patch (combined with the subsequent ones to convert direct IO to use
it) was found to give about 10% performance improvement on a 2 socket 8
core Intel Xeon system running an OLTP workload on DB2 v9.5

 "To test the effects of the patch, an OLTP workload was run on an IBM
  x3850 M2 server with 2 processors (quad-core Intel Xeon processors at
  2.93 GHz) using IBM DB2 v9.5 running Linux 2.6.24rc7 kernel.  Comparing
  runs with and without the patch resulted in an overall performance
  benefit of ~9.8%.  Correspondingly, oprofiles showed that samples from
  __up_read and __down_read routines that is seen during thread contention
  for system resources was reduced from 2.8% down to .05%.  Monitoring the
  /proc/vmstat output from the patched run showed that the counter for
  fast_gup contained a very high number while the fast_gup_slow value was
  zero."

(fast_gup is the old name for get_user_pages_fast, fast_gup_slow is a
counter we had for the number of times the slowpath was invoked).

The main reason for the improvement is that DB2 has multiple threads each
issuing direct-IO.  Direct-IO uses get_user_pages, and thus the threads
contend the mmap_sem cacheline, and can also contend on page table locks.

I would anticipate larger performance gains on larger systems, however I
think DB2 uses an adaptive mix of threads and processes, so it could be
that thread contention remains pretty constant as machine size increases.
In which case, we stuck with "only" a 10% gain.

The downside of using get_user_pages_fast is that if there is not a pte
with the correct permissions for the access, we end up falling back to
get_user_pages and so the get_user_pages_fast is a bit of extra work.
However this should not be the common case in most performance critical
code.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: Kconfig fix]
[akpm@linux-foundation.org: Makefile fix/cleanup]
[akpm@linux-foundation.org: warning fix]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>