- 14 3月, 2017 2 次提交
-
-
由 Jyri Sarha 提交于
Touching HW while clocks are off is a serious error and for instance breaks suspend functionality. After this patch tilcdc_crtc_update_fb() always updates the primary plane's framebuffer pointer, increases fb's reference count and stores vblank event. tilcdc_crtc_update_fb() only writes the fb's DMA address to HW if the crtc is enabled, as tilcdc_crtc_enable() takes care of writing the address on enable. This patch also refactors the tilcdc_crtc_update_fb() a bit. Number of subsequent small changes had made it almost unreadable. There should be no other functional changes but checking the CRTC's enable state. However, the locking goes a bit differently and some of the redundant checks have been removed in this new version. The enable_lock should be enough to protect the access to tilcdc_crtc->enabled. The irq_lock protects the access to last_vblank and next_fb. The check for vrefresh and last_vblank being valid is redundant, as the vrefresh should be always valid if the CRTC is enabled and now last_vblank should be too, because it is initialized to current time when CRTC raster is enabled. If for some reason the values are not correctly initialized the division by zero warning is quite appropriate. Signed-off-by: NJyri Sarha <jsarha@ti.com> Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Jyri Sarha 提交于
Fix badly hardcoded return return value under fail-label. All goto branches to the label set the "ret"-variable accordingly. Signed-off-by: NJyri Sarha <jsarha@ti.com> Reviewed-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
-
- 03 2月, 2017 1 次提交
-
-
由 Gabriel Krisman Bertazi 提交于
Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // <smpl> @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // </smpl> Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
-
- 27 1月, 2017 1 次提交
-
-
由 Noralf Trønnes 提交于
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so the drm_driver.debugfs_cleanup callback is not needed. Also remove the unused tilcdc_module_ops.debugfs_cleanup() callback. drm_debugfs_cleanup() removes all debugfs files using debugfs_remove_recursive(), so there should be no need for such a callback in the future. Cc: jsarha@ti.com Cc: tomi.valkeinen@ti.com Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> Reviewed-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-16-noralf@tronnes.org
-
- 04 1月, 2017 1 次提交
-
-
由 Bartosz Golaszewski 提交于
Revision 2 of LCDC suffers from an issue where a SYNC_LOST error caused by limited memory bandwidth may leave the picture shifted a couple pixels to the right. This issue has not been observed on revision 1, while the recovery mechanism introduces a different issue, where the END_OF_FRAME interrupt doesn't fire while drm is waiting for vblanks. On rev1: recover from sync lost errors by simply clearing the RASTER_ENABLE bit in the RASTER_CTRL register and re-enabling it again as is suggested by the datasheet. Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NJyri Sarha <jsarha@ti.com>
-
- 30 12月, 2016 1 次提交
-
-
由 Daniel Vetter 提交于
Including all drivers. I thought about keeping small compat functions to avoid having to change all drivers. But I really like the drm_printer idea, so figured spreading it more widely is a good thing. v2: Review from Chris: - Natural argument order and better name for drm_mm_print. - show_mm() macro in the selftest. Cc: Rob Clark <robdclark@gmail.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jyri Sarha <jsarha@ti.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483009764-8281-1-git-send-email-daniel.vetter@ffwll.ch
-
- 26 12月, 2016 1 次提交
-
-
由 Thomas Gleixner 提交于
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
-
- 18 12月, 2016 1 次提交
-
-
由 Laurent Pinchart 提交于
Instead of linking encoders and bridges in every driver (and getting it wrong half of the time, as many drivers forget to set the drm_bridge encoder pointer), do so in core code. The drm_bridge_attach() function needs the encoder and optional previous bridge to perform that task, update all the callers. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Stefan Agner <stefan@agner.ch> # For DCU Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # For atmel-hlcdc Acked-by: Vincent Abriou <vincent.abriou@st.com> # For STI Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # For sun4i Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> # For hisilicon Acked-by: Jyri Sarha <jsarha@ti.com> # For tilcdc Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NArchit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com
-
- 15 12月, 2016 3 次提交
-
-
由 Ville Syrjälä 提交于
Rather than compare the format u32s of two format infos, we can direclty compare the format info pointers themselves. Noramlly all the ->format pointers all point to somwehere in the big array, so this is a valid way to test for equality. Also drivers may want to point ->format at a private format info struct instead (eg. for special compressed formats with extra planes), so just comparing the pixel format values wouldn't necessaritly even work. But comparing the pointers will also take care of that case. @@ struct drm_framebuffer *a; struct drm_framebuffer *b; @@ ( - a->format->format != b->format->format + a->format != b->format | - a->format->format == b->format->format + a->format == b->format ) @@ struct drm_plane_state *a; struct drm_plane_state *b; @@ ( - a->fb->format->format != b->fb->format->format + a->fb->format != b->fb->format | - a->fb->format->format == b->fb->format->format + a->fb->format == b->fb->format ) @@ struct drm_crtc *crtc; struct drm_framebuffer *x; @@ ( - crtc->primary->fb->format->format != x->format->format + crtc->primary->fb->format != x->format | - x->format->format != crtc->primary->fb->format->format + x->format != crtc->primary->fb->format ) @@ struct drm_mode_set *set; @@ - set->fb->format->format != set->crtc->primary->fb->format->format + set->fb->format != set->crtc->primary->fb->format Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-35-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Ville Syrjälä 提交于
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com -
由 Ville Syrjälä 提交于
Replace drm_format_plane_cpp(fb->pixel_format) with just fb->format->cpp[]. Avoids the expensive format info lookup. @@ struct drm_framebuffer *a; struct drm_framebuffer b; expression E; @@ ( - drm_format_plane_cpp(a->pixel_format, E) + a->format->cpp[E] | - drm_format_plane_cpp(b.pixel_format, E) + b.format->cpp[E] ) @@ struct drm_plane_state *a; struct drm_plane_state b; expression E; @@ ( - drm_format_plane_cpp(a->fb->pixel_format, E) + a->fb->format->cpp[E] | - drm_format_plane_cpp(b.fb->pixel_format, E) + b.fb->format->cpp[E] ) @@ struct drm_framebuffer *a; identifier T; expression E; @@ T = a->pixel_format <+... - drm_format_plane_cpp(T, E) + a->format->cpp[E] ...+> @@ struct drm_framebuffer b; identifier T; expression E; @@ T = b.pixel_format <+... - drm_format_plane_cpp(T, E) + b.format->cpp[E] ...+> v2: Rerun spatch due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751057-18123-1-git-send-email-ville.syrjala@linux.intel.com
-
- 01 12月, 2016 1 次提交
-
-
由 Laurent Pinchart 提交于
Many drivers (21 to be exact) create connectors that are always connected (for instance to an LVDS or DSI panel). Instead of forcing them to implement a dummy .detect() handler, make the callback optional and consider the connector as always connected in that case. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Acked-by: NJyri Sarha <jsarha@ti.com> Acked-by: NJani Nikula <jani.nikula@intel.com> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Acked-by: NVincent Abriou <vincent.abriou@st.com> Acked-by: NAlexey Brodkin <abrodkin@synopsys.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c] Signed-off-by: NSean Paul <seanpaul@chromium.org>
-
- 30 11月, 2016 21 次提交
-
-
由 Bartosz Golaszewski 提交于
The DT binding for tildc is not consistent with the driver code: there are two options - 'max-width' and 'max-pixelclock' specified in the documentation which are parsed as 'ti,max-width' and 'ti,max-pixelclock' respectively. Make the driver code consistent with the binding. Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NJyri Sarha <jsarha@ti.com>
-
由 Jyri Sarha 提交于
We should wait for the last frame to complete before shutting things down also on LCDC rev 1. Signed-off-by: NJyri Sarha <jsarha@ti.com> Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Jyri Sarha 提交于
Configure video mode to HW in enable() call back. There is no reason to do it before that. This makes PM functions way easier because there is no HW context to save when screen is for instance blanked. This patch removes mode_set_nofb() call back from tilcdc. Signed-off-by: NJyri Sarha <jsarha@ti.com> Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Jyri Sarha 提交于
Load palette at the end of mode_set_nofb(). Moving the palette loading to mode_set_nofb() saves us from storing and restoring of framebuffer addresses in dma registers that were just recently written there. Signed-off-by: NJyri Sarha <jsarha@ti.com> Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Jyri Sarha 提交于
Add timeout wait for palette loadind to complete. We do not want to hang forever if palette loaded interrupt does not arrive for some reason. Signed-off-by: NJyri Sarha <jsarha@ti.com> Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Jyri Sarha 提交于
The LCDC revision 2 documentation also mentions the mandatory palette for true color modes. Even if the rev 2 LCDC appears to work just fine without the palette being loaded loading it helps in testing the feature. Signed-off-by: NJyri Sarha <jsarha@ti.com> Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Jyri Sarha 提交于
Set LCDC_PALETTE_LOAD_MODE bit-field with new tilcdc_write_mask() instead of tilcdc_set(). Setting a bit-fields with tilcdc_set() is fundamentally broken. Signed-off-by: NJyri Sarha <jsarha@ti.com> Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Jyri Sarha 提交于
Add tilcdc_write_mask() for handling register field wider than one bit and mask values for those fields. Signed-off-by: NJyri Sarha <jsarha@ti.com> Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Jyri Sarha 提交于
Failed tilcdc_crtc_create() error handling was broken, this patch should fix it. Signed-off-by: NJyri Sarha <jsarha@ti.com> Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Bartosz Golaszewski 提交于
Revision 1 of the IP doesn't work if we don't load the palette (even if it's not used, which is the case for the RGB565 format). Add a function called from tilcdc_crtc_enable() which performs all required actions if we're dealing with a rev1 chip. Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: NJyri Sarha <jsarha@ti.com> Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Jyri Sarha 提交于
Revision 1 LCDC support also sync lost errors and can benefit from sync lost recovery routine. Signed-off-by: NJyri Sarha <jsarha@ti.com> Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Jyri Sarha 提交于
Adds drm bride support for attaching drm bridge drivers to tilcdc. The decision whether a video port leads to an external encoder or bridge is made simply based on remote device's compatible string. The code has been tested with BeagleBone-Black with and without BeagleBone DVI-D Cape Rev A3 using ti-tfp410 driver. Signed-off-by: NJyri Sarha <jsarha@ti.com> Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Jyri Sarha 提交于
Recover from sync lost error flood by resetting the LCDC instead of turning off the SYNC_LOST error IRQ. When LCDC starves on limited memory bandwidth it may sometimes result an error situation when the picture may have shifted couple of pixels to right and SYNC_LOST interrupt is generated on every frame. LCDC main reset recovers from this situation and causes a brief blanking on the screen. Signed-off-by: NJyri Sarha <jsarha@ti.com> Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
-
由 Jyri Sarha 提交于
Fix race from forced shutdown of crtc in unload by adding internal locking and a boolean telling if device is going to be shutdown. Signed-off-by: NJyri Sarha <jsarha@ti.com> -
由 Jyri Sarha 提交于
Use unload to handle initialization failures instead of complex goto label mess. To do this the initialization sequence needed slight reordering and some unload functions needed to become conditional. Signed-off-by: NJyri Sarha <jsarha@ti.com> -
由 Jyri Sarha 提交于
Stop using struct drm_driver load() and unload() callbacks. The callbacks should not be used anymore. Instead of using load the drm_device is allocated with drm_dev_alloc() and registered with drm_dev_register() only after the driver is completely initialized. The deinitialization is done directly either in component unbind callback or in platform driver demove callback. Signed-off-by: NJyri Sarha <jsarha@ti.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Jyri Sarha 提交于
Remove obsolete drm_connector_register() calls from tilcdc_panel.c and tilcdc_tfp410.c. All connectors are registered when drm_dev_register() is called. Signed-off-by: NJyri Sarha <jsarha@ti.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Daniel Schultz 提交于
This error message will be printed when a FIFO underflow irq has triggered. Since this happens sometimes and the error message will be displayed on the console, it should have a correct spelling. Signed-off-by: NDaniel Schultz <d.schultz@phytec.de> Signed-off-by: NJyri Sarha <jsarha@ti.com>
-
由 Daniel Schultz 提交于
The commit d8ff0c63fbcb ("drm/tilcdc: Adjust the FB_CEILING address") added an adjustment of the FB_CEILING address. This is done by decrementing the address by one. On the AM335x (rev 0x4F201000) the framebuffer is rotated left over the display border, because the ceiling address is 8f276fff instead of 8f277000. Since this adjustment isn't necessary for the LCDC v2, the origin ceiling address should be used. Signed-off-by: NDaniel Schultz <d.schultz@phytec.de> Signed-off-by: NJyri Sarha <jsarha@ti.com> -
由 Bartosz Golaszewski 提交于
Due to some potential tweaks for the da850 LCDC (for example: the required memory bandwith settings) we need a separate compatible for the IP present on the da850 boards. Suggested-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NJyri Sarha <jsarha@ti.com>
-
由 Bartosz Golaszewski 提交于
Some architectures don't use the common clock framework and don't implement all the clk interfaces for every clock. This is the case for da850-lcdk where clk_set_rate() only works for PLL0 and PLL1. Trying to set the clock rate for the LCDC clock results in -EINVAL being returned. As a workaround for that: if the call to clk_set_rate() fails, fall back to adjusting the clock divider instead. Proper divider value is calculated by dividing the current clock rate by the required pixel clock rate in HZ. This code is based on a hack initially developed internally for baylibre by Karl Beldan <kbeldan@baylibre.com>. Tested with a da850-lcdk with an LCD display connected over VGA. Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: NJyri Sarha <jsarha@ti.com>
-
- 02 11月, 2016 1 次提交
-
-
由 Jani Nikula 提交于
If we define drm_compat_ioctl NULL on CONFIG_COMPAT=n, we don't have to check for the config everywhere. Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NSean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1478014844-27454-1-git-send-email-jani.nikula@intel.com
-
- 25 10月, 2016 1 次提交
-
-
由 Russell King 提交于
Convert DT component matching to use component_match_add_release(). Acked-by: NJyri Sarha <jsarha@ti.com> Reviewed-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NSean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/E1bwo6l-0005Io-Q1@rmk-PC.armlinux.org.uk
-
- 18 10月, 2016 1 次提交
-
-
由 Laurent Pinchart 提交于
The driver needs the number of bytes per pixel, not the bpp and depth info meant for fbdev compatibility. Use the right API. In the tilcdc_crtc_mode_set() function compute the hardware register value directly from the pixel format instead of computing the number of bits per pixels first. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: NArchit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-7-git-send-email-laurent.pinchart@ideasonboard.com
-
- 17 10月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
drm_atomic_state has a complicated single owner model that tracks the single reference from allocation through to destruction on another thread - or perhaps on a local error path. We can simplify this tracking by using reference counting (at a cost of a few more atomics). This is even more beneficial when the lifetime of the state becomes more convoluted than being passed to a single worker thread for the commit. v2: Double check !intel atomic_commit functions for missing gets v3: Update kerneldocs Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: NEric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161014121833.439-27-chris@chris-wilson.co.uk
-
- 23 9月, 2016 3 次提交
-
-
由 Daniel Schultz 提交于
When 'component_bind_all' fails it should not try to unbind components in the error handling. This will produce a null pointer kernel panic when no component exist. This patch changes the order of the error handling. Now, it will only unbind components if the are bound. Otherwise, the module will jump to an error label below. Signed-off-by: NDaniel Schultz <d.schultz@phytec.de> Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NJyri Sarha <jsarha@ti.com>
-
由 Markus Elfring 提交于
Return directly after a memory allocation failed in this function at the beginning. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NJyri Sarha <jsarha@ti.com>
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: drivers/gpu/drm/tilcdc/tilcdc_drv.c:64:5: warning: symbol 'tilcdc_atomic_check' was not declared. Should it be static? Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NJyri Sarha <jsarha@ti.com>
-