While reviewing commit 1c40be12, I
 audited other users of tc_action_ops->dump for information leaks.

 That commit covered almost all of them but act_police still had a leak.

 opt.limit and opt.capab aren't zeroed out before the structure is
 passed out.

 This patch uses the C99 initializers to zero everything unused out.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Acked-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise lockdep complains...

https://bugzilla.kernel.org/show_bug.cgi?id=17311

[ INFO: possible circular locking dependency detected ]
2.6.36-rc2-git4 #12
-------------------------------------------------------
kworker/0:3/3630 is trying to acquire lock:
 (rtnl_mutex){+.+.+.}, at: [<ffffffff813396c7>] rtnl_lock+0x12/0x14

but task is already holding lock:
 (rfkill_global_mutex){+.+.+.}, at: [<ffffffffa014b129>]
rfkill_switch_all+0x24/0x49 [rfkill]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (rfkill_global_mutex){+.+.+.}:
       [<ffffffff81079ad7>] lock_acquire+0x120/0x15b
       [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e
       [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39
       [<ffffffffa014b4ab>] rfkill_register+0x2b/0x29c [rfkill]
       [<ffffffffa0185ba0>] wiphy_register+0x1ae/0x270 [cfg80211]
       [<ffffffffa0206f01>] ieee80211_register_hw+0x1b4/0x3cf [mac80211]
       [<ffffffffa0292e98>] iwl_ucode_callback+0x9e9/0xae3 [iwlagn]
       [<ffffffff812d3e9d>] request_firmware_work_func+0x54/0x6f
       [<ffffffff81065d15>] kthread+0x8c/0x94
       [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10

-> #1 (cfg80211_mutex){+.+.+.}:
       [<ffffffff81079ad7>] lock_acquire+0x120/0x15b
       [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e
       [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39
       [<ffffffffa018605e>] cfg80211_get_dev_from_ifindex+0x1b/0x7c [cfg80211]
       [<ffffffffa0189f36>] cfg80211_wext_giwscan+0x58/0x990 [cfg80211]
       [<ffffffff8139a3ce>] ioctl_standard_iw_point+0x1a8/0x272
       [<ffffffff8139a529>] ioctl_standard_call+0x91/0xa7
       [<ffffffff8139a687>] T.723+0xbd/0x12c
       [<ffffffff8139a727>] wext_handle_ioctl+0x31/0x6d
       [<ffffffff8133014e>] dev_ioctl+0x63d/0x67a
       [<ffffffff8131afd9>] sock_ioctl+0x48/0x21d
       [<ffffffff81102abd>] do_vfs_ioctl+0x4ba/0x509
       [<ffffffff81102b5d>] sys_ioctl+0x51/0x74
       [<ffffffff81009e02>] system_call_fastpath+0x16/0x1b

-> #0 (rtnl_mutex){+.+.+.}:
       [<ffffffff810796b0>] __lock_acquire+0xa93/0xd9a
       [<ffffffff81079ad7>] lock_acquire+0x120/0x15b
       [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e
       [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39
       [<ffffffff813396c7>] rtnl_lock+0x12/0x14
       [<ffffffffa0185cb5>] cfg80211_rfkill_set_block+0x1a/0x7b [cfg80211]
       [<ffffffffa014aed0>] rfkill_set_block+0x80/0xd5 [rfkill]
       [<ffffffffa014b07e>] __rfkill_switch_all+0x3f/0x6f [rfkill]
       [<ffffffffa014b13d>] rfkill_switch_all+0x38/0x49 [rfkill]
       [<ffffffffa014b821>] rfkill_op_handler+0x105/0x136 [rfkill]
       [<ffffffff81060708>] process_one_work+0x248/0x403
       [<ffffffff81062620>] worker_thread+0x139/0x214
       [<ffffffff81065d15>] kthread+0x8c/0x94
       [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>

Once we started enforcing the a nl_table[] entry exist for
a protocol, NETLINK_USERSOCK stopped working.  Add a dummy
table entry so that it works again.
Reported-by: NThomas Voegtle <tv@lio96.de>
Tested-by: NThomas Voegtle <tv@lio96.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If irda_open_tsap() fails, the irda_bind() code tries to destroy
the ->ias_obj object by hand, but does so wrongly.

In particular, it fails to a) release the hashbin attached to the
object and b) reset the self->ias_obj pointer to NULL.

Fix both problems by using irias_delete_object() and explicitly
setting self->ias_obj to NULL, just as irda_release() does.
Reported-by: NTavis Ormandy <taviso@cmpxchg8b.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Wireless extensions have an unfortunate, undocumented
requirement which requires drivers to always fill
iwp->length when returning a successful status. When
a driver doesn't do this, it leads to a kernel heap
content leak when userspace offers a larger buffer
than would have been necessary.

Arguably, this is a driver bug, as it should, if it
returns 0, fill iwp->length, even if it separately
indicated that the buffer contents was not valid.

However, we can also at least avoid the memory content
leak if the driver doesn't do this by setting the iwp
length to max_tokens, which then reflects how big the
buffer is that the driver may fill, regardless of how
big the userspace buffer is.

To illustrate the point, this patch also fixes a
corresponding cfg80211 bug (since this requirement
isn't documented nor was ever pointed out by anyone
during code review, I don't trust all drivers nor
all cfg80211 handlers to implement it correctly).

Cc: stable@kernel.org [all the way back]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The new workqueue changes helped me find this bug
that's been lingering since the changes to the work
processing in mac80211 -- the work timer is never
deleted properly. Do that to avoid having it fire
after all data structures have been freed. It can't
be re-armed because all it will do, if running, is
schedule the work, but that gets flushed later and
won't have anything to do since all work items are
gone by now (by way of interface removal).

Cc: stable@kernel.org [2.6.34+]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The string clone is only used as a temporary copy of the argument val
within the while loop, and so it should be freed before leaving the
function.  The call to strsep, however, modifies clone, so a pointer to the
front of the string is kept in saved_clone, to make it possible to free it.

The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E;
identifier l;
statement S;
@@

*x= \(kasprintf\|kstrdup\)(...);
...
if (x == NULL) S
... when != kfree(x)
    when != E = x
if (...) {
  <... when != kfree(x)
* goto l;
  ...>
* return ...;
}
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

caif does not build on ia64 starting with 2.6.32-rc1.  Using
asm/unaligned.h instead of linux/unaligned/le_byteshift.h fixes the issue.

include/linux/unaligned/le_byteshift.h:40:50: error: redefinition of 'get_unaligned_le16'
include/linux/unaligned/le_byteshift.h:45:50: error: redefinition of 'get_unaligned_le32'
include/linux/unaligned/le_byteshift.h:50:50: error: redefinition of 'get_unaligned_le64'
include/linux/unaligned/le_byteshift.h:55:51: error: redefinition of 'put_unaligned_le16'
include/linux/unaligned/le_byteshift.h:60:51: error: redefinition of 'put_unaligned_le32'
include/linux/unaligned/le_byteshift.h:65:51: error: redefinition of 'put_unaligned_le64'
include/linux/unaligned/le_struct.h:31:51: note: previous definition of 'put_unaligned_le64' was here
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves a missplaced sock_put(sk) after
bh_unlock_sock(sk)
like in other parts of AX25 driver.
Signed-off-by: NBernard Pidoux <f6bvp@free.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

close https://bugzilla.kernel.org/show_bug.cgi?id=16529

Before calling dev_forward_skb(), we should make sure skb head contains
at least an ethernet header, even if length included in upper layer said
so. Use pskb_may_pull() to make sure this ethernet header is present in
skb head.
Reported-by: NThomas Heil <heil@terminal-consulting.de>
Reported-by: NIan Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This issue come from ruby language community. Below test program
hang up when only run on Linux.

	% uname -mrsv
	Linux 2.6.26-2-486 #1 Sat Dec 26 08:37:39 UTC 2009 i686
	% ruby -rsocket -ve '
	BasicSocket.do_not_reverse_lookup = true
	serv = TCPServer.open("127.0.0.1", 0)
	s1 = TCPSocket.open("127.0.0.1", serv.addr[1])
	s2 = serv.accept
	s2.close
	s1.write("a") rescue p $!
	s1.write("a") rescue p $!
	Thread.new {
	  s1.write("a")
	}.join'
	ruby 1.9.3dev (2010-07-06 trunk 28554) [i686-linux]
	#<Errno::EPIPE: Broken pipe>
	[Hang Here]

FreeBSD, Solaris, Mac doesn't. because Ruby's write() method call
select() internally. and tcp_poll has a bug.

SUS defined 'ready for writing' of select() as following.

|  A descriptor shall be considered ready for writing when a call to an output
|  function with O_NONBLOCK clear would not block, whether or not the function
|  would transfer data successfully.

That said, EPIPE situation is clearly one of 'ready for writing'.

We don't have read-side issue because tcp_poll() already has read side
shutdown care.

|        if (sk->sk_shutdown & RCV_SHUTDOWN)
|                mask |= POLLIN | POLLRDNORM | POLLRDHUP;

So, Let's insert same logic in write side.

- reference url
  http://blade.nagaokaut.ac.jp/cgi-bin/scat.rb/ruby/ruby-core/31065
  http://blade.nagaokaut.ac.jp/cgi-bin/scat.rb/ruby/ruby-core/31068Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As discovered by Anton Blanchard, current code to autotune 
tcp_death_row.sysctl_max_tw_buckets, sysctl_tcp_max_orphans and
sysctl_max_syn_backlog makes little sense.

The bigger a page is, the less tcp_max_orphans is : 4096 on a 512GB
machine in Anton's case.

(tcp_hashinfo.bhash_size * sizeof(struct inet_bind_hashbucket))
is much bigger if spinlock debugging is on. Its wrong to select bigger
limits in this case (where kernel structures are also bigger)

bhash_size max is 65536, and we get this value even for small machines. 

A better ground is to use size of ehash table, this also makes code
shorter and more obvious.

Based on a patch from Anton, and another from David.
Reported-and-tested-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As reported by Anton Blanchard when we use
percpu_counter_read_positive() to make our orphan socket limit checks,
the check can be off by up to num_cpus_online() * batch (which is 32
by default) which on a 128 cpu machine can be as large as the default
orphan limit itself.

Fix this by doing the full expensive sum check if the optimized check
triggers.
Reported-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>

nf_bridge_alloc() always reset the skb->nf_bridge, so we should always
put the old one.
Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Signed-off-by: NBart De Schuymer <bdschuym@pandora.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit f3c5c1bf
(netfilter: xtables: make ip_tables reentrant) forgot to
also compute the jumpstack size in the compat handlers.

Result is that "iptables -I INPUT -j userchain" turns into -j DROP.

Reported by Sebastian Roesner on #netfilter, closes
http://bugzilla.netfilter.org/show_bug.cgi?id=669.

Note: arptables change is compile-tested only.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Tested-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After skb is queued, its illegal to dereference it.

Cache skb->len into a temporary variable.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When adding a new vlan, if the underlying interface has no carrier,
then the newly added vlan interface should also have no carrier.
At present, this is not true - the newly added vlan is added with
carrier up.  Fix by checking state of real device.
Signed-off-by: NPhil Oester <kernel@linuxace.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct rds_rdma_notify contains a 32 bits hole on 64bit arches,
make sure it is zeroed before copying it to user.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Andy Grover <andy.grover@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since
commit 1dacc76d
Author: Johannes Berg <johannes@sipsolutions.net>
Date:   Wed Jul 1 11:26:02 2009 +0000

    net/compat/wext: send different messages to compat tasks

we had a race condition when setting and then
restoring frag_list. Eric attempted to fix it,
but the fix created even worse problems.

However, the original motivation I had when I
added the code that turned out to be racy is
no longer clear to me, since we only copy up
to skb->len to userspace, which doesn't include
the frag_list length. As a result, not doing
any frag_list clearing and restoring avoids
the race condition, while not introducing any
other problems.

Additionally, while preparing this patch I found
that since none of the remaining netlink code is
really aware of the frag_list, we need to use the
original skb's information for packet information
and credentials. This fixes, for example, the
group information received by compat tasks.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@kernel.org [2.6.31+, for 2.6.35 revert 1235f504]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

>Xin Xiaohui wrote:
> I looked into the code dev_gro_receive(), found the code here:
> if the frags[0] is pulled to 0, then the page will be released,
> and memmove() frags left.
> Is that right? I'm not sure if memmove do right or not, but
> frags[0].size is never set after memove at least. what I think
> a simple way is not to do anything if we found frags[0].size == 0.
> The patch is as followed.
...

This version of the patch fixes the bug directly in memmove.
Reported-by: N"Xin, Xiaohui" <xiaohui.xin@intel.com>
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We leak at least 32bits of kernel memory to user land in tc dump,
because we dont init all fields (capab ?) of the dumped structure.

Use C99 initializers so that holes and non explicit fields are zeroed.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 24b36f01 (netfilter: {ip,ip6,arp}_tables: dont block
bottom half more than necessary), lockdep can raise a warning
because we attempt to lock a spinlock with BH enabled, while
the same lock is usually locked by another cpu in a softirq context.

Disable again BH to avoid these lockdep warnings.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Diagnosed-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 1235f504.

It causes regressions worse than the problem it was trying
to fix.  Eric will try to solve the problem another way.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sysctl output ipv6 gc_elasticity and min_adv_mss as values divided by
HZ. However, they are not in unit of jiffies, since ip6_rt_min_advmss
refers to packet size and ip6_rt_fc_elasticity is used as scaler as in
expire>>ip6_rt_gc_elasticity, so replace the jiffies conversion
handler will regular handler for them.

This has impact on scripts that are currently working assuming the
divide by HZ, will yield different results with this patch in place.
Signed-off-by: NMin Zhang <mzhang@mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As xfrm_compile_policy runs within a read_lock, we cannot use
GFP_KERNEL for memory allocations.
Reported-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several gigabit network drivers (SB1250_MAC, TIGON3, FSL, GIANFAR,
UCC_GETH, MV643XX_ETH, XILINX_LL_TEMAC, S6GMAC, STMMAC_ETH, PASEMI_MAC,
and OCTEON_ETHERNET) select PHYLIB.  These drivers are not under
NET_ETHERNET (10/100 mbit), so this warning is generated (long, irrelevant
parts are omitted):

warning: (NET_DSA && NET && EXPERIMENTAL && NET_ETHERNET && !S390 || ... || SB1250_MAC && NETDEVICES && NETDEV_1000 && SIBYTE_SB1xxx_SOC || TIGON3 && NETDEVICES && NETDEV_1000 && PCI || FSL_PQ_MDIO && NETDEVICES && NETDEV_1000 && FSL_SOC || GIANFAR && NETDEVICES && NETDEV_1000 && FSL_SOC || UCC_GETH && NETDEVICES && NETDEV_1000 && QUICC_ENGINE || MV643XX_ETH && NETDEVICES && NETDEV_1000 && (MV64X60 || PPC32 || PLAT_ORION) || XILINX_LL_TEMAC && NETDEVICES && NETDEV_1000 && (PPC || MICROBLAZE) || S6GMAC && NETDEVICES && NETDEV_1000 && XTENSA_VARIANT_S6000 || STMMAC_ETH && NETDEV_1000 && NETDEVICES && CPU_SUBTYPE_ST40 || PASEMI_MAC && NETDEVICES && NETDEV_10000 && PPC_PASEMI && PCI || OCTEON_ETHERNET && STAGING && !STAGING_EXCLUDE_BUILD && CPU_CAVIUM_OCTEON) selects PHYLIB which has unmet direct dependencies (!S390 && NET_ETHERNET)

PHYLIB is used by non-10/100 mbit ethernet drivers, so change the dependencies
to be NETDEVICES instead of NET_ETHERNET.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a limit for nframes as the number of frames in TX_SETUP and
RX_SETUP are derived from a single byte multiplex value by default.
Use-cases that would require to send/filter more than 256 CAN frames should
be implemented in userspace for complexity reasons anyway.

Additionally the assignments of unsigned values from userspace to signed
values in kernelspace and vice versa are fixed by using unsigned values in
kernelspace consistently.
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Reported-by: NBen Hawkes <hawkes@google.com>
Acked-by: NUrs Thuermann <urs.thuermann@volkswagen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Require qdisc class ops .walk and .leaf for classful qdisc in
register_qdisc(). The checks could be done later insted, but these
ops are really needed and used by most of classful qdiscs.
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sch_sfq as a classful qdisc needs the .leaf handler. Otherwise, there
is an oops possible in tc_modify_qdisc()/check_loop().

Fixes commit 7d2681a6Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Headroom size for control channel must be at least 48 bytes in some scenarios.
Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

remote_tx_win is intended to be set on receipt of an L2CAP
configuration request.  The value is used to determine the size of the
transmit window on the remote side of an ERTM connection, so L2CAP
can stop sending frames when that remote window is full.

An incorrect remote_tx_win value will cause the stack to not fully
utilize the tx window (performance impact), or to overfill the remote
tx window (causing dropped frames or a disconnect).

This patch removes an extra setting of remote_tx_win when a
configuration response is received.  The transmit window has a
different meaning in a response - it is an informational value
less than or equal to the local tx_win.
Signed-off-by: NMat Martineau <mathewm@codeaurora.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Incoming configuration values must be converted to native CPU order
before use.  This fixes a bug where a little-endian MPS value is
compared to a native CPU value.  On big-endian processors, this
can cause ERTM and streaming mode segmentation to produce PDUs
that are larger than the remote stack is expecting, or that would
produce fragmented skbs that the current FCS code cannot handle.
Signed-off-by: NMat Martineau <mathewm@codeaurora.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This is based on work originally done by Patric McHardy.
Signed-off-by: NBen Greear <greearb@candelatech.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pkt_sched: Add some basic qdisc class ops verification. Was: [PATCH] sfq: add dummy bind/unbind handles

Verify in register_qdisc() some basic qdisc class handlers are present.
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pkt_sched: sch_sfq: Add dummy unbind_tcf and put handles. Was: [PATCH] sfq: add dummy bind/unbind handles

Add dummy .unbind_tcf and .put qdisc class ops for easier verification.
(All other schedulers have it like this.)
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Accesses to "wdev->current_bss" must be
locked with the wdev lock, which action
frame transmission is missing.

Cc: stable@kernel.org [2.6.33+]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Since there was added ->tcf_chain() method without ->bind_tcf() to
sch_sfq class options, there is oops when a filter is added with
the classid parameter.

Fixes commit 7d2681a6
netdev thread: null pointer at cls_api.c
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Reported-by: NFranchoze Eric <franchoze@yandex.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Although netif_rx() isn't expected to be called in process context with
preemption enabled, it'd better handle this case. And this is why get_cpu()
is used in the non-RPS #ifdef branch. If tree RCU is selected,
rcu_read_lock() won't disable preemption, so preempt_disable() should be
called explictly.
Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_parse_md5sig_option doesn't check md5sig option (TCPOPT_MD5SIG)
length, but tcp_v[46]_inbound_md5_hash assume that it's at least 16
bytes long.
Signed-off-by: NDmitry Popov <dp@highloadlab.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The netpoll_rx_on() check in __napi_gro_receive() skips part of the
"common" GRO_NORMAL path, especially "pull:" in dev_gro_receive(),
where at least eth header should be copied for entirely paged skbs.
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>