- 21 10月, 2005 1 次提交
-
-
由 Dave Jones 提交于
Signed-off-by: NDave Jones <davej@redhat.com>
-
- 24 9月, 2005 1 次提交
-
-
由 Dave Jones 提交于
Go back to what 2.4 kernels used to do here, as if this hits, the kernel just hangs indefinitly. Actually an improvement over 2.4 - we now break; out of the loop instead of just printing messages on timeouts. Signed-off-by: NDave Jones <davej@redhat.com>
-
- 15 9月, 2005 1 次提交
-
-
由 John W. Linville 提交于
Certain (SGI?) ia64 boxes object to having their PCI BARs restored unless absolutely necessary. This patch restricts calling pci_restore_bars from pci_set_power_state unless the current state is PCI_UNKNOWN, the actual (i.e. physical) state of the device is PCI_D3hot, and the device indicates that it will lose its configuration when transitioning to PCI_D0. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 9月, 2005 11 次提交
-
-
由 Frank Pavlic 提交于
Jeff, sorry if I have flooded your inbox, I had some problems with the mail server here yesterday, but it seems to be fixed ... Ok patch 3-4 have no dependencies on patch 2 since only qeth driver is affected.Thus I have made a new patch 2 for ctc driver. Thank you . [patch 2/4] s390: ctc driver fixes From: Peter Tiedemann <ptiedem@de.ibm.com> - race condition fixed - minor cleanup Signed-off-by: NPeter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com> diffstat: ctcmain.c | 41 ++++++++++++++++++++++------------------- 1 files changed, 22 insertions(+), 19 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Merge of four previous patches and the Kconfig fix * Remove debug printk's * whitespace cleanup and version number change * clear interrupts, reset phy, and reset hardware on shutdown * ignore 64bit counter overflow interrupts * fix a couple of places where second port could clobber state of first port. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Do not count frames dropped by the hardware as part of rx_dropped. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Do not count non-error frames dropped by the hardware as part of rx_dropped. Instead, count those frames dropped as rx_missed_errors. Also, do not count other error frames as part of rx_dropped. Finally, do not count oversized frames in rx_dropped (since they are counted as part of rx_length_errors). Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 John W. Linville 提交于
Do not count frames dropped by the hardware as part of rx_dropped. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 matthieu castet 提交于
this patch display the correct channel number with iwlist scan Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Uwe Koziolek 提交于
There is an uninitialized variable issue in sata_sis.c Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Arnaud Patard 提交于
This patch fixes a nasty typo I introduced in my previous patch (commit f2c853bc). The right offset of the second port in pure sata mode is 64 and not 0x64. Thanks to Martin Schuster for pointing this to me Signed-off-by: NArnaud Patard <apatard@mandriva.com> --- Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Keith Owens 提交于
xircom_cb.c does #if CONFIG_NET_POLL_CONTROLLER instead of #ifdef, resulting in drivers/net/tulip/xircom_cb.c:120:5: warning: "CONFIG_NET_POLL_CONTROLLER" is not defined. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Andrew Morton 提交于
drivers/net/s2io.c: In function `init_shared_mem': drivers/net/s2io.c:431: warning: cast from pointer to integer of different size drivers/net/s2io.c: In function `free_shared_mem': drivers/net/s2io.c:662: warning: cast from pointer to integer of different size Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Fix PCI device id issues with sk98lin driver. 1. DLINK 530-T card has no Vital Product Data (VPD) area so the sk98lin driver won't work. (skge does however) 2. Remove commented out Yukon2 stuff 3. Restrict Linksys card to revisions that don't conflict with r8169 version. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 13 9月, 2005 26 次提交
-
-
由 Tobias Klauser 提交于
Replace the custom CHAR_IS_NUM() macro with isdigit() from <linux/ctype.h> Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch> Acked-by: N"Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Some adjustments to the matroxfb code, for one part preventing the display to be disabled for longer than necessary, and for the other part to make information about the frame buffer position available so that a kernel debugger might obtain that before the initial mode change. Finally, some return code corrections to fit the generic fb code. Signed-off-by: NJan Beulich <jbeulich@novell.com> Acked-by: NPetr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
const-ify the font control structures and data, to make somewhat better guarantees that these are not modified anywhere in the kernel. Specifically for a kernel debugger to share this information from the normal kernel code, such a guarantee seems rather desirable. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: "Antonino A. Daplas" <adaplas@hotpop.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
An adjustment to the SM_DOWN case of fbcon_scroll to match the behavior of SM_UP. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: "Antonino A. Daplas" <adaplas@hotpop.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
- Bug fix for DViCO FusionHDTV5 Gold to avoid noise after frontend init. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
Add a input driver for the keyboard found on the Zaurus Cxx00 series (Spitz, Akita, Borzoi). Its based on corgikbd but there are enough subtle differences to justify a separate driver. Signed-Off-by: NRichard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
Separate out the Sharp Zaurus c7x0 series specific code from the Corgi backlight driver. Abstract model/machine specific functions to corgi_lcd.c via sharpsl.h This enables the driver to be used by the Zaurus cxx00 series. Signed-Off-by: NRichard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
Separate out the Sharp Zaurus c7x0 series specific code from the Corgi Touchscreen driver. Use the new functions in corgi_lcd.c via sharpsl.h for hsync handling and pass the IRQ as a platform device resource. Move a function prototype into the w100fb header file where it belongs. This enables the driver to be used by the Zaurus cxx00 series. Signed-Off-by: NRichard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Osterlund 提交于
Remove some redundant BUG_ON() statements in pktcdvd and move one run-time check to compile-time. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Osterlund 提交于
Use kcalloc and kzalloc in pktcdvd. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Osterlund 提交于
In the /proc statistics, only count writes that upper layers have requested. Don't count additional writes created inside the packet driver to satisfy the requirement to only write full packets. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Osterlund 提交于
Update the "theory of operation" description. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Osterlund 提交于
In the packet writing driver, if the drive reports a packet size larger than the driver can handle, bail out safely instead of triggering a BUG_ON. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
Add SCSI host and device info not elsewhere available to /proc/scsi/cciss/* Namely, connect cciss device instance with scsi host number, and give scsi host number, bus, target, lun, devicetype, and 8-byte cciss LUNID for each tapedrive/medium changer attached to a controller For instance: # cat /proc/scsi/cciss/2 cciss0: SCSI host: 2 c2b0t0l0 01 0x0000000000000001 Signed-off-by: NStephen M. Cameron <steve.cameron@hp.com> Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
This patch adds support for "One Button Disaster Recovery" devices to the cciss driver. (OBDR devices are tape drives which can pretend to be cd-rom devices temporarily. Once booted the device can be reverted to a tape drive and data recovery operations can be automatically begun.) This is an enhancement request by a vendor/partner working on One Button Disaster Recovery. Signed-off-by: NStephen M. Cameron <steve.cameron@hp.com> Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
The CCISS driver seems to loose track of DMA mappings created by it's fill_cmd() routine. Neither callers of this routine are extracting the DMA address created in order to do the unmap. Instead, they simply try to unmap 0x0. It's easy to see this problem on an x86_64 system when using the "swiotlb=force" boot option. In this case, the driver is leaking resources of the swiotlb and not causing a sync of the bounce buffer. Signed-off-by: NAlex Williamson <alex.williamson@hp.com> Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
This patch fixes a bug in cciss_remove_one. A set of braces was missing for the if statement causing an Oops on driver unload. Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
This patch changes the way we complete commands. In the old method when we got a completion we searched our command list from the top until we find it. This method uses a tag associated with each command (not SCSI command tagging) to index us directly to the completed command. This helps performance. Signed-off-by: NDon Brace <dab@hp.com> Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
This patch removes a couple of functions dealing with configuration and replaces them with new functions. This implementation fixes some bugs associated with the ACUXE. It also allows a logical volume to be removed from the middle without deleting all volumes behind it. If a user has 5 logical volumes and decides he wants to reconfigure volume number 3, he can now do that without removing volumes 4 & 5 first. This code has been tested in our labs against all application software. Signed-off-by: NChase Maupin <chase.maupin@hp.com> Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
This patch adds a flag called busy_initializing. If there are multiple controllers in a server AND the HP agents are running it's possible the agents may try to poll a card that is still initializing if the driver is removed and then added again. Signed-off-by: NDon Brace <dab@hp.com> Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Miller 提交于
This patch adds new PCI and subsystem ID's that finally made the spec. It also include a name change for one controller. I know there's a lot of duplicat names but the fw folks wanted this for the different implementations. Even though the same ASIC is used it may be embedded on some platforms, standup card in others, and a mezzanine in other servers. Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Osterlund 提交于
Remove check_region references from comments and printk statements so that searching for real users of this deprecated function gets easier. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Unused variable. Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Komuro 提交于
Add new id to orinoco_cs (corega PCCB-11). Signed-off-by: <komurojun-mbn@nifty.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Cox 提交于
Replace the foot long pile of festering garbage in eighty_ninty_three with some actual clean code. All the ifdefs are fixed and havent changed since 2.4 Acked-by: NBartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
More visible user information of scheduled feature removal. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-