Essentially netlink at the moment always reports a pid and sequence of 0
always for v6 route activities. 
To understand the repurcassions of this look at:
http://lists.quagga.net/pipermail/quagga-dev/2005-June/003507.html

While fixing this, i took the liberty to resolve the outstanding issue
of IPV6 routes inserted via ioctls to have the correct pids as well.

This patch tries to behave as close as possible to the v4 routes i.e
maintains whatever PID the socket issuing the command owns as opposed to
the process. That made the patch a little bulky.

I have tested against both netlink derived utility to add/del routes as
well as ioctl derived one. The Quagga folks have tested against quagga.
This fixes the problem and so far hasnt been detected to introduce any
new issues.
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Below is a more generic patch to do fib_lookup via netlink. For others 
we should say that we discussed this as a way to verify route selection.
It's also possible there are others uses for this.

In short the fist half of struct fib_result_nl is filled in by caller 
and netlink call fills in the other half and returns it.

In case anyone is interested there is a corresponding user app to compare 
the full routing table this was used to test implementation of the LC-trie. 
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the xfrm_state_afinfo->init_flags hook which allows
each address family to perform any common initialisation that does
not require a corresponding destructor call.

It will be used subsequently to set the XFRM_STATE_NOPMTUDISC flag
in IPv4.

It also fixes up the error codes returned by xfrm_init_state.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NJames Morris <jmorris@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds xfrm_init_state which is simply a wrapper that calls
xfrm_get_type and subsequently x->type->init_state.  It also gets rid
of the unused args argument.

Abstracting it out allows us to add common initialisation code, e.g.,
to set family-specific flags.

The add_time setting in xfrm_user.c was deleted because it's already
set by xfrm_state_alloc.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NJames Morris <jmorris@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implements sctp_connectx() as defined in the SCTP sockets API draft by
tunneling the request through a setsockopt().
Signed-off-by: NFrank Filz <ffilzlnx@us.ibm.com>
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implements an interface to be used by leaf qdiscs maintaining an internal
skb queue. The interface maintains a backlog in bytes additionaly
to the skb_queue_len() maintained by the queue itself. Relevant statistics
get incremented automatically. Every function comes in two variants, one
assuming Qdisc->q is used as queue and the second taking a sk_buff_head
as argument. Be aware that, if you use multiple queues, you still have to
maintain the Qdisc->q.qlen counter yourself.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To retrieve the neighbour tables send RTM_GETNEIGHTBL with the
NLM_F_DUMP flag set. Every neighbour table configuration is
spread over multiple messages to avoid running into message
size limits on systems with many interfaces. The first message
in the sequence transports all not device specific data such as
statistics, configuration, and the default parameter set.
This message is followed by 0..n messages carrying device
specific parameter sets.

Although the ordering should be sufficient, NDTA_NAME can be
used to identify sequences. The initial message can be identified
by checking for NDTA_CONFIG. The device specific messages do
not contain this TLV but have NDTPA_IFINDEX set to the
corresponding interface index.

To change neighbour table attributes, send RTM_SETNEIGHTBL
with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3],
NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked
otherwise. Device specific parameter sets can be changed by
setting NDTPA_IFINDEX to the interface index of the corresponding
device.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes the CONFIG_INET=n build failure noticed
by Andrew Morton.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This chunks out the accept_queue and tcp_listen_opt code and moves
them to net/core/request_sock.c and include/net/request_sock.h, to
make it useful for other transport protocols, DCCP being the first one
to use it.

Next patches will rename tcp_listen_opt to accept_sock and remove the
inline tcp functions that just call a reqsk_queue_ function.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ok, this one just renames some stuff to have a better namespace and to
dissassociate it from TCP:

struct open_request  -> struct request_sock
tcp_openreq_alloc    -> reqsk_alloc
tcp_openreq_free     -> reqsk_free
tcp_openreq_fastfree -> __reqsk_free

With this most of the infrastructure closely resembles a struct
sock methods subset.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kept this first changeset minimal, without changing existing names to
ease peer review.

Basicaly tcp_openreq_alloc now receives the or_calltable, that in turn
has two new members:

->slab, that replaces tcp_openreq_cachep
->obj_size, to inform the size of the openreq descendant for
  a specific protocol

The protocol specific fields in struct open_request were moved to a
class hierarchy, with the things that are common to all connection
oriented PF_INET protocols in struct inet_request_sock, the TCP ones
in tcp_request_sock, that is an inet_request_sock, that is an
open_request.

I.e. this uses the same approach used for the struct sock class
hierarchy, with sk_prot indicating if the protocol wants to use the
open_request infrastructure by filling in sk_prot->rsk_prot with an
or_calltable.

Results? Performance is improved and TCP v4 now uses only 64 bytes per
open request minisock, down from 96 without this patch :-)

Next changeset will rename some of the structs, fields and functions
mentioned above, struct or_calltable is way unclear, better name it
struct request_sock_ops, s/struct open_request/struct request_sock/g,
etc.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes XFRM_SAP_* and converts them over to XFRM_MSG_*.
The netlink interface is meant to map directly onto the underlying
xfrm subsystem.  Therefore rather than using a new independent
representation for the events we can simply use the existing ones
from xfrm_user.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch turns km_event.data into a union.  This makes code that
uses it clearer.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch ensures that the hard state/policy expire notifications are
only sent when the state/policy is successfully removed from their
respective tables.

As it is, it's possible for a state/policy to both expire through
reaching a hard limit, as well as being deleted by the user.

Note that this behaviour isn't actually forbidden by RFC 2367.
However, it is a quality of implementation issue.

As an added bonus, the restructuring in this patch will help
eventually in moving the expire notifications from softirq
context into process context, thus improving their reliability.

One important side-effect from this change is that SAs reaching
their hard byte/packet limits are now deleted immediately, just
like SAs that have reached their hard time limits.

Previously they were announced immediately but only deleted after
30 seconds.

This is bad because it prevents the system from issuing an ACQUIRE
command until the existing state was deleted by the user or expires
after the time is up.

In the scenario where the expire notification was lost this introduces
a 30 second delay into the system for no good reason.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Heres the final patch.
What this patch provides

- netlink xfrm events
- ability to have events generated by netlink propagated to pfkey
  and vice versa.
- fixes the acquire lets-be-happy-with-one-success issue
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NNeil Horman <nhorman@redhat.com>
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It cannot work properly, so just ignore it in drr
and rr multipath algorithms just like the random
multipath algorithm does.

Suggested by Herbert Xu.

Signed-off by: Pravin B. Shelar <pravins@calsoftinc.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

[XFRM] Call dst_check() with appropriate cookie

This fixes infinite loop issue with IPv6 tunnel mode.
Signed-off-by: NKazunori Miyazawa <kazunori@miyazawa.org>
Signed-off-by: NHideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make it consistent with other net/sched files
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ross moved.  Remove the bad email address so people will find the correct
one in ./CREDITS.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This causes sk->sk_prot to change, which makes the socket
release free the sock into the wrong SLAB cache.  Fix this
by introducing sk_prot_creator so that we always remember
where the sock came from.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Else the in6_addr layout is not known for struct
prefix_info.
Signed-off-by: NPatrick McHardy <kaber@trash.net>

I found a bug that stopped IPsec/IPv6 from working.  About
a month ago IPv6 started using rt6i_idev->dev on the cached socket dst
entries.  If the cached socket dst entry is IPsec, then rt6i_idev will
be NULL.

Since we want to look at the rt6i_idev of the original route in this
case, the easiest fix is to store rt6i_idev in the IPsec dst entry just
as we do for a number of other IPv6 route attributes.  Unfortunately
this means that we need some new code to handle the references to
rt6i_idev.  That's why this patch is bigger than it would otherwise be.

I've also done the same thing for IPv4 since it is conceivable that
once these idev attributes start getting used for accounting, we
probably need to dereference them for IPv4 IPsec entries too.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch includes net/ipv6.h from addrconf.h since it needs
ipv6_addr_set.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some KernelDoc descriptions are updated to match the current code.
No code changes.
Signed-off-by: NMartin Waitz <tali@admingilde.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I have recompiled Linux kernel 2.6.11.5 documentation for me and our
university students again.  The documentation could be extended for more
sources which are equipped by structured comments for recent 2.6 kernels.  I
have tried to proceed with that task.  I have done that more times from 2.6.0
time and it gets boring to do same changes again and again.  Linux kernel
compiles after changes for i386 and ARM targets.  I have added references to
some more files into kernel-api book, I have added some section names as well.
 So please, check that changes do not break something and that categories are
not too much skewed.

I have changed kernel-doc to accept "fastcall" and "asmlinkage" words reserved
by kernel convention.  Most of the other changes are modifications in the
comments to make kernel-doc happy, accept some parameters description and do
not bail out on errors.  Changed <pid> to @pid in the description, moved some
#ifdef before comments to correct function to comments bindings, etc.

You can see result of the modified documentation build at
  http://cmp.felk.cvut.cz/~pisa/linux/lkdb-2.6.11.tar.gz

Some more sources are ready to be included into kernel-doc generated
documentation.  Sources has been added into kernel-api for now.  Some more
section names added and probably some more chaos introduced as result of quick
cleanup work.
Signed-off-by: NPavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: NMartin Waitz <tali@admingilde.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Include chunk and skb sizes in sendbuffer accounting.
- 2 policies are supported. 0: per socket accouting, 1: per association
  accounting

DaveM: I've made the default per-socket.
Signed-off-by: NNeil Horman <nhorman@redhat.com>
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Fixed sctp_vtag_verify_either() to comply with impguide 2.41 B) and C).
- Make sure vtag is reflected when T-bit is set in SHUTDOWN-COMPLETE sent
  due to an OOTB SHUTDOWN-ACK and in ABORT sent due to an OOTB packet.
- Do not set T-Bit in ABORT chunk in response to INIT.
- Fixed some comments to reflect the new meaning of the T-Bit.
Signed-off-by: NJerome Forissier <jerome.forissier@hp.com>
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SELinux hooks invoke ipv6_skip_exthdr() with an incorrect
length final argument.  However, the length argument turns out
to be superfluous.

I was just reading ipv6_skip_exthdr and it occured to me that we can
get rid of len altogether.  The only place where len is used is to
check whether the skb has two bytes for ipv6_opt_hdr.  This check
is done by skb_header_pointer/skb_copy_bits anyway.

Now it might appear that we've made the code slower by deferring
the check to skb_copy_bits.  However, this check should not trigger
in the common case so this is OK.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And provide an example simply action in order to
demonstrate usage.
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The problem is that when doing MTU discovery, the too-large segments in
the write queue will be calculated as having a pcount of >1.  When
tcp_write_xmit() is trying to send, tcp_snd_test() fails the cwnd test
when pcount > cwnd.

The segments are eventually transmitted one at a time by keepalive, but
this can take a long time.

This patch checks if TSO is enabled when setting pcount.
Signed-off-by: NJohn Heffner <jheffner@psc.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replacing the open coded equivalents and making ax25 look more like
a linux network protocol, i.e. more similar to inet.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I.e. not using skb->dev as a way to pass the parameter used to fill...
skb->dev :-)

Also to get the _type_trans open coded sequence grouped, next changesets
will introduce ax25_type_trans.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This allows to use them on x86-64
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>