Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 3 年多

通知 13
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 28 4月, 2009 9 次提交
    • T
      block: kill blk_end_request_callback() · 0b302d5a
      由 Tejun Heo 提交于 
      With recent IDE updates, blk_end_request_callback() doesn't have any
user now.  Kill it.

[ Impact: removal of unused convoluted interface ]
Signed-off-by: NTejun Heo <tj@kernel.org>
      0b302d5a
    • T
      block: reorder request completion functions · 5efccd17
      由 Tejun Heo 提交于 
      Reorder request completion functions such that

* All request completion functions are located together.

* Functions which are used by only one caller is put right above the
  caller.

* end_request() is put after other completion functions but before
  blk_update_request().

This change is for completion function cleanup which will follow.

[ Impact: cleanup, code reorganization ]
Signed-off-by: NTejun Heo <tj@kernel.org>
      5efccd17
    • T
      block: kill blk_start_queueing() · a7f55792
      由 Tejun Heo 提交于 
      blk_start_queueing() is identical to __blk_run_queue() except that it
doesn't check for recursion.  None of the current users depends on
blk_start_queueing() running request_fn directly.  Replace usages of
blk_start_queueing() with [__]blk_run_queue() and kill it.

[ Impact: removal of mostly duplicate interface function ]
Signed-off-by: NTejun Heo <tj@kernel.org>
      a7f55792
    • T
      ide-atapi: kill unused fields and callbacks · 29d1a437
      由 Tejun Heo 提交于 
      Impact: remove fields and code paths which are no longer necessary

Now that ide-tape uses standard mechanisms to transfer data, special
case handling for bh handling can be dropped from ide-atapi.  Drop the
followings.

* pc->cur_pos, b_count, bh and b_data
* drive->pc_update_buffers() and pc_io_buffers().
Signed-off-by: NTejun Heo <tj@kernel.org>
      29d1a437
    • T
      ide-cd,atapi: use bio for internal commands · 02e7cf8f
      由 Tejun Heo 提交于 
      Impact: unify request data buffer handling

rq->data is used mostly to pass kernel buffer through request queue
without using bio.  There are only a couple of places which still do
this in kernel and converting to bio isn't difficult.

This patch converts ide-cd and atapi to use bio instead of rq->data
for request sense and internal pc commands.  With previous change to
unify sense request handling, this is relatively easily achieved by
adding blk_rq_map_kern() during sense_rq prep and PC issue.

If blk_rq_map_kern() fails for sense, the error is deferred till sense
issue and aborts the failed command which triggered the sense.  Note
that this is a slim possibility as sense prep is done on each command
issue, so for the above condition to actually trigger, all preps since
the last sense issue till the issue of the request which would require
a sense should fail.

* do_request functions might sleep now.  This should be okay as ide
  request_fn - do_ide_request() - is invoked only from make_request
  and plug work.  Make sure this is the case by adding might_sleep()
  to do_ide_request().

* Functions which access the read sense data before the sense request
  is complete now should access bio_data(sense_rq->bio) as the sense
  buffer might have been copied during blk_rq_map_kern().

* ide-tape updated to map sg.

* cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC
  special case.  Simplified.

* tp_ops->output/input_data path dropped from ide_pc_intr().
Signed-off-by: NTejun Heo <tj@kernel.org>
      02e7cf8f
    • B
      ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer · 06875320
      由 Borislav Petkov 提交于 
      Since we're issuing REQ_TYPE_SENSE now we need to allow those types of
rqs in the ->do_request callbacks. As a future improvement, sense_len
assignment might be unified across all ATAPI devices. Borislav to
check with specs and test.

As a result, get rid of ide_queue_pc_head() and
drive->request_sense_rq.

tj: * Init request sense ide_atapi_pc from sense request.  In the
      longer timer, it would probably better to fold
      ide_create_request_sense_cmd() into its only current user -
      ide_floppy_get_format_progress().

    * ide_retry_pc() no longer takes @disk.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
      06875320
    • B
      ide: add helpers for preparing sense requests · e69d800f
      由 Borislav Petkov 提交于 
      This is in preparation of removing the queueing of a sense request out
of the IRQ handler path.

Use struct request_sense as a general sense buffer for all ATAPI
devices ide-{floppy,tape,cd}.

tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as
      it can cause deadlock.  Converted to use inline struct request
      and blk_rq_init().

    * Added xfer / cdb len selection depending on device type.

    * All sense prep logics folded into ide_prep_sense() which never
      fails.

    * hwif->rq clearing and sense_rq used handling moved into
      ide_queue_sense_rq().

    * blk_rq_map_kern() conversion is moved to later patch.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
      e69d800f
    • T
      ide kill unused ide_cmd->special · 214ae191
      由 Tejun Heo 提交于 
      Impact: removal of unused field

No one uses ide_cmd->special anymore.  Kill it.
Signed-off-by: NTejun Heo <tj@kernel.org>
      214ae191
    • A
      loop: use BIO list management functions · e686307f
      由 Akinobu Mita 提交于 
      Now that the bio list management stuff is generic, convert loop to use
bio lists instead of its own private bio list implementation.

Cc:  Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      e686307f
  3. 27 4月, 2009 1 次提交
    • T
      Add new HEAD_TEXT_SECTION macro. · c80d471a
      由 Tim Abbott 提交于 
      This patch is preparation for replacing all uses of ".head.text" or
".text.head" in the kernel with macros, so that the section name can
later be changed without having to touch a lot of the kernel.

Since some linker scripts do more complex things than referencing
HEAD_TEXT, we add a HEAD_TEXT_SECTION macro that just contains the
actual name.

I've defined HEAD_TEXT_SECTION in a new header,
include/linux/section-names.h, so that this section name only needs to
appear in one place.  I anticipate creating similar macro structures
for a number of other section names.

The long-term goal here is to be able to change the kernel's magic
section names to those that are compatible with -ffunction-sections
-fdata-sections.  This requires renaming all magic sections with names
of the form ".text.foo".
Signed-off-by: NTim Abbott <tabbott@mit.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c80d471a
  5. 24 4月, 2009 3 次提交
  7. 23 4月, 2009 1 次提交
  9. 22 4月, 2009 13 次提交
  11. 21 4月, 2009 6 次提交
  13. 20 4月, 2009 2 次提交
    • R
      PM/Suspend: Introduce two new platform callbacks to avoid breakage · 6a7c7eaf
      由 Rafael J. Wysocki 提交于 
      Commit 900af0d9 (PM: Change suspend
code ordering) changed the ordering of suspend code in such a way
that the platform .prepare() callback is now executed after the
device drivers' late suspend callbacks have run.  Unfortunately, this
turns out to break ARM platforms that need to talk via I2C to power
control devices during the .prepare() callback.

For this reason introduce two new platform suspend callbacks,
.prepare_late() and .wake(), that will be called just prior to
disabling non-boot CPUs and right after bringing them back on line,
respectively, and use them instead of .prepare() and .finish() for
ACPI suspend.  Make the PM core execute the .prepare() and .finish()
platform suspend callbacks where they were executed previously (that
is, right after calling the regular suspend methods provided by
device drivers and right before executing their regular resume
methods, respectively).

It is not necessary to make analogous changes to the hibernation
code and data structures at the moment, because they are only used
by ACPI platforms.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NLen Brown <len.brown@intel.com>
      6a7c7eaf
    • R
      <linux/seccomp.h> needs to include <linux/errno.h>. · 42a17ad2
      由 Ralf Baechle 提交于 
      <linux/seccomp.h> uses EINVAL so should include <linux/errno.h>.  This
fixes a build error on 64-bit MIPS if CONFIG_SECCOMP is disabled.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      42a17ad2
  15. 18 4月, 2009 1 次提交
    • D
      USB: add reset endpoint operations · 3444b26a
      由 David Vrabel 提交于 
      Wireless USB endpoint state has a sequence number and a current
window and not just a single toggle bit.  So allow HCDs to provide a
endpoint_reset method and call this or clear the software toggles as
required (after a clear halt, set configuration etc.).

usb_settoggle() and friends are then HCD internal and are moved into
core/hcd.h and all device drivers call usb_reset_endpoint() instead.

If the device endpoint state has been reset (with a clear halt) but
the host endpoint state has not then subsequent data transfers will
not complete. The device will only work again after it is reset or
disconnected.
Signed-off-by: NDavid Vrabel <david.vrabel@csr.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      3444b26a
  17. 17 4月, 2009 4 次提交
    • J
      Driver core: remove pr_fmt() from dynamic_dev_dbg() printk · 7607b1d6
      由 Jason Baron 提交于 
      When pr_fmt() was added to the pr_debug() code, we added it not only to the
dynamic_pr_debug() function, but also to the dynamic_dev_dbg() funciton.
However, dev_dbg() doesn't make use of pr_fmt(), so neither should
dynamic_dev_dbg().
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      7607b1d6
    • M
      dynamic debug: resurrect old pr_debug() semantics as pr_devel() · 4ccb4579
      由 Michael Ellerman 提交于 
      pr_debug() used to produce zero code unless DEBUG was #defined.  This is
now no longer the case in practice[1].

There are places where it's useful to have debugging printks, but we don't
want them to generate any code in production kernels.

So add a new macro, pr_devel(), for _devel_opment, to provide the old
semantics, ie.  if the programmer doesn't explicitly enable debugging, no
code is produced.

[1]: You can turn CONFIG_DYNAMIC_DEBUG off, but it's enabled in at least
     one distro kernel, so it's not really a solution.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Greg Banks <gnb@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      4ccb4579
    • M
      Driver Core: early platform driver · 13977091
      由 Magnus Damm 提交于 
      V3 of the early platform driver implementation.

Platform drivers are great for embedded platforms because we can separate
driver configuration from the actual driver.  So base addresses,
interrupts and other configuration can be kept with the processor or board
code, and the platform driver can be reused by many different platforms.

For early devices we have nothing today.  For instance, to configure early
timers and early serial ports we cannot use platform devices.  This
because the setup order during boot.  Timers are needed before the
platform driver core code is available.  The same goes for early printk
support.  Early in this case means before initcalls.

These early drivers today have their configuration either hard coded or
they receive it using some special configuration method.  This is working
quite well, but if we want to support both regular kernel modules and
early devices then we need to have two ways of configuring the same
driver.  A single way would be better.

The early platform driver patch is basically a set of functions that allow
drivers to register themselves and architecture code to locate them and
probe.  Registration happens through early_param().  The time for the
probe is decided by the architecture code.

See Documentation/driver-model/platform.txt for more details.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      13977091
    • A
      ata: Report 16/32bit PIO as best we can · e3cf95dd
      由 Alan Cox 提交于 
      The legacy old IDE ioctl API for this is a bit primitive so we try
and map stuff sensibly onto it.

- Set PIO over DMA devices to report 32bit
- Add ability to change the PIO32 settings if the controller permits it
- Add that functionality into the sff drivers
- Add that functionality into the VLB legacy driver
- Turn on the 32bit PIO on the ninja32 and add support there
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      e3cf95dd