Before this patch, when a platform needed to customize one constant in
spaces.h, they need to redefine all of them.

Now they can just redefine one constant and include the generic file
header at the end:

	#include <asm/mach-generic/spaces.h>

This patch doesn't allow to redefine CAC_BASE, IO_BASE and UNCAC_BASE
for 32 bits platforms because there's no need to do so.

This will avoid some macro duplications. It's important specially if
we'll add complex macros.
Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 delete mode 100644 include/asm-mips/mach-ip32/spaces.h

It shares no code at all.  While at it also fix up the beginning bitrot.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

No point in adding yet another #ifdef for Loongson since all this mask is
being used for is converting an XKPHYS address into a physical address
anyway.  So replace all definitions by one with the highest architectural
possible value.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds support for the generic GPIO API to Au1x00 boards. It requires
the generic GPIO patch for MIPS boards by Yoichi Yuasa. Now there is a MIPS
target using it, can you queue these patchset for 2.6.22 ? Thank you very
much in advance.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Create fallback gpio.h which only contains prototypes for gpio API.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

"extern inline" will have different semantics with gcc 4.3, and
"static inline" is correct here.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The isochronous packet format is still not documented, but this
is a good first step.
Signed-off-by: NKristian Høgsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (format, wording)

This patch allows users to override both host and device side cable detection
with "ideX=ata66" kernel parameter.  Thanks to this it should be now possible
to use UDMA > 2 modes on systems (laptops mainly) which use short 40-pin cable
instead of 80-pin one.

Next patches add automatic detection of some systems using short cables.

Changes:

* Rename hwif->udma_four to hwif->cbl and make it u8.

* Convert all existing users accordingly (use ATA_CBL_* defines while at it).  

* Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three().

* Use ATA_CBL_PATA40_SHORT for "ideX=ata66" kernel parameter.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>

This updates the DMA whitelist in MIPS specific au1xxx ide
driver to use NULL instead of "ALL" as the wildcard.
Signed-off-by: NJunio C Hamano <junkio@cox.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The IDE driver uses a semaphore as mutex.
Use the mutex API instead of the (binary) semaphore.
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

--

The IDE driver uses a semaphore as mutex.
Use the mutex API instead of the (binary) semaphore.
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Since ide_dma_timeout() method's result is discarded, make it return 'void'.
While at it, drop 'ide_' from the method's name, drop the '__' prefix from
the default method's name, and do some cleanups in this method driver-wise:

- in ide-dma.c, au1xxx-ide.c, and pdc202xx_old.c, define/use 'hwif' variable;

- in au1xxx-ide.c, get rid of commented out printk();

- in sl82c105.c, get rid of unnecessary variables.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Since ide_dma_lostirq() method's result is discarded, make it return 'void'.
While at it, rename the method to dma_lost_irq(), drop the '__' prefix from the
default method's name, and do some cleanups in this method driver-wise:

- in aec62xx.c, rename the method in accordance with other drivers, and get rid
  of unnecessary variables there;

- in pdc202xx_old.c, define/use 'hwif' variable;

- in sgiioc4.c, rearrange the code to call the resetproc() method directly.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

micro-optimize mmdrop(). Improves schedule()'s assembly a bit.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

the Linux scheduler is starving a number of workloads. So default
to more agressive idle-balancing. This hurts lmbench context-switching
numbers (which was the main reason we sucked at idle-balancing for
such a long time) but the lmbench numbers are fine once the system is
minimally utilized.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

clean up the sleep_on() APIs:

 - do not use fastcall
 - replace fragile macro magic with proper inline functions
Signed-off-by: NIngo Molnar <mingo@elte.hu>

simplify sched_rt.c's sched_find_first_bit() function: there are
only 100 RT priority levels left.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

scheduler debugging core: implement /proc/sched_debug and
/proc/<PID>/sched files for scheduler debugging.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

remove the old cpu-accounting field from signal_struct, now
that the code is using CFS's stats.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

batch_task() in sched.h is now unused - remove it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

remove now-unused types/fields used by the old scheduler.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

sched_fork()/sched_exit() does not need to specify fastcall anymore,
as the x86 kernel defaults to regparm3, and no assembly code calls
these functions.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

update delay-accounting to use CFS's precise stats.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

track TSC-unstable events and propagate it to the scheduler code.
Also allow sched_clock() to be used when the TSC is unstable,
the rq_clock() wrapper creates a reliable clock out of it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

remove the sleep_type heuristics from the core scheduler - scheduling
policy is implemented in the scheduling-policy modules. (and CFS does
not use this type of sleep-type heuristics)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

clean up the rt priority macros, pointed out by Andrew Morton.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

update the posix-cpu-timers code to use CFS's CPU accounting information.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

add the CFS data types to sched.h.

(the old scheduler is still fully intact.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

add kernel/sched_fair.c - which implements the bulk of CFS's
behavioral changes for SCHED_OTHER tasks.

see Documentation/sched-design-CFS.txt about details.

Authors:

 Ingo Molnar <mingo@elte.hu>
 Dmitry Adamushko <dmitry.adamushko@gmail.com>
 Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
 Mike Galbraith <efault@gmx.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>

increase SMP-nice's resolution. This is needed by CFS to
implement SCHED_IDLE and cleaned up nice level support.

no behavioral changes.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

add the init_idle_bootup_task() callback to the bootup thread,
unused at the moment. (CFS will use it to switch the scheduling
class of the boot thread to the idle class)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

add in_atomic_preempt_off() - debugging helper that will
simplify schedule().
Signed-off-by: NIngo Molnar <mingo@elte.hu>

uninline set_task_cpu(): CFS will add more code to it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

the SMP load-balancer uses the boot-time migration-cost estimation
code to attempt to improve the quality of balancing. The reason for
this code is that the discrete priority queues do not preserve
the order of scheduling accurately, so the load-balancer skips
tasks that were running on a CPU 'recently'.

this code is fundamental fragile: the boot-time migration cost detector
doesnt really work on systems that had large L3 caches, it caused boot
delays on large systems and the whole cache-hot concept made the
balancing code pretty undeterministic as well.

(and hey, i wrote most of it, so i can say it out loud that it sucks ;-)

under CFS the same purpose of cache affinity can be achieved without
any special cache-hot special-case: tasks are sorted in the 'timeline'
tree and the SMP balancer picks tasks from the left side of the
tree, thus the most cache-cold task is balanced automatically.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

this patch adds the SCHED_IDLE policy to sched.h.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

enum idle_type (used by the load-balancer) clashes with the
SCHED_IDLE name that we want to introduce. 'CPU_IDLE' instead
of 'SCHED_IDLE' is more descriptive as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This keyboard has wireless mouse which has left, middle, right buttons and
2-dimensional scrolling wheel.  Unfornetuly, this wheel reports side scrolling
events and 11 or 12 button events at the same time.

I've wrote a patch to fix this mapping.  I'm not sure if this mapping is proper
for buttons, because , for example, there is no entry for "burn cd" in input.h.

The patch also supress 11 and 12 button events from mouse when you scroll the
wheel left and right.  With this patch, only side scrolling events are
reported.  (This mouse has only 4 buttons and 2D wheel. There is no such
buttons like 11 and 12.)
Signed-off-by: NJiri Kosina <jkosina@suse.cz>