Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

modpost had two cases hardcoded for mm/
Shift over to __init_refok and kill the
hardcoded function names in modpost.

This has the drawback that the functions
will always be kept no matter configuration.
With previous code the function were placed in
init section if configuration allowed it.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Kill a special case in modpost by introducing the
__init_refok marker.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Throughout the kernel there are a few legitimite references
to init or exit sections. Most of these are covered by the
patterns included in modpost but a few nees special attention.
To avoid hardcoding a lot of function names in modpost introduce
a marker so relevant function/data can be marked.
When modpost see a reference to a init/exit function from
a function/data marked no warning will be issued.

Idea from: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>

This patch fixes the following class of "Section mismatch" warnings when
building powerpc platforms.

WARNING: arch/powerpc/kernel/built-in.o - Section mismatch: reference to .init.data:.got2 from prom_entry (offset 0x0)
WARNING: arch/powerpc/platforms/built-in.o - Section mismatch: reference to .init.text:mpc8313_rdb_probe from .machine.desc after 'mach_mpc8313_rdb' (at offset 0x4)
....
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

On i386, ARM and MIPS, warn_sec_mismatch() sometimes fails to show
usefull symbol name.  This is because empty 'refsym' due to 0 r_addend
value.  This patch is to adjust r_addend value, consulting with
apply_relocate() routine in kernel code.

Without this patch:
  MODPOST vmlinux
WARNING: init/built-in.o - Section mismatch: reference to .init.text: from .text between 'rest_init' (at offset 0xf4) and 'try_name'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text: from .text between 'kmem_cache_create' (at offset 0x18a39) and 'cache_reap'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text: from .text between 'kmem_cache_create' (at offset 0x18a6b) and 'cache_reap'

With this patch:
  MODPOST vmlinux
WARNING: mm/built-in.o - Section mismatch: reference to .init.text:set_up_list3s from .text between 'kmem_cache_create' (at offset 0x18a39) and 'cache_reap'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text:set_up_list3s from .text between 'kmem_cache_create' (at offset 0x18a6b) and 'cache_reap'

Now modpost can detect "kernel_init" name (and whitelist it) and show
"set_up_list3s" name.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Change modpost section mismatch warnings to be less confusing;
model them on the binutils linker warnings which we all know how
to interpret.

Also, fix the wrong ordering of arguments for the final case -
fromsec and refsymname were reversed.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NAcked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The check-lxdialog.sh script searches for "libFOO.so" which fails on OS X, due
to their special naming of libraries like "libfoo.dylib".  This patch turns
the curses lib search into extensible loops and adds dylib as a valid
extension.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

POSIX says limits.h defines PATH_MAX so we should include it (which fixes
compiling on some systems like OS X).
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Since the devices may have multiple (or none) compatible properties,
the uevent generated internally by the kernel may have multiple
"C..." entries. So the MODALIAS stored in the module must have
wilcard before and after the compatible entry.
Also, if the 'compatible' field is not used for matching, there
will be no 'C' and that must handled as well.

The previous code handled all those case incorrectly and it
"mostly" worked ... but not always.
Signed-off-by: NSylvain Munaut <tnt@246tNt.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This will later allow an arch to add module specific information via linker
generated tables instead of poking directly in the module object structure.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Get the kernel version string only once from the environment, thus slightly
speeding up kernel-doc.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMichael Opdenacker <michael@free-electrons.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

This patch shuts warnings of the sort:

make -C /mnt/samsung_200/sam/kernel/trees/21-rc6/build \
	KBUILD_SRC=/mnt/samsung_200/sam/kernel/trees/21-rc6 \
	KBUILD_EXTMOD="" -f /mnt/samsung_200/sam/kernel/trees/21-rc6/Makefile mandocs
make -f /mnt/samsung_200/sam/kernel/trees/21-rc6/scripts/Makefile.build obj=scripts/basic
make -f /mnt/samsung_200/sam/kernel/trees/21-rc6/scripts/Makefile.build obj=Documentation/DocBook mandocs
  SRCTREE=/mnt/samsung_200/sam/kernel/trees/21-rc6/ /mnt/samsung_200/sam/kernel/trees/21-rc6/build/scripts/basic/docproc doc /mnt/samsung_200/sam/kernel/trees/21-rc6/Documentation/DocBook/wanbook.tmpl >Documentation/DocBook/wanbook.xml
  if grep -q refentry Documentation/DocBook/wanbook.xml; then xmlto man -m /mnt/samsung_200/sam/kernel/trees/21-rc6/Documentation/DocBook/stylesheet.xsl -o Documentation/DocBook/man Documentation/DocBook/wanbook.xml ; gzip -f Documentation/DocBook/man/*.9; fi
Note: meta version: No productnumber or alternative     sppp_close
Note: meta version: No refmiscinfo@class=version        sppp_close
Note: Writing sppp_close.9
Note: meta version: No productnumber or alternative     sppp_open
Note: meta version: No refmiscinfo@class=version        sppp_open

by adding a RefMiscInfo xml tag in the form of the current kernel version
to the function, struct and enum definitions in files included by
kernel-doc when building 'mandocs'.  However, the version string appears
truncated on the manpage due to some constraints in the xml DTD for the man
header, I believe, for the troff output is truncated too.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Johannes Berg reported that struct names are not highlighted
(bold, italic, etc.) in html kernel-doc output.  (Also not in
text-mode output, but I don't see that changing.)

This patch adds the following:
- highlight struct names in html output mode
- highlight environment var. names in html output mode
- indent struct fields in the original struct layout
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In a different approach here's a patch that handles the special case of
composite arithmetic expressions in array size initializers.  With it,
prior to pushing the split strings on the @first_arg array, I split the
keywords before the array name as before and then keep the array name along
with the subscript expression as a single whole element which gets pushed
last.  In this manner, kernel-doc produces correct output without removing
whitespaces which makes the array subscripts unreadable in the docs.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Whitespace cleanup only:  convert some series of spaces to tabs.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is add white list into modpost.c for some functions and
ia64's section to fix section mismatchs.

  sparse_index_alloc() and zone_wait_table_init() calls bootmem allocator
  at boot time, and kmalloc/vmalloc at hotplug time. If config
  memory hotplug is on, there are references of bootmem allocater(init text)
  from them (normal text). This is cause of section mismatch.

  Bootmem is called by many functions and it must be
  used only at boot time. I think __init of them should keep for
  section mismatch check. So, I would like to register sparse_index_alloc()
  and zone_wait_table_init() into white list.

  In addition, ia64's .machvec section is function table of some platform
  dependent code. It is mixture of .init.text and normal text. These
  reference of __init functions are valid too.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix!  Tinyboards.

The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc.  (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000.  Since then ADI has put this core into its Blackfin
processor family of devices.  The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set.  It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.

The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf

The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc

This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/

We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel

[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NAubrey Li <aubrey.li@analog.com>
Signed-off-by: NJie Zhang <jie.zhang@analog.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I have found small bug in mconf, when you run it without any argument it
will sigsegv.

Without patch:
$ scripts/kconfig/mconf
Segmentation fault

With patch:
$ scripts/kconfig/mconf
can't find file (null)
Signed-off-by: NMarcin Garski <mgarski@post.pl>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

To introduce support for source in one directory but output files
in another directory during a non O= build prefix all paths
with $(src) repsectively $(obj).
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Sample:
config FOO
	bool "This is foo"
	depends on BAR

config BAR
	bool "This is bar"
	depends on FOO

This will result in following error message:
error: found recursive dependency: FOO -> BAR -> FOO

And will then exit with exit code equal 1 so make will stop.
Inspired by patch from: Adrian Bunk <bunk@stusta.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Roman Zippel <zippel@linux-m68k.org>

build scripts: fixdep blows segfault on string CONFIG_MODULE seen

The string "CONFIG_MODULE" appearing anywhere in a source file causes
fixdep to segfault.  This string appeared in the wild in the current
mISDN sources (I think they meant CONFIG_MODULES).  But it shouldn't
segfault (esp as CONFIG_MODULE appeared in a quoted string).
Signed-off-by: NAndy Green <andy@warmcat.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Correct a minor spelling mistake in a Kconfig warning message.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Somewhat in reponse to kernel bugzilla #8197, be more explicit about
why 'make all' fails when there is no .config file.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

If the find(1) in scripts/gen_initramfs_list.sh generates any errors, it
will cause gen_initramfs_list.sh to fail (because of "set -e"), however
the errors from find are not printed to the user. This is rather confusing:

~/src/powerpc$ make O=~/build/powerpc-cell32/
make[2]: *** [usr/initramfs_data.cpio.gz] Error 1
make[1]: *** [usr] Error 2
make[1]: *** Waiting for unfinished jobs....
make[1]: *** wait: No child processes.  Stop.
make: *** [_all] Error 2

It is much easier to work out what the problem is if we let the errors
from find hit the console, eg:

~/src/powerpc$ make O=~/build/powerpc-cell32/
find: /home/michael/initramfs-source/home: Permission denied
find: /home/michael/initramfs-source/lost+found: Permission denied
find: /home/michael/initramfs-source/opt: Permission denied
find: /home/michael/initramfs-source/root: Permission denied
make[2]: *** [usr/initramfs_data.cpio.gz] Error 1
make[1]: *** [usr] Error 2
make[1]: *** Waiting for unfinished jobs....
make[1]: *** wait: No child processes.  Stop.
make: *** [_all] Error 2
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

We do not support qt4 (yet) so the simple fix was to warn
that qt3 are missing.
The better fix would have been to implment qt4 support
but that has failed so far.

This solves http://bugzilla.kernel.org/show_bug.cgi?id=8277Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Make kbuild handle compressed cpio initramfs-es.  An already compressed
cpio is copied directly to usr/, while a non-compressed cpio is filtered
through gzip (no changes here) on its way to usr/.

If the user has created a compressed cpio by other means, this saves him
from uncompressing it, just to be compressed again by kbuild.
Signed-off-by: NAlex Landau <landau.alex@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Added on request from:  Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc:  Rusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

I'm currently using CROSS_COMPILE="ccache arm-linux-".  With that the bash
builtin command "type" searches for ccache and arm-linux-mkimage and so sets
MKIMAGE="/path/to/ccache" as I don't have arm-linux-mkimage.  Then the script
dies with an error, that ccache doesn't support the argument -A.

This patch adds some quoting such that it works again for me.

Please note that this patch doesn't help you if you use ${CROSSCOMPILE}-mkimage
and ccache as mkuboot.sh now searches for the command
"ccache arm-linux-mkimage".
Signed-off-by: NUwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Nigel Cunningham <nigel@nigel.suspend2.net> noticed
that 'make mrproper' did not remove mconf.
Fixed so we now remove all relevant binaries.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc:  Nigel Cunningham <nigel@nigel.suspend2.net>

Export and use the function conf_get_configname()
to retreive the default configuration filename.

Suggested by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Introduce KBUILD_BUILD_VERSION to make it
possible to override kernel build version
during build time.

Introduce KBUILD_BUILD_TIMESTAMP to make it
possible to override kernel build timestamp
during build time.

But variables are useful mainly by distros
that want to pass info from an SCM when
building the kernel. Timestamp could be last
checkin date for a file etc.

The idea came from Olaf Hering <olaf@aepfle.de>

Cc: Olaf Hering <olaf@aepfle.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Most system calls seems to get added to i386 first. This patch
automatically generates a warning for any new system call which is
implemented on i386 but not the architecture currently being compiled.
On PowerPC at the moment, for example, it results in these warnings:
init/missing_syscalls.h:935:3: warning: #warning syscall sync_file_range not implemented
init/missing_syscalls.h:947:3: warning: #warning syscall getcpu not implemented
init/missing_syscalls.h:950:3: warning: #warning syscall epoll_pwait not implemented

The file scripts/checksyscalls.sh list a number of legacy system calls
that are ignored because they only makes sense on i386 systems.

Other contributors to this patch are Russell King <rmk+lkml@arm.linux.org.uk>
and Stéphane Jourdois <kwisatz@rubis.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

modpost is now called with .o files that are not modules.
So do not warn if there is no corresponding .mod
file listing .o files (in .tmp_versions/).
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

When loading an alternate configuration use that file as
current configuration filename.
Make the filename visible in the dialog.
Default continue to be .config.

Inspired by patch from: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc:  Cyrill Gorcunov <gorcunov@gmail.com>

Some of modpost's warnings are fatal, and some are not.  Adopt the
compiler distinction between errors and warnings by calling merror()
for fatal diagnostics and warn() for non-fatal ones.
merror() was used as replacemtn for error() to avoid clash with glibc
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

When changing current menu in search dialog update also main view
Signed-off-by: NMarco Costalba <mcostalba@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The index() function is obsolete, use strchr() instead.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>