We would allocate one specific exception stack for each kind of
non-base exceptions for every CPU. For ppc32 the CPU hard ID is
used as the subscript to get the specific exception stack for
one CPU. But for an UP kernel, there is only one element in the
each kind of exception stack array. We would get stuck if the
CPU hard ID is not equal to '0'. So in this case we should use the
subscript '0' no matter what the CPU hard ID is.
Signed-off-by: NKevin Hao <haokexin@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Default CONFIG_PANIC_TIMEOUT to 180 seconds on powerpc. The
pSeries continue to set the timeout to 10 seconds at run-time.

Thus, there's a small window where we don't have the correct
value on pSeries, but if this is only run-time discoverable we
don't have a better option. In any case, if the user changes the
default setting of 180 seconds, we honor that user setting.
Signed-off-by: NJason Baron <jbaron@akamai.com>
Cc: benh@kernel.crashing.org
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: mpe@ellerman.id.au
Cc: felipe.contreras@gmail.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/705bbe0f70fb20759151642ba0176a6414ec9f7a.1385418410.git.jbaron@akamai.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Move the few declarations from arch/powerpc/kernel/setup.h
into arch/powerpc/include/asm/setup.h.  This resolves a
sparse warning for arch/powerpc/mm/numa.c which defines
do_init_bootmem() but can't include the setup.h header
in the prior path.

Resolves:
arch/powerpc/mm/numa.c:998:13:
        warning: symbol 'do_init_bootmem' was not declared.
                 Should it be static?
Signed-off-by: NRobert C Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

At console init, when the kernel tries to flush the log buffer
the ePAPR byte-channel based console write fails silently,
losing the buffered messages.
This happens because The ePAPR para-virtualization init isn't
done early enough so that the hcall instruction to be set,
causing the byte-channel write hcall to be a nop.
To fix, change the ePAPR para-virt init to use early device
tree functions and move it in early init.
Signed-off-by: NLaurentiu Tudor <Laurentiu.Tudor@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

Currently, BOOKE watchdog code for checking "wdt" and "wdt_period" is
in setup_32.c, it cannot be used in 64-bit, so move it to a common place
setup-common.c, which will be shared by 32-bit and 64-bit.

Also, replace the simple_strtoul with kstrtol.
Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Commit ae3a197e (Disintegrate asm/system.h for PowerPC) broke build of
assembly files when CONFIG_BOOKE_WDT is enabled as follows:

  AS      arch/powerpc/lib/string.o
/home/baruch/git/stable/arch/powerpc/include/asm/reg_booke.h: Assembler messages:
/home/baruch/git/stable/arch/powerpc/include/asm/reg_booke.h:19: Error: Unrecognized opcode: `extern'
/home/baruch/git/stable/arch/powerpc/include/asm/reg_booke.h:20: Error: Unrecognized opcode: `extern'

Since setup_32.c is the only user of the booke_wdt configuration variables, move
the declarations there.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Disintegrate asm/system.h for PowerPC.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
cc: linuxppc-dev@lists.ozlabs.org

kdump fails because we try to execute an HV only instruction. Feature
fixups are being applied after we copy the exception vectors down to 0
so they miss out on any updates.

We have always had this issue but it only became critical in v3.0
when we added CFAR support (breaks POWER5) and v3.1 when we added
POWERNV (breaks everyone).
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: <stable@kernel.org> [v3.0+]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

u64 is used rather than phys_addr_t to keep things simple, as
this is called from assembly code.

Update callers to pass a 64-bit address in r3/r4.  Other unused
register assignments that were once parameters to machine_init
are dropped.

For FSL BookE, look up the physical address of the device tree from the
effective address passed in r3 by the loader.  This is required for
situations where memory does not start at zero (due to AMP or IOMMU-less
virtualization), and thus the IMA doesn't start at zero, and thus the
device tree effective address does not equal the physical address.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Kernel loadable module can use hard_smp_processor_id() if building with SMP
kernel. In order to make it work for UP kernels too, boot_cpuid_phys
symbol (which is what hard_smp_processor_id() macro resolves to
in non-SMP configuration) must be exported.
Signed-off-by: NAndrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Since other OS's may be running on the other cores don't use tlbivax
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

smp_release_cpus() waits for all cpus (including the bootcpu) due to an
off-by-one count on boot_cpu_count (which is all CPUs).  This patch replaces
that with spinning_secondaries (which is all secondary CPUs).
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We need to wait a bit for them to have done their CPU setup
or we might end up with translation and EE on with different
LPCR values between threads
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

First we check to see if we are the first core booting up. This
is accomplished by comparing the boot_cpuid with -1, if it is we
assume this is the first core coming up.

Secondly, we need to update the initial thread info structure
to reflect the actual cpu we are running on otherwise
smp_processor_id() and related functions will return the default
initialization value of the struct or 0.
Signed-off-by: NMatthew McClintock <msm@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The interrupt stacks need to be indexed by the physical cpu since the
critical, debug and machine check handlers use the contents of SPRN_PIR to
index the critirq_ctx, dbgirq_ctx, and mcheckirq_ctx arrays.
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

This introduce memblock.current_limit which is used to limit allocations
from memblock_alloc() or memblock_alloc_base(..., MEMBLOCK_ALLOC_ACCESSIBLE).

The old MEMBLOCK_ALLOC_ANYWHERE changes value from 0 to ~(u64)0 and can still
be used with memblock_alloc_base() to allocate really anywhere.

It is -no-longer- cropped to MEMBLOCK_REAL_LIMIT which disappears.

Note to archs: I'm leaving the default limit to MEMBLOCK_ALLOC_ANYWHERE. I
strongly recommend that you ensure that you set an appropriate limit
during boot in order to guarantee that an memblock_alloc() at any time
results in something that is accessible with a simple __va().

The reason is that a subsequent patch will introduce the ability for
the array to resize itself by reallocating itself. The MEMBLOCK core will
honor the current limit when performing those allocations.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

via following scripts

      FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

      sed -i \
        -e 's/lmb/memblock/g' \
        -e 's/LMB/MEMBLOCK/g' \
        $FILES

      for N in $(find . -name lmb.[ch]); do
        M=$(echo $N | sed 's/lmb/memblock/g')
        mv $N $M
      done

and remove some wrong change like lmbench and dlmb etc.

also move memblock.c from lib/ to mm/
Suggested-by: NIngo Molnar <mingo@elte.hu>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Irq stacks provide an essential protection from stack overflows through
external interrupts, at the cost of two additionals stacks per CPU.

Enable them unconditionally to simplify the kernel build and prevent
people from accidentally disabling them.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc initializes swiotlb before parsing the kernel boot options so
swiotlb options (e.g. specifying the swiotlb buffer size) are ignored.

Any time before freeing bootmem works for swiotlb so this patch moves
powerpc's swiotlb initialization after parsing the kernel boot
options, mem_init (as x86 does).
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: NBecky Bruce <beckyb@kernel.crashing.org>
Tested-by: NAlbert Herranz <albert_herranz@yahoo.es>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This enables us to avoid printing swiotlb memory info when we
initialize swiotlb. After swiotlb initialization, we could find
that we don't need swiotlb.

This patch removes the code to print swiotlb memory info in
swiotlb_init() and exports the function to do that.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: chrisw@sous-sol.org
Cc: dwmw2@infradead.org
Cc: joerg.roedel@amd.com
Cc: muli@il.ibm.com
Cc: tony.luck@intel.com
Cc: benh@kernel.crashing.org
LKML-Reference: <1257849980-22640-9-git-send-email-fujita.tomonori@lab.ntt.co.jp>
[ -v2: merge up conflict ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove the reliance on a staticly defined NVRAM size, allowing
platforms to support NVRAMs with sizes differing from the standard.

A fall back value is provided for platforms not supporting this extension.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Based on initial work from: Dale Farnsworth <dale@farnsworth.org>

Add the low level irq tracing hooks for 32-bit powerpc needed
to enable full lockdep functionality.

The approach taken to deal with the code in entry_32.S is that
we don't trace all the transitions of MSR:EE when we just turn
it off to peek at TI_FLAGS without races. Only when we are
calling into C code or returning from exceptions with a state
that have changed from what lockdep thinks.

There's a little bugger though: If we take an exception that
keeps interrupts enabled (such as an alignment exception) while
interrupts are enabled, we will call trace_hardirqs_on() on the
way back spurriously. Not a big deal, but to get rid of it would
require remembering in pt_regs that the exception was one of the
type that kept interrupts enabled which we don't know at this
stage. (Well, we could test all cases for regs->trap but that
sucks too much).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: NKumar Gala <galak@kernel.crashing.org>

This patch includes the basic infrastructure to use swiotlb
bounce buffering on 32-bit powerpc.  It is not yet enabled on
any platforms.  Probably the most interesting bit is the
addition of addr_needs_map to dma_ops - we need this as
a dma_op because the decision of whether or not an addr
can be mapped by a device is device-specific.
Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Wire up the trampoline code for ppc32 to relay exceptions from the
vectors at address 0 to vectors at address 32MB, and modify Kconfig
to enable Kdump support for all classic powerpcs.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This makes the MMU context code used for CPUs with no hash table
(except 603) dynamically allocate the various maps used to track
the state of contexts.

Only the main free map and CPU 0 stale map are allocated at boot
time.  Other CPU maps are allocated when those CPUs are brought up
and freed if they are unplugged.

This also moves the initialization of the MMU context management
slightly later during the boot process, which should be fine as
it's really only needed when userland if first started anyways.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We're soon running out of CPU features and I need to add some new
ones for various MMU related bits, so this patch separates the MMU
features from the CPU features.  I moved over the 32-bit MMU related
ones, added base features for MMU type families, but didn't move
over any 64-bit only feature yet.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

smp_hw_index isn't used on 64-bit, so move it from smp.c to
setup_32.c.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The `have_of' variable is a relic from the arch/ppc time, it isn't
useful nowadays.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The "phys" argument to machine_init() isn't used and isn't likely to
ever be so let's remove it.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The file arch/powerpc/kernel/sysfs.c is currently only compiled for
64-bit kernels.  It contain code to register CPU sysdevs in sysfs and
add various properties such as cache topology and raw access by root
to performance monitor counters (PMCs).  A lot of that can be re-used
as is on 32-bits.

This makes the file be built for both, with appropriate ifdef'ing
for the few bits that are really 64-bit specific, and adds some
support for the raw PMCs for 75x and 74xx processors.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch removes the old kgdb reminants from ARCH=powerpc and
implements the new style arch specific stub for the common kgdb core
interface.

It is possible to have xmon and kgdb in the same kernel, but you
cannot use both at the same time because there is only one set of
debug hooks.

The arch specific kgdb implementation saves the previous state of the
debug hooks and restores them if you unconfigure the kgdb I/O driver.
Kgdb should have no impact on a kernel that has no kgdb I/O driver
configured.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

To allow for a single kernel image on e500 v1/v2/mc we need to fixup lwsync
at runtime.  On e500v1/v2 lwsync causes an illop so we need to patch up
the code.  We default to 'sync' since that is always safe and if the cpu
is capable we will replace 'sync' with 'lwsync'.

We introduce CPU_FTR_LWSYNC as a way to determine at runtime if this is
needed.  This flag could be moved elsewhere since we dont really use it
for the normal CPU_FTR purpose.

Finally we only store the relative offset in the fixup section to keep it
as small as possible rather than using a full fixup_entry.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The e500 core enter DOZE/NAP power-saving modes when the core go to
cpu_idle routine.

The power management default running mode is DOZE, If the user

echo 1 > /proc/sys/kernel/powersave-nap

the system will change to NAP running mode.
Signed-off-by: NDave Liu <daveliu@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

For the additonal exception levels (critical, debug, machine check) on
40x/book-e we were using "static" allocations of the stack in the
associated head.S.

Move to a runtime allocation to make the code a bit easier to read as
we mimic how we handle IRQ stacks.  Its also a bit easier to setup the
stack with a "dummy" thread_info in C code.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NPaul Mackerras <paulus@samba.org>

This patch cleans up the ftrace code in PowerPC based on the comments from
Michael Ellerman.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: proski@gnu.org
Cc: a.p.zijlstra@chello.nl
Cc: Pekka Paalanen <pq@iki.fi>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linuxppc-dev@ozlabs.org
Cc: Soeren Sandmann Pedersen <sandmann@redhat.com>
Cc: paulus@samba.org
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds full support for ftrace for PowerPC (both 64 and 32 bit).
This includes dynamic tracing and function filtering.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This makes it possible to use separate stacks for hard and soft IRQs
on 32-bit powerpc as well as on 64-bit.  The code for 32-bit is just
the 32-bit analog of the 64-bit code.

* Added allocation and initialization of the irq stacks.  We limit the
  stacks to be in lowmem for ppc32.
* Implemented ppc32 versions of call_do_softirq() and call_handle_irq()
  to switch the stack pointers
* Reworked how we do stack overflow detection.  We now keep around the
  limit of the stack in the thread_struct and compare against the limit
  to see if we've overflowed.  We can now use this on ppc64 if desired.

[ paulus@samba.org: Fixed bug on 6xx where we need to reload r9 with the
  thread_info pointer. ]
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* Add special cases for pplus and prep to ide_default_{irq,io_base}()
  (+ FIXMEs about the need to use IDE platform host driver instead).

* Remove no longer needed ppc_ide_md and struct ide_machdep_calls.

* Then remove <linux/ide.h> include from:
  - arch/powerpc/kernel/setup_32.c
  - arch/ppc/kernel/ppc_ksyms.c
  - arch/ppc/kernel/setup.c
  - arch/ppc/platforms/pplus.c
  - arch/ppc/platforms/prep_setup.c

There should be no functional changes caused by this patch.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* PAGE_OFFSET is not always the start of code, use _stext instead.
* grab PAGE_SIZE and KERNELBASE from asm/page.h like ppc64 does.  Makes the
  code a bit more common and provide a single place to manipulate the
  defines for things like kdump.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Old-world powermacs don't set L2CR or L3CR on processor upgrade cards.
This simple patch allows the setting of L3CR via a kernel parameter
(like the existing kernel parameter to set L2CR).
Signed-off-by: NRobert Brose <bob@qbjnet.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>