提交 · 048a88595a66526f68636b51b1cdb5842bc0f28c · OpenHarmony / kernel_linux

20 9月, 2011 31 次提交
- B
  drm/nouveau: make general drm modesetting init common · 048a8859
  由 Ben Skeggs 提交于 7月 04, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  048a8859
- B
  drm/nvd0: add a card_type for 0xdX chipsets · 2e9733ff
  由 Ben Skeggs 提交于 7月 02, 2011
```
These are different enough from 0xcX to justify it, half fermi, half
kepler(??)..
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  2e9733ff
- M
  drm/nv04/pm: recalibrate timer on nvclk changes · f3f2f54e
  由 Martin Peres 提交于 7月 04, 2011
```
Signed-off-by: NMartin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  f3f2f54e
- B
  drm/nouveau/tmr: calibrate for ns timestamps on init · 591b06d7
  由 Ben Skeggs 提交于 7月 03, 2011
```
We previously assumed (incorrectly a lot of the time) that PTIMER would
be programmed at a frequency which'd give its 64-bit timestamps in
nanoseconds.

By programming PTIMER ourselves, we avoid this problem.
Reviewed-by: NMartin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  591b06d7
- B
  drm/nvc0/gr: unblacklist nvcf acceleration · 16cd399c
  由 Ben Skeggs 提交于 7月 02, 2011
```
Reported to be working.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  16cd399c
- B
  drm/nouveau: don't complain for disabled timingset entries · 0b3b5579
  由 Ben Skeggs 提交于 6月 29, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  0b3b5579
- B
  drm/nvc0/gr: copy GPC mpart config from PFFB · e425e0b3
  由 Ben Skeggs 提交于 6月 29, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  e425e0b3
- B
  drm/nvc0/vram: support non-uniform memory size per controller · aa650096
  由 Ben Skeggs 提交于 6月 24, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  aa650096
- B
  drm/nvc0/gr: add support for nvcf chipset · 3c23a7b8
  由 Ben Skeggs 提交于 6月 24, 2011
```
untested, written from a trace, accel disabled by default until it is
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  3c23a7b8
- B
  drm/nouveau: allow a nouveau_mm to be created with holes · a12036ba
  由 Ben Skeggs 提交于 6月 24, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  a12036ba
- B
  drm/nouveau: embed nouveau_mm · 987eec10
  由 Ben Skeggs 提交于 6月 24, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  987eec10
- B
  drm/nv31/mpeg: support for a single class3174 user · 52d07331
  由 Ben Skeggs 提交于 6月 23, 2011
```
Uncertain if/how the hw does multiple PMPEG channels, supporting one is
better than none however.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  52d07331
- B
  drm/nouveau: rename nv40_mpeg to nv31_mpeg · 323dcac5
  由 Ben Skeggs 提交于 6月 23, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  323dcac5
- B
  drm/nvc0/pm: more complete parsing of clock domains · 9698b9a6
  由 Ben Skeggs 提交于 6月 21, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  9698b9a6
- B
  drm/nvc0/pm: initial implementation of clocks_get() · 354d0781
  由 Ben Skeggs 提交于 6月 19, 2011
```
Not too certain on memory clock yet, but it gets the right numbers for
each perflvl on my NVC0.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  354d0781
- B
  drm/nva3/pm: idle graphics engine before changing clocks · d0f67a48
  由 Ben Skeggs 提交于 6月 18, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  d0f67a48
- B
  drm/nouveau: add function to wait until a callback returns true · 78e2933d
  由 Ben Skeggs 提交于 6月 18, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  78e2933d
- B
  drm/nv50/gr: insert set/clr of a ctxprog flag at start/end of ctxprog · 95f0de3a
  由 Ben Skeggs 提交于 6月 18, 2011
```
The set will be replaced with a wait on the same flag by a subsequent
commit in order to halt a ctxprog's execution temporarily.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  95f0de3a
- B
  drm/nva3/pm: tidy and add some comments here and there · cec2a270
  由 Ben Skeggs 提交于 6月 17, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  cec2a270
- B
  drm/nva3/pm: parse/reclock vdec/41a0 clocks · 4fd2847e
  由 Ben Skeggs 提交于 6月 17, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  4fd2847e
- B
  drm/nva3/pm: rewrite clock_set, and switch to new interfaces · ca94a71f
  由 Ben Skeggs 提交于 6月 17, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  ca94a71f
- B
  drm/nouveau/pm: add hooks to get/set *all* clocks at once · 77e7da68
  由 Ben Skeggs 提交于 6月 17, 2011
```
This is probably better than having to tell the common code about all the
clocks that exist on every chipset.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  77e7da68
- B
  drm/nva3/pm: rewrite clock readback functions, far more correct now · 3b0582d3
  由 Ben Skeggs 提交于 6月 17, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  3b0582d3
- B
  drm/nouveau/pm: some fermi chipsets still use volt 0x30 · 03ce8d9e
  由 Ben Skeggs 提交于 6月 10, 2011
```
Fun, fun.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  03ce8d9e
- B
  drm/nouveau/pm: allow voltage-only perflvl set, enable nvc0 · da1dc4cf
  由 Ben Skeggs 提交于 6月 10, 2011
```
Okay, my card didn't blow up.  Lets turn it on!
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  da1dc4cf
- B
  drm/nvc0/pm: enable voltage_get · 3c71c233
  由 Ben Skeggs 提交于 6月 09, 2011
```
I don't have a terribly good reason for not enabling voltage_set too, but,
lets wait and see.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  3c71c233
- B
  drm/nouveau/pm: show any info we can manage to glean on current perflvl · 93dccbed
  由 Ben Skeggs 提交于 6月 09, 2011
```
Previously wouldn't show detected voltage if we couldn't figure out the
clock frequencies..
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  93dccbed
- B
  drm/nouveau/pm: add support for parsing perflvl voltage on fermi chips · 3b5565dd
  由 Ben Skeggs 提交于 6月 09, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  3b5565dd
- B
  drm/nouveau/pm: add yet another vid gpio tag · a31214ef
  由 Ben Skeggs 提交于 6月 09, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  a31214ef
- B
  drm/nouveau/pm: initial attempt at parsing volt 0x40 · f60dfb99
  由 Ben Skeggs 提交于 6月 09, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  f60dfb99
- B
  drm/nouveau/pm: store voltage in microvolts · c3450239
  由 Ben Skeggs 提交于 6月 09, 2011
```
Instead of 10s of millivolts, to match fermi vbios.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
  c3450239
09 9月, 2011 5 次提交

drm/nv04/crtc: Bail out if FB is not bound to crtc · 0e83bb4e

由 Emil Velikov 提交于 8月 25, 2011

This commit resolves a possible 'NULL pointer dereference'
It uses the same approach as radeon, intel and nouveau/nv50

Fixes bug 'Nouveau: Kernel oops when unplugging external monitor'
https://bugs.freedesktop.org/show_bug.cgi?id=40336Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

0e83bb4e

drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs · 1bf27066

由 Marcin Slusarz 提交于 8月 22, 2011

nv04_sgdma_bind binds the same page multiple times on
architectures where PAGE_SIZE != 4096.
Let's fix it.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

1bf27066

drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate · 17c8b960

由 Marcin Slusarz 提交于 8月 22, 2011

Not cleaning after alloc failure would result in crash on destroy,
because nouveau_sgdma_clear assumes "ttm_alloced" to be not null when
"pages" is not null.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

17c8b960

B
drm/nouveau: fix oops on pre-semaphore hardware · cfd8be08
由 Ben Skeggs 提交于 8月 23, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
cfd8be08

drm/nv50/crtc: Bail out if FB is not bound to crtc · ffbc559b

由 Emil Velikov 提交于 8月 21, 2011

Fixes possbile NULL pointer dereference
Resolves 'kernel crash in nv50_crtc_do_mode_set_base during shutdown'
https://bugs.freedesktop.org/show_bug.cgi?id=40005Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

ffbc559b

25 7月, 2011 4 次提交

B
drm/nouveau/gr: disable fifo access and idle before suspend ctx unload · 9962cc6e
由 Ben Skeggs 提交于 7月 20, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
9962cc6e

drm/nouveau: pass flag to engine fini() method on suspend · 6c320fef

由 Ben Skeggs 提交于 7月 20, 2011

It may not be necessary to fail in certain cases (such as failing to idle)
on module unload, whereas on suspend it's important to ensure a consistent
state can be restored on resume.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

6c320fef

B
drm/nouveau: replace nv04_graph_fifo_access() use with direct reg bashing · 70ad25ab
由 Ben Skeggs 提交于 7月 20, 2011
```
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
```
70ad25ab

drm/nv40/gr: rewrite/split context takedown functions · 12a30e26

由 Ben Skeggs 提交于 7月 18, 2011

It's completely pointless to save the PGRAPH context when destroying a
channel, so don't bother.

This commit should also fix kernel.org bug 39422, where the DRM channel
state was incorrectly being saved because we left PGRAPH FIFO access
enabled while running the ctxprog.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

12a30e26

OpenHarmony / kernel_linux 上一次同步 4 年多

OpenHarmony / kernel_linux
上一次同步 4 年多