mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM

When erased subpages are read then the BCH decoder returns STATUS_ERASED
if they are all empty, or STATUS_UNCORRECTABLE if there are bitflips.
When there are bitflips, we have to set these bits again to show the
upper layers a completely erased page. When a bitflip happens in the
exact byte where the bad block marker is, then this byte is swapped
with another byte in block_mark_swapping(). The correction code then
detects a bitflip in another subpage and no longer corrects the bitflip
where it really happens.

Correct this behaviour by calling block_mark_swapping() after the
bitflips have been corrected.

In our case UBIFS failed with this bug because it expects erased
pages to be really empty:

UBIFS error (pid 187): ubifs_scan: corrupt empty space at LEB 36:118735
UBIFS error (pid 187): ubifs_scanned_corruption: corruption at LEB 36:118735
UBIFS error (pid 187): ubifs_scanned_corruption: first 8192 bytes from LEB 36:118735
UBIFS error (pid 187): ubifs_scan: LEB 36 scanning failed
UBIFS error (pid 187): do_commit: commit failed, error -117
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: NRichard Weinberger <richard@nod.at>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

drivers/mtd/nand/gpmi-nand/gpmi-nand.c

@@ -1067,9 +1067,6 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 		return ret;
 	}
 
-	/* handle the block mark swapping */
-	block_mark_swapping(this, payload_virt, auxiliary_virt);
-
 	/* Loop over status bytes, accumulating ECC status. */
 	status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
 
@@ -1158,6 +1155,9 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 		max_bitflips = max_t(unsigned int, max_bitflips, *status);
 	}
 
+	/* handle the block mark swapping */
+	block_mark_swapping(this, buf, auxiliary_virt);
+
 	if (oob_required) {
 		/*
 		 * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob()