[PATCH] Base support for AMD Geode GX/LX processors

Provide basic support for the AMD Geode GX and LX processors.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

MAINTAINERS

@@ -258,6 +258,13 @@ P:	Ivan Kokshaysky
 M:	ink@jurassic.park.msu.ru
 S:	Maintained for 2.4; PCI support for 2.6.
 
+AMD GEODE PROCESSOR/CHIPSET SUPPORT
+P:      Jordan Crouse
+M:      info-linux@geode.amd.com
+L:	info-linux@geode.amd.com
+W:	http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
+S:	Supported
+
 APM DRIVER
 P:	Stephen Rothwell
 M:	sfr@canb.auug.org.au

arch/i386/Kconfig.cpu

@@ -39,6 +39,7 @@ config M386
 	  - "Winchip-2" for IDT Winchip 2.
 	  - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
 	  - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
+	  - "Geode GX/LX" For AMD Geode GX and LX processors.
 	  - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
 	  - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
 
@@ -171,6 +172,11 @@ config MGEODEGX1
 	help
 	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
 
+config MGEODE_LX
+       bool "Geode GX/LX"
+       help
+         Select this for AMD Geode GX and LX processors.
+
 config MCYRIXIII
 	bool "CyrixIII/VIA-C3"
 	help
@@ -220,8 +226,8 @@ config X86_XADD
 config X86_L1_CACHE_SHIFT
 	int
 	default "7" if MPENTIUM4 || X86_GENERIC
-	default "4" if X86_ELAN || M486 || M386
-	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1
+	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
+	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
 	default "6" if MK7 || MK8 || MPENTIUMM
 
 config RWSEM_GENERIC_SPINLOCK
@@ -290,12 +296,12 @@ config X86_INTEL_USERCOPY
 
 config X86_USE_PPRO_CHECKSUM
 	bool
-	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
+	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX
 	default y
 
 config X86_USE_3DNOW
 	bool
-	depends on MCYRIXIII || MK7
+	depends on MCYRIXIII || MK7 || MGEODE_LX
 	default y
 
 config X86_OOSTORE

arch/i386/kernel/cpu/amd.c

@@ -161,8 +161,13 @@ static void __init init_amd(struct cpuinfo_x86 *c)
 					set_bit(X86_FEATURE_K6_MTRR, c->x86_capability);
 				break;
 			}
-			break;
 
+			if (c->x86_model == 10) {
+				/* AMD Geode LX is model 10 */
+				/* placeholder for any needed mods */
+				break;
+			}
+			break;
 		case 6: /* An Athlon/Duron */
  
 			/* Bit 15 of Athlon specific MSR 15, needs to be 0

arch/i386/kernel/cpu/cyrix.c

@@ -342,6 +342,31 @@ static void __init init_cyrix(struct cpuinfo_x86 *c)
 	return;
 }
 
+/*
+ * Handle National Semiconductor branded processors
+ */
+static void __devinit init_nsc(struct cpuinfo_x86 *c)
+{
+	/* There may be GX1 processors in the wild that are branded
+	 * NSC and not Cyrix.
+	 *
+	 * This function only handles the GX processor, and kicks every
+	 * thing else to the Cyrix init function above - that should
+	 * cover any processors that might have been branded differently
+	 * after NSC aquired Cyrix.
+	 *
+	 * If this breaks your GX1 horribly, please e-mail
+	 * info-linux@ldcmail.amd.com to tell us.
+	 */
+
+	/* Handle the GX (Formally known as the GX2) */
+
+	if (c->x86 == 5 && c->x86_model == 5)
+		display_cacheinfo(c);
+	else
+		init_cyrix(c);
+}
+
 /*
  * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected
  * by the fact that they preserve the flags across the division of 5/2.
@@ -422,7 +447,7 @@ int __init cyrix_init_cpu(void)
 static struct cpu_dev nsc_cpu_dev __initdata = {
 	.c_vendor	= "NSC",
 	.c_ident 	= { "Geode by NSC" },
-	.c_init		= init_cyrix,
+	.c_init		= init_nsc,
 	.c_identify	= generic_identify,
 };
 

include/asm-i386/module.h

@@ -52,8 +52,10 @@ struct mod_arch_specific
 #define MODULE_PROC_FAMILY "CYRIXIII "
 #elif defined CONFIG_MVIAC3_2
 #define MODULE_PROC_FAMILY "VIAC3-2 "
-#elif CONFIG_MGEODEGX1
+#elif defined CONFIG_MGEODEGX1
 #define MODULE_PROC_FAMILY "GEODEGX1 "
+#elif defined CONFIG_MGEODE_LX
+#define MODULE_PROC_FAMILY "GEODE "
 #else
 #error unknown processor family
 #endif

include/linux/pci_ids.h

@@ -394,6 +394,13 @@
 #define PCI_DEVICE_ID_NS_87410		0xd001
 #define PCI_DEVICE_ID_NS_CS5535_IDE	0x002d
 
+#define PCI_DEVICE_ID_NS_CS5535_HOST_BRIDGE  0x0028
+#define PCI_DEVICE_ID_NS_CS5535_ISA_BRIDGE   0x002b
+#define PCI_DEVICE_ID_NS_CS5535_IDE          0x002d
+#define PCI_DEVICE_ID_NS_CS5535_AUDIO        0x002e
+#define PCI_DEVICE_ID_NS_CS5535_USB          0x002f
+#define PCI_DEVICE_ID_NS_CS5535_VIDEO        0x0030
+
 #define PCI_VENDOR_ID_TSENG		0x100c
 #define PCI_DEVICE_ID_TSENG_W32P_2	0x3202
 #define PCI_DEVICE_ID_TSENG_W32P_b	0x3205
@@ -496,6 +503,9 @@
 
 #define PCI_DEVICE_ID_AMD_CS5536_IDE	0x209A
 
+#define PCI_DEVICE_ID_AMD_LX_VIDEO  0x2081
+#define PCI_DEVICE_ID_AMD_LX_AES    0x2082
+
 #define PCI_VENDOR_ID_TRIDENT		0x1023
 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX	0x2000
 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX	0x2001