Merge tag 'clk-for-linus-20151104' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd: "The majority of the changes are driver updates and new device support. The core framework is mostly unchanged this time around, with only a couple patches to expose a clk provider API and make getting clk parent names from DT more robust. Driver updates: - Support for clock controllers found on Broadcom Northstar SoCs and bcm2835 SoC - Support for Allwinner audio clocks - A few cleanup patches for Tegra drivers and support for the highest DFLL frequencies on Tegra124 - Samsung exynos7 fixes and improvements - i.Mx SoC updates to add a few missing clocks and keep debug uart clocks on during kernel intialization - Some mediatek cleanups and support for more subsystem clocks - Support for msm8916 gpu/audio clocks and qcom's GDSC power domain controllers - A new driver for the Silabs si514 clock chip" * tag 'clk-for-linus-20151104' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (143 commits) clk: qcom: msm8960: Fix dsi1/2 halt bits clk: lpc18xx-cgu: fix potential system hang when disabling unused clocks clk: lpc18xx-ccu: fix potential system hang when disabling unused clocks clk: Add clk_hw_is_enabled() for use by clk providers clk: Add stubs for of_clk_*() APIs when CONFIG_OF=n clk: versatile-icst: fix memory leak clk: Remove clk_{register,unregister}_multiplier() clk: iproc: define Broadcom NS2 iProc clock binding clk: iproc: define Broadcom NSP iProc clock binding clk: ns2: add clock support for Broadcom Northstar 2 SoC clk: iproc: Separate status and control variables clk: iproc: Split off dig_filter clk: iproc: Add PLL base write function clk: nsp: add clock support for Broadcom Northstar Plus SoC clk: iproc: Add PWRCTRL support clk: cygnus: Convert all macros to all caps ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled clk: imx31: add missing of_node_put clk: imx27: add missing of_node_put clk: si5351: add missing of_node_put ...

Merge tag 'clk-for-linus-20151104' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "The majority of the changes are driver updates and new device support. The core framework is mostly unchanged this time around, with only a couple patches to expose a clk provider API and make getting clk parent names from DT more robust. Driver updates: - Support for clock controllers found on Broadcom Northstar SoCs and bcm2835 SoC - Support for Allwinner audio clocks - A few cleanup patches for Tegra drivers and support for the highest DFLL frequencies on Tegra124 - Samsung exynos7 fixes and improvements - i.Mx SoC updates to add a few missing clocks and keep debug uart clocks on during kernel intialization - Some mediatek cleanups and support for more subsystem clocks - Support for msm8916 gpu/audio clocks and qcom's GDSC power domain controllers - A new driver for the Silabs si514 clock chip" * tag 'clk-for-linus-20151104' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (143 commits) clk: qcom: msm8960: Fix dsi1/2 halt bits clk: lpc18xx-cgu: fix potential system hang when disabling unused clocks clk: lpc18xx-ccu: fix potential system hang when disabling unused clocks clk: Add clk_hw_is_enabled() for use by clk providers clk: Add stubs for of_clk_*() APIs when CONFIG_OF=n clk: versatile-icst: fix memory leak clk: Remove clk_{register,unregister}_multiplier() clk: iproc: define Broadcom NS2 iProc clock binding clk: iproc: define Broadcom NSP iProc clock binding clk: ns2: add clock support for Broadcom Northstar 2 SoC clk: iproc: Separate status and control variables clk: iproc: Split off dig_filter clk: iproc: Add PLL base write function clk: nsp: add clock support for Broadcom Northstar Plus SoC clk: iproc: Add PWRCTRL support clk: cygnus: Convert all macros to all caps ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled clk: imx31: add missing of_node_put clk: imx27: add missing of_node_put clk: si5351: add missing of_node_put ...
f66477a0 · Linus Torvalds · 400c5bd5 · e5bf1991 · f66477a0 · f66477a0
143 changed file
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
+Mediatek imgsys controller
+============================
+
+The Mediatek imgsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt8173-imgsys", "syscon"
+- #clock-cells: Must be 1
+
+The imgsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+imgsys: clock-controller@15000000 {
+	compatible = "mediatek,mt8173-imgsys", "syscon";
+	reg = <0 0x15000000 0 0x1000>;
+	#clock-cells = <1>;
+};
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
+Mediatek mmsys controller
+============================
+
+The Mediatek mmsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt8173-mmsys", "syscon"
+- #clock-cells: Must be 1
+
+The mmsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+mmsys: clock-controller@14000000 {
+	compatible = "mediatek,mt8173-mmsys", "syscon";
+	reg = <0 0x14000000 0 0x1000>;
+	#clock-cells = <1>;
+};
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
+Mediatek vdecsys controller
+============================
+
+The Mediatek vdecsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt8173-vdecsys", "syscon"
+- #clock-cells: Must be 1
+
+The vdecsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+vdecsys: clock-controller@16000000 {
+	compatible = "mediatek,mt8173-vdecsys", "syscon";
+	reg = <0 0x16000000 0 0x1000>;
+	#clock-cells = <1>;
+};
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
+Mediatek vencltsys controller
+============================
+
+The Mediatek vencltsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt8173-vencltsys", "syscon"
+- #clock-cells: Must be 1
+
+The vencltsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+vencltsys: clock-controller@19000000 {
+	compatible = "mediatek,mt8173-vencltsys", "syscon";
+	reg = <0 0x19000000 0 0x1000>;
+	#clock-cells = <1>;
+};
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
+Mediatek vencsys controller
+============================
+
+The Mediatek vencsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt8173-vencsys", "syscon"
+- #clock-cells: Must be 1
+
+The vencsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+vencsys: clock-controller@18000000 {
+	compatible = "mediatek,mt8173-vencsys", "syscon";
+	reg = <0 0x18000000 0 0x1000>;
+	#clock-cells = <1>;
+};
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -77,6 +77,9 @@ Required properties:
 	"atmel,sama5d4-clk-h32mx":
 		at91 h32mx clock

+	"atmel,sama5d2-clk-generated":
+		at91 generated clock
+
 Required properties for SCKC node:
 - reg : defines the IO memory reserved for the SCKC.
 - #size-cells : shall be 0 (reg is used to encode clk id).
@@ -461,3 +464,35 @@ For example:
 		compatible = "atmel,sama5d4-clk-h32mx";
 		clocks = <&mck>;
 	};
+
+Required properties for generated clocks:
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+- clocks : shall be the generated clock source phandles.
+	e.g. clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
+- name: device tree node describing a specific generated clock.
+	* #clock-cells : from common clock binding; shall be set to 0.
+	* reg: peripheral id. See Atmel's datasheets to get a full
+	  list of peripheral ids.
+	* atmel,clk-output-range : minimum and maximum clock frequency
+	  (two u32 fields).
+
+For example:
+	gck {
+		compatible = "atmel,sama5d2-clk-generated";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
+
+		tcb0_gclk: tcb0_gclk {
+			#clock-cells = <0>;
+			reg = <35>;
+			atmel,clk-output-range = <0 83000000>;
+		};
+
+		pwm_gclk: pwm_gclk {
+			#clock-cells = <0>;
+			reg = <38>;
+			atmel,clk-output-range = <0 83000000>;
+		};
+	};
--- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
+Broadcom BCM2835 CPRMAN clocks
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CPRMAN clock controller generates clocks in the audio power domain
+of the BCM2835.  There is a level of PLLs deriving from an external
+oscillator, a level of PLL dividers that produce channels off of the
+few PLLs, and a level of mostly-generic clock generators sourcing from
+the PLL channels.  Most other hardware components source from the
+clock generators, but a few (like the ARM or HDMI) will source from
+the PLL dividers directly.
+
+Required properties:
+- compatible:	Should be "brcm,bcm2835-cprman"
+- #clock-cells:	Should be <1>. The permitted clock-specifier values can be
+		  found in include/dt-bindings/clock/bcm2835.h
+- reg:		Specifies base physical address and size of the registers
+- clocks:	The external oscillator clock phandle
+
+Example:
+
+	clk_osc: clock@3 {
+		compatible = "fixed-clock";
+		reg = <3>;
+		#clock-cells = <0>;
+		clock-output-names = "osc";
+		clock-frequency = <19200000>;
+	};
+
+	clocks: cprman@7e101000 {
+		compatible = "brcm,bcm2835-cprman";
+		#clock-cells = <1>;
+		reg = <0x7e101000 0x2000>;
+		clocks = <&clk_osc>;
+	};
+
+	i2c0: i2c@7e205000 {
+		compatible = "brcm,bcm2835-i2c";
+		reg = <0x7e205000 0x1000>;
+		interrupts = <2 21>;
+		clocks = <&clocks BCM2835_CLOCK_VPU>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -130,3 +130,81 @@ These clock IDs are defined in:
    ch3_unused mipipll          4       BCM_CYGNUS_MIPIPLL_CH3_UNUSED
    ch4_unused mipipll          5       BCM_CYGNUS_MIPIPLL_CH4_UNUSED
    ch5_unused mipipll          6       BCM_CYGNUS_MIPIPLL_CH5_UNUSED
+
+Northstar and Northstar Plus
+------
+PLL and leaf clock compatible strings for Northstar and Northstar Plus are:
+ "brcm,nsp-armpll"
+ "brcm,nsp-genpll"
+ "brcm,nsp-lcpll0"
+
+The following table defines the set of PLL/clock index and ID for Northstar and
+Northstar Plus.  These clock IDs are defined in:
+    "include/dt-bindings/clock/bcm-nsp.h"
+
+    Clock	Source		Index	ID
+    ---		-----		-----	---------
+    crystal	N/A		N/A	N/A
+
+    armpll	crystal		N/A	N/A
+
+    genpll	crystal		0	BCM_NSP_GENPLL
+    phy		genpll		1	BCM_NSP_GENPLL_PHY_CLK
+    ethernetclk	genpll		2	BCM_NSP_GENPLL_ENET_SW_CLK
+    usbclk	genpll		3	BCM_NSP_GENPLL_USB_PHY_REF_CLK
+    iprocfast	genpll		4	BCM_NSP_GENPLL_IPROCFAST_CLK
+    sata1	genpll		5	BCM_NSP_GENPLL_SATA1_CLK
+    sata2	genpll		6	BCM_NSP_GENPLL_SATA2_CLK
+
+    lcpll0	crystal		0	BCM_NSP_LCPLL0
+    pcie_phy	lcpll0		1	BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
+    sdio	lcpll0		2	BCM_NSP_LCPLL0_SDIO_CLK
+    ddr_phy	lcpll0		3	BCM_NSP_LCPLL0_DDR_PHY_CLK
+
+Northstar 2
+-----------
+PLL and leaf clock compatible strings for Northstar 2 are:
+    "brcm,ns2-genpll-scr"
+    "brcm,ns2-genpll-sw"
+    "brcm,ns2-lcpll-ddr"
+    "brcm,ns2-lcpll-ports"
+
+The following table defines the set of PLL/clock index and ID for Northstar 2.
+These clock IDs are defined in:
+    "include/dt-bindings/clock/bcm-ns2.h"
+
+    Clock	Source		Index	ID
+    ---		-----		-----	---------
+    crystal	N/A		N/A	N/A
+
+    genpll_scr	crystal		0	BCM_NS2_GENPLL_SCR
+    scr		genpll_scr	1	BCM_NS2_GENPLL_SCR_SCR_CLK
+    fs		genpll_scr	2	BCM_NS2_GENPLL_SCR_FS_CLK
+    audio_ref	genpll_scr	3	BCM_NS2_GENPLL_SCR_AUDIO_CLK
+    ch3_unused	genpll_scr	4	BCM_NS2_GENPLL_SCR_CH3_UNUSED
+    ch4_unused	genpll_scr	5	BCM_NS2_GENPLL_SCR_CH4_UNUSED
+    ch5_unused	genpll_scr	6	BCM_NS2_GENPLL_SCR_CH5_UNUSED
+
+    genpll_sw	crystal		0	BCM_NS2_GENPLL_SW
+    rpe		genpll_sw	1	BCM_NS2_GENPLL_SW_RPE_CLK
+    250		genpll_sw	2	BCM_NS2_GENPLL_SW_250_CLK
+    nic		genpll_sw	3	BCM_NS2_GENPLL_SW_NIC_CLK
+    chimp	genpll_sw	4	BCM_NS2_GENPLL_SW_CHIMP_CLK
+    port	genpll_sw	5	BCM_NS2_GENPLL_SW_PORT_CLK
+    sdio	genpll_sw	6	BCM_NS2_GENPLL_SW_SDIO_CLK
+
+    lcpll_ddr	crystal		0	BCM_NS2_LCPLL_DDR
+    pcie_sata_usb lcpll_ddr	1	BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
+    ddr		lcpll_ddr	2	BCM_NS2_LCPLL_DDR_DDR_CLK
+    ch2_unused	lcpll_ddr	3	BCM_NS2_LCPLL_DDR_CH2_UNUSED
+    ch3_unused	lcpll_ddr	4	BCM_NS2_LCPLL_DDR_CH3_UNUSED
+    ch4_unused	lcpll_ddr	5	BCM_NS2_LCPLL_DDR_CH4_UNUSED
+    ch5_unused	lcpll_ddr	6	BCM_NS2_LCPLL_DDR_CH5_UNUSED
+
+    lcpll_ports	crystal		0	BCM_NS2_LCPLL_PORTS
+    wan		lcpll_ports	1	BCM_NS2_LCPLL_PORTS_WAN_CLK
+    rgmii	lcpll_ports	2	BCM_NS2_LCPLL_PORTS_RGMII_CLK
+    ch2_unused	lcpll_ports	3	BCM_NS2_LCPLL_PORTS_CH2_UNUSED
+    ch3_unused	lcpll_ports	4	BCM_NS2_LCPLL_PORTS_CH3_UNUSED
+    ch4_unused	lcpll_ports	5	BCM_NS2_LCPLL_PORTS_CH4_UNUSED
+    ch5_unused	lcpll_ports	6	BCM_NS2_LCPLL_PORTS_CH5_UNUSED
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
 * Renesas CPG DIV6 Clock

 The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse
-Generator (CPG). They clock input is divided by a configurable factor from 1
+Generator (CPG). Their clock input is divided by a configurable factor from 1
 to 64.

 Required Properties:

--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+* Renesas Clock Pulse Generator / Module Standby and Software Reset
+
+On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator)
+and MSSR (Module Standby and Software Reset) blocks are intimately connected,
+and share the same register block.
+
+They provide the following functionalities:
+  - The CPG block generates various core clocks,
+  - The MSSR block provides two functions:
+      1. Module Standby, providing a Clock Domain to control the clock supply
+	 to individual SoC devices,
+      2. Reset Control, to perform a software reset of individual SoC devices.
+
+Required Properties:
+  - compatible: Must be one of:
+      - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC
+
+  - reg: Base address and length of the memory resource used by the CPG/MSSR
+    block
+
+  - clocks: References to external parent clocks, one entry for each entry in
+    clock-names
+  - clock-names: List of external parent clock names. Valid names are:
+      - "extal" (r8a7795)
+      - "extalr" (r8a7795)
+
+  - #clock-cells: Must be 2
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+	and a core clock reference, as defined in
+	<dt-bindings/clock/*-cpg-mssr.h>.
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+	a module number, as defined in the datasheet.
+
+  - #power-domain-cells: Must be 0
+      - SoC devices that are part of the CPG/MSSR Clock Domain and can be
+	power-managed through Module Standby should refer to the CPG device
+	node in their "power-domains" property, as documented by the generic PM
+	Domain bindings in
+	Documentation/devicetree/bindings/power/power_domain.txt.
+
+
+Examples
+--------
+
+  - CPG device node:
+
+	cpg: clock-controller@e6150000 {
+		compatible = "renesas,r8a7795-cpg-mssr";
+		reg = <0 0xe6150000 0 0x1000>;
+		clocks = <&extal_clk>, <&extalr_clk>;
+		clock-names = "extal", "extalr";
+		#clock-cells = <2>;
+		#power-domain-cells = <0>;
+	};
+
+
+  - CPG/MSSR Clock Domain member device node:
+
+	scif2: serial@e6e88000 {
+		compatible = "renesas,scif-r8a7795", "renesas,scif";
+		reg = <0 0xe6e88000 0 64>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 310>;
+		clock-names = "sci_ick";
+		dmas = <&dmac1 0x13>, <&dmac1 0x12>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg>;
+		status = "disabled";
+	};
--- a/Documentation/devicetree/bindings/clock/silabs,si514.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si514.txt
+Binding for Silicon Labs 514 programmable I2C clock generator.
+
+Reference
+This binding uses the common clock binding[1]. Details about the device can be
+found in the datasheet[2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si514 datasheet
+    http://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
+
+Required properties:
+ - compatible: Shall be "silabs,si514"
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si514".
+
+Example:
+	si514: clock-generator@55 {
+		reg = <0x55>;
+		#clock-cells = <0>;
+		compatible = "silabs,si514";
+	};
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -23,6 +23,7 @@ Required properties:
 	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
 	"sst,plls-c32-cx_0",		"st,clkgen-plls-c32"
 	"sst,plls-c32-cx_1",		"st,clkgen-plls-c32"
+	"st,stih418-plls-c28-a9",	"st,clkgen-plls-c32"

 	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"

--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -102,6 +102,9 @@ config HAVE_AT91_SMD
 config HAVE_AT91_H32MX
 	bool

+config HAVE_AT91_GENERATED_CLK
+	bool
+
 config SOC_SAM_V4_V5
 	bool


--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -14,7 +14,7 @@ config ARCH_BCM_IPROC
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select ARM_GLOBAL_TIMER
-
+	select COMMON_CLK_IPROC
 	select CLKSRC_MMIO
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA

--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1353,6 +1353,7 @@ int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,

 	return ret;
 }
+EXPORT_SYMBOL_GPL(pm_genpd_add_subdomain);

 /**
 * pm_genpd_remove_subdomain - Remove a subdomain from an I/O PM domain.
@@ -1400,6 +1401,7 @@ int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,

 	return ret;
 }
+EXPORT_SYMBOL_GPL(pm_genpd_remove_subdomain);

 /* Default device callbacks for generic PM domains. */


--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -14,6 +14,7 @@ config COMMON_CLK
 	select HAVE_CLK_PREPARE
 	select CLKDEV_LOOKUP
 	select SRCU
+	select RATIONAL
 	---help---
 	  The common clock framework is a single definition of struct
 	  clk, useful across many platforms, as well as an
@@ -68,6 +69,16 @@ config COMMON_CLK_SI5351
 	  This driver supports Silicon Labs 5351A/B/C programmable clock
 	  generators.

+config COMMON_CLK_SI514
+	tristate "Clock driver for SiLabs 514 devices"
+	depends on I2C
+	depends on OF
+	select REGMAP_I2C
+	help
+	---help---
+	  This driver supports the Silicon Labs 514 programmable clock
+	  generator.
+
 config COMMON_CLK_SI570
 	tristate "Clock driver for SiLabs 570 and compatible devices"
 	depends on I2C
@@ -113,7 +124,7 @@ config CLK_TWL6040

 config COMMON_CLK_AXI_CLKGEN
 	tristate "AXI clkgen driver"
-	depends on ARCH_ZYNQ || MICROBLAZE
+	depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
 	help
 	---help---
 	  Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
@@ -121,7 +132,7 @@ config COMMON_CLK_AXI_CLKGEN

 config CLK_QORIQ
 	bool "Clock driver for Freescale QorIQ platforms"
-	depends on (PPC_E500MC || ARM) && OF
+	depends on (PPC_E500MC || ARM || COMPILE_TEST) && OF
 	---help---
 	  This adds the clock driver support for Freescale QorIQ platforms
 	  using common clock framework.
@@ -129,13 +140,13 @@ config CLK_QORIQ
 config COMMON_CLK_XGENE
 	bool "Clock driver for APM XGene SoC"
 	default y
-	depends on ARM64
+	depends on ARM64 || COMPILE_TEST
 	---help---
 	  Sypport for the APM X-Gene SoC reference, PLL, and device clocks.

 config COMMON_CLK_KEYSTONE
 	tristate "Clock drivers for Keystone based SOCs"
-	depends on ARCH_KEYSTONE && OF
+	depends on (ARCH_KEYSTONE || COMPILE_TEST) && OF
 	---help---
          Supports clock drivers for Keystone based SOCs. These SOCs have local
 	  a power sleep control module that gate the clock to the IPs and PLLs.

--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_COMMON_CLK)	+= clk-divider.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-factor.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-rate.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-gate.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-multiplier.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-mux.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-fractional-divider.o
@@ -19,7 +20,6 @@ endif
 obj-$(CONFIG_MACH_ASM9260)		+= clk-asm9260.o
 obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o
 obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o
-obj-$(CONFIG_ARCH_BCM2835)		+= clk-bcm2835.o
 obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
@@ -37,6 +37,7 @@ obj-$(CONFIG_CLK_QORIQ)			+= clk-qoriq.o
 obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o
 obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o
 obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o
+obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o
 obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o
 obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_STM32)		+= clk-stm32f4.o
@@ -47,7 +48,7 @@ obj-$(CONFIG_COMMON_CLK_WM831X)		+= clk-wm831x.o
 obj-$(CONFIG_COMMON_CLK_XGENE)		+= clk-xgene.o
 obj-$(CONFIG_COMMON_CLK_PWM)		+= clk-pwm.o
 obj-$(CONFIG_COMMON_CLK_AT91)		+= at91/
-obj-$(CONFIG_ARCH_BCM)			+= bcm/
+obj-y					+= bcm/
 obj-$(CONFIG_ARCH_BERLIN)		+= berlin/
 obj-$(CONFIG_ARCH_HISI)			+= hisilicon/
 obj-$(CONFIG_ARCH_MXC)			+= imx/

--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_HAVE_AT91_UTMI)		+= clk-utmi.o
 obj-$(CONFIG_HAVE_AT91_USB_CLK)		+= clk-usb.o
 obj-$(CONFIG_HAVE_AT91_SMD)		+= clk-smd.o
 obj-$(CONFIG_HAVE_AT91_H32MX)		+= clk-h32mx.o
+obj-$(CONFIG_HAVE_AT91_GENERATED_CLK)	+= clk-generated.o
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
+/*
+ *  Copyright (C) 2015 Atmel Corporation,
+ *                     Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Based on clk-programmable & clk-peripheral drivers by Boris BREZILLON.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include "pmc.h"
+
+#define PERIPHERAL_MAX		64
+#define PERIPHERAL_ID_MIN	2
+
+#define GENERATED_SOURCE_MAX	6
+#define GENERATED_MAX_DIV	255
+
+struct clk_generated {
+	struct clk_hw hw;
+	struct at91_pmc *pmc;
+	struct clk_range range;
+	u32 id;
+	u32 gckdiv;
+	u8 parent_id;
+};
+
+#define to_clk_generated(hw) \
+	container_of(hw, struct clk_generated, hw)
+
+static int clk_generated_enable(struct clk_hw *hw)
+{
+	struct clk_generated *gck = to_clk_generated(hw);
+	struct at91_pmc *pmc = gck->pmc;
+	u32 tmp;
+
+	pr_debug("GCLK: %s, gckdiv = %d, parent id = %d\n",
+		 __func__, gck->gckdiv, gck->parent_id);
+
+	pmc_lock(pmc);
+	pmc_write(pmc, AT91_PMC_PCR, (gck->id & AT91_PMC_PCR_PID_MASK));
+	tmp = pmc_read(pmc, AT91_PMC_PCR) &
+			~(AT91_PMC_PCR_GCKDIV_MASK | AT91_PMC_PCR_GCKCSS_MASK);
+	pmc_write(pmc, AT91_PMC_PCR, tmp | AT91_PMC_PCR_GCKCSS(gck->parent_id)
+					 | AT91_PMC_PCR_CMD
+					 | AT91_PMC_PCR_GCKDIV(gck->gckdiv)
+					 | AT91_PMC_PCR_GCKEN);
+	pmc_unlock(pmc);
+	return 0;
+}
+
+static void clk_generated_disable(struct clk_hw *hw)
+{
+	struct clk_generated *gck = to_clk_generated(hw);
+	struct at91_pmc *pmc = gck->pmc;
+	u32 tmp;
+
+	pmc_lock(pmc);
+	pmc_write(pmc, AT91_PMC_PCR, (gck->id & AT91_PMC_PCR_PID_MASK));
+	tmp = pmc_read(pmc, AT91_PMC_PCR) & ~AT91_PMC_PCR_GCKEN;
+	pmc_write(pmc, AT91_PMC_PCR, tmp | AT91_PMC_PCR_CMD);
+	pmc_unlock(pmc);
+}
+
+static int clk_generated_is_enabled(struct clk_hw *hw)
+{
+	struct clk_generated *gck = to_clk_generated(hw);
+	struct at91_pmc *pmc = gck->pmc;
+	int ret;
+
+	pmc_lock(pmc);
+	pmc_write(pmc, AT91_PMC_PCR, (gck->id & AT91_PMC_PCR_PID_MASK));
+	ret = !!(pmc_read(pmc, AT91_PMC_PCR) & AT91_PMC_PCR_GCKEN);
+	pmc_unlock(pmc);
+
+	return ret;
+}
+
+static unsigned long
+clk_generated_recalc_rate(struct clk_hw *hw,
+			  unsigned long parent_rate)
+{
+	struct clk_generated *gck = to_clk_generated(hw);
+
+	return DIV_ROUND_CLOSEST(parent_rate, gck->gckdiv + 1);
+}
+
+static int clk_generated_determine_rate(struct clk_hw *hw,
+					struct clk_rate_request *req)
+{
+	struct clk_generated *gck = to_clk_generated(hw);
+	struct clk_hw *parent = NULL;
+	long best_rate = -EINVAL;
+	unsigned long tmp_rate, min_rate;
+	int best_diff = -1;
+	int tmp_diff;
+	int i;
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+		u32 div;
+		unsigned long parent_rate;
+
+		parent = clk_hw_get_parent_by_index(hw, i);
+		if (!parent)
+			continue;
+
+		parent_rate = clk_hw_get_rate(parent);
+		min_rate = DIV_ROUND_CLOSEST(parent_rate, GENERATED_MAX_DIV + 1);
+		if (!parent_rate ||
+		    (gck->range.max && min_rate > gck->range.max))
+			continue;
+
+		for (div = 1; div < GENERATED_MAX_DIV + 2; div++) {
+			tmp_rate = DIV_ROUND_CLOSEST(parent_rate, div);
+			tmp_diff = abs(req->rate - tmp_rate);
+
+			if (best_diff < 0 || best_diff > tmp_diff) {
+				best_rate = tmp_rate;
+				best_diff = tmp_diff;
+				req->best_parent_rate = parent_rate;
+				req->best_parent_hw = parent;
+			}
+
+			if (!best_diff || tmp_rate < req->rate)
+				break;
+		}
+
+		if (!best_diff)
+			break;
+	}
+
+	pr_debug("GCLK: %s, best_rate = %ld, parent clk: %s @ %ld\n",
+		 __func__, best_rate,
+		 __clk_get_name((req->best_parent_hw)->clk),
+		 req->best_parent_rate);
+
+	if (best_rate < 0)
+		return best_rate;
+
+	req->rate = best_rate;
+	return 0;
+}
+
+/* No modification of hardware as we have the flag CLK_SET_PARENT_GATE set */
+static int clk_generated_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_generated *gck = to_clk_generated(hw);
+
+	if (index >= clk_hw_get_num_parents(hw))
+		return -EINVAL;
+
+	gck->parent_id = index;
+	return 0;
+}
+
+static u8 clk_generated_get_parent(struct clk_hw *hw)
+{
+	struct clk_generated *gck = to_clk_generated(hw);
+
+	return gck->parent_id;
+}
+
+/* No modification of hardware as we have the flag CLK_SET_RATE_GATE set */
+static int clk_generated_set_rate(struct clk_hw *hw,
+				  unsigned long rate,
+				  unsigned long parent_rate)
+{
+	struct clk_generated *gck = to_clk_generated(hw);
+	u32 div;
+
+	if (!rate)
+		return -EINVAL;
+
+	if (gck->range.max && rate > gck->range.max)
+		return -EINVAL;
+
+	div = DIV_ROUND_CLOSEST(parent_rate, rate);
+	if (div > GENERATED_MAX_DIV + 1 || !div)
+		return -EINVAL;
+
+	gck->gckdiv = div - 1;
+	return 0;
+}
+
+static const struct clk_ops generated_ops = {
+	.enable = clk_generated_enable,
+	.disable = clk_generated_disable,
+	.is_enabled = clk_generated_is_enabled,
+	.recalc_rate = clk_generated_recalc_rate,
+	.determine_rate = clk_generated_determine_rate,
+	.get_parent = clk_generated_get_parent,
+	.set_parent = clk_generated_set_parent,
+	.set_rate = clk_generated_set_rate,
+};
+
+/**
+ * clk_generated_startup - Initialize a given clock to its default parent and
+ * divisor parameter.
+ *
+ * @gck:	Generated clock to set the startup parameters for.
+ *
+ * Take parameters from the hardware and update local clock configuration
+ * accordingly.
+ */
+static void clk_generated_startup(struct clk_generated *gck)
+{
+	struct at91_pmc *pmc = gck->pmc;
+	u32 tmp;
+
+	pmc_lock(pmc);
+	pmc_write(pmc, AT91_PMC_PCR, (gck->id & AT91_PMC_PCR_PID_MASK));
+	tmp = pmc_read(pmc, AT91_PMC_PCR);
+	pmc_unlock(pmc);
+
+	gck->parent_id = (tmp & AT91_PMC_PCR_GCKCSS_MASK)
+					>> AT91_PMC_PCR_GCKCSS_OFFSET;
+	gck->gckdiv = (tmp & AT91_PMC_PCR_GCKDIV_MASK)
+					>> AT91_PMC_PCR_GCKDIV_OFFSET;
+}
+
+static struct clk * __init
+at91_clk_register_generated(struct at91_pmc *pmc, const char *name,
+			    const char **parent_names, u8 num_parents,
+			    u8 id, const struct clk_range *range)
+{
+	struct clk_generated *gck;
+	struct clk *clk = NULL;
+	struct clk_init_data init;
+
+	gck = kzalloc(sizeof(*gck), GFP_KERNEL);
+	if (!gck)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &generated_ops;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+	init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+
+	gck->id = id;
+	gck->hw.init = &init;
+	gck->pmc = pmc;
+	gck->range = *range;
+
+	clk = clk_register(NULL, &gck->hw);
+	if (IS_ERR(clk))
+		kfree(gck);
+	else
+		clk_generated_startup(gck);
+
+	return clk;
+}
+
+void __init of_sama5d2_clk_generated_setup(struct device_node *np,
+					   struct at91_pmc *pmc)
+{
+	int num;
+	u32 id;
+	const char *name;
+	struct clk *clk;
+	int num_parents;
+	const char *parent_names[GENERATED_SOURCE_MAX];
+	struct device_node *gcknp;
+	struct clk_range range = CLK_RANGE(0, 0);
+
+	num_parents = of_clk_get_parent_count(np);
+	if (num_parents <= 0 || num_parents > GENERATED_SOURCE_MAX)
+		return;
+
+	of_clk_parent_fill(np, parent_names, num_parents);
+
+	num = of_get_child_count(np);
+	if (!num || num > PERIPHERAL_MAX)
+		return;
+
+	for_each_child_of_node(np, gcknp) {
+		if (of_property_read_u32(gcknp, "reg", &id))
+			continue;
+
+		if (id < PERIPHERAL_ID_MIN || id >= PERIPHERAL_MAX)
+			continue;
+
+		if (of_property_read_string(np, "clock-output-names", &name))
+			name = gcknp->name;
+
+		of_at91_get_clk_range(gcknp, "atmel,clk-output-range",
+				      &range);
+
+		clk = at91_clk_register_generated(pmc, name, parent_names,
+						  num_parents, id, &range);
+		if (IS_ERR(clk))
+			continue;
+
+		of_clk_add_provider(gcknp, of_clk_src_simple_get, clk);
+	}
+}
--- a/drivers/clk/at91/clk-peripheral.c
+++ b/drivers/clk/at91/clk-peripheral.c
@@ -161,14 +161,18 @@ static int clk_sam9x5_peripheral_enable(struct clk_hw *hw)
 {
 	struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
 	struct at91_pmc *pmc = periph->pmc;
+	u32 tmp;

 	if (periph->id < PERIPHERAL_ID_MIN)
 		return 0;

-	pmc_write(pmc, AT91_PMC_PCR, (periph->id & AT91_PMC_PCR_PID) |
-				     AT91_PMC_PCR_CMD |
-				     AT91_PMC_PCR_DIV(periph->div) |
-				     AT91_PMC_PCR_EN);
+	pmc_lock(pmc);
+	pmc_write(pmc, AT91_PMC_PCR, (periph->id & AT91_PMC_PCR_PID_MASK));
+	tmp = pmc_read(pmc, AT91_PMC_PCR) & ~AT91_PMC_PCR_DIV_MASK;
+	pmc_write(pmc, AT91_PMC_PCR, tmp | AT91_PMC_PCR_DIV(periph->div)
+					 | AT91_PMC_PCR_CMD
+					 | AT91_PMC_PCR_EN);
+	pmc_unlock(pmc);
 	return 0;
 }

@@ -176,12 +180,16 @@ static void clk_sam9x5_peripheral_disable(struct clk_hw *hw)
 {
 	struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
 	struct at91_pmc *pmc = periph->pmc;
+	u32 tmp;

 	if (periph->id < PERIPHERAL_ID_MIN)
 		return;

-	pmc_write(pmc, AT91_PMC_PCR, (periph->id & AT91_PMC_PCR_PID) |
-				     AT91_PMC_PCR_CMD);
+	pmc_lock(pmc);
+	pmc_write(pmc, AT91_PMC_PCR, (periph->id & AT91_PMC_PCR_PID_MASK));
+	tmp = pmc_read(pmc, AT91_PMC_PCR) & ~AT91_PMC_PCR_EN;
+	pmc_write(pmc, AT91_PMC_PCR, tmp | AT91_PMC_PCR_CMD);
+	pmc_unlock(pmc);
 }

 static int clk_sam9x5_peripheral_is_enabled(struct clk_hw *hw)
@@ -194,7 +202,7 @@ static int clk_sam9x5_peripheral_is_enabled(struct clk_hw *hw)
 		return 1;

 	pmc_lock(pmc);
-	pmc_write(pmc, AT91_PMC_PCR, (periph->id & AT91_PMC_PCR_PID));
+	pmc_write(pmc, AT91_PMC_PCR, (periph->id & AT91_PMC_PCR_PID_MASK));
 	ret = !!(pmc_read(pmc, AT91_PMC_PCR) & AT91_PMC_PCR_EN);
 	pmc_unlock(pmc);

@@ -213,7 +221,7 @@ clk_sam9x5_peripheral_recalc_rate(struct clk_hw *hw,
 		return parent_rate;

 	pmc_lock(pmc);
-	pmc_write(pmc, AT91_PMC_PCR, (periph->id & AT91_PMC_PCR_PID));
+	pmc_write(pmc, AT91_PMC_PCR, (periph->id & AT91_PMC_PCR_PID_MASK));
 	tmp = pmc_read(pmc, AT91_PMC_PCR);
 	pmc_unlock(pmc);


--- a/drivers/clk/at91/clk-system.c
+++ b/drivers/clk/at91/clk-system.c
@@ -138,7 +138,8 @@ at91_clk_register_system(struct at91_pmc *pmc, const char *name,

 	clk = clk_register(NULL, &sys->hw);
 	if (IS_ERR(clk)) {
-		free_irq(sys->irq, sys);
+		if (irq)
+			free_irq(sys->irq, sys);
 		kfree(sys);
 	}


--- a/drivers/clk/at91/clk-utmi.c
+++ b/drivers/clk/at91/clk-utmi.c
@@ -47,7 +47,7 @@ static int clk_utmi_prepare(struct clk_hw *hw)
 {
 	struct clk_utmi *utmi = to_clk_utmi(hw);
 	struct at91_pmc *pmc = utmi->pmc;
-	u32 tmp = at91_pmc_read(AT91_CKGR_UCKR) | AT91_PMC_UPLLEN |
+	u32 tmp = pmc_read(pmc, AT91_CKGR_UCKR) | AT91_PMC_UPLLEN |
 		  AT91_PMC_UPLLCOUNT | AT91_PMC_BIASEN;

 	pmc_write(pmc, AT91_CKGR_UCKR, tmp);
@@ -73,7 +73,7 @@ static void clk_utmi_unprepare(struct clk_hw *hw)
 {
 	struct clk_utmi *utmi = to_clk_utmi(hw);
 	struct at91_pmc *pmc = utmi->pmc;
-	u32 tmp = at91_pmc_read(AT91_CKGR_UCKR) & ~AT91_PMC_UPLLEN;
+	u32 tmp = pmc_read(pmc, AT91_CKGR_UCKR) & ~AT91_PMC_UPLLEN;

 	pmc_write(pmc, AT91_CKGR_UCKR, tmp);
 }

--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -206,6 +206,14 @@ static const struct at91_pmc_caps at91sam9x5_caps = {
 			  AT91_PMC_MOSCRCS | AT91_PMC_CFDEV,
 };

+static const struct at91_pmc_caps sama5d2_caps = {
+	.available_irqs = AT91_PMC_MOSCS | AT91_PMC_LOCKA | AT91_PMC_MCKRDY |
+			  AT91_PMC_LOCKU | AT91_PMC_PCK0RDY |
+			  AT91_PMC_PCK1RDY | AT91_PMC_PCK2RDY |
+			  AT91_PMC_MOSCSELS | AT91_PMC_MOSCRCS |
+			  AT91_PMC_CFDEV | AT91_PMC_GCKRDY,
+};
+
 static const struct at91_pmc_caps sama5d3_caps = {
 	.available_irqs = AT91_PMC_MOSCS | AT91_PMC_LOCKA | AT91_PMC_MCKRDY |
 			  AT91_PMC_LOCKU | AT91_PMC_PCK0RDY |
@@ -368,6 +376,12 @@ static const struct of_device_id pmc_clk_ids[] __initconst = {
 		.compatible = "atmel,sama5d4-clk-h32mx",
 		.data = of_sama5d4_clk_h32mx_setup,
 	},
+#endif
+#if defined(CONFIG_HAVE_AT91_GENERATED_CLK)
+	{
+		.compatible = "atmel,sama5d2-clk-generated",
+		.data = of_sama5d2_clk_generated_setup,
+	},
 #endif
 	{ /*sentinel*/ }
 };
@@ -436,6 +450,13 @@ static void __init of_at91sam9x5_pmc_setup(struct device_node *np)
 CLK_OF_DECLARE(at91sam9x5_clk_pmc, "atmel,at91sam9x5-pmc",
 	       of_at91sam9x5_pmc_setup);

+static void __init of_sama5d2_pmc_setup(struct device_node *np)
+{
+	of_at91_pmc_setup(np, &sama5d2_caps);
+}
+CLK_OF_DECLARE(sama5d2_clk_pmc, "atmel,sama5d2-pmc",
+	       of_sama5d2_pmc_setup);
+
 static void __init of_sama5d3_pmc_setup(struct device_node *np)
 {
 	of_at91_pmc_setup(np, &sama5d3_caps);

--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -118,4 +118,7 @@ void of_at91sam9x5_clk_smd_setup(struct device_node *np,
 void of_sama5d4_clk_h32mx_setup(struct device_node *np,
 				struct at91_pmc *pmc);

+void of_sama5d2_clk_generated_setup(struct device_node *np,
+				    struct at91_pmc *pmc);
+
 #endif /* __PMC_H_ */
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
 config CLK_BCM_KONA
 	bool "Broadcom Kona CCU clock support"
-	depends on ARCH_BCM_MOBILE
+	depends on ARCH_BCM_MOBILE || COMPILE_TEST
 	depends on COMMON_CLK
 	default y
 	help
@@ -9,10 +9,8 @@ config CLK_BCM_KONA
 	  in the BCM281xx and BCM21664 families.

 config COMMON_CLK_IPROC
-	bool "Broadcom iProc clock support"
-	depends on ARCH_BCM_IPROC
+	bool
 	depends on COMMON_CLK
-	default ARCH_BCM_IPROC
 	help
 	  Enable common clock framework support for Broadcom SoCs
 	  based on the iProc architecture
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -3,4 +3,8 @@ obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona-setup.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o
 obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
+obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-ns2.o
 obj-$(CONFIG_ARCH_BCM_CYGNUS)	+= clk-cygnus.o
+obj-$(CONFIG_ARCH_BCM_NSP)	+= clk-nsp.o
+obj-$(CONFIG_ARCH_BCM_5301X)	+= clk-nsp.o
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
--- a/drivers/clk/bcm/clk-cygnus.c
+++ b/drivers/clk/bcm/clk-cygnus.c
@@ -23,28 +23,30 @@
 #include <dt-bindings/clock/bcm-cygnus.h>
 #include "clk-iproc.h"

-#define reg_val(o, s, w) { .offset = o, .shift = s, .width = w, }
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }

-#define aon_val(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
 	.pwr_shift = ps, .iso_shift = is }

-#define sw_ctrl_val(o, s) { .offset = o, .shift = s, }
+#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }

-#define asiu_div_val(o, es, hs, hw, ls, lw) \
+#define ASIU_DIV_VAL(o, es, hs, hw, ls, lw) \
 		{ .offset = o, .en_shift = es, .high_shift = hs, \
 		.high_width = hw, .low_shift = ls, .low_width = lw }

-#define reset_val(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
-	.reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
-	.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+	.p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
+	.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas,    \
 	.ka_width = kaw }

-#define vco_ctrl_val(uo, lo) { .u_offset = uo, .l_offset = lo }
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }

-#define enable_val(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
 	.hold_shift = hs, .bypass_shift = bs }

-#define asiu_gate_val(o, es) { .offset = o, .en_shift = es }
+#define ASIU_GATE_VAL(o, es) { .offset = o, .en_shift = es }

 static void __init cygnus_armpll_init(struct device_node *node)
 {
@@ -55,52 +57,53 @@ CLK_OF_DECLARE(cygnus_armpll, "brcm,cygnus-armpll", cygnus_armpll_init);
 static const struct iproc_pll_ctrl genpll = {
 	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
 		IPROC_CLK_PLL_NEEDS_SW_CFG,
-	.aon = aon_val(0x0, 2, 1, 0),
-	.reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
-	.sw_ctrl = sw_ctrl_val(0x10, 31),
-	.ndiv_int = reg_val(0x10, 20, 10),
-	.ndiv_frac = reg_val(0x10, 0, 20),
-	.pdiv = reg_val(0x14, 0, 4),
-	.vco_ctrl = vco_ctrl_val(0x18, 0x1c),
-	.status = reg_val(0x28, 12, 1),
+	.aon = AON_VAL(0x0, 2, 1, 0),
+	.reset = RESET_VAL(0x0, 11, 10),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
+	.status = REG_VAL(0x28, 12, 1),
 };

 static const struct iproc_clk_ctrl genpll_clk[] = {
 	[BCM_CYGNUS_GENPLL_AXI21_CLK] = {
 		.channel = BCM_CYGNUS_GENPLL_AXI21_CLK,
 		.flags = IPROC_CLK_AON,
-		.enable = enable_val(0x4, 6, 0, 12),
-		.mdiv = reg_val(0x20, 0, 8),
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x20, 0, 8),
 	},
 	[BCM_CYGNUS_GENPLL_250MHZ_CLK] = {
 		.channel = BCM_CYGNUS_GENPLL_250MHZ_CLK,
 		.flags = IPROC_CLK_AON,
-		.enable = enable_val(0x4, 7, 1, 13),
-		.mdiv = reg_val(0x20, 10, 8),
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x20, 10, 8),
 	},
 	[BCM_CYGNUS_GENPLL_IHOST_SYS_CLK] = {
 		.channel = BCM_CYGNUS_GENPLL_IHOST_SYS_CLK,
 		.flags = IPROC_CLK_AON,
-		.enable = enable_val(0x4, 8, 2, 14),
-		.mdiv = reg_val(0x20, 20, 8),
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x20, 20, 8),
 	},
 	[BCM_CYGNUS_GENPLL_ENET_SW_CLK] = {
 		.channel = BCM_CYGNUS_GENPLL_ENET_SW_CLK,
 		.flags = IPROC_CLK_AON,
-		.enable = enable_val(0x4, 9, 3, 15),
-		.mdiv = reg_val(0x24, 0, 8),
+		.enable = ENABLE_VAL(0x4, 9, 3, 15),
+		.mdiv = REG_VAL(0x24, 0, 8),
 	},
 	[BCM_CYGNUS_GENPLL_AUDIO_125_CLK] = {
 		.channel = BCM_CYGNUS_GENPLL_AUDIO_125_CLK,
 		.flags = IPROC_CLK_AON,
-		.enable = enable_val(0x4, 10, 4, 16),
-		.mdiv = reg_val(0x24, 10, 8),
+		.enable = ENABLE_VAL(0x4, 10, 4, 16),
+		.mdiv = REG_VAL(0x24, 10, 8),
 	},
 	[BCM_CYGNUS_GENPLL_CAN_CLK] = {
 		.channel = BCM_CYGNUS_GENPLL_CAN_CLK,
 		.flags = IPROC_CLK_AON,
-		.enable = enable_val(0x4, 11, 5, 17),
-		.mdiv = reg_val(0x24, 20, 8),
+		.enable = ENABLE_VAL(0x4, 11, 5, 17),
+		.mdiv = REG_VAL(0x24, 20, 8),
 	},
 };

@@ -113,51 +116,52 @@ CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll", cygnus_genpll_clk_init);

 static const struct iproc_pll_ctrl lcpll0 = {
 	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
-	.aon = aon_val(0x0, 2, 5, 4),
-	.reset = reset_val(0x0, 31, 30, 27, 3, 23, 4, 19, 4),
-	.sw_ctrl = sw_ctrl_val(0x4, 31),
-	.ndiv_int = reg_val(0x4, 16, 10),
-	.pdiv = reg_val(0x4, 26, 4),
-	.vco_ctrl = vco_ctrl_val(0x10, 0x14),
-	.status = reg_val(0x18, 12, 1),
+	.aon = AON_VAL(0x0, 2, 5, 4),
+	.reset = RESET_VAL(0x0, 31, 30),
+	.dig_filter = DF_VAL(0x0, 27, 3, 23, 4, 19, 4),
+	.sw_ctrl = SW_CTRL_VAL(0x4, 31),
+	.ndiv_int = REG_VAL(0x4, 16, 10),
+	.pdiv = REG_VAL(0x4, 26, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x10, 0x14),
+	.status = REG_VAL(0x18, 12, 1),
 };

 static const struct iproc_clk_ctrl lcpll0_clk[] = {
 	[BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK] = {
 		.channel = BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK,
 		.flags = IPROC_CLK_AON,
-		.enable = enable_val(0x0, 7, 1, 13),
-		.mdiv = reg_val(0x8, 0, 8),
+		.enable = ENABLE_VAL(0x0, 7, 1, 13),
+		.mdiv = REG_VAL(0x8, 0, 8),
 	},
 	[BCM_CYGNUS_LCPLL0_DDR_PHY_CLK] = {
 		.channel = BCM_CYGNUS_LCPLL0_DDR_PHY_CLK,
 		.flags = IPROC_CLK_AON,
-		.enable = enable_val(0x0, 8, 2, 14),
-		.mdiv = reg_val(0x8, 10, 8),
+		.enable = ENABLE_VAL(0x0, 8, 2, 14),
+		.mdiv = REG_VAL(0x8, 10, 8),
 	},
 	[BCM_CYGNUS_LCPLL0_SDIO_CLK] = {
 		.channel = BCM_CYGNUS_LCPLL0_SDIO_CLK,
 		.flags = IPROC_CLK_AON,
-		.enable = enable_val(0x0, 9, 3, 15),
-		.mdiv = reg_val(0x8, 20, 8),
+		.enable = ENABLE_VAL(0x0, 9, 3, 15),
+		.mdiv = REG_VAL(0x8, 20, 8),
 	},
 	[BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK] = {
 		.channel = BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK,
 		.flags = IPROC_CLK_AON,
-		.enable = enable_val(0x0, 10, 4, 16),
-		.mdiv = reg_val(0xc, 0, 8),
+		.enable = ENABLE_VAL(0x0, 10, 4, 16),
+		.mdiv = REG_VAL(0xc, 0, 8),
 	},
 	[BCM_CYGNUS_LCPLL0_SMART_CARD_CLK] = {
 		.channel = BCM_CYGNUS_LCPLL0_SMART_CARD_CLK,
 		.flags = IPROC_CLK_AON,
-		.enable = enable_val(0x0, 11, 5, 17),
-		.mdiv = reg_val(0xc, 10, 8),
+		.enable = ENABLE_VAL(0x0, 11, 5, 17),
+		.mdiv = REG_VAL(0xc, 10, 8),
 	},
 	[BCM_CYGNUS_LCPLL0_CH5_UNUSED] = {
 		.channel = BCM_CYGNUS_LCPLL0_CH5_UNUSED,
 		.flags = IPROC_CLK_AON,
-		.enable = enable_val(0x0, 12, 6, 18),
-		.mdiv = reg_val(0xc, 20, 8),
+		.enable = ENABLE_VAL(0x0, 12, 6, 18),
+		.mdiv = REG_VAL(0xc, 20, 8),
 	},
 };

@@ -189,52 +193,53 @@ static const struct iproc_pll_vco_param mipipll_vco_params[] = {
 static const struct iproc_pll_ctrl mipipll = {
 	.flags = IPROC_CLK_PLL_ASIU | IPROC_CLK_PLL_HAS_NDIV_FRAC |
 		 IPROC_CLK_NEEDS_READ_BACK,
-	.aon = aon_val(0x0, 4, 17, 16),
-	.asiu = asiu_gate_val(0x0, 3),
-	.reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 4),
-	.ndiv_int = reg_val(0x10, 20, 10),
-	.ndiv_frac = reg_val(0x10, 0, 20),
-	.pdiv = reg_val(0x14, 0, 4),
-	.vco_ctrl = vco_ctrl_val(0x18, 0x1c),
-	.status = reg_val(0x28, 12, 1),
+	.aon = AON_VAL(0x0, 4, 17, 16),
+	.asiu = ASIU_GATE_VAL(0x0, 3),
+	.reset = RESET_VAL(0x0, 11, 10),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 4),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
+	.status = REG_VAL(0x28, 12, 1),
 };

 static const struct iproc_clk_ctrl mipipll_clk[] = {
 	[BCM_CYGNUS_MIPIPLL_CH0_UNUSED] = {
 		.channel = BCM_CYGNUS_MIPIPLL_CH0_UNUSED,
 		.flags = IPROC_CLK_NEEDS_READ_BACK,
-		.enable = enable_val(0x4, 12, 6, 18),
-		.mdiv = reg_val(0x20, 0, 8),
+		.enable = ENABLE_VAL(0x4, 12, 6, 18),
+		.mdiv = REG_VAL(0x20, 0, 8),
 	},
 	[BCM_CYGNUS_MIPIPLL_CH1_LCD] = {
 		.channel = BCM_CYGNUS_MIPIPLL_CH1_LCD,
 		.flags = IPROC_CLK_NEEDS_READ_BACK,
-		.enable = enable_val(0x4, 13, 7, 19),
-		.mdiv = reg_val(0x20, 10, 8),
+		.enable = ENABLE_VAL(0x4, 13, 7, 19),
+		.mdiv = REG_VAL(0x20, 10, 8),
 	},
 	[BCM_CYGNUS_MIPIPLL_CH2_V3D] = {
 		.channel = BCM_CYGNUS_MIPIPLL_CH2_V3D,
 		.flags = IPROC_CLK_NEEDS_READ_BACK,
-		.enable = enable_val(0x4, 14, 8, 20),
-		.mdiv = reg_val(0x20, 20, 8),
+		.enable = ENABLE_VAL(0x4, 14, 8, 20),
+		.mdiv = REG_VAL(0x20, 20, 8),
 	},
 	[BCM_CYGNUS_MIPIPLL_CH3_UNUSED] = {
 		.channel = BCM_CYGNUS_MIPIPLL_CH3_UNUSED,
 		.flags = IPROC_CLK_NEEDS_READ_BACK,
-		.enable = enable_val(0x4, 15, 9, 21),
-		.mdiv = reg_val(0x24, 0, 8),
+		.enable = ENABLE_VAL(0x4, 15, 9, 21),
+		.mdiv = REG_VAL(0x24, 0, 8),
 	},
 	[BCM_CYGNUS_MIPIPLL_CH4_UNUSED] = {
 		.channel = BCM_CYGNUS_MIPIPLL_CH4_UNUSED,
 		.flags = IPROC_CLK_NEEDS_READ_BACK,
-		.enable = enable_val(0x4, 16, 10, 22),
-		.mdiv = reg_val(0x24, 10, 8),
+		.enable = ENABLE_VAL(0x4, 16, 10, 22),
+		.mdiv = REG_VAL(0x24, 10, 8),
 	},
 	[BCM_CYGNUS_MIPIPLL_CH5_UNUSED] = {
 		.channel = BCM_CYGNUS_MIPIPLL_CH5_UNUSED,
 		.flags = IPROC_CLK_NEEDS_READ_BACK,
-		.enable = enable_val(0x4, 17, 11, 23),
-		.mdiv = reg_val(0x24, 20, 8),
+		.enable = ENABLE_VAL(0x4, 17, 11, 23),
+		.mdiv = REG_VAL(0x24, 20, 8),
 	},
 };

@@ -247,15 +252,15 @@ static void __init cygnus_mipipll_clk_init(struct device_node *node)
 CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll", cygnus_mipipll_clk_init);

 static const struct iproc_asiu_div asiu_div[] = {
-	[BCM_CYGNUS_ASIU_KEYPAD_CLK] = asiu_div_val(0x0, 31, 16, 10, 0, 10),
-	[BCM_CYGNUS_ASIU_ADC_CLK] = asiu_div_val(0x4, 31, 16, 10, 0, 10),
-	[BCM_CYGNUS_ASIU_PWM_CLK] = asiu_div_val(0x8, 31, 16, 10, 0, 10),
+	[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_DIV_VAL(0x0, 31, 16, 10, 0, 10),
+	[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_DIV_VAL(0x4, 31, 16, 10, 0, 10),
+	[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_DIV_VAL(0x8, 31, 16, 10, 0, 10),
 };

 static const struct iproc_asiu_gate asiu_gate[] = {
-	[BCM_CYGNUS_ASIU_KEYPAD_CLK] = asiu_gate_val(0x0, 7),
-	[BCM_CYGNUS_ASIU_ADC_CLK] = asiu_gate_val(0x0, 9),
-	[BCM_CYGNUS_ASIU_PWM_CLK] = asiu_gate_val(IPROC_CLK_INVALID_OFFSET, 0),
+	[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_GATE_VAL(0x0, 7),
+	[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_GATE_VAL(0x0, 9),
+	[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_GATE_VAL(IPROC_CLK_INVALID_OFFSET, 0),
 };

 static void __init cygnus_asiu_init(struct device_node *node)

--- a/drivers/clk/bcm/clk-iproc-pll.c
+++ b/drivers/clk/bcm/clk-iproc-pll.c
@@ -74,7 +74,8 @@ struct iproc_clk {
 };

 struct iproc_pll {
-	void __iomem *pll_base;
+	void __iomem *status_base;
+	void __iomem *control_base;
 	void __iomem *pwr_base;
 	void __iomem *asiu_base;

@@ -127,7 +128,7 @@ static int pll_wait_for_lock(struct iproc_pll *pll)
 	const struct iproc_pll_ctrl *ctrl = pll->ctrl;

 	for (i = 0; i < LOCK_DELAY; i++) {
-		u32 val = readl(pll->pll_base + ctrl->status.offset);
+		u32 val = readl(pll->status_base + ctrl->status.offset);

 		if (val & (1 << ctrl->status.shift))
 			return 0;
@@ -137,6 +138,18 @@ static int pll_wait_for_lock(struct iproc_pll *pll)
 	return -EIO;
 }

+static void iproc_pll_write(const struct iproc_pll *pll, void __iomem *base,
+			    const u32 offset, u32 val)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+	writel(val, base + offset);
+
+	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK &&
+		     (base == pll->status_base || base == pll->control_base)))
+		val = readl(base + offset);
+}
+
 static void __pll_disable(struct iproc_pll *pll)
 {
 	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
@@ -145,17 +158,25 @@ static void __pll_disable(struct iproc_pll *pll)
 	if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
 		val = readl(pll->asiu_base + ctrl->asiu.offset);
 		val &= ~(1 << ctrl->asiu.en_shift);
-		writel(val, pll->asiu_base + ctrl->asiu.offset);
+		iproc_pll_write(pll, pll->asiu_base, ctrl->asiu.offset, val);
+	}
+
+	if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
+		val = readl(pll->control_base + ctrl->aon.offset);
+		val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
+		iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
 	}

-	/* latch input value so core power can be shut down */
-	val = readl(pll->pwr_base + ctrl->aon.offset);
-	val |= (1 << ctrl->aon.iso_shift);
-	writel(val, pll->pwr_base + ctrl->aon.offset);
+	if (pll->pwr_base) {
+		/* latch input value so core power can be shut down */
+		val = readl(pll->pwr_base + ctrl->aon.offset);
+		val |= 1 << ctrl->aon.iso_shift;
+		iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);

-	/* power down the core */
-	val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
-	writel(val, pll->pwr_base + ctrl->aon.offset);
+		/* power down the core */
+		val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+		iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
+	}
 }

 static int __pll_enable(struct iproc_pll *pll)
@@ -163,17 +184,25 @@ static int __pll_enable(struct iproc_pll *pll)
 	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
 	u32 val;

-	/* power up the PLL and make sure it's not latched */
-	val = readl(pll->pwr_base + ctrl->aon.offset);
-	val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
-	val &= ~(1 << ctrl->aon.iso_shift);
-	writel(val, pll->pwr_base + ctrl->aon.offset);
+	if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
+		val = readl(pll->control_base + ctrl->aon.offset);
+		val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+		iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
+	}
+
+	if (pll->pwr_base) {
+		/* power up the PLL and make sure it's not latched */
+		val = readl(pll->pwr_base + ctrl->aon.offset);
+		val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
+		val &= ~(1 << ctrl->aon.iso_shift);
+		iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
+	}

 	/* certain PLLs also need to be ungated from the ASIU top level */
 	if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
 		val = readl(pll->asiu_base + ctrl->asiu.offset);
 		val |= (1 << ctrl->asiu.en_shift);
-		writel(val, pll->asiu_base + ctrl->asiu.offset);
+		iproc_pll_write(pll, pll->asiu_base, ctrl->asiu.offset, val);
 	}

 	return 0;
@@ -185,11 +214,9 @@ static void __pll_put_in_reset(struct iproc_pll *pll)
 	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
 	const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;

-	val = readl(pll->pll_base + reset->offset);
+	val = readl(pll->control_base + reset->offset);
 	val &= ~(1 << reset->reset_shift | 1 << reset->p_reset_shift);
-	writel(val, pll->pll_base + reset->offset);
-	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
-		readl(pll->pll_base + reset->offset);
+	iproc_pll_write(pll, pll->control_base, reset->offset, val);
 }

 static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
@@ -198,17 +225,19 @@ static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
 	u32 val;
 	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
 	const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
+	const struct iproc_pll_dig_filter_ctrl *dig_filter = &ctrl->dig_filter;
+
+	val = readl(pll->control_base + dig_filter->offset);
+	val &= ~(bit_mask(dig_filter->ki_width) << dig_filter->ki_shift |
+		bit_mask(dig_filter->kp_width) << dig_filter->kp_shift |
+		bit_mask(dig_filter->ka_width) << dig_filter->ka_shift);
+	val |= ki << dig_filter->ki_shift | kp << dig_filter->kp_shift |
+	       ka << dig_filter->ka_shift;
+	iproc_pll_write(pll, pll->control_base, dig_filter->offset, val);

-	val = readl(pll->pll_base + reset->offset);
-	val &= ~(bit_mask(reset->ki_width) << reset->ki_shift |
-		 bit_mask(reset->kp_width) << reset->kp_shift |
-		 bit_mask(reset->ka_width) << reset->ka_shift);
-	val |=  ki << reset->ki_shift | kp << reset->kp_shift |
-		ka << reset->ka_shift;
+	val = readl(pll->control_base + reset->offset);
 	val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
-	writel(val, pll->pll_base + reset->offset);
-	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
-		readl(pll->pll_base + reset->offset);
+	iproc_pll_write(pll, pll->control_base, reset->offset, val);
 }

 static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
@@ -263,10 +292,9 @@ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
 	/* put PLL in reset */
 	__pll_put_in_reset(pll);

-	writel(0, pll->pll_base + ctrl->vco_ctrl.u_offset);
-	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
-		readl(pll->pll_base + ctrl->vco_ctrl.u_offset);
-	val = readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
+	iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0);
+
+	val = readl(pll->control_base + ctrl->vco_ctrl.l_offset);

 	if (rate >= VCO_LOW && rate < VCO_MID)
 		val |= (1 << PLL_VCO_LOW_SHIFT);
@@ -276,36 +304,29 @@ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
 	else
 		val |= (1 << PLL_VCO_HIGH_SHIFT);

-	writel(val, pll->pll_base + ctrl->vco_ctrl.l_offset);
-	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
-		readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
+	iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.l_offset, val);

 	/* program integer part of NDIV */
-	val = readl(pll->pll_base + ctrl->ndiv_int.offset);
+	val = readl(pll->control_base + ctrl->ndiv_int.offset);
 	val &= ~(bit_mask(ctrl->ndiv_int.width) << ctrl->ndiv_int.shift);
 	val |= vco->ndiv_int << ctrl->ndiv_int.shift;
-	writel(val, pll->pll_base + ctrl->ndiv_int.offset);
-	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
-		readl(pll->pll_base + ctrl->ndiv_int.offset);
+	iproc_pll_write(pll, pll->control_base, ctrl->ndiv_int.offset, val);

 	/* program fractional part of NDIV */
 	if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
-		val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
+		val = readl(pll->control_base + ctrl->ndiv_frac.offset);
 		val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
 			 ctrl->ndiv_frac.shift);
 		val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
-		writel(val, pll->pll_base + ctrl->ndiv_frac.offset);
-		if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
-			readl(pll->pll_base + ctrl->ndiv_frac.offset);
+		iproc_pll_write(pll, pll->control_base, ctrl->ndiv_frac.offset,
+				val);
 	}

 	/* program PDIV */
-	val = readl(pll->pll_base + ctrl->pdiv.offset);
+	val = readl(pll->control_base + ctrl->pdiv.offset);
 	val &= ~(bit_mask(ctrl->pdiv.width) << ctrl->pdiv.shift);
 	val |= vco->pdiv << ctrl->pdiv.shift;
-	writel(val, pll->pll_base + ctrl->pdiv.offset);
-	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
-		readl(pll->pll_base + ctrl->pdiv.offset);
+	iproc_pll_write(pll, pll->control_base, ctrl->pdiv.offset, val);

 	__pll_bring_out_reset(pll, kp, ka, ki);

@@ -345,14 +366,14 @@ static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
 	struct iproc_pll *pll = clk->pll;
 	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
 	u32 val;
-	u64 ndiv;
-	unsigned int ndiv_int, ndiv_frac, pdiv;
+	u64 ndiv, ndiv_int, ndiv_frac;
+	unsigned int pdiv;

 	if (parent_rate == 0)
 		return 0;

 	/* PLL needs to be locked */
-	val = readl(pll->pll_base + ctrl->status.offset);
+	val = readl(pll->status_base + ctrl->status.offset);
 	if ((val & (1 << ctrl->status.shift)) == 0) {
 		clk->rate = 0;
 		return 0;
@@ -363,25 +384,22 @@ static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
 	 *
 	 * ((ndiv_int + ndiv_frac / 2^20) * (parent clock rate / pdiv)
 	 */
-	val = readl(pll->pll_base + ctrl->ndiv_int.offset);
+	val = readl(pll->control_base + ctrl->ndiv_int.offset);
 	ndiv_int = (val >> ctrl->ndiv_int.shift) &
 		bit_mask(ctrl->ndiv_int.width);
-	ndiv = (u64)ndiv_int << ctrl->ndiv_int.shift;
+	ndiv = ndiv_int << 20;

 	if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
-		val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
+		val = readl(pll->control_base + ctrl->ndiv_frac.offset);
 		ndiv_frac = (val >> ctrl->ndiv_frac.shift) &
 			bit_mask(ctrl->ndiv_frac.width);
-
-		if (ndiv_frac != 0)
-			ndiv = ((u64)ndiv_int << ctrl->ndiv_int.shift) |
-				ndiv_frac;
+		ndiv += ndiv_frac;
 	}

-	val = readl(pll->pll_base + ctrl->pdiv.offset);
+	val = readl(pll->control_base + ctrl->pdiv.offset);
 	pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);

-	clk->rate = (ndiv * parent_rate) >> ctrl->ndiv_int.shift;
+	clk->rate = (ndiv * parent_rate) >> 20;

 	if (pdiv == 0)
 		clk->rate *= 2;
@@ -443,16 +461,14 @@ static int iproc_clk_enable(struct clk_hw *hw)
 	u32 val;

 	/* channel enable is active low */
-	val = readl(pll->pll_base + ctrl->enable.offset);
+	val = readl(pll->control_base + ctrl->enable.offset);
 	val &= ~(1 << ctrl->enable.enable_shift);
-	writel(val, pll->pll_base + ctrl->enable.offset);
+	iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);

 	/* also make sure channel is not held */
-	val = readl(pll->pll_base + ctrl->enable.offset);
+	val = readl(pll->control_base + ctrl->enable.offset);
 	val &= ~(1 << ctrl->enable.hold_shift);
-	writel(val, pll->pll_base + ctrl->enable.offset);
-	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
-		readl(pll->pll_base + ctrl->enable.offset);
+	iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);

 	return 0;
 }
@@ -467,11 +483,9 @@ static void iproc_clk_disable(struct clk_hw *hw)
 	if (ctrl->flags & IPROC_CLK_AON)
 		return;

-	val = readl(pll->pll_base + ctrl->enable.offset);
+	val = readl(pll->control_base + ctrl->enable.offset);
 	val |= 1 << ctrl->enable.enable_shift;
-	writel(val, pll->pll_base + ctrl->enable.offset);
-	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
-		readl(pll->pll_base + ctrl->enable.offset);
+	iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
 }

 static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
@@ -486,7 +500,7 @@ static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
 	if (parent_rate == 0)
 		return 0;

-	val = readl(pll->pll_base + ctrl->mdiv.offset);
+	val = readl(pll->control_base + ctrl->mdiv.offset);
 	mdiv = (val >> ctrl->mdiv.shift) & bit_mask(ctrl->mdiv.width);
 	if (mdiv == 0)
 		mdiv = 256;
@@ -533,16 +547,14 @@ static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (div > 256)
 		return -EINVAL;

-	val = readl(pll->pll_base + ctrl->mdiv.offset);
+	val = readl(pll->control_base + ctrl->mdiv.offset);
 	if (div == 256) {
 		val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
 	} else {
 		val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
 		val |= div << ctrl->mdiv.shift;
 	}
-	writel(val, pll->pll_base + ctrl->mdiv.offset);
-	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
-		readl(pll->pll_base + ctrl->mdiv.offset);
+	iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val);
 	clk->rate = parent_rate / div;

 	return 0;
@@ -567,11 +579,10 @@ static void iproc_pll_sw_cfg(struct iproc_pll *pll)
 	if (ctrl->flags & IPROC_CLK_PLL_NEEDS_SW_CFG) {
 		u32 val;

-		val = readl(pll->pll_base + ctrl->sw_ctrl.offset);
+		val = readl(pll->control_base + ctrl->sw_ctrl.offset);
 		val |= BIT(ctrl->sw_ctrl.shift);
-		writel(val, pll->pll_base + ctrl->sw_ctrl.offset);
-		if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
-			readl(pll->pll_base + ctrl->sw_ctrl.offset);
+		iproc_pll_write(pll, pll->control_base, ctrl->sw_ctrl.offset,
+				val);
 	}
 }

@@ -606,13 +617,12 @@ void __init iproc_pll_clk_setup(struct device_node *node,
 	if (WARN_ON(!pll->clks))
 		goto err_clks;

-	pll->pll_base = of_iomap(node, 0);
-	if (WARN_ON(!pll->pll_base))
+	pll->control_base = of_iomap(node, 0);
+	if (WARN_ON(!pll->control_base))
 		goto err_pll_iomap;

+	/* Some SoCs do not require the pwr_base, thus failing is not fatal */
 	pll->pwr_base = of_iomap(node, 1);
-	if (WARN_ON(!pll->pwr_base))
-		goto err_pwr_iomap;

 	/* some PLLs require gating control at the top ASIU level */
 	if (pll_ctrl->flags & IPROC_CLK_PLL_ASIU) {
@@ -621,6 +631,16 @@ void __init iproc_pll_clk_setup(struct device_node *node,
 			goto err_asiu_iomap;
 	}

+	if (pll_ctrl->flags & IPROC_CLK_PLL_SPLIT_STAT_CTRL) {
+		/* Some SoCs have a split status/control.  If this does not
+		 * exist, assume they are unified.
+		 */
+		pll->status_base = of_iomap(node, 2);
+		if (!pll->status_base)
+			goto err_status_iomap;
+	} else
+		pll->status_base = pll->control_base;
+
 	/* initialize and register the PLL itself */
 	pll->ctrl = pll_ctrl;

@@ -691,14 +711,18 @@ void __init iproc_pll_clk_setup(struct device_node *node,
 		clk_unregister(pll->clk_data.clks[i]);

 err_pll_register:
+	if (pll->status_base != pll->control_base)
+		iounmap(pll->status_base);
+
+err_status_iomap:
 	if (pll->asiu_base)
 		iounmap(pll->asiu_base);

 err_asiu_iomap:
-	iounmap(pll->pwr_base);
+	if (pll->pwr_base)
+		iounmap(pll->pwr_base);

-err_pwr_iomap:
-	iounmap(pll->pll_base);
+	iounmap(pll->control_base);

 err_pll_iomap:
 	kfree(pll->clks);

--- a/drivers/clk/bcm/clk-iproc.h
+++ b/drivers/clk/bcm/clk-iproc.h
@@ -48,6 +48,18 @@
 */
 #define IPROC_CLK_PLL_NEEDS_SW_CFG BIT(4)

+/*
+ * Some PLLs use a different way to control clock power, via the PWRDWN bit in
+ * the PLL control register
+ */
+#define IPROC_CLK_EMBED_PWRCTRL BIT(5)
+
+/*
+ * Some PLLs have separate registers for Status and Control.  Identify this to
+ * let the driver know if additional registers need to be used
+ */
+#define IPROC_CLK_PLL_SPLIT_STAT_CTRL BIT(6)
+
 /*
 * Parameters for VCO frequency configuration
 *
@@ -88,12 +100,19 @@ struct iproc_pll_aon_pwr_ctrl {
 };

 /*
- * Control of the PLL reset, with Ki, Kp, and Ka parameters
+ * Control of the PLL reset
 */
 struct iproc_pll_reset_ctrl {
 	unsigned int offset;
 	unsigned int reset_shift;
 	unsigned int p_reset_shift;
+};
+
+/*
+ * Control of the Ki, Kp, and Ka parameters
+ */
+struct iproc_pll_dig_filter_ctrl {
+	unsigned int offset;
 	unsigned int ki_shift;
 	unsigned int ki_width;
 	unsigned int kp_shift;
@@ -123,6 +142,7 @@ struct iproc_pll_ctrl {
 	struct iproc_pll_aon_pwr_ctrl aon;
 	struct iproc_asiu_gate asiu;
 	struct iproc_pll_reset_ctrl reset;
+	struct iproc_pll_dig_filter_ctrl dig_filter;
 	struct iproc_pll_sw_ctrl sw_ctrl;
 	struct iproc_clk_reg_op ndiv_int;
 	struct iproc_clk_reg_op ndiv_frac;

--- a/drivers/clk/bcm/clk-ns2.c
+++ b/drivers/clk/bcm/clk-ns2.c
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/bcm-ns2.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+	.pwr_shift = ps, .iso_shift = is }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+	.p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
+	.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas,    \
+	.ka_width = kaw }
+
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+	.hold_shift = hs, .bypass_shift = bs }
+
+static const struct iproc_pll_ctrl genpll_scr = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
+	.aon = AON_VAL(0x0, 1, 15, 12),
+	.reset = RESET_VAL(0x4, 2, 1),
+	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
+	.ndiv_int = REG_VAL(0x8, 4, 10),
+	.pdiv = REG_VAL(0x8, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
+	.status = REG_VAL(0x0, 27, 1),
+};
+
+
+static const struct iproc_clk_ctrl genpll_scr_clk[] = {
+	/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
+	 * in NS2.  However, it doesn't appear to be used anywhere, so setting
+	 * it to 0.
+	 */
+	[BCM_NS2_GENPLL_SCR_SCR_CLK] = {
+		.channel = BCM_NS2_GENPLL_SCR_SCR_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 18, 12, 0),
+		.mdiv = REG_VAL(0x18, 0, 8),
+	},
+	[BCM_NS2_GENPLL_SCR_FS_CLK] = {
+		.channel = BCM_NS2_GENPLL_SCR_FS_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 19, 13, 0),
+		.mdiv = REG_VAL(0x18, 8, 8),
+	},
+	[BCM_NS2_GENPLL_SCR_AUDIO_CLK] = {
+		.channel = BCM_NS2_GENPLL_SCR_AUDIO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 20, 14, 0),
+		.mdiv = REG_VAL(0x14, 0, 8),
+	},
+	[BCM_NS2_GENPLL_SCR_CH3_UNUSED] = {
+		.channel = BCM_NS2_GENPLL_SCR_CH3_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 21, 15, 0),
+		.mdiv = REG_VAL(0x14, 8, 8),
+	},
+	[BCM_NS2_GENPLL_SCR_CH4_UNUSED] = {
+		.channel = BCM_NS2_GENPLL_SCR_CH4_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 22, 16, 0),
+		.mdiv = REG_VAL(0x14, 16, 8),
+	},
+	[BCM_NS2_GENPLL_SCR_CH5_UNUSED] = {
+		.channel = BCM_NS2_GENPLL_SCR_CH5_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 23, 17, 0),
+		.mdiv = REG_VAL(0x14, 24, 8),
+	},
+};
+
+static void __init ns2_genpll_scr_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &genpll_scr, NULL, 0, genpll_scr_clk,
+			    ARRAY_SIZE(genpll_scr_clk));
+}
+CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm,ns2-genpll-scr",
+	       ns2_genpll_scr_clk_init);
+
+static const struct iproc_pll_ctrl genpll_sw = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
+	.aon = AON_VAL(0x0, 2, 9, 8),
+	.reset = RESET_VAL(0x4, 2, 1),
+	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
+	.ndiv_int = REG_VAL(0x8, 4, 10),
+	.pdiv = REG_VAL(0x8, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
+	.status = REG_VAL(0x0, 13, 1),
+};
+
+static const struct iproc_clk_ctrl genpll_sw_clk[] = {
+	/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
+	 * in NS2.  However, it doesn't appear to be used anywhere, so setting
+	 * it to 0.
+	 */
+	[BCM_NS2_GENPLL_SW_RPE_CLK] = {
+		.channel = BCM_NS2_GENPLL_SW_RPE_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 18, 12, 0),
+		.mdiv = REG_VAL(0x18, 0, 8),
+	},
+	[BCM_NS2_GENPLL_SW_250_CLK] = {
+		.channel = BCM_NS2_GENPLL_SW_250_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 19, 13, 0),
+		.mdiv = REG_VAL(0x18, 8, 8),
+	},
+	[BCM_NS2_GENPLL_SW_NIC_CLK] = {
+		.channel = BCM_NS2_GENPLL_SW_NIC_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 20, 14, 0),
+		.mdiv = REG_VAL(0x14, 0, 8),
+	},
+	[BCM_NS2_GENPLL_SW_CHIMP_CLK] = {
+		.channel = BCM_NS2_GENPLL_SW_CHIMP_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 21, 15, 0),
+		.mdiv = REG_VAL(0x14, 8, 8),
+	},
+	[BCM_NS2_GENPLL_SW_PORT_CLK] = {
+		.channel = BCM_NS2_GENPLL_SW_PORT_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 22, 16, 0),
+		.mdiv = REG_VAL(0x14, 16, 8),
+	},
+	[BCM_NS2_GENPLL_SW_SDIO_CLK] = {
+		.channel = BCM_NS2_GENPLL_SW_SDIO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 23, 17, 0),
+		.mdiv = REG_VAL(0x14, 24, 8),
+	},
+};
+
+static void __init ns2_genpll_sw_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &genpll_sw, NULL, 0, genpll_sw_clk,
+			    ARRAY_SIZE(genpll_sw_clk));
+}
+CLK_OF_DECLARE(ns2_genpll_sw_clk, "brcm,ns2-genpll-sw",
+	       ns2_genpll_sw_clk_init);
+
+static const struct iproc_pll_ctrl lcpll_ddr = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
+	.aon = AON_VAL(0x0, 2, 1, 0),
+	.reset = RESET_VAL(0x4, 2, 1),
+	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),
+	.ndiv_int = REG_VAL(0x8, 4, 10),
+	.pdiv = REG_VAL(0x8, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
+	.status = REG_VAL(0x0, 0, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll_ddr_clk[] = {
+	/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
+	 * in NS2.  However, it doesn't appear to be used anywhere, so setting
+	 * it to 0.
+	 */
+	[BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK] = {
+		.channel = BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 18, 12, 0),
+		.mdiv = REG_VAL(0x14, 0, 8),
+	},
+	[BCM_NS2_LCPLL_DDR_DDR_CLK] = {
+		.channel = BCM_NS2_LCPLL_DDR_DDR_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 19, 13, 0),
+		.mdiv = REG_VAL(0x14, 8, 8),
+	},
+	[BCM_NS2_LCPLL_DDR_CH2_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_DDR_CH2_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 20, 14, 0),
+		.mdiv = REG_VAL(0x10, 0, 8),
+	},
+	[BCM_NS2_LCPLL_DDR_CH3_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_DDR_CH3_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 21, 15, 0),
+		.mdiv = REG_VAL(0x10, 8, 8),
+	},
+	[BCM_NS2_LCPLL_DDR_CH4_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_DDR_CH4_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 22, 16, 0),
+		.mdiv = REG_VAL(0x10, 16, 8),
+	},
+	[BCM_NS2_LCPLL_DDR_CH5_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_DDR_CH5_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 23, 17, 0),
+		.mdiv = REG_VAL(0x10, 24, 8),
+	},
+};
+
+static void __init ns2_lcpll_ddr_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &lcpll_ddr, NULL, 0, lcpll_ddr_clk,
+			    ARRAY_SIZE(lcpll_ddr_clk));
+}
+CLK_OF_DECLARE(ns2_lcpll_ddr_clk, "brcm,ns2-lcpll-ddr",
+	       ns2_lcpll_ddr_clk_init);
+
+static const struct iproc_pll_ctrl lcpll_ports = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
+	.aon = AON_VAL(0x0, 2, 5, 4),
+	.reset = RESET_VAL(0x4, 2, 1),
+	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),
+	.ndiv_int = REG_VAL(0x8, 4, 10),
+	.pdiv = REG_VAL(0x8, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
+	.status = REG_VAL(0x0, 0, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll_ports_clk[] = {
+	/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
+	 * in NS2.  However, it doesn't appear to be used anywhere, so setting
+	 * it to 0.
+	 */
+	[BCM_NS2_LCPLL_PORTS_WAN_CLK] = {
+		.channel = BCM_NS2_LCPLL_PORTS_WAN_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 18, 12, 0),
+		.mdiv = REG_VAL(0x14, 0, 8),
+	},
+	[BCM_NS2_LCPLL_PORTS_RGMII_CLK] = {
+		.channel = BCM_NS2_LCPLL_PORTS_RGMII_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 19, 13, 0),
+		.mdiv = REG_VAL(0x14, 8, 8),
+	},
+	[BCM_NS2_LCPLL_PORTS_CH2_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_PORTS_CH2_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 20, 14, 0),
+		.mdiv = REG_VAL(0x10, 0, 8),
+	},
+	[BCM_NS2_LCPLL_PORTS_CH3_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_PORTS_CH3_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 21, 15, 0),
+		.mdiv = REG_VAL(0x10, 8, 8),
+	},
+	[BCM_NS2_LCPLL_PORTS_CH4_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_PORTS_CH4_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 22, 16, 0),
+		.mdiv = REG_VAL(0x10, 16, 8),
+	},
+	[BCM_NS2_LCPLL_PORTS_CH5_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_PORTS_CH5_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 23, 17, 0),
+		.mdiv = REG_VAL(0x10, 24, 8),
+	},
+};
+
+static void __init ns2_lcpll_ports_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &lcpll_ports, NULL, 0, lcpll_ports_clk,
+			    ARRAY_SIZE(lcpll_ports_clk));
+}
+CLK_OF_DECLARE(ns2_lcpll_ports_clk, "brcm,ns2-lcpll-ports",
+	       ns2_lcpll_ports_clk_init);
--- a/drivers/clk/bcm/clk-nsp.c
+++ b/drivers/clk/bcm/clk-nsp.c
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/bcm-nsp.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+	.pwr_shift = ps, .iso_shift = is }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+	.p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
+	.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas,    \
+	.ka_width = kaw }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+	.hold_shift = hs, .bypass_shift = bs }
+
+static void __init nsp_armpll_init(struct device_node *node)
+{
+	iproc_armpll_setup(node);
+}
+CLK_OF_DECLARE(nsp_armpll, "brcm,nsp-armpll", nsp_armpll_init);
+
+static const struct iproc_pll_ctrl genpll = {
+	.flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
+	.aon = AON_VAL(0x0, 1, 12, 0),
+	.reset = RESET_VAL(0x0, 11, 10),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.ndiv_int = REG_VAL(0x14, 20, 10),
+	.ndiv_frac = REG_VAL(0x14, 0, 20),
+	.pdiv = REG_VAL(0x18, 24, 3),
+	.status = REG_VAL(0x20, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll_clk[] = {
+	[BCM_NSP_GENPLL_PHY_CLK] = {
+		.channel = BCM_NSP_GENPLL_PHY_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 12, 6, 18),
+		.mdiv = REG_VAL(0x18, 16, 8),
+	},
+	[BCM_NSP_GENPLL_ENET_SW_CLK] = {
+		.channel = BCM_NSP_GENPLL_ENET_SW_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 13, 7, 19),
+		.mdiv = REG_VAL(0x18, 8, 8),
+	},
+	[BCM_NSP_GENPLL_USB_PHY_REF_CLK] = {
+		.channel = BCM_NSP_GENPLL_USB_PHY_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 14, 8, 20),
+		.mdiv = REG_VAL(0x18, 0, 8),
+	},
+	[BCM_NSP_GENPLL_IPROCFAST_CLK] = {
+		.channel = BCM_NSP_GENPLL_IPROCFAST_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 15, 9, 21),
+		.mdiv = REG_VAL(0x1c, 16, 8),
+	},
+	[BCM_NSP_GENPLL_SATA1_CLK] = {
+		.channel = BCM_NSP_GENPLL_SATA1_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 16, 10, 22),
+		.mdiv = REG_VAL(0x1c, 8, 8),
+	},
+	[BCM_NSP_GENPLL_SATA2_CLK] = {
+		.channel = BCM_NSP_GENPLL_SATA2_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 17, 11, 23),
+		.mdiv = REG_VAL(0x1c, 0, 8),
+	},
+};
+
+static void __init nsp_genpll_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
+			    ARRAY_SIZE(genpll_clk));
+}
+CLK_OF_DECLARE(nsp_genpll_clk, "brcm,nsp-genpll", nsp_genpll_clk_init);
+
+static const struct iproc_pll_ctrl lcpll0 = {
+	.flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
+	.aon = AON_VAL(0x0, 1, 24, 0),
+	.reset = RESET_VAL(0x0, 23, 22),
+	.dig_filter = DF_VAL(0x0, 16, 3, 12, 4, 19, 4),
+	.ndiv_int = REG_VAL(0x4, 20, 8),
+	.ndiv_frac = REG_VAL(0x4, 0, 20),
+	.pdiv = REG_VAL(0x4, 28, 3),
+	.status = REG_VAL(0x10, 12, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll0_clk[] = {
+	[BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK] = {
+		.channel = BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 6, 3, 9),
+		.mdiv = REG_VAL(0x8, 24, 8),
+	},
+	[BCM_NSP_LCPLL0_SDIO_CLK] = {
+		.channel = BCM_NSP_LCPLL0_SDIO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 7, 4, 10),
+		.mdiv = REG_VAL(0x8, 16, 8),
+	},
+	[BCM_NSP_LCPLL0_DDR_PHY_CLK] = {
+		.channel = BCM_NSP_LCPLL0_DDR_PHY_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 8, 5, 11),
+		.mdiv = REG_VAL(0x8, 8, 8),
+	},
+};
+
+static void __init nsp_lcpll0_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
+			    ARRAY_SIZE(lcpll0_clk));
+}
+CLK_OF_DECLARE(nsp_lcpll0_clk, "brcm,nsp-lcpll0", nsp_lcpll0_clk_init);
--- a/drivers/clk/berlin/bg2.c
+++ b/drivers/clk/berlin/bg2.c
@@ -490,8 +490,8 @@ static const struct berlin2_gate_data bg2_gates[] __initconst = {
 	{ "usb0",	"perif",	11 },
 	{ "usb1",	"perif",	12 },
 	{ "pbridge",	"perif",	13, CLK_IGNORE_UNUSED },
-	{ "sdio0",	"perif",	14, CLK_IGNORE_UNUSED },
-	{ "sdio1",	"perif",	15, CLK_IGNORE_UNUSED },
+	{ "sdio0",	"perif",	14 },
+	{ "sdio1",	"perif",	15 },
 	{ "nfc",	"perif",	17 },
 	{ "smemc",	"perif",	19 },
 	{ "audiohd",	"audiohd_pll",	26 },

--- a/drivers/clk/berlin/bg2q.c
+++ b/drivers/clk/berlin/bg2q.c
@@ -283,7 +283,7 @@ static const struct berlin2_gate_data bg2q_gates[] __initconst = {
 	{ "usb2",	"perif",	13 },
 	{ "usb3",	"perif",	14 },
 	{ "pbridge",	"perif",	15, CLK_IGNORE_UNUSED },
-	{ "sdio",	"perif",	16, CLK_IGNORE_UNUSED },
+	{ "sdio",	"perif",	16 },
 	{ "nfc",	"perif",	18 },
 	{ "pcie",	"perif",	22 },
 };

--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -24,7 +24,7 @@
 * Traits of this clock:
 * prepare - clk_prepare only ensures that parents are prepared
 * enable - clk_enable only ensures that parents are enabled
- * rate - rate is adjustable.  clk->rate = DIV_ROUND_UP(parent->rate / divisor)
+ * rate - rate is adjustable.  clk->rate = ceiling(parent->rate / divisor)
 * parent - fixed parent.  No clk_set_parent support
 */

@@ -132,7 +132,7 @@ unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate,
 		return parent_rate;
 	}

-	return DIV_ROUND_UP(parent_rate, div);
+	return DIV_ROUND_UP_ULL((u64)parent_rate, div);
 }
 EXPORT_SYMBOL_GPL(divider_recalc_rate);

@@ -210,7 +210,7 @@ static int _div_round_up(const struct clk_div_table *table,
 			 unsigned long parent_rate, unsigned long rate,
 			 unsigned long flags)
 {
-	int div = DIV_ROUND_UP(parent_rate, rate);
+	int div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);

 	if (flags & CLK_DIVIDER_POWER_OF_TWO)
 		div = __roundup_pow_of_two(div);
@@ -227,7 +227,7 @@ static int _div_round_closest(const struct clk_div_table *table,
 	int up, down;
 	unsigned long up_rate, down_rate;

-	up = DIV_ROUND_UP(parent_rate, rate);
+	up = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
 	down = parent_rate / rate;

 	if (flags & CLK_DIVIDER_POWER_OF_TWO) {
@@ -238,8 +238,8 @@ static int _div_round_closest(const struct clk_div_table *table,
 		down = _round_down_table(table, down);
 	}

-	up_rate = DIV_ROUND_UP(parent_rate, up);
-	down_rate = DIV_ROUND_UP(parent_rate, down);
+	up_rate = DIV_ROUND_UP_ULL((u64)parent_rate, up);
+	down_rate = DIV_ROUND_UP_ULL((u64)parent_rate, down);

 	return (rate - up_rate) <= (down_rate - rate) ? up : down;
 }
@@ -318,7 +318,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 		}
 		parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
 					       rate * i);
-		now = DIV_ROUND_UP(parent_rate, i);
+		now = DIV_ROUND_UP_ULL((u64)parent_rate, i);
 		if (_is_best_div(rate, now, best, flags)) {
 			bestdiv = i;
 			best = now;
@@ -342,7 +342,7 @@ long divider_round_rate(struct clk_hw *hw, unsigned long rate,

 	div = clk_divider_bestdiv(hw, rate, prate, table, width, flags);

-	return DIV_ROUND_UP(*prate, div);
+	return DIV_ROUND_UP_ULL((u64)*prate, div);
 }
 EXPORT_SYMBOL_GPL(divider_round_rate);

@@ -358,7 +358,7 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
 		bestdiv &= div_mask(divider->width);
 		bestdiv = _get_div(divider->table, bestdiv, divider->flags,
 			divider->width);
-		return DIV_ROUND_UP(*prate, bestdiv);
+		return DIV_ROUND_UP_ULL((u64)*prate, bestdiv);
 	}

 	return divider_round_rate(hw, rate, prate, divider->table,
@@ -371,7 +371,7 @@ int divider_get_val(unsigned long rate, unsigned long parent_rate,
 {
 	unsigned int div, value;

-	div = DIV_ROUND_UP(parent_rate, rate);
+	div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);

 	if (!_is_valid_div(table, div, flags))
 		return -EINVAL;

--- a/drivers/clk/clk-fractional-divider.c
+++ b/drivers/clk/clk-fractional-divider.c
@@ -7,13 +7,14 @@
 *
 * Adjustable fractional divider clock implementation.
 * Output rate = (m / n) * parent_rate.
+ * Uses rational best approximation algorithm.
 */

 #include <linux/clk-provider.h>
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/slab.h>
-#include <linux/gcd.h>
+#include <linux/rational.h>

 #define to_clk_fd(_hw) container_of(_hw, struct clk_fractional_divider, hw)

@@ -22,7 +23,8 @@ static unsigned long clk_fd_recalc_rate(struct clk_hw *hw,
 {
 	struct clk_fractional_divider *fd = to_clk_fd(hw);
 	unsigned long flags = 0;
-	u32 val, m, n;
+	unsigned long m, n;
+	u32 val;
 	u64 ret;

 	if (fd->lock)
@@ -50,23 +52,33 @@ static unsigned long clk_fd_recalc_rate(struct clk_hw *hw,
 }

 static long clk_fd_round_rate(struct clk_hw *hw, unsigned long rate,
-			      unsigned long *prate)
+			      unsigned long *parent_rate)
 {
 	struct clk_fractional_divider *fd = to_clk_fd(hw);
-	unsigned maxn = (fd->nmask >> fd->nshift) + 1;
-	unsigned div;
+	unsigned long scale;
+	unsigned long m, n;
+	u64 ret;

-	if (!rate || rate >= *prate)
-		return *prate;
+	if (!rate || rate >= *parent_rate)
+		return *parent_rate;

-	div = gcd(*prate, rate);
+	/*
+	 * Get rate closer to *parent_rate to guarantee there is no overflow
+	 * for m and n. In the result it will be the nearest rate left shifted
+	 * by (scale - fd->nwidth) bits.
+	 */
+	scale = fls_long(*parent_rate / rate - 1);
+	if (scale > fd->nwidth)
+		rate <<= scale - fd->nwidth;

-	while ((*prate / div) > maxn) {
-		div <<= 1;
-		rate <<= 1;
-	}
+	rational_best_approximation(rate, *parent_rate,
+			GENMASK(fd->mwidth - 1, 0), GENMASK(fd->nwidth - 1, 0),
+			&m, &n);

-	return rate;
+	ret = (u64)*parent_rate * m;
+	do_div(ret, n);
+
+	return ret;
 }

 static int clk_fd_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -74,13 +86,12 @@ static int clk_fd_set_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct clk_fractional_divider *fd = to_clk_fd(hw);
 	unsigned long flags = 0;
-	unsigned long div;
-	unsigned n, m;
+	unsigned long m, n;
 	u32 val;

-	div = gcd(parent_rate, rate);
-	m = rate / div;
-	n = parent_rate / div;
+	rational_best_approximation(rate, parent_rate,
+			GENMASK(fd->mwidth - 1, 0), GENMASK(fd->nwidth - 1, 0),
+			&m, &n);

 	if (fd->lock)
 		spin_lock_irqsave(fd->lock, flags);
@@ -128,9 +139,11 @@ struct clk *clk_register_fractional_divider(struct device *dev,

 	fd->reg = reg;
 	fd->mshift = mshift;
-	fd->mmask = (BIT(mwidth) - 1) << mshift;
+	fd->mwidth = mwidth;
+	fd->mmask = GENMASK(mwidth - 1, 0) << mshift;
 	fd->nshift = nshift;
-	fd->nmask = (BIT(nwidth) - 1) << nshift;
+	fd->nwidth = nwidth;
+	fd->nmask = GENMASK(nwidth - 1, 0) << nshift;
 	fd->flags = clk_divider_flags;
 	fd->lock = lock;
 	fd->hw.init = &init;

--- a/drivers/clk/clk-max77802.c
+++ b/drivers/clk/clk-max77802.c
@@ -94,5 +94,5 @@ static struct platform_driver max77802_clk_driver = {
 module_platform_driver(max77802_clk_driver);

 MODULE_DESCRIPTION("MAXIM 77802 Clock Driver");
-MODULE_AUTHOR("Javier Martinez Canillas <javier.martinez@collabora.co.uk>");
+MODULE_AUTHOR("Javier Martinez Canillas <javier@osg.samsung.com");
 MODULE_LICENSE("GPL");
--- a/drivers/clk/clk-multiplier.c
+++ b/drivers/clk/clk-multiplier.c
+/*
+ * Copyright (C) 2015 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#define to_clk_multiplier(_hw) container_of(_hw, struct clk_multiplier, hw)
+
+static unsigned long __get_mult(struct clk_multiplier *mult,
+				unsigned long rate,
+				unsigned long parent_rate)
+{
+	if (mult->flags & CLK_MULTIPLIER_ROUND_CLOSEST)
+		return DIV_ROUND_CLOSEST(rate, parent_rate);
+
+	return rate / parent_rate;
+}
+
+static unsigned long clk_multiplier_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct clk_multiplier *mult = to_clk_multiplier(hw);
+	unsigned long val;
+
+	val = clk_readl(mult->reg) >> mult->shift;
+	val &= GENMASK(mult->width - 1, 0);
+
+	if (!val && mult->flags & CLK_MULTIPLIER_ZERO_BYPASS)
+		val = 1;
+
+	return parent_rate * val;
+}
+
+static bool __is_best_rate(unsigned long rate, unsigned long new,
+			   unsigned long best, unsigned long flags)
+{
+	if (flags & CLK_MULTIPLIER_ROUND_CLOSEST)
+		return abs(rate - new) < abs(rate - best);
+
+	return new >= rate && new < best;
+}
+
+static unsigned long __bestmult(struct clk_hw *hw, unsigned long rate,
+				unsigned long *best_parent_rate,
+				u8 width, unsigned long flags)
+{
+	unsigned long orig_parent_rate = *best_parent_rate;
+	unsigned long parent_rate, current_rate, best_rate = ~0;
+	unsigned int i, bestmult = 0;
+
+	if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT))
+		return rate / *best_parent_rate;
+
+	for (i = 1; i < ((1 << width) - 1); i++) {
+		if (rate == orig_parent_rate * i) {
+			/*
+			 * This is the best case for us if we have a
+			 * perfect match without changing the parent
+			 * rate.
+			 */
+			*best_parent_rate = orig_parent_rate;
+			return i;
+		}
+
+		parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
+						rate / i);
+		current_rate = parent_rate * i;
+
+		if (__is_best_rate(rate, current_rate, best_rate, flags)) {
+			bestmult = i;
+			best_rate = current_rate;
+			*best_parent_rate = parent_rate;
+		}
+	}
+
+	return bestmult;
+}
+
+static long clk_multiplier_round_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *parent_rate)
+{
+	struct clk_multiplier *mult = to_clk_multiplier(hw);
+	unsigned long factor = __bestmult(hw, rate, parent_rate,
+					  mult->width, mult->flags);
+
+	return *parent_rate * factor;
+}
+
+static int clk_multiplier_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct clk_multiplier *mult = to_clk_multiplier(hw);
+	unsigned long factor = __get_mult(mult, rate, parent_rate);
+	unsigned long flags = 0;
+	unsigned long val;
+
+	if (mult->lock)
+		spin_lock_irqsave(mult->lock, flags);
+	else
+		__acquire(mult->lock);
+
+	val = clk_readl(mult->reg);
+	val &= ~GENMASK(mult->width + mult->shift - 1, mult->shift);
+	val |= factor << mult->shift;
+	clk_writel(val, mult->reg);
+
+	if (mult->lock)
+		spin_unlock_irqrestore(mult->lock, flags);
+	else
+		__release(mult->lock);
+
+	return 0;
+}
+
+const struct clk_ops clk_multiplier_ops = {
+	.recalc_rate	= clk_multiplier_recalc_rate,
+	.round_rate	= clk_multiplier_round_rate,
+	.set_rate	= clk_multiplier_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_multiplier_ops);
--- a/drivers/clk/clk-si514.c
+++ b/drivers/clk/clk-si514.c
+/*
+ * Driver for Silicon Labs Si514 Programmable Oscillator
+ *
+ * Copyright (C) 2015 Topic Embedded Products
+ *
+ * Author: Mike Looijmans <mike.looijmans@topic.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* I2C registers */
+#define SI514_REG_LP		0
+#define SI514_REG_M_FRAC1	5
+#define SI514_REG_M_FRAC2	6
+#define SI514_REG_M_FRAC3	7
+#define SI514_REG_M_INT_FRAC	8
+#define SI514_REG_M_INT		9
+#define SI514_REG_HS_DIV	10
+#define SI514_REG_LS_HS_DIV	11
+#define SI514_REG_OE_STATE	14
+#define SI514_REG_RESET		128
+#define SI514_REG_CONTROL	132
+
+/* Register values */
+#define SI514_RESET_RST		BIT(7)
+
+#define SI514_CONTROL_FCAL	BIT(0)
+#define SI514_CONTROL_OE	BIT(2)
+
+#define SI514_MIN_FREQ	    100000U
+#define SI514_MAX_FREQ	 250000000U
+
+#define FXO		  31980000U
+
+#define FVCO_MIN	2080000000U
+#define FVCO_MAX	2500000000U
+
+#define HS_DIV_MAX	1022
+
+struct clk_si514 {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	struct i2c_client *i2c_client;
+};
+#define to_clk_si514(_hw)	container_of(_hw, struct clk_si514, hw)
+
+/* Multiplier/divider settings */
+struct clk_si514_muldiv {
+	u32 m_frac;  /* 29-bit Fractional part of multiplier M */
+	u8 m_int; /* Integer part of multiplier M, 65..78 */
+	u8 ls_div_bits; /* 2nd divider, as 2^x */
+	u16 hs_div; /* 1st divider, must be even and 10<=x<=1022 */
+};
+
+/* Enables or disables the output driver */
+static int si514_enable_output(struct clk_si514 *data, bool enable)
+{
+	return regmap_update_bits(data->regmap, SI514_REG_CONTROL,
+		SI514_CONTROL_OE, enable ? SI514_CONTROL_OE : 0);
+}
+
+/* Retrieve clock multiplier and dividers from hardware */
+static int si514_get_muldiv(struct clk_si514 *data,
+	struct clk_si514_muldiv *settings)
+{
+	int err;
+	u8 reg[7];
+
+	err = regmap_bulk_read(data->regmap, SI514_REG_M_FRAC1,
+			reg, ARRAY_SIZE(reg));
+	if (err)
+		return err;
+
+	settings->m_frac = reg[0] | reg[1] << 8 | reg[2] << 16 |
+			   (reg[3] & 0x1F) << 24;
+	settings->m_int = (reg[4] & 0x3f) << 3 | reg[3] >> 5;
+	settings->ls_div_bits = (reg[6] >> 4) & 0x07;
+	settings->hs_div = (reg[6] & 0x03) << 8 | reg[5];
+	return 0;
+}
+
+static int si514_set_muldiv(struct clk_si514 *data,
+	struct clk_si514_muldiv *settings)
+{
+	u8 lp;
+	u8 reg[7];
+	int err;
+
+	/* Calculate LP1/LP2 according to table 13 in the datasheet */
+	/* 65.259980246 */
+	if (settings->m_int < 65 ||
+		(settings->m_int == 65 && settings->m_frac <= 139575831))
+		lp = 0x22;
+	/* 67.859763463 */
+	else if (settings->m_int < 67 ||
+		(settings->m_int == 67 && settings->m_frac <= 461581994))
+		lp = 0x23;
+	/* 72.937624981 */
+	else if (settings->m_int < 72 ||
+		(settings->m_int == 72 && settings->m_frac <= 503383578))
+		lp = 0x33;
+	/* 75.843265046 */
+	else if (settings->m_int < 75 ||
+		(settings->m_int == 75 && settings->m_frac <= 452724474))
+		lp = 0x34;
+	else
+		lp = 0x44;
+
+	err = regmap_write(data->regmap, SI514_REG_LP, lp);
+	if (err < 0)
+		return err;
+
+	reg[0] = settings->m_frac;
+	reg[1] = settings->m_frac >> 8;
+	reg[2] = settings->m_frac >> 16;
+	reg[3] = settings->m_frac >> 24 | settings->m_int << 5;
+	reg[4] = settings->m_int >> 3;
+	reg[5] = settings->hs_div;
+	reg[6] = (settings->hs_div >> 8) | (settings->ls_div_bits << 4);
+
+	err = regmap_bulk_write(data->regmap, SI514_REG_HS_DIV, reg + 5, 2);
+	if (err < 0)
+		return err;
+	/*
+	 * Writing to SI514_REG_M_INT_FRAC triggers the clock change, so that
+	 * must be written last
+	 */
+	return regmap_bulk_write(data->regmap, SI514_REG_M_FRAC1, reg, 5);
+}
+
+/* Calculate divider settings for a given frequency */
+static int si514_calc_muldiv(struct clk_si514_muldiv *settings,
+	unsigned long frequency)
+{
+	u64 m;
+	u32 ls_freq;
+	u32 tmp;
+	u8 res;
+
+	if ((frequency < SI514_MIN_FREQ) || (frequency > SI514_MAX_FREQ))
+		return -EINVAL;
+
+	/* Determine the minimum value of LS_DIV and resulting target freq. */
+	ls_freq = frequency;
+	if (frequency >= (FVCO_MIN / HS_DIV_MAX))
+		settings->ls_div_bits = 0;
+	else {
+		res = 1;
+		tmp = 2 * HS_DIV_MAX;
+		while (tmp <= (HS_DIV_MAX * 32)) {
+			if ((frequency * tmp) >= FVCO_MIN)
+				break;
+			++res;
+			tmp <<= 1;
+		}
+		settings->ls_div_bits = res;
+		ls_freq = frequency << res;
+	}
+
+	/* Determine minimum HS_DIV, round up to even number */
+	settings->hs_div = DIV_ROUND_UP(FVCO_MIN >> 1, ls_freq) << 1;
+
+	/* M = LS_DIV x HS_DIV x frequency / F_XO (in fixed-point) */
+	m = ((u64)(ls_freq * settings->hs_div) << 29) + (FXO / 2);
+	do_div(m, FXO);
+	settings->m_frac = (u32)m & (BIT(29) - 1);
+	settings->m_int = (u32)(m >> 29);
+
+	return 0;
+}
+
+/* Calculate resulting frequency given the register settings */
+static unsigned long si514_calc_rate(struct clk_si514_muldiv *settings)
+{
+	u64 m = settings->m_frac | ((u64)settings->m_int << 29);
+	u32 d = settings->hs_div * BIT(settings->ls_div_bits);
+
+	return ((u32)(((m * FXO) + (FXO / 2)) >> 29)) / d;
+}
+
+static unsigned long si514_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_si514 *data = to_clk_si514(hw);
+	struct clk_si514_muldiv settings;
+	int err;
+
+	err = si514_get_muldiv(data, &settings);
+	if (err) {
+		dev_err(&data->i2c_client->dev, "unable to retrieve settings\n");
+		return 0;
+	}
+
+	return si514_calc_rate(&settings);
+}
+
+static long si514_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *parent_rate)
+{
+	struct clk_si514_muldiv settings;
+	int err;
+
+	if (!rate)
+		return 0;
+
+	err = si514_calc_muldiv(&settings, rate);
+	if (err)
+		return err;
+
+	return si514_calc_rate(&settings);
+}
+
+/*
+ * Update output frequency for big frequency changes (> 1000 ppm).
+ * The chip supports <1000ppm changes "on the fly", we haven't implemented
+ * that here.
+ */
+static int si514_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_si514 *data = to_clk_si514(hw);
+	struct clk_si514_muldiv settings;
+	int err;
+
+	err = si514_calc_muldiv(&settings, rate);
+	if (err)
+		return err;
+
+	si514_enable_output(data, false);
+
+	err = si514_set_muldiv(data, &settings);
+	if (err < 0)
+		return err; /* Undefined state now, best to leave disabled */
+
+	/* Trigger calibration */
+	err = regmap_write(data->regmap, SI514_REG_CONTROL, SI514_CONTROL_FCAL);
+	if (err < 0)
+		return err;
+
+	/* Applying a new frequency can take up to 10ms */
+	usleep_range(10000, 12000);
+
+	si514_enable_output(data, true);
+
+	return err;
+}
+
+static const struct clk_ops si514_clk_ops = {
+	.recalc_rate = si514_recalc_rate,
+	.round_rate = si514_round_rate,
+	.set_rate = si514_set_rate,
+};
+
+static bool si514_regmap_is_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case SI514_REG_CONTROL:
+	case SI514_REG_RESET:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool si514_regmap_is_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case SI514_REG_LP:
+	case SI514_REG_M_FRAC1 ... SI514_REG_LS_HS_DIV:
+	case SI514_REG_OE_STATE:
+	case SI514_REG_RESET:
+	case SI514_REG_CONTROL:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config si514_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = SI514_REG_CONTROL,
+	.writeable_reg = si514_regmap_is_writeable,
+	.volatile_reg = si514_regmap_is_volatile,
+};
+
+static int si514_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct clk_si514 *data;
+	struct clk_init_data init;
+	struct clk *clk;
+	int err;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	init.ops = &si514_clk_ops;
+	init.flags = CLK_IS_ROOT;
+	init.num_parents = 0;
+	data->hw.init = &init;
+	data->i2c_client = client;
+
+	if (of_property_read_string(client->dev.of_node, "clock-output-names",
+			&init.name))
+		init.name = client->dev.of_node->name;
+
+	data->regmap = devm_regmap_init_i2c(client, &si514_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		dev_err(&client->dev, "failed to allocate register map\n");
+		return PTR_ERR(data->regmap);
+	}
+
+	i2c_set_clientdata(client, data);
+
+	clk = devm_clk_register(&client->dev, &data->hw);
+	if (IS_ERR(clk)) {
+		dev_err(&client->dev, "clock registration failed\n");
+		return PTR_ERR(clk);
+	}
+	err = of_clk_add_provider(client->dev.of_node, of_clk_src_simple_get,
+			clk);
+	if (err) {
+		dev_err(&client->dev, "unable to add clk provider\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int si514_remove(struct i2c_client *client)
+{
+	of_clk_del_provider(client->dev.of_node);
+	return 0;
+}
+
+static const struct i2c_device_id si514_id[] = {
+	{ "si514", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, si514_id);
+
+static const struct of_device_id clk_si514_of_match[] = {
+	{ .compatible = "silabs,si514" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, clk_si514_of_match);
+
+static struct i2c_driver si514_driver = {
+	.driver = {
+		.name = "si514",
+		.of_match_table = clk_si514_of_match,
+	},
+	.probe		= si514_probe,
+	.remove		= si514_remove,
+	.id_table	= si514_id,
+};
+module_i2c_driver(si514_driver);
+
+MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
+MODULE_DESCRIPTION("Si514 driver");
+MODULE_LICENSE("GPL");
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -1183,13 +1183,13 @@ static int si5351_dt_parse(struct i2c_client *client,
 		if (of_property_read_u32(child, "reg", &num)) {
 			dev_err(&client->dev, "missing reg property of %s\n",
 				child->name);
-			return -EINVAL;
+			goto put_child;
 		}

 		if (num >= 8 ||
 		    (variant == SI5351_VARIANT_A3 && num >= 3)) {
 			dev_err(&client->dev, "invalid clkout %d\n", num);
-			return -EINVAL;
+			goto put_child;
 		}

 		if (!of_property_read_u32(child, "silabs,multisynth-source",
@@ -1207,7 +1207,7 @@ static int si5351_dt_parse(struct i2c_client *client,
 				dev_err(&client->dev,
 					"invalid parent %d for multisynth %d\n",
 					val, num);
-				return -EINVAL;
+				goto put_child;
 			}
 		}

@@ -1230,7 +1230,7 @@ static int si5351_dt_parse(struct i2c_client *client,
 					dev_err(&client->dev,
 						"invalid parent %d for clkout %d\n",
 						val, num);
-					return -EINVAL;
+					goto put_child;
 				}
 				pdata->clkout[num].clkout_src =
 					SI5351_CLKOUT_SRC_CLKIN;
@@ -1239,7 +1239,7 @@ static int si5351_dt_parse(struct i2c_client *client,
 				dev_err(&client->dev,
 					"invalid parent %d for clkout %d\n",
 					val, num);
-				return -EINVAL;
+				goto put_child;
 			}
 		}

@@ -1256,7 +1256,7 @@ static int si5351_dt_parse(struct i2c_client *client,
 				dev_err(&client->dev,
 					"invalid drive strength %d for clkout %d\n",
 					val, num);
-				return -EINVAL;
+				goto put_child;
 			}
 		}

@@ -1283,7 +1283,7 @@ static int si5351_dt_parse(struct i2c_client *client,
 				dev_err(&client->dev,
 					"invalid disable state %d for clkout %d\n",
 					val, num);
-				return -EINVAL;
+				goto put_child;
 			}
 		}

@@ -1296,6 +1296,9 @@ static int si5351_dt_parse(struct i2c_client *client,
 	client->dev.platform_data = pdata;

 	return 0;
+put_child:
+	of_node_put(child);
+	return -EINVAL;
 }
 #else
 static int si5351_dt_parse(struct i2c_client *client, enum si5351_variant variant)

--- a/drivers/clk/clk-xgene.c
+++ b/drivers/clk/clk-xgene.c
@@ -27,7 +27,6 @@
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/of_address.h>
-#include <asm/setup.h>

 /* Register SCU_PCPPLL bit fields */
 #define N_DIV_RD(src)			(((src) & 0x000001ff))

--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -272,7 +272,7 @@ late_initcall_sync(clk_disable_unused);

 /***    helper functions   ***/

-const char *__clk_get_name(struct clk *clk)
+const char *__clk_get_name(const struct clk *clk)
 {
 	return !clk ? NULL : clk->core->name;
 }
@@ -427,6 +427,11 @@ bool clk_hw_is_prepared(const struct clk_hw *hw)
 	return clk_core_is_prepared(hw->core);
 }

+bool clk_hw_is_enabled(const struct clk_hw *hw)
+{
+	return clk_core_is_enabled(hw->core);
+}
+
 bool __clk_is_enabled(struct clk *clk)
 {
 	if (!clk)
@@ -1685,7 +1690,7 @@ static struct clk_core *__clk_init_parent(struct clk_core *core)
 			"%s: multi-parent clocks must implement .get_parent\n",
 			__func__);
 		goto out;
-	};
+	}

 	/*
 	 * Do our best to cache parent clocks in core->parents.  This prevents
@@ -2932,7 +2937,7 @@ struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data)
 	unsigned int idx = clkspec->args[0];

 	if (idx >= clk_data->clk_num) {
-		pr_err("%s: invalid clock index %d\n", __func__, idx);
+		pr_err("%s: invalid clock index %u\n", __func__, idx);
 		return ERR_PTR(-EINVAL);
 	}

@@ -3055,6 +3060,7 @@ const char *of_clk_get_parent_name(struct device_node *np, int index)
 	u32 pv;
 	int rc;
 	int count;
+	struct clk *clk;

 	if (index < 0)
 		return NULL;
@@ -3080,8 +3086,25 @@ const char *of_clk_get_parent_name(struct device_node *np, int index)

 	if (of_property_read_string_index(clkspec.np, "clock-output-names",
 					  index,
-					  &clk_name) < 0)
-		clk_name = clkspec.np->name;
+					  &clk_name) < 0) {
+		/*
+		 * Best effort to get the name if the clock has been
+		 * registered with the framework. If the clock isn't
+		 * registered, we return the node name as the name of
+		 * the clock as long as #clock-cells = 0.
+		 */
+		clk = of_clk_get_from_provider(&clkspec);
+		if (IS_ERR(clk)) {
+			if (clkspec.args_count == 0)
+				clk_name = clkspec.np->name;
+			else
+				clk_name = NULL;
+		} else {
+			clk_name = __clk_get_name(clk);
+			clk_put(clk);
+		}
+	}
+

 	of_node_put(clkspec.np);
 	return clk_name;
@@ -3179,13 +3202,15 @@ void __init of_clk_init(const struct of_device_id *matches)
 			list_for_each_entry_safe(clk_provider, next,
 						 &clk_provider_list, node) {
 				list_del(&clk_provider->node);
+				of_node_put(clk_provider->np);
 				kfree(clk_provider);
 			}
+			of_node_put(np);
 			return;
 		}

 		parent->clk_init_cb = match->data;
-		parent->np = np;
+		parent->np = of_node_get(np);
 		list_add_tail(&parent->node, &clk_provider_list);
 	}

@@ -3199,6 +3224,7 @@ void __init of_clk_init(const struct of_device_id *matches)
 				of_clk_set_defaults(clk_provider->np, true);

 				list_del(&clk_provider->node);
+				of_node_put(clk_provider->np);
 				kfree(clk_provider);
 				is_init_done = true;
 			}

--- a/drivers/clk/hisilicon/clk-hi6220-stub.c
+++ b/drivers/clk/hisilicon/clk-hi6220-stub.c
@@ -230,7 +230,7 @@ static int hi6220_stub_clk_probe(struct platform_device *pdev)
 	if (IS_ERR(stub_clk->mbox)) {
 		dev_err(dev, "failed get mailbox channel\n");
 		return PTR_ERR(stub_clk->mbox);
-	};
+	}

 	init.name = "acpu0";
 	init.ops = &hi6220_stub_clk_ops;

--- a/drivers/clk/imx/clk-imx25.c
+++ b/drivers/clk/imx/clk-imx25.c
@@ -86,6 +86,16 @@ enum mx25_clks {

 static struct clk *clk[clk_max];

+static struct clk ** const uart_clks[] __initconst = {
+	&clk[uart_ipg_per],
+	&clk[uart1_ipg],
+	&clk[uart2_ipg],
+	&clk[uart3_ipg],
+	&clk[uart4_ipg],
+	&clk[uart5_ipg],
+	NULL
+};
+
 static int __init __mx25_clocks_init(unsigned long osc_rate,
 				     void __iomem *ccm_base)
 {
@@ -233,6 +243,8 @@ static int __init __mx25_clocks_init(unsigned long osc_rate,
 	 */
 	clk_set_parent(clk[cko_sel], clk[ipg]);

+	imx_register_uart_clocks(uart_clks);
+
 	return 0;
 }


--- a/drivers/clk/imx/clk-imx27.c
+++ b/drivers/clk/imx/clk-imx27.c
@@ -47,6 +47,17 @@ static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };
 static struct clk *clk[IMX27_CLK_MAX];
 static struct clk_onecell_data clk_data;

+static struct clk ** const uart_clks[] __initconst = {
+	&clk[IMX27_CLK_PER1_GATE],
+	&clk[IMX27_CLK_UART1_IPG_GATE],
+	&clk[IMX27_CLK_UART2_IPG_GATE],
+	&clk[IMX27_CLK_UART3_IPG_GATE],
+	&clk[IMX27_CLK_UART4_IPG_GATE],
+	&clk[IMX27_CLK_UART5_IPG_GATE],
+	&clk[IMX27_CLK_UART6_IPG_GATE],
+	NULL
+};
+
 static void __init _mx27_clocks_init(unsigned long fref)
 {
 	BUG_ON(!ccm);
@@ -163,6 +174,8 @@ static void __init _mx27_clocks_init(unsigned long fref)

 	clk_prepare_enable(clk[IMX27_CLK_EMI_AHB_GATE]);

+	imx_register_uart_clocks(uart_clks);
+
 	imx_print_silicon_rev("i.MX27", mx27_revision());
 }

@@ -248,8 +261,10 @@ static void __init mx27_clocks_init_dt(struct device_node *np)
 		if (!of_device_is_compatible(refnp, "fsl,imx-osc26m"))
 			continue;

-		if (!of_property_read_u32(refnp, "clock-frequency", &fref))
+		if (!of_property_read_u32(refnp, "clock-frequency", &fref)) {
+			of_node_put(refnp);
 			break;
+		}
 	}

 	ccm = of_iomap(np, 0);

--- a/drivers/clk/imx/clk-imx31.c
+++ b/drivers/clk/imx/clk-imx31.c
@@ -62,7 +62,17 @@ enum mx31_clks {
 static struct clk *clk[clk_max];
 static struct clk_onecell_data clk_data;

-int __init mx31_clocks_init(unsigned long fref)
+static struct clk ** const uart_clks[] __initconst = {
+	&clk[ipg],
+	&clk[uart1_gate],
+	&clk[uart2_gate],
+	&clk[uart3_gate],
+	&clk[uart4_gate],
+	&clk[uart5_gate],
+	NULL
+};
+
+static void __init _mx31_clocks_init(unsigned long fref)
 {
 	void __iomem *base;
 	struct device_node *np;
@@ -132,6 +142,12 @@ int __init mx31_clocks_init(unsigned long fref)

 	imx_check_clocks(clk, ARRAY_SIZE(clk));

+	clk_set_parent(clk[csi], clk[upll]);
+	clk_prepare_enable(clk[emi_gate]);
+	clk_prepare_enable(clk[iim_gate]);
+	mx31_revision();
+	clk_disable_unprepare(clk[iim_gate]);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");

 	if (np) {
@@ -139,6 +155,13 @@ int __init mx31_clocks_init(unsigned long fref)
 		clk_data.clk_num = ARRAY_SIZE(clk);
 		of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 	}
+}
+
+int __init mx31_clocks_init(void)
+{
+	u32 fref = 26000000; /* default */
+
+	_mx31_clocks_init(fref);

 	clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
 	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
@@ -194,12 +217,8 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
 	clk_register_clkdev(clk[iim_gate], "iim", NULL);

-	clk_set_parent(clk[csi], clk[upll]);
-	clk_prepare_enable(clk[emi_gate]);
-	clk_prepare_enable(clk[iim_gate]);
-	mx31_revision();
-	clk_disable_unprepare(clk[iim_gate]);

+	imx_register_uart_clocks(uart_clks);
 	mxc_timer_init(MX31_GPT1_BASE_ADDR, MX31_INT_GPT, GPT_TYPE_IMX31);

 	return 0;
@@ -214,9 +233,13 @@ int __init mx31_clocks_init_dt(void)
 		if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
 			continue;

-		if (!of_property_read_u32(np, "clock-frequency", &fref))
+		if (!of_property_read_u32(np, "clock-frequency", &fref)) {
+			of_node_put(np);
 			break;
+		}
 	}

-	return mx31_clocks_init(fref);
+	_mx31_clocks_init(fref);
+
+	return 0;
 }
--- a/drivers/clk/imx/clk-imx35.c
+++ b/drivers/clk/imx/clk-imx35.c
@@ -84,7 +84,15 @@ enum mx35_clks {

 static struct clk *clk[clk_max];

-int __init mx35_clocks_init(void)
+static struct clk ** const uart_clks[] __initconst = {
+	&clk[ipg],
+	&clk[uart1_gate],
+	&clk[uart2_gate],
+	&clk[uart3_gate],
+	NULL
+};
+
+static void __init _mx35_clocks_init(void)
 {
 	void __iomem *base;
 	u32 pdr0, consumer_sel, hsp_sel;
@@ -220,6 +228,32 @@ int __init mx35_clocks_init(void)

 	imx_check_clocks(clk, ARRAY_SIZE(clk));

+	clk_prepare_enable(clk[spba_gate]);
+	clk_prepare_enable(clk[gpio1_gate]);
+	clk_prepare_enable(clk[gpio2_gate]);
+	clk_prepare_enable(clk[gpio3_gate]);
+	clk_prepare_enable(clk[iim_gate]);
+	clk_prepare_enable(clk[emi_gate]);
+	clk_prepare_enable(clk[max_gate]);
+	clk_prepare_enable(clk[iomuxc_gate]);
+
+	/*
+	 * SCC is needed to boot via mmc after a watchdog reset. The clock code
+	 * before conversion to common clk also enabled UART1 (which isn't
+	 * handled here and not needed for mmc) and IIM (which is enabled
+	 * unconditionally above).
+	 */
+	clk_prepare_enable(clk[scc_gate]);
+
+	imx_register_uart_clocks(uart_clks);
+
+	imx_print_silicon_rev("i.MX35", mx35_revision());
+}
+
+int __init mx35_clocks_init(void)
+{
+	_mx35_clocks_init();
+
 	clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
 	clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
 	clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
@@ -279,25 +313,6 @@ int __init mx35_clocks_init(void)
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
 	clk_register_clkdev(clk[admux_gate], "audmux", NULL);

-	clk_prepare_enable(clk[spba_gate]);
-	clk_prepare_enable(clk[gpio1_gate]);
-	clk_prepare_enable(clk[gpio2_gate]);
-	clk_prepare_enable(clk[gpio3_gate]);
-	clk_prepare_enable(clk[iim_gate]);
-	clk_prepare_enable(clk[emi_gate]);
-	clk_prepare_enable(clk[max_gate]);
-	clk_prepare_enable(clk[iomuxc_gate]);
-
-	/*
-	 * SCC is needed to boot via mmc after a watchdog reset. The clock code
-	 * before conversion to common clk also enabled UART1 (which isn't
-	 * handled here and not needed for mmc) and IIM (which is enabled
-	 * unconditionally above).
-	 */
-	clk_prepare_enable(clk[scc_gate]);
-
-	imx_print_silicon_rev("i.MX35", mx35_revision());
-
 	mxc_timer_init(MX35_GPT1_BASE_ADDR, MX35_INT_GPT, GPT_TYPE_IMX31);

 	return 0;
@@ -305,10 +320,10 @@ int __init mx35_clocks_init(void)

 static void __init mx35_clocks_init_dt(struct device_node *ccm_node)
 {
+	_mx35_clocks_init();
+
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(ccm_node, of_clk_src_onecell_get, &clk_data);
-
-	mx35_clocks_init();
 }
 CLK_OF_DECLARE(imx35, "fsl,imx35-ccm", mx35_clocks_init_dt);
--- a/drivers/clk/imx/clk-imx51-imx53.c
+++ b/drivers/clk/imx/clk-imx51-imx53.c
@@ -130,6 +130,20 @@ static const char *cpu_podf_sels[] = { "pll1_sw", "step_sel" };
 static struct clk *clk[IMX5_CLK_END];
 static struct clk_onecell_data clk_data;

+static struct clk ** const uart_clks[] __initconst = {
+	&clk[IMX5_CLK_UART1_IPG_GATE],
+	&clk[IMX5_CLK_UART1_PER_GATE],
+	&clk[IMX5_CLK_UART2_IPG_GATE],
+	&clk[IMX5_CLK_UART2_PER_GATE],
+	&clk[IMX5_CLK_UART3_IPG_GATE],
+	&clk[IMX5_CLK_UART3_PER_GATE],
+	&clk[IMX5_CLK_UART4_IPG_GATE],
+	&clk[IMX5_CLK_UART4_PER_GATE],
+	&clk[IMX5_CLK_UART5_IPG_GATE],
+	&clk[IMX5_CLK_UART5_PER_GATE],
+	NULL
+};
+
 static void __init mx5_clocks_common_init(void __iomem *ccm_base)
 {
 	clk[IMX5_CLK_DUMMY]		= imx_clk_fixed("dummy", 0);
@@ -310,6 +324,8 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base)
 	clk_prepare_enable(clk[IMX5_CLK_TMAX1]);
 	clk_prepare_enable(clk[IMX5_CLK_TMAX2]); /* esdhc2, fec */
 	clk_prepare_enable(clk[IMX5_CLK_TMAX3]); /* esdhc1, esdhc4 */
+
+	imx_register_uart_clocks(uart_clks);
 }

 static void __init mx50_clocks_init(struct device_node *np)

--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -119,6 +119,7 @@ static unsigned int share_count_ssi1;
 static unsigned int share_count_ssi2;
 static unsigned int share_count_ssi3;
 static unsigned int share_count_mipi_core_cfg;
+static unsigned int share_count_spdif;

 static inline int clk_on_imx6q(void)
 {
@@ -130,6 +131,12 @@ static inline int clk_on_imx6dl(void)
 	return of_machine_is_compatible("fsl,imx6dl");
 }

+static struct clk ** const uart_clks[] __initconst = {
+	&clk[IMX6QDL_CLK_UART_IPG],
+	&clk[IMX6QDL_CLK_UART_SERIAL],
+	NULL
+};
+
 static void __init imx6q_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
@@ -456,7 +463,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_SATA]         = imx_clk_gate2("sata",          "ahb",               base + 0x7c, 4);
 	clk[IMX6QDL_CLK_SDMA]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clk[IMX6QDL_CLK_SPBA]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
-	clk[IMX6QDL_CLK_SPDIF]        = imx_clk_gate2("spdif",         "spdif_podf",        base + 0x7c, 14);
+	clk[IMX6QDL_CLK_SPDIF]        = imx_clk_gate2_shared("spdif",     "spdif_podf",     base + 0x7c, 14, &share_count_spdif);
+	clk[IMX6QDL_CLK_SPDIF_GCLK]   = imx_clk_gate2_shared("spdif_gclk", "ipg",           base + 0x7c, 14, &share_count_spdif);
 	clk[IMX6QDL_CLK_SSI1_IPG]     = imx_clk_gate2_shared("ssi1_ipg",      "ipg",        base + 0x7c, 18, &share_count_ssi1);
 	clk[IMX6QDL_CLK_SSI2_IPG]     = imx_clk_gate2_shared("ssi2_ipg",      "ipg",        base + 0x7c, 20, &share_count_ssi2);
 	clk[IMX6QDL_CLK_SSI3_IPG]     = imx_clk_gate2_shared("ssi3_ipg",      "ipg",        base + 0x7c, 22, &share_count_ssi3);
@@ -541,5 +549,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	/* All existing boards with PCIe use LVDS1 */
 	if (IS_ENABLED(CONFIG_PCI_IMX6))
 		clk_set_parent(clk[IMX6QDL_CLK_LVDS1_SEL], clk[IMX6QDL_CLK_SATA_REF_100M]);
+
+	imx_register_uart_clocks(uart_clks);
 }
 CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
--- a/drivers/clk/imx/clk-imx6sl.c
+++ b/drivers/clk/imx/clk-imx6sl.c
@@ -97,6 +97,7 @@ static struct clk_div_table video_div_table[] = {
 static unsigned int share_count_ssi1;
 static unsigned int share_count_ssi2;
 static unsigned int share_count_ssi3;
+static unsigned int share_count_spdif;

 static struct clk *clks[IMX6SL_CLK_END];
 static struct clk_onecell_data clk_data;
@@ -184,6 +185,12 @@ void imx6sl_set_wait_clk(bool enter)
 		imx6sl_enable_pll_arm(false);
 }

+static struct clk ** const uart_clks[] __initconst = {
+	&clks[IMX6SL_CLK_UART],
+	&clks[IMX6SL_CLK_UART_SERIAL],
+	NULL
+};
+
 static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
@@ -391,7 +398,8 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SL_CLK_PWM4]         = imx_clk_gate2("pwm4",         "perclk",            base + 0x78, 22);
 	clks[IMX6SL_CLK_SDMA]         = imx_clk_gate2("sdma",         "ipg",               base + 0x7c, 6);
 	clks[IMX6SL_CLK_SPBA]         = imx_clk_gate2("spba",         "ipg",               base + 0x7c, 12);
-	clks[IMX6SL_CLK_SPDIF]        = imx_clk_gate2("spdif",        "spdif0_podf",       base + 0x7c, 14);
+	clks[IMX6SL_CLK_SPDIF]        = imx_clk_gate2_shared("spdif",     "spdif0_podf",   base + 0x7c, 14, &share_count_spdif);
+	clks[IMX6SL_CLK_SPDIF_GCLK]   = imx_clk_gate2_shared("spdif_gclk",  "ipg",         base + 0x7c, 14, &share_count_spdif);
 	clks[IMX6SL_CLK_SSI1_IPG]     = imx_clk_gate2_shared("ssi1_ipg",     "ipg",        base + 0x7c, 18, &share_count_ssi1);
 	clks[IMX6SL_CLK_SSI2_IPG]     = imx_clk_gate2_shared("ssi2_ipg",     "ipg",        base + 0x7c, 20, &share_count_ssi2);
 	clks[IMX6SL_CLK_SSI3_IPG]     = imx_clk_gate2_shared("ssi3_ipg",     "ipg",        base + 0x7c, 22, &share_count_ssi3);
@@ -439,5 +447,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)

 	clk_set_parent(clks[IMX6SL_CLK_LCDIF_AXI_SEL],
 		       clks[IMX6SL_CLK_PLL2_PFD2]);
+
+	imx_register_uart_clocks(uart_clks);
 }
 CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
--- a/drivers/clk/imx/clk-imx6sx.c
+++ b/drivers/clk/imx/clk-imx6sx.c
@@ -135,6 +135,12 @@ static u32 share_count_ssi1;
 static u32 share_count_ssi2;
 static u32 share_count_ssi3;

+static struct clk ** const uart_clks[] __initconst = {
+	&clks[IMX6SX_CLK_UART_IPG],
+	&clks[IMX6SX_CLK_UART_SERIAL],
+	NULL
+};
+
 static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
@@ -454,6 +460,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SX_CLK_SPBA]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
 	clks[IMX6SX_CLK_AUDIO]        = imx_clk_gate2_shared("audio",  "audio_podf",        base + 0x7c, 14, &share_count_audio);
 	clks[IMX6SX_CLK_SPDIF]        = imx_clk_gate2_shared("spdif",  "spdif_podf",        base + 0x7c, 14, &share_count_audio);
+	clks[IMX6SX_CLK_SPDIF_GCLK]   = imx_clk_gate2_shared("spdif_gclk",    "ipg",        base + 0x7c, 14, &share_count_audio);
 	clks[IMX6SX_CLK_SSI1_IPG]     = imx_clk_gate2_shared("ssi1_ipg",      "ipg",        base + 0x7c, 18, &share_count_ssi1);
 	clks[IMX6SX_CLK_SSI2_IPG]     = imx_clk_gate2_shared("ssi2_ipg",      "ipg",        base + 0x7c, 20, &share_count_ssi2);
 	clks[IMX6SX_CLK_SSI3_IPG]     = imx_clk_gate2_shared("ssi3_ipg",      "ipg",        base + 0x7c, 22, &share_count_ssi3);
@@ -557,5 +564,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)

 	clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
 	clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
+
+	imx_register_uart_clocks(uart_clks);
 }
 CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -407,6 +407,24 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	clk_data.clk_num = ARRAY_SIZE(clks);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);

+	/*
+	 * Lower the AHB clock rate before changing the parent clock source,
+	 * as AHB clock rate can NOT be higher than 133MHz, but its parent
+	 * will be switched from 396MHz PFD to 528MHz PLL in order to increase
+	 * AXI clock rate, so we need to lower AHB rate first to make sure at
+	 * any time, AHB rate is <= 133MHz.
+	 */
+	clk_set_rate(clks[IMX6UL_CLK_AHB], 99000000);
+
+	/* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */
+	clk_set_parent(clks[IMX6UL_CLK_PERIPH_CLK2_SEL], clks[IMX6UL_CLK_PLL3_USB_OTG]);
+	clk_set_parent(clks[IMX6UL_CLK_PERIPH], clks[IMX6UL_CLK_PERIPH_CLK2]);
+	clk_set_parent(clks[IMX6UL_CLK_PERIPH_PRE], clks[IMX6UL_CLK_PLL2_BUS]);
+	clk_set_parent(clks[IMX6UL_CLK_PERIPH], clks[IMX6UL_CLK_PERIPH_PRE]);
+
+	/* Make sure AHB rate is 132MHz  */
+	clk_set_rate(clks[IMX6UL_CLK_AHB], 132000000);
+
 	/* set perclk to from OSC */
 	clk_set_parent(clks[IMX6UL_CLK_PERCLK_SEL], clks[IMX6UL_CLK_OSC]);


--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -363,6 +363,17 @@ static const char *pll_video_bypass_sel[] = { "pll_video_main", "pll_video_main_

 static struct clk_onecell_data clk_data;

+static struct clk ** const uart_clks[] __initconst = {
+	&clks[IMX7D_UART1_ROOT_CLK],
+	&clks[IMX7D_UART2_ROOT_CLK],
+	&clks[IMX7D_UART3_ROOT_CLK],
+	&clks[IMX7D_UART4_ROOT_CLK],
+	&clks[IMX7D_UART5_ROOT_CLK],
+	&clks[IMX7D_UART6_ROOT_CLK],
+	&clks[IMX7D_UART7_ROOT_CLK],
+	NULL
+};
+
 static void __init imx7d_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
@@ -818,6 +829,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	clks[IMX7D_CSI_MCLK_ROOT_CLK] = imx_clk_gate2("csi_mclk_root_clk", "csi_mclk_post_div", base + 0x4490, 0);
 	clks[IMX7D_AUDIO_MCLK_ROOT_CLK] = imx_clk_gate2("audio_mclk_root_clk", "audio_mclk_post_div", base + 0x4790, 0);
 	clks[IMX7D_WRCLK_ROOT_CLK] = imx_clk_gate2("wrclk_root_clk", "wrclk_post_div", base + 0x47a0, 0);
+	clks[IMX7D_ADC_ROOT_CLK] = imx_clk_gate2("adc_root_clk", "ipg_root_clk", base + 0x4200, 0);

 	clks[IMX7D_GPT_3M_CLK] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);

@@ -856,5 +868,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	/* set uart module clock's parent clock source that must be great then 80MHz */
 	clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);

+	imx_register_uart_clocks(uart_clks);
+
 }
 CLK_OF_DECLARE(imx7d, "fsl,imx7d-ccm", imx7d_clocks_init);
--- a/drivers/clk/imx/clk-pllv2.c
+++ b/drivers/clk/imx/clk-pllv2.c
@@ -77,7 +77,7 @@ struct clk_pllv2 {
 static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
 		u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
 {
-	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+	long mfi, mfn, mfd, pdf, ref_clk;
 	unsigned long dbl;
 	s64 temp;

@@ -87,19 +87,15 @@ static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
 	mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
 	mfi = (mfi <= 5) ? 5 : mfi;
 	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
-	mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
-	/* Sign extend to 32-bits */
-	if (mfn >= 0x04000000) {
-		mfn |= 0xFC000000;
-		mfn_abs = -mfn;
-	}
+	mfn = dp_mfn & MXC_PLL_DP_MFN_MASK;
+	mfn = sign_extend32(mfn, 26);

 	ref_clk = 2 * parent_rate;
 	if (dbl != 0)
 		ref_clk *= 2;

 	ref_clk /= (pdf + 1);
-	temp = (u64) ref_clk * mfn_abs;
+	temp = (u64) ref_clk * abs(mfn);
 	do_div(temp, mfd + 1);
 	if (mfn < 0)
 		temp = -temp;

--- a/drivers/clk/imx/clk-vf610.c
+++ b/drivers/clk/imx/clk-vf610.c
@@ -387,6 +387,7 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)

 	clk[VF610_CLK_SNVS] = imx_clk_gate2("snvs-rtc", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(7));
 	clk[VF610_CLK_DAP] = imx_clk_gate("dap", "platform_bus", CCM_CCSR, 24);
+	clk[VF610_CLK_OCOTP] = imx_clk_gate("ocotp", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(5));

 	imx_check_clocks(clk, ARRAY_SIZE(clk));


--- a/drivers/clk/imx/clk.c
+++ b/drivers/clk/imx/clk.c
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -7,6 +7,7 @@
 extern spinlock_t imx_ccm_lock;

 void imx_check_clocks(struct clk *clks[], unsigned int count);
+void imx_register_uart_clocks(struct clk ** const clks[]);

 extern void imx_cscmr1_fixup(u32 *val);


--- a/drivers/clk/keystone/pll.c
+++ b/drivers/clk/keystone/pll.c
@@ -157,7 +157,7 @@ static struct clk *clk_register_pll(struct device *dev,
 * _of_clk_init - PLL initialisation via DT
 * @node: device tree node for this clock
 * @pllctrl: If true, lower 6 bits of multiplier is in pllm register of
- *		pll controller, else it is in the control regsiter0(bit 11-6)
+ *		pll controller, else it is in the control register0(bit 11-6)
 */
 static void __init _of_pll_clk_init(struct device_node *node, bool pllctrl)
 {

--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
-obj-y += clk-mtk.o clk-pll.o clk-gate.o
+obj-y += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o
 obj-$(CONFIG_RESET_CONTROLLER) += reset.o
 obj-y += clk-mt8135.o
 obj-y += clk-mt8173.o
--- a/drivers/clk/mediatek/clk-apmixed.c
+++ b/drivers/clk/mediatek/clk-apmixed.c
--- a/drivers/clk/mediatek/clk-gate.c
+++ b/drivers/clk/mediatek/clk-gate.c
@@ -97,7 +97,7 @@ const struct clk_ops mtk_clk_gate_ops_setclr_inv = {
 	.disable	= mtk_cg_disable_inv,
 };

-struct clk *mtk_clk_register_gate(
+struct clk * __init mtk_clk_register_gate(
 		const char *name,
 		const char *parent_name,
 		struct regmap *regmap,

--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
--- a/drivers/clk/mediatek/clk-mtk.c
+++ b/drivers/clk/mediatek/clk-mtk.c
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
--- a/drivers/clk/mvebu/clk-cpu.c
+++ b/drivers/clk/mvebu/clk-cpu.c
--- a/drivers/clk/mvebu/common.c
+++ b/drivers/clk/mvebu/common.c
--- a/drivers/clk/mxs/clk-frac.c
+++ b/drivers/clk/mxs/clk-frac.c
--- a/drivers/clk/nxp/clk-lpc18xx-ccu.c
+++ b/drivers/clk/nxp/clk-lpc18xx-ccu.c
--- a/drivers/clk/nxp/clk-lpc18xx-cgu.c
+++ b/drivers/clk/nxp/clk-lpc18xx-cgu.c
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
--- a/drivers/clk/qcom/clk-rcg.c
+++ b/drivers/clk/qcom/clk-rcg.c
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
--- a/drivers/clk/qcom/common.c
+++ b/drivers/clk/qcom/common.c
--- a/drivers/clk/qcom/common.h
+++ b/drivers/clk/qcom/common.h
--- a/drivers/clk/qcom/gcc-apq8084.c
+++ b/drivers/clk/qcom/gcc-apq8084.c
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
--- a/drivers/clk/qcom/gcc-msm8660.c
+++ b/drivers/clk/qcom/gcc-msm8660.c
--- a/drivers/clk/qcom/gcc-msm8916.c
+++ b/drivers/clk/qcom/gcc-msm8916.c
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
--- a/drivers/clk/qcom/gcc-msm8974.c
+++ b/drivers/clk/qcom/gcc-msm8974.c
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
--- a/drivers/clk/qcom/gdsc.h
+++ b/drivers/clk/qcom/gdsc.h
--- a/drivers/clk/qcom/lcc-ipq806x.c
+++ b/drivers/clk/qcom/lcc-ipq806x.c
--- a/drivers/clk/qcom/lcc-msm8960.c
+++ b/drivers/clk/qcom/lcc-msm8960.c
--- a/drivers/clk/qcom/mmcc-apq8084.c
+++ b/drivers/clk/qcom/mmcc-apq8084.c
--- a/drivers/clk/qcom/mmcc-msm8960.c
+++ b/drivers/clk/qcom/mmcc-msm8960.c
--- a/drivers/clk/qcom/mmcc-msm8974.c
+++ b/drivers/clk/qcom/mmcc-msm8974.c
--- a/drivers/clk/rockchip/clk-mmc-phase.c
+++ b/drivers/clk/rockchip/clk-mmc-phase.c
--- a/drivers/clk/rockchip/clk-pll.c
+++ b/drivers/clk/rockchip/clk-pll.c
--- a/drivers/clk/rockchip/clk.c
+++ b/drivers/clk/rockchip/clk.c
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
--- a/drivers/clk/shmobile/clk-mstp.c
+++ b/drivers/clk/shmobile/clk-mstp.c
--- a/drivers/clk/shmobile/clk-r8a7778.c
+++ b/drivers/clk/shmobile/clk-r8a7778.c
--- a/drivers/clk/sirf/clk-atlas7.c
+++ b/drivers/clk/sirf/clk-atlas7.c
--- a/drivers/clk/st/clk-flexgen.c
+++ b/drivers/clk/st/clk-flexgen.c
--- a/drivers/clk/st/clkgen-mux.c
+++ b/drivers/clk/st/clkgen-mux.c
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
--- a/drivers/clk/st/clkgen.h
+++ b/drivers/clk/st/clkgen.h
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
--- a/drivers/clk/clk-bcm2835.c
+++ b/drivers/clk/clk-bcm2835.c
--- a/drivers/clk/sunxi/clk-a10-mod1.c
+++ b/drivers/clk/sunxi/clk-a10-mod1.c
--- a/drivers/clk/sunxi/clk-a10-pll2.c
+++ b/drivers/clk/sunxi/clk-a10-pll2.c
--- a/drivers/clk/sunxi/clk-simple-gates.c
+++ b/drivers/clk/sunxi/clk-simple-gates.c
--- a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c
+++ b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c
--- a/drivers/clk/sunxi/clk-sun6i-apb0.c
+++ b/drivers/clk/sunxi/clk-sun6i-apb0.c
--- a/drivers/clk/sunxi/clk-sun6i-ar100.c
+++ b/drivers/clk/sunxi/clk-sun6i-ar100.c
--- a/drivers/clk/sunxi/clk-sun8i-apb0.c
+++ b/drivers/clk/sunxi/clk-sun8i-apb0.c
--- a/drivers/clk/sunxi/clk-sun9i-mmc.c
+++ b/drivers/clk/sunxi/clk-sun9i-mmc.c
--- a/drivers/clk/tegra/clk-dfll.c
+++ b/drivers/clk/tegra/clk-dfll.c
--- a/drivers/clk/tegra/clk-emc.c
+++ b/drivers/clk/tegra/clk-emc.c
--- a/drivers/clk/tegra/clk-tegra-audio.c
+++ b/drivers/clk/tegra/clk-tegra-audio.c
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
--- a/drivers/clk/tegra/cvb.c
+++ b/drivers/clk/tegra/cvb.c
--- a/drivers/clk/versatile/Kconfig
+++ b/drivers/clk/versatile/Kconfig
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
--- a/include/dt-bindings/clock/at91.h
+++ b/include/dt-bindings/clock/at91.h
--- a/include/dt-bindings/clock/bcm-ns2.h
+++ b/include/dt-bindings/clock/bcm-ns2.h
--- a/include/dt-bindings/clock/bcm-nsp.h
+++ b/include/dt-bindings/clock/bcm-nsp.h
--- a/include/dt-bindings/clock/bcm2835.h
+++ b/include/dt-bindings/clock/bcm2835.h
--- a/include/dt-bindings/clock/exynos7-clk.h
+++ b/include/dt-bindings/clock/exynos7-clk.h
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
--- a/include/dt-bindings/clock/imx6sl-clock.h
+++ b/include/dt-bindings/clock/imx6sl-clock.h
--- a/include/dt-bindings/clock/imx6sx-clock.h
+++ b/include/dt-bindings/clock/imx6sx-clock.h
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
--- a/include/dt-bindings/clock/mt8173-clk.h
+++ b/include/dt-bindings/clock/mt8173-clk.h
--- a/include/dt-bindings/clock/qcom,gcc-apq8084.h
+++ b/include/dt-bindings/clock/qcom,gcc-apq8084.h
--- a/include/dt-bindings/clock/qcom,gcc-msm8916.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8916.h
--- a/include/dt-bindings/clock/qcom,gcc-msm8974.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8974.h
--- a/include/dt-bindings/clock/qcom,mmcc-apq8084.h
+++ b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
--- a/include/dt-bindings/clock/qcom,mmcc-msm8974.h
+++ b/include/dt-bindings/clock/qcom,mmcc-msm8974.h
--- a/include/dt-bindings/clock/r8a7795-cpg-mssr.h
+++ b/include/dt-bindings/clock/r8a7795-cpg-mssr.h
--- a/include/dt-bindings/clock/renesas-cpg-mssr.h
+++ b/include/dt-bindings/clock/renesas-cpg-mssr.h
--- a/include/dt-bindings/clock/sun4i-a10-pll2.h
+++ b/include/dt-bindings/clock/sun4i-a10-pll2.h
--- a/include/dt-bindings/clock/vf610-clock.h
+++ b/include/dt-bindings/clock/vf610-clock.h
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h