Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 3 年多

通知 13
Star 8
Fork 2
K
kernel_linux
提交 f1862b0a 编写于 作者: A Adrian Bunk 提交者： David S. Miller
浏览文件
操作

[SHAPER]: The scheduled shaper removal. 

This patch contains the scheduled removal of the shaper driver.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 9ef32d0d
隐藏空白更改
内联 并排
Showing with 0 addition and 732 deletion
Documentation/feature-removal-schedule.txt
浏览文件 @ f1862b0a
......@@ -280,15 +280,6 @@ Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
What: shaper network driver
When: January 2008
Files: drivers/net/shaper.c, include/linux/if_shaper.h
Why: This driver has been marked obsolete for many years.
It was only designed to work on lower speed links and has design
flaws that lead to machine crashes. The qdisc infrastructure in
2.4 or later kernels, provides richer features and is more robust.
Who: Stephen Hemminger <shemminger@linux-foundation.org>
---------------------------
What: i2c-i810, i2c-prosavage and i2c-savage4
......
Documentation/networking/00-INDEX
浏览文件 @ f1862b0a
......@@ -84,8 +84,6 @@ policy-routing.txt
- IP policy-based routing
ray_cs.txt
- Raylink Wireless LAN card driver info.
shaper.txt
- info on the module that can shape/limit transmitted traffic.
sk98lin.txt
- Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit
Ethernet Adapter family driver info
......
Documentation/networking/shaper.txt 已删除 100644 → 0
浏览文件 @ 9ef32d0d
Traffic Shaper For Linux
This is the current BETA release of the traffic shaper for Linux. It works
within the following limits:
o Minimum shaping speed is currently about 9600 baud (it can only
shape down to 1 byte per clock tick)
o Maximum is about 256K, it will go above this but get a bit blocky.
o If you ifconfig the master device that a shaper is attached to down
then your machine will follow.
o The shaper must be a module.
Setup:
A shaper device is configured using the shapeconfig program.
Typically you will do something like this
shapecfg attach shaper0 eth1
shapecfg speed shaper0 64000
ifconfig shaper0 myhost netmask 255.255.255.240 broadcast 1.2.3.4.255 up
route add -net some.network netmask a.b.c.d dev shaper0
The shaper should have the same IP address as the device it is attached to
for normal use.
Gotchas:
The shaper shapes transmitted traffic. It's rather impossible to
shape received traffic except at the end (or a router) transmitting it.
Gated/routed/rwhod/mrouted all see the shaper as an additional device
and will treat it as such unless patched. Note that for mrouted you can run
mrouted tunnels via a traffic shaper to control bandwidth usage.
The shaper is device/route based. This makes it very easy to use
with any setup BUT less flexible. You may need to use iproute2 to set up
multiple route tables to get the flexibility.
There is no "borrowing" or "sharing" scheme. This is a simple
traffic limiter. We implement Van Jacobson and Sally Floyd's CBQ
architecture into Linux 2.2. This is the preferred solution. Shaper is
for simple or back compatible setups.
Alan
drivers/net/Kconfig
浏览文件 @ f1862b0a
......@@ -3015,23 +3015,6 @@ config NET_FC
adaptor below. You also should have said Y to "SCSI support" and
"SCSI generic support".
config SHAPER
tristate "Traffic Shaper (OBSOLETE)"
depends on EXPERIMENTAL
---help---
The traffic shaper is a virtual network device that allows you to
limit the rate of outgoing data flow over some other network device.
The traffic that you want to slow down can then be routed through
these virtual devices. See
<file:Documentation/networking/shaper.txt> for more information.
An alternative to this traffic shaper are traffic schedulers which
you'll get if you say Y to "QoS and/or fair queuing" in
"Networking options".
To compile this driver as a module, choose M here: the module
will be called shaper. If unsure, say N.
config NETCONSOLE
tristate "Network console logging support (EXPERIMENTAL)"
depends on EXPERIMENTAL
......
drivers/net/Makefile
浏览文件 @ f1862b0a
......@@ -93,7 +93,6 @@ obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_MAC8390) += mac8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
obj-$(CONFIG_SHAPER) += shaper.o
obj-$(CONFIG_HP100) += hp100.o
obj-$(CONFIG_SMC9194) += smc9194.o
obj-$(CONFIG_FEC) += fec.o
......
drivers/net/shaper.c 已删除 100644 → 0
浏览文件 @ 9ef32d0d
/*
* Simple traffic shaper for Linux NET3.
*
* (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
* http://www.redhat.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
* warranty for any of this software. This material is provided
* "AS-IS" and at no charge.
*
*
* Algorithm:
*
* Queue Frame:
* Compute time length of frame at regulated speed
* Add frame to queue at appropriate point
* Adjust time length computation for followup frames
* Any frame that falls outside of its boundaries is freed
*
* We work to the following constants
*
* SHAPER_QLEN Maximum queued frames
* SHAPER_LATENCY Bounding latency on a frame. Leaving this latency
* window drops the frame. This stops us queueing
* frames for a long time and confusing a remote
* host.
* SHAPER_MAXSLIP Maximum time a priority frame may jump forward.
* That bounds the penalty we will inflict on low
* priority traffic.
* SHAPER_BURST Time range we call "now" in order to reduce
* system load. The more we make this the burstier
* the behaviour, the better local performance you
* get through packet clustering on routers and the
* worse the remote end gets to judge rtts.
*
* This is designed to handle lower speed links ( < 200K/second or so). We
* run off a 100-150Hz base clock typically. This gives us a resolution at
* 200Kbit/second of about 2Kbit or 256 bytes. Above that our timer
* resolution may start to cause much more burstiness in the traffic. We
* could avoid a lot of that by calling kick_shaper() at the end of the
* tied device transmissions. If you run above about 100K second you
* may need to tune the supposed speed rate for the right values.
*
* BUGS:
* Downing the interface under the shaper before the shaper
* will render your machine defunct. Don't for now shape over
* PPP or SLIP therefore!
* This will be fixed in BETA4
*
* Update History :
*
* bh_atomic() SMP races fixes and rewritten the locking code to
* be SMP safe and irq-mask friendly.
* NOTE: we can't use start_bh_atomic() in kick_shaper()
* because it's going to be recalled from an irq handler,
* and synchronize_bh() is a nono if called from irq context.
* 1999 Andrea Arcangeli
*
* Device statistics (tx_pakets, tx_bytes,
* tx_drops: queue_over_time and collisions: max_queue_exceded)
* 1999/06/18 Jordi Murgo <savage@apostols.org>
*
* Use skb->cb for private data.
* 2000/03 Andi Kleen
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/init.h>
#include <linux/if_shaper.h>
#include <linux/jiffies.h>
#include <net/dst.h>
#include <net/arp.h>
#include <net/net_namespace.h>
struct shaper_cb {
unsigned long shapeclock; /* Time it should go out */
unsigned long shapestamp; /* Stamp for shaper */
__u32 shapelatency; /* Latency on frame */
__u32 shapelen; /* Frame length in clocks */
__u16 shapepend; /* Pending */
};
#define SHAPERCB(skb) ((struct shaper_cb *) ((skb)->cb))
static int sh_debug; /* Debug flag */
#define SHAPER_BANNER "CymruNet Traffic Shaper BETA 0.04 for Linux 2.1\n"
static void shaper_kick(struct shaper *sh);
/*
* Compute clocks on a buffer
*/
static int shaper_clocks(struct shaper *shaper, struct sk_buff *skb)
{
int t=skb->len/shaper->bytespertick;
return t;
}
/*
* Set the speed of a shaper. We compute this in bytes per tick since
* thats how the machine wants to run. Quoted input is in bits per second
* as is traditional (note not BAUD). We assume 8 bit bytes.
*/
static void shaper_setspeed(struct shaper *shaper, int bitspersec)
{
shaper->bitspersec=bitspersec;
shaper->bytespertick=(bitspersec/HZ)/8;
if(!shaper->bytespertick)
shaper->bytespertick++;
}
/*
* Throw a frame at a shaper.
*/
static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct shaper *shaper = dev->priv;
struct sk_buff *ptr;
spin_lock(&shaper->lock);
ptr=shaper->sendq.prev;
/*
* Set up our packet details
*/
SHAPERCB(skb)->shapelatency=0;
SHAPERCB(skb)->shapeclock=shaper->recovery;
if(time_before(SHAPERCB(skb)->shapeclock, jiffies))
SHAPERCB(skb)->shapeclock=jiffies;
skb->priority=0; /* short term bug fix */
SHAPERCB(skb)->shapestamp=jiffies;
/*
* Time slots for this packet.
*/
SHAPERCB(skb)->shapelen= shaper_clocks(shaper,skb);
{
struct sk_buff *tmp;
/*
* Up our shape clock by the time pending on the queue
* (Should keep this in the shaper as a variable..)
*/
for(tmp=skb_peek(&shaper->sendq); tmp!=NULL &&
tmp!=(struct sk_buff *)&shaper->sendq; tmp=tmp->next)
SHAPERCB(skb)->shapeclock+=SHAPERCB(tmp)->shapelen;
/*
* Queue over time. Spill packet.
*/
if(time_after(SHAPERCB(skb)->shapeclock,jiffies + SHAPER_LATENCY)) {
dev_kfree_skb(skb);
dev->stats.tx_dropped++;
} else
skb_queue_tail(&shaper->sendq, skb);
}
if(sh_debug)
printk("Frame queued.\n");
if(skb_queue_len(&shaper->sendq)>SHAPER_QLEN)
{
ptr=skb_dequeue(&shaper->sendq);
dev_kfree_skb(ptr);
dev->stats.collisions++;
}
shaper_kick(shaper);
spin_unlock(&shaper->lock);
return 0;
}
/*
* Transmit from a shaper
*/
static void shaper_queue_xmit(struct shaper *shaper, struct sk_buff *skb)
{
struct sk_buff *newskb=skb_clone(skb, GFP_ATOMIC);
if(sh_debug)
printk("Kick frame on %p\n",newskb);
if(newskb)
{
newskb->dev=shaper->dev;
newskb->priority=2;
if(sh_debug)
printk("Kick new frame to %s, %d\n",
shaper->dev->name,newskb->priority);
dev_queue_xmit(newskb);
shaper->dev->stats.tx_bytes += skb->len;
shaper->dev->stats.tx_packets++;
if(sh_debug)
printk("Kicked new frame out.\n");
dev_kfree_skb(skb);
}
}
/*
* Timer handler for shaping clock
*/
static void shaper_timer(unsigned long data)
{
struct shaper *shaper = (struct shaper *)data;
spin_lock(&shaper->lock);
shaper_kick(shaper);
spin_unlock(&shaper->lock);
}
/*
* Kick a shaper queue and try and do something sensible with the
* queue.
*/
static void shaper_kick(struct shaper *shaper)
{
struct sk_buff *skb;
/*
* Walk the list (may be empty)
*/
while((skb=skb_peek(&shaper->sendq))!=NULL)
{
/*
* Each packet due to go out by now (within an error
* of SHAPER_BURST) gets kicked onto the link
*/
if(sh_debug)
printk("Clock = %ld, jiffies = %ld\n", SHAPERCB(skb)->shapeclock, jiffies);
if(time_before_eq(SHAPERCB(skb)->shapeclock, jiffies + SHAPER_BURST))
{
/*
* Pull the frame and get interrupts back on.
*/
skb_unlink(skb, &shaper->sendq);
if (shaper->recovery <
SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen)
shaper->recovery = SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen;
/*
* Pass on to the physical target device via
* our low level packet thrower.
*/
SHAPERCB(skb)->shapepend=0;
shaper_queue_xmit(shaper, skb); /* Fire */
}
else
break;
}
/*
* Next kick.
*/
if(skb!=NULL)
mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock);
}
/*
* Bring the interface up. We just disallow this until a
* bind.
*/
static int shaper_open(struct net_device *dev)
{
struct shaper *shaper=dev->priv;
/*
* Can't open until attached.
* Also can't open until speed is set, or we'll get
* a division by zero.
*/
if(shaper->dev==NULL)
return -ENODEV;
if(shaper->bitspersec==0)
return -EINVAL;
return 0;
}
/*
* Closing a shaper flushes the queues.
*/
static int shaper_close(struct net_device *dev)
{
struct shaper *shaper=dev->priv;
struct sk_buff *skb;
while ((skb = skb_dequeue(&shaper->sendq)) != NULL)
dev_kfree_skb(skb);
spin_lock_bh(&shaper->lock);
shaper_kick(shaper);
spin_unlock_bh(&shaper->lock);
del_timer_sync(&shaper->timer);
return 0;
}
/*
* Revectored calls. We alter the parameters and call the functions
* for our attached device. This enables us to bandwidth allocate after
* ARP and other resolutions and not before.
*/
static int shaper_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type,
const void *daddr, const void *saddr, unsigned len)
{
struct shaper *sh=dev->priv;
int v;
if(sh_debug)
printk("Shaper header\n");
skb->dev = sh->dev;
v = dev_hard_header(skb, sh->dev, type, daddr, saddr, len);
skb->dev = dev;
return v;
}
static int shaper_rebuild_header(struct sk_buff *skb)
{
struct shaper *sh=skb->dev->priv;
struct net_device *dev=skb->dev;
int v;
if(sh_debug)
printk("Shaper rebuild header\n");
skb->dev=sh->dev;
v = sh->dev->header_ops->rebuild(skb);
skb->dev=dev;
return v;
}
#if 0
static int shaper_cache(struct neighbour *neigh, struct hh_cache *hh)
{
struct shaper *sh=neigh->dev->priv;
struct net_device *tmp;
int ret;
if(sh_debug)
printk("Shaper header cache bind\n");
tmp=neigh->dev;
neigh->dev=sh->dev;
ret=sh->hard_header_cache(neigh,hh);
neigh->dev=tmp;
return ret;
}
static void shaper_cache_update(struct hh_cache *hh, struct net_device *dev,
unsigned char *haddr)
{
struct shaper *sh=dev->priv;
if(sh_debug)
printk("Shaper cache update\n");
sh->header_cache_update(hh, sh->dev, haddr);
}
#endif
#ifdef CONFIG_INET
static int shaper_neigh_setup(struct neighbour *n)
{
#ifdef CONFIG_INET
if (n->nud_state == NUD_NONE) {
n->ops = &arp_broken_ops;
n->output = n->ops->output;
}
#endif
return 0;
}
static int shaper_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
{
#ifdef CONFIG_INET
if (p->tbl->family == AF_INET) {
p->neigh_setup = shaper_neigh_setup;
p->ucast_probes = 0;
p->mcast_probes = 0;
}
#endif
return 0;
}
#else /* !(CONFIG_INET) */
static int shaper_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
{
return 0;
}
#endif
static const struct header_ops shaper_ops = {
.create = shaper_header,
.rebuild = shaper_rebuild_header,
};
static int shaper_attach(struct net_device *shdev, struct shaper *sh, struct net_device *dev)
{
sh->dev = dev;
sh->get_stats=dev->get_stats;
shdev->neigh_setup = shaper_neigh_setup_dev;
shdev->hard_header_len=dev->hard_header_len;
shdev->type=dev->type;
shdev->addr_len=dev->addr_len;
shdev->mtu=dev->mtu;
sh->bitspersec=0;
return 0;
}
static int shaper_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct shaperconf *ss= (struct shaperconf *)&ifr->ifr_ifru;
struct shaper *sh=dev->priv;
if(ss->ss_cmd == SHAPER_SET_DEV || ss->ss_cmd == SHAPER_SET_SPEED)
{
if(!capable(CAP_NET_ADMIN))
return -EPERM;
}
switch(ss->ss_cmd)
{
case SHAPER_SET_DEV:
{
struct net_device *them=__dev_get_by_name(&init_net, ss->ss_name);
if(them==NULL)
return -ENODEV;
if(sh->dev)
return -EBUSY;
return shaper_attach(dev,dev->priv, them);
}
case SHAPER_GET_DEV:
if(sh->dev==NULL)
return -ENODEV;
strcpy(ss->ss_name, sh->dev->name);
return 0;
case SHAPER_SET_SPEED:
shaper_setspeed(sh,ss->ss_speed);
return 0;
case SHAPER_GET_SPEED:
ss->ss_speed=sh->bitspersec;
return 0;
default:
return -EINVAL;
}
}
static void shaper_init_priv(struct net_device *dev)
{
struct shaper *sh = dev->priv;
skb_queue_head_init(&sh->sendq);
init_timer(&sh->timer);
sh->timer.function=shaper_timer;
sh->timer.data=(unsigned long)sh;
spin_lock_init(&sh->lock);
}
/*
* Add a shaper device to the system
*/
static void __init shaper_setup(struct net_device *dev)
{
/*
* Set up the shaper.
*/
shaper_init_priv(dev);
dev->open = shaper_open;
dev->stop = shaper_close;
dev->hard_start_xmit = shaper_start_xmit;
dev->set_multicast_list = NULL;
/*
* Intialise the packet queues
*/
/*
* Handlers for when we attach to a device.
*/
dev->neigh_setup = shaper_neigh_setup_dev;
dev->do_ioctl = shaper_ioctl;
dev->hard_header_len = 0;
dev->type = ARPHRD_ETHER; /* initially */
dev->set_mac_address = NULL;
dev->mtu = 1500;
dev->addr_len = 0;
dev->tx_queue_len = 10;
dev->flags = 0;
}
static int shapers = 1;
#ifdef MODULE
module_param(shapers, int, 0);
MODULE_PARM_DESC(shapers, "Traffic shaper: maximum number of shapers");
#else /* MODULE */
static int __init set_num_shapers(char *str)
{
shapers = simple_strtol(str, NULL, 0);
return 1;
}
__setup("shapers=", set_num_shapers);
#endif /* MODULE */
static struct net_device **devs;
static unsigned int shapers_registered = 0;
static int __init shaper_init(void)
{
int i;
size_t alloc_size;
struct net_device *dev;
char name[IFNAMSIZ];
if (shapers < 1)
return -ENODEV;
alloc_size = sizeof(*dev) * shapers;
devs = kzalloc(alloc_size, GFP_KERNEL);
if (!devs)
return -ENOMEM;
for (i = 0; i < shapers; i++) {
snprintf(name, IFNAMSIZ, "shaper%d", i);
dev = alloc_netdev(sizeof(struct shaper), name,
shaper_setup);
if (!dev)
break;
if (register_netdev(dev)) {
free_netdev(dev);
break;
}
devs[i] = dev;
shapers_registered++;
}
if (!shapers_registered) {
kfree(devs);
devs = NULL;
}
return (shapers_registered ? 0 : -ENODEV);
}
static void __exit shaper_exit (void)
{
int i;
for (i = 0; i < shapers_registered; i++) {
if (devs[i]) {
unregister_netdev(devs[i]);
free_netdev(devs[i]);
}
}
kfree(devs);
devs = NULL;
}
module_init(shaper_init);
module_exit(shaper_exit);
MODULE_LICENSE("GPL");
include/linux/Kbuild
浏览文件 @ f1862b0a
......@@ -231,7 +231,6 @@ unifdef-y += if_ltalk.h
unifdef-y += if_link.h
unifdef-y += if_pppol2tp.h
unifdef-y += if_pppox.h
unifdef-y += if_shaper.h
unifdef-y += if_tr.h
unifdef-y += if_tun.h
unifdef-y += if_vlan.h
......
include/linux/if_shaper.h 已删除 100644 → 0
浏览文件 @ 9ef32d0d
#ifndef __LINUX_SHAPER_H
#define __LINUX_SHAPER_H
#ifdef __KERNEL__
#define SHAPER_QLEN 10
/*
* This is a bit speed dependent (read it shouldn't be a constant!)
*
* 5 is about right for 28.8 upwards. Below that double for every
* halving of speed or so. - ie about 20 for 9600 baud.
*/
#define SHAPER_LATENCY (5*HZ)
#define SHAPER_MAXSLIP 2
#define SHAPER_BURST (HZ/50) /* Good for >128K then */
struct shaper
{
struct sk_buff_head sendq;
__u32 bytespertick;
__u32 bitspersec;
__u32 shapelatency;
__u32 shapeclock;
unsigned long recovery; /* Time we can next clock a packet out on
an empty queue */
spinlock_t lock;
struct net_device *dev;
struct net_device_stats* (*get_stats)(struct net_device *dev);
struct timer_list timer;
};
#endif
#define SHAPER_SET_DEV 0x0001
#define SHAPER_SET_SPEED 0x0002
#define SHAPER_GET_DEV 0x0003
#define SHAPER_GET_SPEED 0x0004
struct shaperconf
{
__u16 ss_cmd;
union
{
char ssu_name[14];
__u32 ssu_speed;
} ss_u;
#define ss_speed ss_u.ssu_speed
#define ss_name ss_u.ssu_name
};
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或